Max line and Max line length restriction in FTP
Hi all,
We are using a FTP adapter in our BPEL service to read the input files from a FTP server location.
Our service fails when the input file has more than 99 lines or if the length of the line exceeds 9 characters.
i.e:
Max allowed characters in a line (Max line length) is 9
Max allowed lines in the file is 99
If the above limit is exceeded we get the error saying that the FTP authentication failed or permission denied error.
Do we need to set the Max line length and Max line parameters anywhere in weblogic console or in JCA properties.
Kindly help us resolve the issue. Thanks in advance.
Regards,
Balaji R
We do not have any schema for the file data since we are reading the file content as attachment.
Similar Messages
-
Is there a DIRECT link between SD schedule lines and delivery lines?
Is there a direct link (db table) between schedule lines on a sales order (VBEP) and the delivery lines (LIPS)?
Is there a function module to retrieve the data?
Example-
One order line with 3 schedule lines.
Each schedule line is for 2 units (total of 6 units).
Three deliveries made. 1st is for 2 units, 2nd is for 1 unit (backorder), 3rd is for 3 units.
You can use document flow (table VBFA) or examine the SD document in the delivery line (LIPS) and link the delivery line to the order line. The schedule line already references the order line.
I am using math to decrement the schedule lines used and make the link between VBEP and LIPS. It works fine. I need four records back....
1st schedule line for 2 units uses delivery 123
2nd schedule line for 1 unit (partial) uses delivery 124
2nd schedule line for 1 unit (partial) uses delivery 125
3rd schedule line for 2 units uses delivery 125
Like I said, it works. Just wondering if I missed a more direct link.As far as Db link is concern , I dont remember exactly , but 3 years before I had written a report which see Sales order schedule lines and devilry note lines against sales order. If you see process wise . when ever you create PO ( production order you assign some qty using 101 movement type .. and against production order you also give sales order . When you do delivery ( run seclude run ) it delivers against that material number , its movement is 601 ...
but I remember theres a link between these tables, VBAP,VBFA AND VBEP , LIPS ... against every sales order you can see sales invoice ( VBRP,VBRK) and you can also see your delivery note number in document flow .
I hope thisll give you some guide line, as right now I can not tell you the exact business process but I remember I written a report in SD 4 years before , in which they required Delivery against production order and sales order ... One more thing you also have production order reference on delivery item number. ( field :Empst ) . I think in my project they were maintaining this field .
Thanks -
Relation column for Tax Line and Item Line in AP Invoice Ditributions 11i
Hi,
We have requirement of populating Line_Group_Number in AP_invoice_lines_interface for a related item line and a Tax Lines. We are getting the data for AP invoices from 11i.
Could you please let us know column which can show the relation between a Tax Line and a corresponding Item Line in AP_invoice_distributions Table in 11i.
Thanks,
Bhanu Kiranhi,
If you are using business area method then you want to create all sales tax GL with business area optional. And You create one GL like Tax clearing account(business area optional)and assign the same in OBXM against all the sales tax GLs.
Then you want to run F.5d and F.5e on everymonth.
govind. -
Mapping for item line and condition line
I saw mapping specification.Can someone tell what is mappig toitem line and what is mapping to condition line?Tell me with an example.
Hi Subash,
In mapping specification mapping to line item means direct mapping the source to target. Condition Mapping means its based on some condition you map source to target.
Find Examaple.
IDOC EDI
Source----
--Target
E2EDK01005-BELNR----
Set BIG.02=BELNR
E2EDK02-BELNR,QUALF='001'----
if QUALF='001' SET BIG.04=BELNR.
In this case if there is only one condition in the segment better to check conditon in the segment level then it wont create the segment itself if condition fails.
Thanks,
RamuV -
Hi Experts ,
I am doing a report on material history where I need to find out open orders....if suppose a matnr does'nt have Po then also I need to display as it will have open PR.
