Max. members of a group??

Hello,
does anybody know the maximum number of members in a group of a solaris 5.9-system?
Environment:
Solaris-Samba-Fileserver; connected to an ADS.
Problem:
members of groups with a large number of members, can not be displayed with the command "groups [User]"; the command get stuck; a truss-command will end in an endless-loop

Get-ADGroupMember -Identity (Read-Host 'Group name') -Recursive |
Select Name,SamAccountName |
Export-Csv .\groupMembers.csv -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Similar Messages

How can I query all the members of a group using querbuilder? I cannot find any related properties

How can I query all the members of a group using querbuilder? I cannot find any related properties describing members under /home/groups/s/sample_group in jcr repository.

Hi,
FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
FieldPoint systems are now setup in Measurement and Automation Explorer (MAX). Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX. The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
Regards,
Hal L.

Can not add members to a Group as Group Administrator

Hi,
My collegue has created a Group 'WE_PM_group' and added me to that Group with role 'Group Administrator'.
But when I connect to the 'Create Group Or Add New Members' tool, then after SSO and acknowledging the 'read and understood Beehive Online Guidelines', it does not show the 'WE_PM_group' (it shows no Groups) and I can only Create a group.
My question : how can I add members to the Group that my collegue created and for which I am Group Administrator ?
Note : When I connect to the BeehiveOnline Administration Tool, I indeed see my e-mail address within the Group 'WE_PM_group' and with the correct role (Group Administrator)
Thanks for your help,
Peter

If you go to the APEX app and have any group - like your Administrator - you will have a list of group - each of them is a hyperlink. Click on the group and the Group settings will be displayed - one of the fields is the Manager email. Get him/her to puit your email in that field, separated by a comma, and you are good to go.
Phil

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
This would be an SMS group similar to an email listserv but running on the SMS network
I have seen private individuals offering this service
It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
Steve

I think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.

How to retrieve Min(startDate) and Max(endDate) for different groups of data? (sql server 2000)

My sample dataset (below) contains 3 groups -- 'a', 'b', 'c'. I need to retrieve the Min(startDate) and Max(EndDate) for each group so that the output looks something like this (date format not an issue):
fk   minStart      maxEnd
a    1/13/1985    12/31/2003
b    2/14/1986    12/31/2003
c    4/26/1987    12/31/2002
What is the Tsql to perform this type of operation? Note: the actual data resides in a sql server 2000 DB. If the Tsql is different between version 2000 and the later versions -- I would be grateful for both versions of the Tsql
--I noticed that multiple lines of Insert values doesn't work in Sql Server 2000 -- this sample is in Sql Server 2008
create table #tmp2(rowID int Identity(1,1), fk varchar(1), startDate datetime, endDate datetime)
insert into #tmp2
values
('a', '1/13/1985', '12/31/1999'),
('a', '3/17/1992', '12/31/1997'),
('a', '4/21/1987', '12/31/2003'),
('b', '2/14/1986', '12/31/2003'),
('b', '5/30/1993', '12/31/2001'),
('b', '6/15/1994', '12/31/2003'),
('b', '7/7/2001', '12/31/2003'),
('c', '4/26/1987', '12/31/1991'),
('c', '8/14/1992', '12/31/1998'),
('c', '9/10/1995', '12/31/2002'),
('c', '10/9/1996', '12/31/2000')
Thanks
Rich P

Rich
It is unclear what you are trying to achieve, you said that it is SQL Server 2000 but provide a sample data with SQL Server 2008 syntax
Is it possible to use UNION ALL for your queries to make its one
select * from
select * from #tmp2 t1 where exists
(select * from (select top 1 * from #tmp2 t2 where t2.fk = t1.fk order by t2.startdate) x where x.rowID = t1.rowID)
UNION ALL
select * from #tmp2 t1 where exists
(select * from (select top 1 * from #tmp2 t2 where t2.fk = t1.fk order by t2.Enddate desc) x where x.rowID = t1.rowID)
as der order by fk
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to edit members of a group in Address Book?

I need to add and delete members of a group in my Address Book. There seems to be no Edit function, though, and although I managed to type in a new name, when I opened the group, the new name had disappeared (and the old, deleted names reappeared).
Underlying that problem - and the real problem that drives me to write you - is that there is apparently no HELP function that would contain lot of How-To-Do-Directions. Having that would improve the program significantly.

Hi jnewcomer,
I believe this to be a Thunderbird Question. I will move ya over to that component.

