Max GPT partition size for Windows 2008R2

Is the max partition size 256tb -64K? for 64k stripe size?? What is the max?

Hi Jared,
From Windows Server 2003 SP1, Windows XP x64 edition, and later versions, the maximum raw partition of
18 exabytes can be supported. (Windows file systems currently are limited to 256 terabytes each.)
GPT disks support partitions of up to 18 exabytes (EBs) in size and up to 128 partitions per disk.
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535(v=vs.85).aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Similar Messages

  • Appropriate partition size for windows 7?

    i just bought windows 7 and want to install it on my mac pro that i recently bought. i was wondering what's an appropriate partition size for windows 7 and if it matters whether i install the 32 bit or the 64 bit? i'm mainly using it for a game (league of legends) if that makes an difference. thank you for your time.
    -Nikko

    If you have more than 4GB of RAM or are planning on some time in the future to install more than 4GB of RAM use the 64 bit version. The 32 bit version can not address more than 4GB. Windows programs are now 64 bit. Your computer is 64 bit. 64 bit Windows runs 32 bit Windows programs. So there is no reason to install 32 bit Windows.
    Windows 7 requires a lot of space. Then you need space for any data you create. I think that at a minimum you need 50GB plus data. I would opt for larger rather than smaller so the minimum I would partition is 100GB. If you conserve space now by making a small partition it is likely you will fill up that space quickly. You'll then wish you had made a larger partition initially. Search this forum, there are several questions on how to make a Boot Camp partition larger.

  • What is the maximum partition size for windows on 128GB MBA?

    I want to use Windows 7 as my primary OS on my 128GB MBA. How big can I make my windows partition? Is there anything special I need to do?

    You have two options.
    1. Put OSX on an external drive - OS X: Installing OS X on an external volume - Apple Support and make your internal disk to be fully Windows.
    2. Use minimal OSX size between 16-32G, and the remainder for Windows.

  • Recommended Boot Camp Partition Size for Windows XP

    All,
    What size is recommended for a Windows XP Boot Camp Partition? 100Gb? 50Gb?
    Main use is to run a few programs that are not available for Mac. Most everything else will be transferred over.
    Thanks
    PAX
    JD

    Kalebd wrote:
    All,
    What size is recommended for a Windows XP Boot Camp Partition? 100Gb? 50Gb?
    Main use is to run a few programs that are not available for Mac. Most everything else will be transferred over.
    Depending on the programs you want to install, you can get by with very little. I have virtual XP systems that live within 8GB virtual disks. If you've got the drive space, go for ~30GB. I've found that to be a nice size for running Windows 7 within, and thus you likely won't have to mess with re-partitioning should you update the OS in the future.

  • Expanding Partition Size for Windows

    I used Bootcamp to set up a partition on my computer for Windows, and spent some time tweaking... and then found that I was nearly out of space when selecting a 40GB partition. So as much as it pained me to do so, I deleted the partition, and then tried to start all over. But now, on that screen of the Bootcamp setup, it won't allow me to specify a partition larger than 44GB, and as you can see from the screen shot below, I have plenty of excess capacity on my computer (after deleting several things, emptying my trash and rebooting).
    Any ideas on why I won't "slide" any further?

    I'm afraid not. The easy way is to make a bootable backup of your hard drive. Boot from the backup, erase the internal drive, then restore the backup from the backup drive. The tool for that is Disk Utility.
    Clone the internal drive to an external backup drive.
    Boot from the Recovery HD on the newly made clone.
    Erase the internal drive.
    Restore the clone to the internal drive.
    Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon of the external drive's Recovery HD.
      5. Click on the arrow button below the icon.
    When the Utility Menu appears select Disk Utility and click on the Continue button. Select the OS X volume on the internal drive from the sidebar list, click on the Erase tab in Disk Utility's main window, set the format to Mac OS Extended, Journaled and click on the Erase button.
    Restore the clone
         1. Select the destination volume from the left side list.
         2. Click on the Restore tab in the DU main window.
         3. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         4. Select the source volume from the left side list and drag it to
             the Source entry field.
         5. Double-check you got it right, then click on the Restore button.
    Source means the external backup drive. Destination means the internal startup drive.

  • Increasing partition size for windows

    can i increase the size of my windows partition with bootcamp?
    i installed windows at first just so that i can use some of the program and files that runs on windows. And i thought since i was going to format that partition in the FAT way then i can access files on OS X. But after the installation of windows i realize that i'd have to go to OS X and drag that file into the windows partition and then restart in windows to use them. And now it's too late (or not if you guys tell me that i can increase its size) because i've only gave the windows partition 5 GBs of capacity and after installation only 1.7 GBs is left free. What if i want to watch a movie i downloaded that is 2 GB in size? i can't possibly drag that into my windows partition after i downloaded it with OS X because it will be too big for it. What can i do now?

