Max no of 100 conversations exceeded / CPIC-CALL
Hi All,
There are more than 4000 messages in SMQ2 Tcode and when we checked the SLDCHECK we got this error-:
RFC ping returned exception with message:
max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
After increasing the value for parameter CPIC_MAX_CONV 1000 it started working but after 1 min SLDCHECK again gave the same error.
We have already checked and implemented the SAP Note :316877.
I have one doubt this Note says that CPIC_MAX_CONV value should be 5000,is it really required?
I have checked the SLDCHECK with value 1000 for CPIC_MAX_CONV .
Pls suggest the solution.
Regards,
Prashant
Edited by: Prashant Shukla on Jan 27, 2009 12:50 PM
CPIC_MAX_CONV value should be 5000,is it really required?
No, this is not mandatory. You should set it as per the load on your system.
What is the error when you perform SLDCHECK?
Regards,
Prateek
Similar Messages
-
"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded
Hi Experts,
My scernario is : RFC->File Asynch
When i do testing this scenario in Configuration (ID) -> tools-> test configuration I got below error.
Interface Mapping
Runtime error
"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
1) I have created incremented 100 to 300: Set the following environment variable CPIC_MAX_CONV=300
2) In sender RFC communication channel i have all correct parameters like: gateway service,Program ID, client number, password, userid etc
Pleas help me out.
thanks
siva grandhihi,
se this
/thread/174978 [original link is broken]
Look at SAP note 314530,316877
set this enviroment Variables:
set CPIC_MAX_CONV = 500 (WINDOWS)
setenv CPIC_MAX_CONV 500 (unix)
also check the rfc destination JCO_RUNTIME_JCOSERVER
AI_RUNTIME_JCOSERVER. if u have any error in this RFC plz refer to this link
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Thanks
Rodrigo
ps:reward points if useful
Edited by: Rodrigo Pertierra on Mar 26, 2008 11:59 AM -
URGENT : "max no of 100 conversations exceeded".
Hi.
We developed RFC Java iView for SAP R/3.
This iview connect SAP R/3 and call RFC FM in SAP R/3.
We got connection error during high load.
Error is
"max no of 100 conversations exceeded".
So, I checked SAPFactory properties using Visual Admin but I think we got enough conenction.
Here is parameter.
Expiration : Checked
Connection Lifetime : 2
Maximum Connections : 1000
Cleanup Thread : 10
Maximum Time to wait for connection : 4
JEE System has below error :
#1.5#000F203CC23C002000007C33000050550004145E2C7DAE0A#1148294628636#/System/Server#sap.com/irj#com.sap.portal.connectors.R3#rtst018#54224##hhie01_E01_4224450#rtst018#d888e6e0e97f11da9210000f203cc23c#SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.portal.connectors.R3#Plain###(R3/BW) Failed to get connection. Please contact your admin. #
#1.5#000F203CC23C00110000883F000050550004145E2C7DB625#1148294628638#/System/Server#sap.com/irj#com.sap.portal.connectors.R3#rtst417#54127####d9c05570e97f11dab72a000f203cc23c#SAPEngine_Application_Thread[impl:3]_16##0#0#Error#1#com.sap.portal.connectors.R3#Plain###(R3/BW) Failed to get connection. Please contact your admin. #
How can fix this problem ?
Regards, Arnold.Hi Arnold
When The external RFC/CPIC server cannot open any additioanl connections than u get
"ERROR max no of 100 conversations exceeded"
By setting the environment variables CPIC_MAX_CONV the library can manage more parallel connections
If an RFC server program registers with, for example, 100 threads at the R/3 gateway, 100 connections are initially kept in the server program. Every RFC running on this type of connection creates an additional entry in the connection list of the RFC server program. This means that, under full load, a maximum of 200 entries are possible.
I have not sure idea about "Maximum Connections" properties for SAPFactory in Connect Service
regards,
kaushal -
Broadcast - ERROR max no of 100 conversations exceeded
We've scheduled 3 reports to email PDF's to approx 400 users but the BEx broadcaster only managed to send out about 80 emails. in the various logs and traces I can see and error that states "ERROR max no of 100 conversations exceeded".
I can find various notes about this refering to various sytstem parameters but as far as I can tell our parametrs are set correctly e.g.
gw/max_conn 500
gw/max_sys 300
gw/max_overflow_size 10000000
gw/max_shm_req 50
rdisp/tm_max_no 200
rdisp/max_comm_entries 500
As I understand it from the notes we should increase the environment variable CPIC_MAX_CONV. However the note I'm looking at (316877) states that this environment variable is on the ITS server but from talking to our Basis support the version of netweaver we are running doesnt have an ITS server?? Dont really know what all that means. Any ideas on that one or about the error message as a whole would be greatly appreciated.
