MAX - Message from Webpage

Greetings Everyone,
Sorry if this has been posted in the incorrect forum.
When I am using MAX and select the Calibration Tab for the PXI-5114 or PXI-4065 a dialogue box "Message from Webpage" appears as displayed in the attached picture. I've installed Labview and TestStand on two (2) other stations and haven't encountered this issue. Other than re-installing the entire software package as the message states, is there a way to resolve this issue easily? Thank you in advance for any comments that you may provide.
Regards,
Scott
Attachments:
MAX_MessageFromWebpage3.JPG ‏52 KB

Hi Joshua,
The funny thing is that starting MAX and then clicking through the tree and clicking on "4:NI PXI-4065 "PXI1Slot4", the Show Help in the upper right corner is un-ghosted. Once you click on the "Calibration" Tab, then the message from webpage appears.
Since you mentioned the Help in the far right, I clicked on that before clicking the Calibration Tab and I get the same message. The funny part is the Help file appears. I guess if the Helpasst.dll can't be found is not hurting the performance of the software then I guess I won't worry about it unless some else out there thinks otherwise. Thank you for your comment.
Regards,
Scott

Similar Messages

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Vba to dismiss an IE8 or IE9 "message from webpage" popup window

In excel or word, paste the following code into a vba normal module and run it. The code goes to a public web site and tries to lookup a school. The website pops up a "message from webpage" dialog that warns me that the the school
number is not valid.
My program can detect that popup, but how can I reliably and automatically dismiss it?
I have a workaround that uses sendkeys but about 10% of the time the popup remains.
Does anybody have a solution that does NOT require sendkeys? The ideal solution would also work when objie.visible = false.
option Explicit
Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Sub t1022()
Dim objie As Object
Dim i As Long
Dim htmlTable As htmlTable ' set reference to microsoft html object library
Set objie = CreateObject("InternetExplorer.Application")
objie.Visible = True
objie.navigate "http://www.slforms.universalservice.org/Form471Expert/471StatusCheck.aspx"
Do: Sleep 100: Loop While objie.busy
Set htmlTable = objie.Document.getElementsByName("txtBenId")(0)
htmlTable.Value = 12345
With objie.Document.getElementById("txtFundingYear")
.Click
.Value = 2013
End With
objie.Document.getElementById("btnSearch").Click
For i = 1 To 10
Sleep 100
If Not objie.busy Then Exit For
Next i
If objie.busy Then
MsgBox "popup detected"
End If
End Sub

Hi,
If there is a will, there is definitely as way. The following definitely works!
Copy and paste the following code in a module.
Option Explicit
Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
'Sends the specified message to a window or windows. The SendMessage function calls the window procedure
'for the specified window and does not return until the window procedure has processed the message.
Public Declare Function SendMessage Lib "user32" Alias "SendMessageA" _
(ByVal hWND As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long
'Retrieves a handle to the top-level window whose class name and window name match the specified strings.
'This function does not search child windows. This function does not perform a case-sensitive search.
Public Declare Function FindWindow Lib "user32" Alias "FindWindowA" _
(ByVal lpClassName As String, ByVal lpWindowName As String) As Long
'Retrieves a handle to a window whose class name and window name match the specified strings.
'The function searches child windows, beginning with the one following the specified child window.
'This function does not perform a case-sensitive search.
Public Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, _
ByVal lpsz2 As String) As Long
Public Const BM_CLICK = &HF5&
Sub t1022()
Dim objie As Object
Dim i As Long, hWND As Long, childHWND As Long
Dim htmlTable As htmlTable ' set reference to microsoft html object library
Set objie = CreateObject("InternetExplorer.Application")
objie.Visible = True
objie.navigate "http://www.slforms.universalservice.org/Form471Expert/471StatusCheck.aspx"
Do: Sleep 100: Loop While objie.busy
Set htmlTable = objie.Document.getElementsByName("txtBenId")(0)
htmlTable.Value = 12345
With objie.Document.getElementById("txtFundingYear")
.Click
.Value = 2013
End With
objie.Document.getElementById("btnSearch").Click
For i = 1 To 10
Sleep 100
If Not objie.busy Then Exit For
Next i
If objie.busy Then
'MsgBox "popup detected"
DoEvents
hWND = FindWindow(vbNullString, "Message from webpage")
If hWND <> 0 Then childHWND = FindWindowEx(hWND, ByVal 0&, "Button", "OK")
If childHWND <> 0 Then SendMessage childHWND, BM_CLICK, 0, 0
End If

Need help with an automating a "Message from webpage" click.