    I believe you have to go back to the original mac partition and start from there. Just like it was a new set up of boot camp.
    TTFN
    Doc

  • Increasing partition size for Windows 7 Ultimate in a clean install

    I am running XP on a 32GB partition through bootcamp. I'm using OS 10.5.8 for my MacPro.
    I wanted to do a clean install of Windows 7 Ultimate (upgrade) in a larger partition than before, probably a new one.
    I have about 400GB of available space for this and wanted to know if it was possible before starting out. I ran out of space with 32GB for XP and figure a good 100GB partition would be safe with all the updates etc.
    Any help would be greatly appreciated!
    Message was edited by: ringoya_tokyo

    I believe you have to go back to the original mac partition and start from there. Just like it was a new set up of boot camp.
    TTFN
    Doc

  • HT4818 What is the best Partition size for a windows 7 Home Premium. I'm trying to install Windows using Boot camp

    What is the best Partition size for a windows 7 Home Premium. I'm trying to install Windows using Boot camp

    Go into your system preferences and click the startup disk icon then select your Mac HD. 

  • Max Expansion card size for treo palm 700wx

    I can't seem to find the max expansion card size for a treo palm 700wx. I purchased a 4gb Scan Disk which should be compatible with most ever device so expect that the hardware dosen't support up to 4gb. If anyone has futher information on this I would appriciate it.
    Post relates to: Treo 700wx (Verizon)

    that I have used with no problem is a Transcend 150X Secure Digital Card 4GB.  My pictures and tunes along with backups reside on it.  Had it for a year. In use 2200.03MB with 1718.30MB free currently.
    Post relates to: Treo 700wx (Verizon)

  • Is it possible for Windows 2008R2 Domain Controllers to audit when a programs are installed/uninstalled on clients and send alerts to Admins?

    We have a program called Audit Wizard that we used with Windows 2003 that monitored all clients and alerted my department when a program was installed/uininstalled. since upgrading to windows server 2008R2, the program no longer works correctly.
    So we are wondering if it is possible for Windows 2008R2 Domain Controllers, running at a 2008R2 forest and domain level) to be able to audit when a programs are installed/uninstalled on clients and send alerts to our Admins?
    If so, How?
    Thanks in advance for your help!
    Pete Macias

    Hi Pete,
    >>So we are wondering if it is possible for Windows 2008R2 Domain Controllers, running at a 2008R2 forest and domain level) to be able to audit when a programs are installed/uninstalled on clients and send alerts to our Admins?
    As far as I know, group policy can't help us do this. If you are interested, we can take a look at System Center Operation Manager and ask for suggestions in the following SCOM forum.
    Operations Guide for System Center 2012 - Operations Manager
    https://technet.microsoft.com/en-us/library/hh212887.aspx
    System Center Operation Manager
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
    Best regards,
    Frank Shen 
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Partition size for Leopard

    I am in the process of planning a new internal hard drive for my iMac G5 and am hoping for some advice. It will be a dual boot Tiger/Leopard partitioned 1TB drive (already purchased). I would like to maximize space in my third partition for non-sensitive files (music, photos, 40 hours and growing of home video) while leaving adequate space on the boot partitions to run the OS comfortably.
    Any suggestions for partition sizes for Leopard and Tiger?
    - Shawn

    I read yesterday that a new Firewire standard is to be announced in October raising throughput to that seen on eSata drives. So maybe the new crop of external drives that will hit the market will make some of this issue disappear.
    I am about to rebuild my Mac (500gb drive, Intel Core duo) and was thinking only three partitions would be necessary (OS X, BOOTCAMP / WinXP and DATA). I have an external video scratch disk for FCE.
    However I am unsure how to ensure my USR folders are mapped to the DATA partition so that the 50GB is only for OS X and the applications. I have noticed the Library \ Application Support folder can get quite large depending on the apps installed.
    Is there some sort of white paper or thread that gives advice on this?
    Thanks
    Eric

  • UEFI + GPT + SSD + HDD, partition layout for windows and archlinux

    Hi,
    I have got new computer based on UEFI. It has one ssd and one hdd. I would like to install windows 7 64bit and archlinux, both disks GPT partitioned.
    I would like to do it this way:
    SSD:
    /dev/sda1 - UEFI partition
    /dev/sda2 - windows system
    HDD:
    /dev/sdb1 - windows data
    /dev/sdb2 - /
    /dev/sdb3 - /home
    /dev/sdb4 - swap
    my question is: where should I put /boot partition? Should it be on SSD or HDD? Will placing /boot partition on SSD make bootup faster?

