Max file size that can be broadcasted

Hi
COuld any one let me know what is the maximun file size of the report output that can be broadcasted through information broadcasting? I have a failure in broadcaster when the file size is too large around 6 MB if it is zipped?
Regards,
Kishore

Hi Kishore,
If you are feeling the file size is large then data in the report must be more. The broadcaster is may be failing because of large instead of size. So the restrict the selections and run the broadcast settings.
Hope tis helps,
Regards,
anil

Similar Messages

What is the max file size that a Adapter Engine [J2SE] can handle ?

We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
Some of the options, we are considering :
- Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
- What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.

Hi,
j2se is not a good option here
if you have 4gb then you need a copy solution
a) build an proxy that will just copy the file from sender dest to receiver
b) build an adapter that will do the same as proxy)
this way processing of this message will be controlled with SAP PI/XI
it will be as quick as copy & paste of the 4gb file
I did the a) for one of the flow for 300 mb and it works perfectly
Regards,
Michal Krawczyk

Maximum file size that can be ulpoaded at one time

Hi All,
I have an issue in which user is uploading 200 MB file in to KM. But she is getting "IisProxy.dll: 502 Bad Gateway" error.
I have tried uploading a document and was successfull in uploading 93 MB document and while uploading above this (93MB) i was getting Page cannot be found error.
I have found in refrences of same as in SAP note 820028 and on
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/25/b0a4f6f2b03a43a727a165a4d6a555/frameset.htm
Please advice me what shoud be the maximum file size that can be uploaded at one time.
Thanks in advance.
Honey

Hi,
By default the maximum file size is 128 MB. You can configure that in visual administrator.
http://help.sap.com/saphelp_nw04/helpdata/en/05/35e13d8ee48f5ee10000000a114084/frameset.htm
If you as administrator need to upload a file with larger size, you can use km file repository like etc. and can upload file from OS.
Regards
Baby

Maximum XML file size that can parsed with c++ XML parser

Hi!
what is the maximum file size that can be parsed using the xml parser(version 1) for c++ on linux .
i'm getting an error(error no 231) when i try to parse an XML file of 3MB on Red Hat Linux 6.1
Regards
anjana

moving to xml db forum

HT4436 What is the maximum file size that can be attached to an outgoing email on my iCloud account?

What is the maximum file size that can be attached to an outgoing email on my iCloud account?

20mb, but I would suggest leaving a little space. 15 is reliable.

Is there a maximum file size that can be converted to pdf

I have a 448mb tiff that I want to convert to a pdf. However, Acrobat gives me the error that the file is damaged or there is some other problem. Photoshop CS5 opens the file with no problem. It won't convert it to a PDF either.
The tiff is at 200 resolution. If I reduce it to 60 it will convert.
Am I trying to do something that can't be done?

Open in PS and print to the Adobe PDF printer. However, a 448MB TIFF seems huge. At 200 dpi and 24 bit color (millions of colors) that leaves you with a 61inX61in graphic. Even at 600dpi, that is 20X20.
For us to help you, please indicate exactly how you are trying to convert from PhotoShop. For Acrobat, are you trying to open the TIFF in Acrobat directly? Is the TIFF a single sheet, or multiple sheet? There are a lot of unanswered questions for us.
One of the limitations on file size is the size of the temporary PS file that is created in the PDF creation process. This PS file is created in the TEMP folder that is limited by MS. So you might try emptying the TEMP folder.

HT4101 Is there a maximum file size that can be transferred with the camera connection kit?

I'm trying to transfer images from my Canon 5DmkII with the lightning to USB adapter and it will not transfer the 9.9MP or 21MP RAW images. Is there a size limit on the file that can be transferred?

iPad iOS 6 Update - Camera Connection Kit Fix
http://www.georgewheelhouse.com/blog/2012/10/ipad-ios-6-update---camera-connecti on-kit-fix
 Cheers, Tom

What is the maximum excel file size that can be converted to pdf?

Currently I am trying to convert a excel file of 37 mb by using pdf generator. And it fails with the exception as java.lang.OutOfMemoryError: Java heap space; nested exception is: java.lang.OutOfMemoryError: Java heap space.
Waiting someone help! T_T

Open in PS and print to the Adobe PDF printer. However, a 448MB TIFF seems huge. At 200 dpi and 24 bit color (millions of colors) that leaves you with a 61inX61in graphic. Even at 600dpi, that is 20X20.
For us to help you, please indicate exactly how you are trying to convert from PhotoShop. For Acrobat, are you trying to open the TIFF in Acrobat directly? Is the TIFF a single sheet, or multiple sheet? There are a lot of unanswered questions for us.
One of the limitations on file size is the size of the temporary PS file that is created in the PDF creation process. This PS file is created in the TEMP folder that is limited by MS. So you might try emptying the TEMP folder.