Any help would be appreciated. I guess I would consider myself as a beginner with VB.NET.
Basically - My program launches an internet explorer window. Points to a specific webpage that has records. Finds the "check all" and clicks it, then finds and clicks "delete".
I am stuck at this part. A "Message from webpage" pops up wanting to confirm the deletion of the records. I have 50 records per page and an excess of 14,000 records each day that need to be deleted. I do not have time to click OK on every single
page.
I have tried to sendkey function, which worked for a while but for some odd reason, it quit working. Someone suggested using API, which I know nothing about. Please help me! I am desperate!
Here is my code. I know the "threading.thread.sleep" isn't good to use but I need someway to pause. Like i said, I am a beginner, so please be easy!
Public Class Form1
Dim oInputs As Object
Dim oWShell As Object
Private Sub btndel_Click(sender As Object, e As EventArgs) Handles btndel.Click
With CreateObject("InternetExplorer.Application")
.visible = True
.navigate("WEDPAGE GOES HERE!")
Threading.Thread.Sleep(3000)
oInputs = .document.getElementsbytagname("a")
For Each elm In oInputs
If InStr(elm.innertext, "(Un)Check All") > 0 Then
elm.click()
Exit For
End If
Next
For Each elm In oInputs
If InStr(elm.innertext, "Delete") > 0 Then
elm.click()
Exit For
End If
Next
Do While .busy Or .readystate <> 4
Threading.Thread.Sleep(2000)
Loop
End With
Dim objShell = CreateObject("WScript.Shell")
Dim Success = objShell.AppActivate("Message from webpage")
Do Until Success = True
Threading.Thread.Sleep(1000)
Success = objShell.AppActivate("Message from webpage")
Loop
Application.DoEvents()
AppActivate("Message from webpage")
SendKeys.Send("{ENTER}")
End Sub

Hi msnyder1112,
Thank you for posting in MSDN forum.
Since this issue is related to the VB.NET, so we will move this case to VB forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Has anyone seen the following on their WP? Message from webpage WARNING: Time Warner Cable Customer – Your Internet Explorer browser and computer may be compromised by security threats. Call 844-600-6224 now for IMMEDIATE assistance. OK

Has anyone seen the following on their WP?
Message from webpage
WARNING: Time Warner Cable Customer –
Your Internet Explorer browser and
computer may be compromised by
security threats. Call 844-600-6224 now for
IMMEDIATE assistance.
OK

This sounds like a virus or malware program that has made its way onto your computer. I would ensure you have the latest virus definitions on your computer and run a thorough (complete) scan of your system. If this doesn't work, I would suggest you use Microsoft's Malware Removal Tool. You can download it at the link below. Hope this helps.
http://www.microsoft.com/security/pc-security/malware-removal.aspx

Message from webpage no object then my computer freezes

i have HP Media Center PCm7334n desck top computer windows xp when i get on internet a message box apears . in it says message from webpages object error. then my comp. freezes. any suggestions

Hi,
Since how long have you been facing this issue?
Were there any changes or updates made on your computer?
What is the complete and exact error message?
Try this method.
Use the Internet Explorer (No Add-ons) mode
To do this, click Start, point to All Programs, point to Accessories, point to System Tools, and then click Internet Explorer (No Add-ons).
If this resolves the issue, follow these steps to isolate the browser add-on that is causing the issue:
1.    Click Tools, and then click Internet Options.
2.    Click the Programs tab, and then click Manage add-ons.
3.    Click an add-on in the Name list, and then click Disable.
4.    Repeat step 3 until you identify the add-on that is causing the issue.
Let me know if this resolves the issue.
THX

TimeSheet - Message from webpage __error Loading

Hi,
In Project Server 2013 we notice that for some users tasks (from some projects) cannot be added to the TimeSheet. After the user selects the specific task the browser displays the message:
Message from webpage
__Error Loading
The log files don't seem to mention anything and turning on the compatibility view mode for this web address doesn't solve this issue either.
Hope somebody can help us out.
Rgds, Frank
Frank Jutte Winvision (http://www.winvision.nl) Project Manager / EPM Consultant

