MAX Lockup at Refresh and Labview 6.0.2 Lockup when opening some of the SubVI

I have Labview6.0.2 standard installation on a PC with Windows 2000. After mass compiling some Test Executive 5.1.1 and Labview 5.1.1 VI libraries. Some of the SubVIs that were created in Labview6.0.2 originally opened properly no longer launched when trying to open from Labview6.0.2, and opening these VIs also locked up Labview. MAX also locked up at Refreshing. No error message showed when MAX and Labview Locked up. Any comments on what might be causing this is appreciated. Thanks a lot.

Hello Valen Li,
Thank you for contacting National Instruments.
Try reinstalling LabVIEW. The problems you are experiencing may be associated with LabVIEW and not with the VIs themselves. Also, before compiling, try opening your LabVIEW 5.1.1 VIs in LabVIEW 6.0.2 and resaving them. The following link will take you to an article about mass compiling and exactly what it does. It may help shed some light on the cause of your problem.
http://digital.ni.com/public.nsf/websearch/654877E62A97B72986256C95006F9B24?OpenDocument
If you have further questions or problems, let me know.
Matthew C
Applications Engineer
National Instruments

Similar Messages

The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Unable to delete email from trash bin. How do I do this? If I select and chose delete, it doesn't. What am I doing wrong? My grand daughte is using my iPad and I don't want her to see some of the mail there.

Unable to delete email from trash bin. How do I do this? If I select and chose delete, it doesn't. What am I doing wrong? My grand daughte is using my iPad and I don't want her to see some of the mail there.

There are two ways that should work. When you are in the trash folder, you can swipe on the email in the list - left to right - and a red Delete button should pop up. Or you can select - Edit - at the top of the list of messages and then select the message and tap delete.
Not sure exactly how this works - but if you have restrictions enabled - especially since you let your grandchild use the device - that may be restricting what you can do in the mail app. Go to Settings>General>Restrictions. If you have it set to on - turn it off or see if you have mail restricted.

I downloded iphoto 11 9.2 and when opened it for the first time and the program started to update my iPhoto library the file got corrupted. That has happened in the two macs I have (both of them rather new and updated to last Lion version 10.7.2).

I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?

In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

I have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows

i have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows a couple of folders to click upon to view pictures. when i open the pictures folder and delete all the pictures , even then a lots of unclickable windows icons remain
i have attached the picture of that window's screenshot. plus when ever i try deleting them it says,
please help!.. i shall be really thankful.
iPhone 5s, iOS 8

I have the same issue and it has to do with iOS 8.2
Apple, please mend this ASAP. Really stupid change since iOS 8.1
If you for some reason must have many different folder make sure that you put the newst photo in the last folder so one can easily find a photo when I don't want to copy all photos to, let' say, my friend computer.

I have Windows 8 and Itunes 11.1.2. When I click on the Itunes desktop shortcut, Itunes won't open. I just the icon go to the taskbar and nothing more. Please help.

I have Windows 8 and Itunes 11.1.2. When I click on the Itunes desktop shortcut, Itunes won't open. I just the icon go to the taskbar and nothing more. Please help.

Delete the shortcut and make a new one. The 'real' application will probably be fine if you launch it from the Start/Programs menu.

HT2506 I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I too experienced the same issue. Here are my details:
Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port. What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol. At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally. Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite? I’m hoping that a software update will fix this issue.

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp b

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?

Hi Berriedale,
Please try the below steps and check.
Turn off any antivirus or software security program.
Download the update patch 11.0.10 manually from the below link and run it.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
Regards,
Anand

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?

I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?

Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

Recently, when opening some websites, I can't view the page and now must open them with google chrome or internet explorer in order to view them

Recently, when opening some websites, I can't view the page and now must open them with google chrome or internet explorer in order to view them

Hi headshot, <br /> Sorry you are having problems.
Are you seeing any error message or notification ? <br />If so what ?
If the page fails to load try clearing Reloading with the Ctrl F5 shortcut to force loading without the old new cached files. If that does not help try cache and clearing cookies for that site.
* Also see [[Websites don't load - troubleshoot and fix error messages]]
* [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

I have a MacPro with OSX 10.9.4 and I photo 9.5. When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer. Now IPhoto is just spinning and will not let me quit or Upgrade.

I have a MacPro with OSX 10.9.4 and I photo 9.5. When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer. Now IPhoto is just spinning and will not let me quit or Upgrade.

BAckup your iPhoto library, depress and hold the option and command keys while launching iPhoto until the first aid window comes up and repair permissions and if necessary rebuild your database
LN

On my TV, I can access my library and view movie rental trailers but when I actually order the move, it says unable to access server. Any ideas?

On my TV, I can access my library and view movie rental trailers but when I actually order the movie, it says unable to access server. Any ideas?

Have you tried rebooting or restoring?

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

Hi Francis,
Are you getting kernel panics?
http://support.apple.com/kb/TS3742
http://www.thexlab.com/faqs/kernelpanics.html

MAX Lockup at Refresh and Labview 6.0.2 Lockup when opening some of the SubVI

Similar Messages

Maybe you are looking for