Now I want to delete the line where ebeln eq space but I can't put the condition as:
delete it_first where ebeln = space as single lines will also get deleted.
My condition should be if a matnr is displayed in more than 1 line and if ebeln eq space
delete it_first.
loop at it_first. " I facing problem with this code
if it_first-wemng GE it_first-menge.
move ' ' to it_first-ebeln.
move ' ' to it_first-menge
move ' ' to it_first-wenge
modify it_first.
endif.
endloop.
after the above statement my O/P is as below
werks , matnr , ebeln , menge , wemng
UNIT1 , ABCD , 450025612 , 256 , 125
UNIT1 , ABCD , 450012345 , 756 , 456
UNIT1 , ABCD , --SPACE-- , 0.00 , 0.00 "Need to delete this line
UNIT1 , ABCD , --SPACE-- , 0.00 , 0.00 "Need to delete this line
UNIT2 , BEDF , --SPACE-- , 0.00 , 0.00 " this needs to be displayed (just 4 matnr)
Please advice
KarthikHi Karthik,
Hi Dileep,
Its working, but only for the first matnr ....but the matnr diplayed after the first matnr is not working..
Thanks
Karthik
Just to Memorise and confirm, in your post I seen you need to delete only EBELN's when space(null or blank)
Only if there is an order or duplicate... {as commented beside in the code}.
The code works fine... Here is the code What i tested in my system and working fine.
If problem still exists, please update with more records, lets say 7 -15 records,,,,
REPORT ZSAMPLE.
DATA P_MATNR TYPE MATNR.
DATA: BEGIN OF IT_FIRST OCCURS 0,
WERKS TYPE WERKS,
MATNR TYPE MATNR,
EBELN TYPE EBELN,
MENGE TYPE MENGE,
WEMNG TYPE WEMNG,
END OF IT_FIRST.
IT_FIRST-WERKS = 'UNIT1'.IT_FIRST-MATNR = 'ABCD'.IT_FIRST-EBELN = '450025612'.IT_FIRST-MENGE = '256'.IT_FIRST-WEMNG = '125'.
APPEND IT_FIRST.
IT_FIRST-WERKS = 'UNIT1'.IT_FIRST-MATNR = 'ABCD'.IT_FIRST-EBELN = '450012345'.IT_FIRST-MENGE = '756'.IT_FIRST-WEMNG = '456'.
APPEND IT_FIRST.
IT_FIRST-WERKS = 'UNIT1'.IT_FIRST-MATNR = 'ABCD'.IT_FIRST-EBELN = ' '.IT_FIRST-MENGE = '0'.IT_FIRST-WEMNG = '0'.
APPEND IT_FIRST.
IT_FIRST-WERKS = 'UNIT1'.IT_FIRST-MATNR = 'ABCD'.IT_FIRST-EBELN = ' '.IT_FIRST-MENGE = '0'.IT_FIRST-WEMNG = '0'.
APPEND IT_FIRST.
IT_FIRST-WERKS = 'UNIT2'.IT_FIRST-MATNR = 'BEDF'.IT_FIRST-EBELN = ' '.IT_FIRST-MENGE = '0'.IT_FIRST-WEMNG = '0'.
APPEND IT_FIRST.
IT_FIRST-WERKS = 'UNIT2'.IT_FIRST-MATNR = 'BEDF'.IT_FIRST-EBELN = ' '.IT_FIRST-MENGE = '0'.IT_FIRST-WEMNG = '0'.
APPEND IT_FIRST.
IT_FIRST-WERKS = 'UNIT1'.IT_FIRST-MATNR = 'BEDF'.IT_FIRST-EBELN = '450012345'.IT_FIRST-MENGE = '756'.IT_FIRST-WEMNG = '456'.
APPEND IT_FIRST.
SORT IT_FIRST BY MATNR ASCENDING EBELN DESCENDING.
LOOP AT IT_FIRST.