Hi Frank,
It can be due to many reasons. Which IE version are those users working with?
First check for those users' permissions
Check that the users' projects and/or assignments has not been delete in the project
Try to delete the timesheet (or recall if submitted)
Try to delete in Project Pro assignments and tasks and create them again
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Message from webpage

Keep getting an error after logging into a web site.
"Message from webpage". " ! the following error occurred:error" There is an "OK" response box.
The page freezes and none of the options function.
This error occurs on a laptop running Windows 7 with Internet Explorer 11. [Version 11.0.9600.17501] [Update 11.0.15 (KB3008923)]
This error does not occur on a laptop running Windows 8.
Why?

Hi,
Did this issue for all websites or specific one?
Please follow these methods to troubleshoot:
1. Install the latest updates
2. Run the Internet Explorer Performance troubleshooter
3. Turn off hardware acceleration
4. Turn off add-ons
5. Reset Internet Explorer settings
The detailed steps, refer to this guide(Internet Explorer crashes, freezes, or hangs):
What to do when Internet Explorer isn't working
http://windows.microsoft.com/en-in/internet-explorer/ie-crashes-stops-working#ie=ie-11
Karen Hu
TechNet Community Support

Many sites have error message "message from webpage" {object error} which freezes system and cont/alt/del is only solution..HELP?

Primarily happens when I am researching on the web, happens with IE and Google. Makes no difference if site is secure (s) or not. Running windows 7 home edition on a samsung laptop and have cleaned with Advanced SystemCare 6. Have also used Smart Defrag 2. Could it be my internet connection?

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Startup dialog "Message from webpage" and "hello"??

hello

Hi, greenhillzone, and welcome to the Community, Please post back with more information and detail about your question! Thanks in advance,Elaine

HT1689 i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

It sounds like it still has her information on it, so it might be efficient to navigate to Settings, then General, then Reset, then Erase All Content and Settings. You can then set up the phone again, using your information. This way the phone will be yours, officially, and her data and information will be removed.

HT4864 getting error when sending test message - error # 0x80004005 - both icloud accounts. Using settings from webpage

I am receiving error message in outlook when I attempt to send test message from either of my icloud account addresses - error is 0x80004005. I have setup these accounts using the settings in the instructions to manually setup an email account in Outlook. Resolution?

Change your outgoing SMTP server for you @me accout to: p06-smtp.mail.me.com

Mail not getting all messages from server and other strange behavior

Hello All,
Mail has been doing some odd things for me of late (at least the last week) and I'm lost for a solution to my problem. As far as I can tell, perhaps my Prefs. have become corrupted, or at least something in relation to Mail has become corrupted. Perhaps someone has a solution to this issue before I have to back it all up and NUKE the whole **** app to get back up and running properly.
The main issue I appear to be having is that Mail is not getting all of my Mail messages from my server. I can log into my web-mail interface provided by my domain host and can see there that there are many e-mails that don't appear to be coming down the pipe to the Mail.app client. I'm getting some e-mail's but not all....
*Here are all the things that I've checked:*
• The missing e-mails are not being picked up as Junk and are not in the Junk folder
• I have done a search within Mail for the missing e-mail's and nothing turns up anywhere.
• I have checked on the server end that I'm not maxing out my InBox or that there are any other service issues from my domain host provider.
• I have been into Prefs and checked my account settings - most (see below) of which appear to be as normal and are fine.
*Here are the weird things that I've noticed:*
• When I went into the Prefs. for the account in question, I noticed that my login had changed. For example - it usually it is "[email protected]", however it had seemed to have changed to just "johndoe" - I know this wasn't me as my domain host will not allow me to access any mail unless the login is the full mail address.
• In RULES, every rule I double click to check on seems mostly fine, apart from the fact that every "Account is:" the pull down menu just appears as blank. Usually it says "Account is: ([email protected])"
It's there last 2 items that make me think something is corrupted - so I guess my question is, what pref or file has corrupted and how can I fix it without having to give Mail.app a digital enema?
Any assistance would be most helpful - missing some but not all your incoming e-mail messages is quite annoying, as you can guess...!
Thanks,
Boz