Maximum file size that can be generated with an FTP adapter

Hy
At our 'Vehicle Order Management'-project within Toyota Moter Europe we process in- and outbound interface by using FTP adapters in interconnect. For certain outbound interface we generate semi-large amount of files >9MB. Due to parameter setting this amount can be bigger. What is the maximum amount of files that interconnect can generate and how is this being determined?
Is the maximum size determined by the filesystem or setting in interconnect or ... Please point me in a direction where to find this information.
Kind Regards

WELCOME TO Digitizing Group
You seem to be looking for quality machine embroidery designs. If you are looking for embroidery digitizing, then
digitizing-group was exactly the right place. we, a team of digitizers with more than 10 years experiences would like to
offer you the best service with a very reasonable price. We provide 24-hours service 7 days a week, and you will
receive your completed file within 24 hours after sending us your artwork. Certainly the rush tape can be provided in
just a few hours, and all with the same flat rate!!!
. Extremely fast turnaround time
. Competitive Pricing
. Available Format
. Easy payment - we take company check, Visa, Mastercard, T/T, Western union.
. High quality design that will keep your customers bring continuous order.
We would like you to try our service. We are confident that you will be impressed by our quick turnover, excellent
digitizing quality, and low prices.
And that will help you succeed with keeping your customers coming back. Therefore we have always focused on how
we can improve the quality and serive. please contact us,
Tel: 1-801-938 6699

What is the max Data size that can be converted to PDF using CR 2008 SP5

Hi All,
When I supply more data to convert to PDF using XML data source I get exception on converting the stream
Exception :
Error generating PDF. Exception:Object reference not set to an instance of an object.
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType)
But it works with smaller size like 50-60K of data.
I searched about the exception and the results were mentioning about wrong placement of runtimes.
But my doubt is if the problem is with runtimes then why it works with less data?
Thanks.

Version of CR (be precise...)?
Version of .NET?
OS?
Is this on your dev computer or after you deploy the app?
Add code used in the app please.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Max file size

What (if any) is the max file size FMLE can make to serve from FMS? Do the profiles have any relation?
Thanks in advance
Matthew

I think you misunderstand the concept of streaming. FMS isn't reading from a file when it streams your video, it reads from your stream. This is dynamic - frames are pushed up to the FMS constantly. As such there is no "size" limitation per se. As long as you are streaming from FLME to the FMS the FMS will stream your data to people that connect to it.
However if you plan to create a file and upload that to the FMS for video-on-demand (i.e. not a "live" stream) that may be a different story. Not sure if there is a size limitation there.

What is the maximum File Size we can send

Hi Experts,
I have done simple scenario file to file without IR.
I have one doubt here, what is maximum file size (Text and XML)we can transfer from source to target ftps.
text file = file size?
xml file = file size?
Thanks for inputs.
Bhaskar

There is no limit to the message size (file size) that can be transfered.....the only thing required is that your server should have the necessary configuration (hardware) to handle a file of a particlar size.
this question is actually asked a couple of times and in there people have even mentioned the transfer of files in 1GB ... so it all depends on your Hardware.
Regards,
Abhishek.

Max file size OSB 11g can process

Hi,
What is the max file size OSB 11g can process? We want to do a POC that picks a file from FTP do some complex transformation and post to another FTP server.
So in this scenario what can be the max file size OSB 11g can handle?
Regards,
Abdul

Again, there is no fixed limit for message size JMS can handle. It depends on the Heap size available. But, In my experience JMS will reduce the practical limit much more than File/FTP transport. I have seen that you start getting a lot of OOM errors if you try to put very large messages on JMS.
Also, if you are going to transform the payload after reading via FTP/File transport, then you will need to initialize the complete payload in memory which will restrict the maximum message size which can be processed properly.
For large Files using Content Streaming is recommended but you can not access the streamed content within a message flow (hence no transformations).
Another limiting factor is CPU utilization, doing complex transformations on large payload will consume a lot of CPU which will effect any other processes running on the same machine (could be another service instance on OSB itself).
OSB is supposed to work with lightweight, stateless and fast processing. If you have very complex transformations, invest in an XML Appliance.
If you need to transfer huge files, then use ODI.

Maximum file size that OSB can handle for JMS

Hi,
We have a requirement to process 60MB xml files over JMS in Oracle Service Bus. While prototyping this we are facing heap space errors.
Can somebody let me know what is the maximum file size that we can process? The scenario is as below.
JMS --> OSB --> JMS --> OSB --> JMS
Thanks

if you don't need to access the entire content of the message, you can try using content streaming
(see this OSB - Iterating over large XML files with content streaming discussion)
See also here http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1110513 for best practices.
Otherwise I have noticed myself that OSB is very hungry in memory when loading large messages. I had trouble even with a 5 MB binary file being loaded - this would take 500 MB RAM. in these cases I would rather look for ETL tools such as Oracle Data Integrator or Open Source Pentaho.

What is the file size that ODI can handle

Hi all,
What is the file size that ODI can handle ?????????
can it handle 1GB files without any issues?????????
Thanks
Phani

Hi Phani,
It also depends on the type of file you are transfering. If have used the XML file around 1GB and the performance is very low. But we used the Database schema to load the XML data and the performance had increased very well.
I never tried the large flat files load around 1GB.
Thanks,
Yellanki

Max file size that can be broadcasted

Similar Messages

Maybe you are looking for