IF P_MATNR EQ IT_FIRST-MATNR AND IT_FIRST-EBELN EQ SPACE.
DELETE IT_FIRST.
ENDIF.
P_MATNR = IT_FIRST-MATNR .
ENDLOOP.
Thanks & regards,
Dileep .C -
MR11 Report with document lines and not line items
Dear All,
We are currently using the transaction code MR11 to display the open GRs where the system displays them per line item (shows 10 lines for example for 1 PO document).
We want the report to only show the PO or GR document number (unique) and not the material lines (just one line with the document number so each line would be a different document number). Is there a similar report that can do this or even can the MR11 Trx be altered to achieve this?
We have tried the filter but it does not seem to work.
Any help would be much appreciated.
Regards,
GeorgeHi raghavendra,
Thanks for your quick response.I know that MR11 is used for account maintenance but it is also a report since it shows the open GRs that have not yet been turned to Invoice Verification.
The transaction you are suggesting is for open purchase orders and not open Goods Receipt (even though we 101 says Open Goods Receipt).
Maybe another Selection criteria would be helpful or other report all together.
Waiting for your feedback.
Regards,
George -
SRST/CME max-dn and dual-line confirmation
Hi,
Can I please confirm the following:
If my router supports max-dn of 960 and all of my handsets are registered as dual-line does this actually mean my max-dn is only really 480 as there would be a 'virtual port' to allow the extra channel for phone lines?
If this is the case can I force VG224 SCCP configured endpoints to register as single line only.
Thanks
Heathif we maxed out the the ephones and DNs according to what the platform allows, could it greatly impact the performance of the router upon provisioning?
-
I only print the top line and bottom line, content in middle doesn't print
When I print an email only the very top line at the top of the page prints and the very bottom line at the very bottom of the page print. For example the bottom line says page 1 of 1 and then on the other side the date and time. Top line has the web address. When I open internet explorer and print and email I have no problems. This just started out of the blue a few updates ago.
If there isn't a Page Setup in the Print Dialog, open Text Edit>Edit>Page Setup, check borders there or use Custom Page setup & save.
-
Getting max date and max time column plz help
hi
i have a table with suppose 7 columns with date and time column seperate
i want to design a query which retrieve the current or the maxmum date with the max of time in that date.
columns a ,b,c, date, time
22-05-07 20
23-05-07 50
24-05-07 40
25-05-07 30
22-05-07 20
ans " suppose current date is 25 "
a,b,c,25-05-07,40try like this..
SQL> with rt as
2 (select 1 col1,'22-05-07' dt, 20 tm from dual union all
3 select 2,'23-05-07', 50 from dual union all
4 select 3,'24-05-07', 40 from dual union all
5 select 4,'25-05-07', 30 from dual union all
6 select 5,'25-05-07', 45 from dual union all
7 select 6,'22-05-07', 20 from dual)
8 select col1,dt,tm from
9 (select col1,
10 dt,
11 max(tm) over(partition by to_date(dt,'DD-MM-RR') order by col1 desc) tm,
12 row_number() over(partition by to_date(dt,'DD-MM-RR') order by col1 desc) rn
13 from rt where to_date(dt,'DD-MM-RR') in (select max(to_date(dt,'DD-MM-RR')) dt from rt))
14 where rn = 1;
COL1 DT TM
5 25-05-07 45
SQL> -
How do I format a second line (and subsequent lines) of text in a form field?
For example, I don't want this:
1. Blanskgljdslgjsldjglksjdgljsdklgjskldjgklsjdgkljsldkgjklsdjglkjsdgkljskldgjlskdjglksjdogk jskldgjlskdgjlskdjgkls
lkjsdlktjlkjglsjldgj
I would like the second line indented with the first.
Thanks!This is possible for a user to configure if the field is set up to allow rich text formatting. Press Ctrl+E to bring up the Properties bar:
-
Hi All
Been working on my T-SQL skills using the AdventureWorks 2008 database.