    I don't use a separate /boot partition. In my opinion, that's only needed if you boot multiple operating systems (ie. more than 2), because it can help with not having to worry about reinstalling the bootloader if you ever decide to reinstall one of them or replace it with something else. Some people cringe at the thought of not having a bootloader to get into a pretty GUI where they can click stuff. But it's really not that difficult to boot a "live" Linux distribution from a USB stick, chroot and reinstall the bootloader. I mean, you are using Arch. Using the command line should be a cinch.

  • Installing Boot Camp - There is only one partition available for Windows

    I have a brand new Mac Mini. Ran Boot Camp assistant and created Windows partition - 80 GB. Then when instructed, inserted Windows XP install disc. It went through some install steps then came to screen where you chose the partition to install Windows. There was only one partition showing - Partition 1. I think that's the Mac partition, so I quit install, removed partition with Boot Camp and tried again, this time setting Windows partition at 32GB. Insert Windows install disc, same result - only Partition 1. I called Apple support, we did it all again - same result. They had me completely reformat my Mac disc with the OSX discs, then run Boot Camp assistant and set partition to 32 GB. Same result - only Partition 1 is available. The Windows install disc I am using is the same disc I used to put Windows on my son's MacBook about 9 months ago.
    I need this Mac Mini to run both OS. What to do?

    Use NTFS for Windows and buy Paragon NTFS for OS X
    You can also try Paragon HFS for Windows
    As long as you are using for data and backups, you can leave the drive as GPT too.
    I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
    And yes you can use Windows to create a partition.
    Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
    MBR has trouble with 3TB drives.

  • Partition size for clones

    Hi all
    in preparing an external drive to clone (CC Cloner) both my macbook pro and g5 would people recommend partition sizes on the external that matchthe physical size of the drives to be cloned or partition sizes that match the data used on the drives to be cloned plus a bit of free space ?
    Kind Regards
    Eric

    At least 44GB, with more depending on
    what you do
    amount of RAM
    64-bit (very slightly larger but better memory management)
    page file
    hibernation
    Just room to breath is a factor.
    SP1 and above require 10GB of free space
    Any OS needs a 20% free space to function properly
    What MS and Apple post are not partition sizes but how large Windows 7 is (16GB for 32-bit, 20GB for 64-bit) though.
    apps, data, cache, thumbnails, photos, etc on top of that.
    And how small your hard drive free space. You need to leave OS X with free space to function and grow too.
    There is a forum for Windows on Mac / Boot Camp, and there is a forum for MacBook Pro owners too (not workstation community this was in)

  • [ SOLVED ] Partition Sizes For New Arch Install ?

    Hi All
    I have just picked up a new 250gb HDD and i'm going to do a clean install of arch & openbox and would like to know what people would suggest for various partition sizes ?
    /root
    /swap
    etc
    I have 4gb ram so not sure if swap is a required !
    Many Thanks
    Last edited by whitetimer (2010-11-15 09:58:47)

    +1 on KlavKalashj's advice!
    When the installer warns you about there not being a /boot partition either(besides the swap), then just select ignore, it's no problem at all!
    If you do want a swap partiton(and don't hibernate), then I would say max 1gb imho.
    For an Openbox based install, then I would say 10GB is more than enough(mine's 5, although with a tiling WM: Musca).
    I don't keep the cache forever increasing, but empty it at times where I know everything is OK. Also, there's scripts available which cleans the cache up, like e.g. only keeping one revision back of each package.
    Last edited by mhertz (2010-11-15 09:47:18)

Maybe you are looking for

  • "Activity type 420 1002 2393074 in the fiscal year 2010 not valid" PM03

    We have an issue with the PM03 for the year 2010. "When the scheduler tries to schedule the pm..He gets an error "Activity type 420 1002 2393074 in the fiscal year 2010 not valid" The planner will close the work order then re-open it. The error will

  • Socket communication between Java and Python aplications.

    I'm try to connect a pyhton client to a Java server through Socket. The problem is that the python client never receive anything. I'm using a ObjectOutputStream to send the msgs. Does anyone have any idea how make this works?!

  • Catalyst driver install issue

    Hey! I have an ATI Mobility radeon HD 5650 and i needed to run openCL on it, so i wanted to install catalyst-utils and the opencl-catalyst, however, i first installed the xf86-video-ati driver, so i tried installed using pacman -S catalyst-utils And

  • BrowserKeystore$JSSPasswordCallbackInvocationHandler behaviour

    Hi all, excuse me if this isn�t the correct forum. i've configured jss in firefox and deployed a small applet that uses JSS classes. I've implemented a PasswordCallback following http://www.mozilla.org/projects/security/pki/jss/javadoc/org/mozilla/js

  • Update to 10.5.7

    I've just run the update through Software Update with absolutely no problems, although it took a while. When I looked at Applications under System Profiler, I could see why - a huge number of apps were changed in some way, including Safari to 3.2.3,