How to add members in REDO group in RAC

Hi All
I need to know the syntax to add members in redolog group in RAC database. Currently i have 4 groups (2 belonging to each thread) and one member in each group. I want to multiplex.
Thanks in advance

Check out:
http://www.lc.leidenuniv.nl/awcourse/oracle/rac.920/a96600/mancrea.htm

ORA-00313: open failed for members of log group 4 of thread 2

Hi.
i have found the below error in one of RAC instance.Could you please advise on this since i am new to RAC env
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '+NEWDISK_GROUP/DEMO/onlinelog/group_4.1453.1029312423'
ORA-17503: ksfdopn:2 Failed to open file +NEWDISK_GROUP/DEMO/onlinelog/group_4.1453.1029312423
ORA-15032: not all alterations performed
ORA-29702: error occurred in Cluster Group Service operation
ORA-29702: error occurred in Cluster Group Service operation
Thanks
Sai

any update on this?

ORA-00313: open failed for members of log group 1 of thread 1

Hi
I'm restoring a database on a different host. I have the backups, from which I want to restore the database. I made the corresponding changes in the initSID.ora file and started the script to do the restore.These are the steps I followed:
connect target=/
run{
startup nomount;
allocate channel c1 type disk;
allocate channel c2 type disk;
allocate channel c3 type disk;
allocate channel c4 type disk;
restore controlfile from '/tmp_backups/rman/lev0_open_cf_SID_2826_1';
alter database mount;
set newname for all datafiles
restore database;
set until logseq = 29317 thread = 1;
switch datafile all;
recover database;
alter database open resetlogs;
One mistake I made here is that logseq should have been last seq+1, which I did not do. I have it as last seq.
Restore of datafiles and switching of datafiles was fine. But I get error for redo log files.
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u13/oradata/SID/redo02a.log'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Why is it looking for at the old path yet?
I'm not sure what I missed and how to proceed. Please help.
Thanks,
Mamata

I do believe that set newname for all datafiles only means actual datafiles and no redo logs. So with open resetlogs, Oracle tries to create new redo logfiles where the backup controlfiles says they are.
As with creating a auxilliary database in another filesystem, we use DB_NAME_FILE_CONVERT and LOG_FILE_NAME_CONVERT.
I am not sure if it is possible to type "set newname for all datafiles" and expect also the redo logfiles to change location.
You might try to set these two parameters and see if it works.
good luck.
rgds
Kjell Ove

ORA-00313: open failed for members of log group 3 of thread 1

Whenever I try to login as a user I get the following:
sqlplus user/user
SQL*Plus: Release 10.2.0.2.0 - Production on Fri Nov 9 10:43:39 2007
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
So It occurs to me to login as sysdba and restart the DB …
SQL> connect sys/manager as sysdba
Connected.
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 536870912 bytes
Fixed Size 1281264 bytes
Variable Size 150995728 bytes
Database Buffers 377487360 bytes
Redo Buffers 7106560 bytes
Database mounted.
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/u06/oradata/RKDB/redo03.log'
ORA-27037: unable to obtain file status
Intel SVR4 UNIX Error: 2: No such file or directory
Additional information: 3
SQL> quit
I now realized what happened and how this happened. During a clean-up effort this file was accidentally deleted and unfortunately we don’t have any backups.
I am willing to lose the data. Is there something I can do so that the startup does not try to open this file ?
All I am able to do now is to mount the database but not open it.
Thanks in advance,
Daniel

this is what I get now ...
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
SQL> Recover database until cancel;
ORA-00279: change 608619 generated at 11/09/2007 10:00:41 needed for thread 1
ORA-00289: suggestion : /u05/oradata/RKDB/arch/log1_33_633207859.arc
ORA-00280: change 608619 for thread 1 is in sequence #33
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log
'/u05/oradata/RKDB/arch/log1_33_633207859.arc'
ORA-27037: unable to obtain file status
Intel SVR4 UNIX Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
SQL>