Hello Boz.
This appears to be a rules issue. Mail is almost certainly downloading those messages, but they’re probably being processed by your rules in an unexpected way — given the information you’ve provided, maybe because there is something wrong with the file where the account settings are stored.
Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/InputManagers/
~/Library/Mail/Bundles/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
<hr>
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Write down your Mail > Preferences > Accounts settings or take screen shots of them.
2. If you have a .Mac account and .Mac synchronization of Mail data is enabled either in Mail > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
3. Quit Mail.
4. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to solve the problem. You can do this in the Finder by dragging the Mail folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is locally stored.
5. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop (to be deleted if this solves the problem). If you have a backup of your data that includes a working copy of this file, you may try restoring it from the backup to avoid steps 6-8.
6. Open Mail. You’ll have to set up your non-.Mac accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done.
7. You’ll have to re-configure some of your Mail > Preferences settings. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
8. As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
9. If the problem is fixed now and .Mac synchronization of Mail data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Mail data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
<hr>
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Is there a way to control the number of consumed messages from JMS?

Hi everyone,
I have a BPEL process that is consumes messages from a foreign queue, performs a transformation, and passes it to Oracle Apps. I'm curious if there is a way to control the number of messages consumed at a time for processing.
For example, if we place 50 transactions on this queue, I would like to only consume 10. And then as each one is processed and passed to Oracle Apps, I would like to pull another transaction off the queue. So basically I would only be processing 10 at the most.
The issue I am having is we put 50 on the queue and the 50 are take off right away. But then half are making it into Oracle Apps and the remainder is failing with a JCA Connection Factory max connection error.
Instead of changing the settings to get more through, I am wondering if it's possible to limit the number being processes at any one time.
Thanks

Hi,
Have a look at the adapter.jms.receive.threads Property for JMS Adapter...
http://docs.oracle.com/cd/E21764_01/core.1111/e10108/adapters.htm#BABCGCEC
Cheers,
Vlad

Mail 8.2 Sending Messages from Wrong Email Account

This has been happening more often than not lately on the Mail 8.2 app. It's driving me crazy, and really messing up my business since I have a professional email (using Outlook) and a personal email (Gmail).
Both email accounts are setup on my Mac Mail. What has been happening is that when I write an email with my professional email (Outlook) and hit send everything seems fine and it will send (like it should!). It shows up in my sent messages in the Mac Mail app under my Outlook account and everything, great!... Oh, but the thing is, it doesn't really send from my Outlook account.
When I log into my Outlook account on my web browser, the email is not shown to have been sent. But, When I log into my Gmail account on the web... What?! There is the message in my Gmail sent folder! How??? It has my signature from my Outlook account and everything. To add to the strangeness, when I look at my Mail app on my iPhone, it says that the email was sent from my Gmail, and not my Outlook...
So, Mail on my Mac says sent from intended email account (Outlook), but in reality it somehow gets magically sent from my personal Gmail account... and shows up on the webpages and my iPhone as sent form Gmail... This doesn't happen every time. Just when Mail feels like it I guess, HA!
This is frustrating. Since it doesn't happen all the time, I never know if people are getting my emails, but I finally got the fluke to happen with a friend. Voila, in fact when this happens even though it's being sent in Mail though my Outlook account, my friend receives the email from my Gmail account with my Outlook signature...
What is going on? Is anyone else having this issue?
I need my personal and professional messages synced to my iPhone and Mac, or I would just say good riddance to the Mac Mail app.
I will just have to start sending my professional messages form the Outlook webpage until this is fixed. This is really unprofessional Apple. I never had this issue prior to Yosemite.
Hope this made since, it's the best I can make of it.
Thanks!

From the Mail menu bar, select
          Mail ▹ Preferences...
The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
          Send new messages from:
choose
          Account of selected mailbox
Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
In the Account Information pane, select the correct server in the menu labeled
          Outgoing Mail Server (SMTP)
If there's only one server in the menu, select
          Edit SMTP Server List...
and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
          Card ▹ Make This My Card
from the menu bar.

MAX - Message from Webpage

Similar Messages

Maybe you are looking for