Max memory
I have an HP Pavilion dv7 1273cl laptop. I would like to upgrade the memory. The software it came with was Windows Vista but I have since upgraded that to Windows 8.1. I have read that memory upgrade depends on the installed Windows software (Xp, vista, 7 etc) and your motherboard. I do not know the type of motherboard but my original software allowed me an 8gb max. Now that I have upgraded the software can I now go beyond that or am I still chained to 8gb. Also what type of memory is it?
Thanking you in advance,
MF
This question was solved.
View Solution.
Hi,
An example of a suitable upgrade ( 2 x 4Gb Modules ) can be seen on the following link.
http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=C00CAD4DA5CA7304
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
MS 6147 max memory and disk sizes
For the MS 6147 can anybody confirm the max Hard disk size and max memory.
It will not recognise the 40Gb HD I am trying to fit, and only recognises half of the 256Mb memeory simm I have fitted.
The BIOS version is 1.9 but I think that is a 'special' by Packard Bell. The MSI BIOS download site makes no mention of disk problems rectified right up to V1.8 which is the latest, with the exception of one for the ZX chipset only which addresses EDMA 66 problem.
Anybody got a definitive answer on this?Supports a maximum memory size of 256MB (8M x 8) or
512MB (16M x 4) registered DIMM only
how many chips on dimm is what counts with older boards
go to drive makers web site get jumper settings to limit it to 32gb and try -
What is the max memory a 2nd Gen iMac (2008) can run and where can I buy it?
What is the max memory a 2nd Gen iMac (2008) can support and if it is more than 2GB, where can you purchase?
Go to Crucial.com or OWC, you will get good advice and good memory suitable for Macs.
http://www.crucial.com/uk/index.aspx?gclid=CJyMwKGJuL0CFWfLtAodGXEAMQ&cm_mmc=goo gle-_-uk-_-brand-_-null&ef_id=UzbobwAAAS7VFVy@:20140329153615:s. Note UK site.
http://eshop.macsales.com/?utm_source=google&utm_medium=cpc&utm_campaign=adwords &gclid=CNLf77iJuL0CFTCWtAodiFUAVA -
My computer has a max memory of 8 what can i do to increase this
Is there anything that I can do to increas the max memory on my computer? I show the max on the s5-1204 is 8G. CanI get a new processor? what is the possible solution if any
This question was solved.
View Solution.MCSH, welcome to the forum.
If you have 8 GB of memory installed there is nothing else that you can do. However, here are the processor upgrades for the computer:
Socket type: LGA 1155
TDP: 35W up to 95W (processor dependent)
Motherboard supports the following processor upgrades:
Core i3-2xxx/T dual core
Core i3-2xxx dual core
Core i5-2xxx quad core
Core i7-2xxx quad core
Core G5xx/T dual core
Core G6xx/T dual core
The quad core processors would be faster than the one that came with the computer.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
How to Determine Safe Max Memory Limit?
From what I understand, the amount of memory available to your AIR game on a device will vary depending on how many other apps the user is running, the type of device, etc.
So with this in mind, how does one define a safe max memory limit for a given device? What percentage of a device's total RAM can we assume we have access to?
Here are the iOS RAM Specs
iPod (4th Gen): 128Mb.
iPad 1: 256 MB
iPad 2, iPod Touch (5th Gen): 512 MB
iPad3: 1 GB
I already have highly optimized texture atlases using PVRTC ATF for best use of memory, but if you've ever worked with a passionate creative department, you'll know they always want more. I need to be able to tell them exactly how many spritesheets they have to work with for a given device - how would I do this?
NOTE: iPhones/iPod Touches/iPads all have a Unified Memory Architecture which mean that both the CPU and GPU share system memory, which means there is no dedicated GPU GRAM on these devices. So the RAM listed above, I assume, is shared by both the game logic and the GPU.Update, I've found an Objective C post on Stack Overflow that answers this question
Here are the (rough) max memory limits to expect before an out-of-memory crash will occur:
iPad1: 127MB/256MB (crash amount/total amount)
iPad2: 275MB/512MB
iPad3: 645MB/1024MB
iPhone4: 325MB/512MB
Note that max memory limit will vary depending on how many apps a user is running, but these figures are a good rough guide. See the Stack Overflow post for more details. -
Expanding the virtual machine max memory in osx
i just upgraded the memory on my power mac because this java program im using requires alot of memory on the heap. i remember on windows, there is a property file u can tweak to increase the max memory used by the virtual machine, im just wondering if you can do the same with osx (10.2)
Yes - it's in Applications/Utilities and it's called Terminal. Default shell is tcsh but you can download bash and configure it to use that - there are probably other shells out there too.