I want to get the Employee with the highest rate as well as the highest SickLeaveHours
This is what I have so far, am I heading in the right direction?
with cte as (
select he.EmployeeID, he.SickLeaveHours, ep.Rate
, ROW_NUMBER () over (order by ep.rate desc) rn
from HumanResources.Employee he
inner join HumanResources.EmployeePayHistory ep on he.EmployeeID = ep.EmployeeID
where he.SickLeaveHours = (select MAX (he.SickLeaveHours) from HumanResources.Employee he))
select * from cte where rn = 1this is enough
SELECT *
FROM
select he.EmployeeID, he.SickLeaveHours, ep.Rate
, DENSE_RANK() over (order by ep.rate desc,he.SickLeaveHours desc) rn
from HumanResources.Employee he
inner join HumanResources.EmployeePayHistory ep on he.EmployeeID = ep.EmployeeID
)t
WHERE Rn = 1
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
After I read an e-mail, and after I hit the back space arrow, to look at my list of e-mails, the previously read e-mail still shows up in bold type. Usually when an e-mail is read, and you then look at your list of e-mails, the e-mails that have been read show up in light grey type so you can distinguish these e-mails from the ones that have not been read. Why is this happening? It is very difficult to remember which ones I have read when I am looking at over 100 unread e-mails.
== This happened ==
Every time Firefox opened
== yesterdayFirefox is not an email program, so your problem depends on what site you are using for email. What site are you using?
-
This happens when I have the Menu Bar hidden. It happened with the betas and now with the RC
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
* [[Troubleshooting extensions and themes]]
In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available" -
Grid lines and guide lines are too thin and not visible (Retina display)
How do I increase the "thickness" of them? I have no other idea how to make them more visible. They are just not visible enough.
I have tried every color. They are so thin with the settings I'm using for the display (I can't change the settings to smaller resolution)
On the solid color they are ok, but besides that... almost useless (and the grid, and the guides).I asked about your Photoshop version to make sure it would have Retina display support. I use Windows with a 30inch 1920x1200 main display, but just tried the Photoshop 200% UI feature, and while it made the Photoshop UI nice and chunky, Guides were still just one pixel wide. So AFAICT the only workaround is to change the guide colour.
If it is a big problem, start a thread on Photoshop feedback site, or search the existing threads to see what has already been said about guides. -
How to change category on open and closed PO and Requisition lines
We realized a little late that our category definition needs change. But when we change the category definitions (including structure) how do we change the existing PO lines and Requisition lines to have the new categories? We checked for any APIs, but there are none. What other option do we have?
changing the name of the home directory and the login name is not advisable. it can be done
http://www.macworld.com/article/132693/2008/03/changeshortusername.html
but a better way would be to make a new user account using system preferences->accounts. call it whatever you want. log into that and delete the old account. since you just got this computer you don't have any data on it yet, right?
Maybe you are looking for
-
How do I get rid of this on my screen? "In order to continue installation, please close the following application: iPhoto" Just popped up...grr
-
IPod Video Specs Inaccurate? I can sync/play 720x400 mp4 files
The stated max resolution for iPod videos on the tech spec pages is 640 maximum width for both h.264 and mpeg4. I was ripping some files for play on my aTV at 720 resolution (both h.264 and mp4 for comparison) and noticed that some of them were synci
-
War file and access control with WebLogic
I am trying to put some access control on different files in my war-file, but just can't get it to work... It seems like all roles defined in weblogic.properties gives the user access to all files in the war. I just don't understand the connections b
-
Windows authentication from an enterprise application
Hi All, Does anyone has any idea how to go about implementing windows active directory authentication from an enterprise application.The requirement is that the users across a particular domain should be able to use the application by using their win
-
I have hade pse 5 for several years. All of a sudden, I can't save edits. I get error message, "Unable to save. Computer error." What to do?