Max Date function by Group is not catching a Null Date

I have a query that returns the MAX CLINICALDATE. It is worknig great except if their is no CLINCIALDATE then it doesn't bring that group back and it needs to. Thank you for your help.
SELECT PERSON.MEDRECNO, MEDICATE.INSTRUCTIONS, PERSON.LASTNAME, PERSON.FIRSTNAME, MEDICATE.STARTDATE, MEDICATE.STOPDATE, MEDICATE.STOPREASON, MEDICATE.DESCRIPTION, PRESCRIB.REFILLS, PRESCRIB.QUANTITY, PRESCRIB.CLINICALDATE
FROM
     ((ML.MEDICATE MEDICATE
INNER JOIN ML.PERSON PERSON ON (MEDICATE.PID = PERSON.PID))
     LEFT OUTER JOIN ML.PRESCRIB PRESCRIB ON (MEDICATE.PID = PRESCRIB.PID)     AND (MEDICATE.MID = PRESCRIB.MID))
     LEFT OUTER JOIN ML.USRINFO USRINFO ON (PRESCRIB.PVID = USRINFO.PVID)
WHERE PERSON.MEDRECNO='20-14-38' AND (MID, CLINICALDATE) IN
(SELECT MID, MAX(CLINICALDATE) FROM PRESCRIB GROUP BY MID) and (STOPREASON is null or STOPREASON = ' ') and (MEDICATE.STOPDATE = to_date('4700-12-31 00:00:00', 'yyyy/mm/dd hh24:mi:ss'))
ORDER BY MEDICATE.DESCRIPTION

As stated when entering the forum, SQL Developer is a tool; you want the SQL And PL/SQL forum instead.
Regards,
K.

Lsgrp - list all members of a group

lsgrp is a small and fast utility written in C that does just one thing: it lists the members of a group. It can be used in scripts that need to do something for each user in a group, such as setting up directories or generating per-user configuration files. There is a section on the project page explaining why a new utility was necessary.

I agree, addressing a new message to a group using Address through the Mail program seems to fill in just the first recipient's name.
A work around is to start your new message, click on Address and select the group you wish to send the message to. Take the extra step to highlight the first person in the group and then command-A to select all. When you then click on the To: button all of the recipient's will be in the address line of your mail message.
Alternately, start your new message and then type the name of the group in the To: line (don't use the Address button at all). You don't have to get all of the name typed in before the group name is identified. When the group name has been properly identified just hit the Return key and all of the group members will be filled in the To: line. This should do what you are hoping for.
Dale

Querying for the members of a group using the PRC

I've been combing through the PRC API for a way to query for the members of a group (not the ACL, but the member users and groups).
I can't find anything that seems to do this for Plumtree 5.0x using the PRC. Am I missing something or is this just not implemented? Seems like a major oversight to me. If any Plumtreevians are listening, can I add a feature request for those methods in your next release of the WS Server?
Thanks!
Chris Bucchere | bdg | [email protected] | http://www.bdg-online.com
Like blogs? Check out http://bdg-plumtree.blogspot.com

If you go into the Calendar section and select the Edit option for that calendar and then change the permissions for that calendar people should be able to subscribe to it.

Make members of a group local administrators

I have a 10.5.2 server and mixed 10.4.x and 10.5.x clients. Is there a way to setup users with Workgroup Manager such that members of certain groups are seen by the clients as local administrators?

Hi Nige-B,
Failover Cluster Manager requires Full Control, so there is no way to delegate the read-only users. However we can have read-only privileges for PowerShell management. We can
use the following command:
1.
Open the PowerShell command with administrator privilege.
Import-module failoverclusters
Grant-ClusterAccess domain\user1 –readonly
NOTE: You can type "-Cluster clustername" to grant access to another cluster.
3. Then the user domain\user1 has the read-only privilege to see the current status of the cluster, or can see the parameters.
For more information of this cmdlet, please refer to:
Grant-ClusterAccess
http://technet.microsoft.com/en-us/library/ee460969(WS.10).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ORA-00313: open failed for members of log group

Hi,
on 11g R2, on standby I have this in alertlog :
ORA-00313: open failed for members of log group 21 of thread 1
Deleted Oracle managed file +DGRECO_FSCM/xxx/onlinelog/group_21.1721.791875667
Tue Aug 21 14:37:34 2012
Clearing online redo logfile 21 complete
Errors in file /data01/oracle/diag/rdbms/xxx_mrp0_22843.trcAnd this in trace file
*** 2012-08-21 14:35:57.192 4265 krsh.c
*** 2012-08-21 14:37:26.406 4265 krsh.c
Clearing online redo logfile 21 +DGRECO_FSCM/xxxx/onlinelog/group_21.1721.791875667
DDE: Problem Key 'ORA 313' was flood controlled (0x5) (no incident)
ORA-00313: open failed for members of log group 21 of thread 1Any explanation please ?
Thank you.

Refer to the below note:
ORA-19527 reported in Standby Database when starting Managed Recovery [ID 352879.1]

Max. members of a group??

Similar Messages

Maybe you are looking for