-
Hi i have one problem i canot understand why compay HP block support max memory for notebook. Configuration write max 8GB but hardware support 16GB. Chipset support 16GB processors support 16GB and mother board support 16GB. But BIOS BLOCK max memory only 8GB. I test i put 1 DDR3 8GB windows working and can looking if i put 1 8GB and 4GB total 12Gb only worki 8GB. I start find and study this problem to much view forum and understand this lock in BIOS support max memory. After i write insyde and get answer " Insyde Software sells BIOS source code to PC manufacturers who modify the source code to meet their specific BIOS needs. Thus, each PC manufacturer has a unique BIOS. Insyde does not track the changes made to the BIOS by the PC manufacturer because the PC manufacturer has full control over the BIOS features. Your laptop is limited to 8GB because either: 1) HP configured it that way and will not allow additional memory or 2) the processor is limited to work with 8GB. Insyde has no control over the amount of memory allocated." I ask and want HP help me. I want use my notebook 100% and not have limit use my notebook. I think this do this bad For the buyer. Thanks i think you help.
That is the theoretical configuration of the chipsets. I think you already know that HP has designed the unit (a g6-2003sr) to take no more than an i5-2450M processor and no more than 8 gigs of DDR3-1600. Sometimes the specs on these are conservative and it will in fact take more memory, but that would be an expensive experiment. There is no way it is going to take a 3rd gen i7 Quad Core, though. What is it exactly you want done here? You think that if HP would just write new BIOS you could install these parts you want to install? I don't think it is not that simple although even a new BIOS is not going to happen. I did go back and search the internet and there are posts on the Dell and Asus forums with exactly the same complaints....HM76 chipset 2d gen Intel Core laptops maxxing at 8 gigs when it "could be" 16 gigs. So in the industry this was a common design in 2012.
-
Max Memory Settings Not Working (SQL Server 2008 R2)
I have 12 GB ram in sql server 2008 R2 of 64 bit server (Windows 2008 R2).
I have set the Max memory setting to 12288 MB Memory setting.
Still the usage of sql server process is around 14 GB.
Is Max memory setting not working?
I have also enabled AWE after all it is 64 bit.
ThanksProblem is that: my OS is halting due to this RAM. I have 16 GB of ram and assigning 12 GB to SQL SERVER and rest is using for OS. Please guide me how to get information about actual memory usage from all sql server processes. like
all CLR etc
Hi,
Are you also running SSIS/SSAS/SSRS with database engine services. What do you mean by OS is halting ?
If you want to check whether SQL Server is facing memory crunch please have a look at perfmon counters from
this link
Sys.dm_OS_memory_clerks would be DMV helpful in tracking memory utilized by various processes
I have also enabled AWE after all it is 64 bit. Thanks
Please note AWE doe snot have any notable affect in 64 bit system.
Below will tell you memory used by SQLCLR
select single_pages_kb + multi_pages_kb + virtual_memory_committed_kb from sys.dm_os_memory_clerks where type = 'MEMORYCLERK_SQLCLR'
Below query will give you memory consumed by various clerk
SELECT type, SUM(multi_pages_kb)
FROM sys.dm_os_memory_clerks
WHERE multi_pages_kb <> 0
GROUP BY type
ORDER BY SUM(multi_pages_kb) DESC
Can you reduce max server memory to 11 G and see if it gives some relief
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
How to set JVM max memory setting in JBoss?
We have an old deployment of LiveCycle 7.2 running on Windows 2003 / JBoss. The max memory is reported as 508mb on the JBoss Management Console. Anyone have any idea how to change this value. I tried modifying the jvm.cfg file as well as run.conf in JBoss and modify JAVA_OPTS but it didn't seem to make a difference.
Seems its in the Windows registry at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\JBoss for Adobe LiveCycle\Parameters -
SQL Server Max Memory Settings
Hi,
I'd like to check if SQL Server will consume memory more than the configured MAX Memory settings? And if so when does SQL consume that and how much would it consume.
Regards,
JayHi,
I'd like to check if SQL Server will consume memory more than the configured MAX Memory settings? And if so when does SQL consume that and how much would it consume.
Hi
Can you please tell us what is version and edition of SQL Server here. If it is 2012 its little difficult to reporduce your scenario where SQL Server 2012 will take more than max server memory setting because lots of features which use to take memory
outside buffer pool before SQL 2012 are now changed to take memory from buffer pool. Also quite lot depends on whether system is 32 bit or 64 bit
For SQL Server versions below 2012(not SS2000) you might get lucky with following (taken from
Here)
1. COM Objects
2. SQL Server CLR
3. Memory allocated by Linked Server OLEDB Providers and third party DLL’s loaded in SQL Server process
4. Extended Stored Procedures:
5. Network Packets
6. Memory consumed by memory managers. If the memory request is greater than 8 KB and needs contiguous allocation.
7. Backup
If you heavily use above features you might see SQL Server memory utilization crossing above max server memory setting. Of all above SQLCLR and extended stored procs would be my bet. If you use them heavily you might see what you want to. Extended
stored proc has performance issues so use it on your own risk. Use below query to check SQL server memory utilization( works from SS 2008 and above)
select
(physical_memory_in_use_kb/1024)Memory_usedby_Sqlserver_MB,
(locked_page_allocations_kb/1024 )Locked_pages_used_Sqlserver_MB,
(total_virtual_address_space_kb/1024 )Total_VAS_in_MB,
process_physical_memory_low,
process_virtual_memory_low
from sys. dm_os_process_memory
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
How can max memory be undefined ?
Im trying to monitor memory usage of my app. The memoryUsage class says that max memory can be undefined (see http://java.sun.com/j2se/1.5.0/docs/api/java/lang/management/MemoryUsage.htm), how can this be, isnt it always
-XMx (or 64MB) if not defined.paultaylor wrote:
tschodt wrote:
You are thinking of a specific implementation of Java (the Sun implementation).Are then any implementations that actually use the physical memory availble as required ?The beautiful things is that it doesn't matter if there are actually any implementations that behave differently. The standard clearly defines what such a implementation should do and therefore it is legal. If you want to write code that works on all implementations you should probably handle that case as well.
Personally I use only the Sun JDK, the IBM JDK and the OpenJDK (IcedTea) and those three have a maximum at all time, as far as I know. But there are other implementations out there where I wouldn't be so sure. -
I want to know the max memory of my t500 thanks. Dose it support 8G memory?
I got one T500 (CTO2242 L3A3865 08/09) one years ago.
I want to know the max memory of my t500 thanks. Dose it support 8G memory(once I install win7 64bit)?
I diy T500 on the lenovo net shop today, I find that I can choice 8G memory, so I want to know if my t500 support 8G memory with win7 64bit ?
thanks alot!!
Solved!
Go to Solution.ernest100 wrote:
thanks alot, are there any Definite answer?
The T500 (2242CTO) has 2 memory slots and it will support 8GB of memory in a 2 X 4GB configuration. -
To find out the min and max memory been used by each parameter under SGA_MA
Hi,
Can any please tell me how to find out the min and max memory been used by each parameter under SGA_MAX and SGA_TARGET ? below is the db CRMS65T. If any such script is there please provide me
SQL> select name from v$database;
NAME
CRMS65T
SQL> show parameter sga
NAME TYPE VALUE
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 1000M
sga_target big integer 1000MThanks in advanceCan any please tell me how to find out the min and max memory been used by each parameter under SGA_MAX and SGA_TARGET ? below is the db CRMS65T. If any such script is there please provide meI guess your question is, each memory components of SGA? if so
SQL> select * from v$sgainfo;
NAME BYTES RES
Fixed SGA Size 2088504 No
Redo Buffers 18882560 No
Buffer Cache Size 616562688 Yes
Shared Pool Size 301989888 Yes
Large Pool Size 4194304 Yes
Java Pool Size 4194304 Yes
Streams Pool Size 0 Yes
Granule Size 4194304 No
Maximum SGA Size 947912704 No
Startup overhead in Shared Pool 125829120 No
Free SGA Memory Available 0Also check
SQL> select COMPONENT,CURRENT_SIZE,MIN_SIZE,MAX_SIZE,USER_SPECIFIED_SIZE from v$sga_dynamic_components;
shared pool 301989888 301989888 0 209715200
large pool 4194304 4194304 0 4194304
java pool 4194304 4194304 0 4194304
streams pool 0 0 0 0
DEFAULT buffer cache 616562688 616562688 0 603979776
KEEP buffer cache 0 0 0 0
RECYCLE buffer cache 0 0 0 0
DEFAULT 2K buffer cache 0 0 0 0
DEFAULT 4K buffer cache 0 0 0 0
DEFAULT 8K buffer cache 0 0 0 0
DEFAULT 16K buffer cache 0 0 0 0
DEFAULT 32K buffer cache 0 0 0 0
ASM Buffer Cache 0 0 0 603979776
13 rows selected.
SQL>Edited by: CKPT on Sep 19, 2011 8:55 AM -
VM Hangs Following Change To Max memory
Hi,
Hoping someone can shed some light on this issue. I'm running OEL 5u5 x64 ( installed using OVM ) on Oracle VM 2.2. I've installed the OS with no bother. I've then powered off the VM, and increased the Max Memory setting. The VM will now no longer boot past the image loader.
Returning the Max Memory setting to it's original value, fixes everything. I've tested this on existing, and new VM's.
Any ideas?
Thanks
JohnOK, fixed this issue. Found a solution in the release notes for Oracle VM Server 2.2.1 ( section 6.24 ).
However, does anyone know how to make changes to the vm's config file via OVM? -
[P965 NEO] Why max memory 8gb but don't support 2gb module?
Why max memory supported is 8gb and has 4 slots, but don't support 2gb DDR2 800mhz module?
The memory is CORSAIR PC2-6400 XMS2 DHX DUAL CHANNEL 2GB.
Sorry with my English.
Main Board
RAMQuote
Why max memory supported is 8gb and has 4 slots, but don't support 2gb DDR2 800mhz module?
This is an (Intel!) chipset (memory controller) limitation rather than a board or BIOS problem. Intel states it somewhat differently:
http://www.intel.com/Assets/PDF/datasheet/313053.pdf
Quote
Supports 256-Mb, 512-Mb, and 1-Gb technologies for x8 and x16 devices (DDR2
800MHz 1Gb technology not supported)
Intel refers to the density rather than the memory capacity/size. Look at this Kingston module model for example:
http://www.valueram.com/datasheets/KVR800D2N5_2G.pdf
Quote
The components on this module include
sixteen 128M x 8-bit DDR2-800 SDRAM in FBGA packages
"128M x 8-bit" refers to the density of the memory chips used on those modules (=1024 Mbit or 1Gbit (1Gb)). There are sixteen of those 128M x 8-bit chips on the module which gives you a capacity of precisely 1024Mbit x 16 = 16384 Mbit (2024 MByte).
A 2GB DDR2-800 module that meets the Intel specifications for the P965 memory controller (512Mbit maximum density for DDR2 800) would need to have 64M x 8-bit components but would need precisely 32 of those chips to reach a capacity of 2GByte. Try to find a DDR2-800 module that can hold 32 memory chips and you will be able to run them @DDR2-800. To my knowledge such modules do not exits (the module I used as an example has 8 chips on each side).
That is where the limitation comes from (it is not an MSI thing). -
Hello,
I own a Macbook Pro 15" (late 2011) and I would like to upgrade the memory. I want to go with two 8gb sticks but if the motherboard only supports 8gb then I will have to stick with 8gb. Also, the ram that I have in currently, which is the 4gb that came with the mac, is 1333 Mz. Would I be able to upgrade to 1600 Mz on this laptop?Max is 16 GBs. Do not attempt to use memory with specs that differ from those required by your hardware.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
Maybe you are looking for
-
Online rotate a xy graph around the zero point
Hi, I want to plot the path of my robot by instaling a bluetooth mouse on it, so when the robot moves, the mouse cursor changes and I can plot the path in labview. My problem is that while rotating the robot, mouse is rotate too but the cursor is sti
-
Re:OleDbConnection in Crystal Report
Hi All, I have designed crystal report i have used report viewer for viewing the crystal report. In my coding part in connection with the oledb i have used the following code:- oCONNECTION_STRING = "Provider=SQLOLEDB;Server=" & oCompany.Server & ";Da
-
Wifi: No Hardware Installed after 10.7.3 update?
I've got a MBP 3,1 which I just updated to 10.7.3 through Software Update with the hopes that the wifi updates would fix my waking from sleep issues. However, upon restarting when I click on the wifi icon it shows in grey text "Wi-Fi No hardware inst
-
How to join T510 Thin Client to Domain
I need to join my Hp T510 thin client devices to my Windows domain. (I need to place them all in a certain OU in Active Directory). Is this even possible? I have been reading around about this, and I get the feeling that some people have managed to d
-
IChat msn .mac newbie question
hey people sorry if this has been asked before... Can i talk with my msn friends if i sign up to ichat (how do i sign up?) do i need a .mac account to use ichat and is .mac good? thanks