If it's any help I can also see in SM21 that at the time of broadcasting the users got the error:
> Conversation ID: 33568780
> CPI-C function: CMSEND(SAP)
Communication error, CPIC return code 017, SAP return code 450
Thren in the broadcast log via RSRD_LOG the users have the error:
Java communication error: Error when opening an RFC connection RSBOLAP017
ThanksHi,
Try using these threads, if you get some help from them.
/thread/174978 [original link is broken]
RFC_ERROR_COMMUNICATION--max no of 100 conversation exceeded
AI_DIRECTORY_JCOSERVER - ConnTest issue Error "max no of 100 conversation" -
ERROR:max no of 100 conversations exceeded
Dear All,
I m tring to comfigure SAP XI(2004sr2) in 2nd step of SLD system : Connect SLD TO SEN (if CEN Present). I m getting following error
Element 'BAPI_SLD_SUPPLIER_CONFIG_SET':Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=XIDEV SYSNR=00 GWHOST=XIDEV GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Fri May 08 14:58:46 2009
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic.c
LINE 10713
COUNTER 1
Element 'SAPDEMO.XID.Backend.Unclassified':!AbapConfigurationWriter.FM_CALL!BAPI_SLD_SUPPLIER_CONFIG_SET!AbapConfigurationWriter.FAILED!
Regards,
HitenHi Hiten,
Make sure that you have set the parameter CPIC_MAX_CONV under Environment variables --> system Variables.
For XI, the recommended value for this parameter is 400.
Regards,
Gopinathan. -
CPIC_MAX_CONV - ERROR max no of 100 conversations exceeded
I recvd the "ERROR max no of 100 conversations exceeded" and I could resolve it by setting the environment variable CPIC_MAX_CONV to a higher value for my <sid>adm per note 316877.
What I want to know is where can i check to see if this environment variable actually took effect WITHIN IN SAP (I can see it set in env and when I echo the variable) ? Can I see this anywhere within the SAP land ... in its server logs , property files etc ?
Also in general when we make changes to environment variables at the OS level pertinent to SAP then where within SAP does this get absorbed and where I can see the new values.
Pls advise.
thank you
regards
LaxmiHi Laxmi,
Please check the below thread. I have given a possible solution in the thread.
Tcode SLDCHECK error
Cheers...,
Raghu -
Max no of 100 conversations exceeded
Hello VC Experts,
I have developped a big VC application. within this there are included a lot of rfc call and functions.
sometimes it happens that the model break down because of the message above.
Does anybody know a solution except a redesign to end unnecessary rfc connections ?
I have already read sap note 314530 for searching a solution.
Thank you for help in advance.
UweHi Uwe,
I read note 314530. That means that you have a lot of RFCs which have over 200 Threads. Have you tried out to split your application in several nested iViews and put it together in one iView, so that not every RFC is active?
I never had this problem, so I have no solution for you, it's only a speculation with the nested iviews.
Best Regards,
marcel -
AI_DIRECTORY_JCOSERVER - ConnTest issue Error "max no of 100 conversation"
I have a XI System (TXT)sitting on the WAS 640. Now the above mentioned RFC Connection (SM59) gives me an error saying "max no of 100 conversation". I searched on for this and found a SAP Note No. 316877. In the SAP Note which speakes abt Maximum Number of Converstion exceeded suggests to set the value for the CPIP_MAX_CONV variable to more than 100. I have kept the value 1000(One thousand) then too I am facing the same eror.
Apart from this there is a very strange thing that I have been noticed. In The TXT( XI System) if we go to the user list i.e. to T-Code SM04 then their are about 45 entries for the user XIRWBUSER.
Incase if I lock the user XIRWBUSER and then restart the Instance then I do not face any such poblems and also my AI_DIRECTORY_JCOSERVER Connection problem gets resolved. But This is not the solution , as I will be requireing the RWB user in my XI System for one or thjer other processes.
Kindly guide me in this case.
Regards,
Premkishan ChourasiaHello Vijaya,
Thanks a lot for your useful info.
I read the SAP Note 887880 and implemented the recommeded correction. My system is working fine now.
Thanks again to you.
Regards,
Premkishan Chourasia -
Error in Portal "max no of 100 conversaction exceed" while getting 2 backnd
hi experts
i am getting following Error
RFC_ERROR_COMMUNICATION: connect to SAP Gateway failed
Max no of 100 conversaction exceed.
please suggst me the needful??
is this JCO-Destination error? or some thing Else??
Thanks
narpalHi Narpal,
By default Portal allows 100 simultaneous instant messaging sessions. But this number can be increased.
Navigate to
System Administration -> System Configuration -> Collaboration -> Real Time Collaboration (RTC) -> RTC Engine -> RTCEngine
- Switch to Advanced Mode
- Modify MaximumChatSessions parameter and set to 500
- Restart the Portal Server
The problem should be resolved then.
Regards,
Sudip -
Max no of 100 communcations exceeded EP 7.0 NW 2004s SP14
Hi Experts,
Today we were experiencing a typical error on our portal while accessing one of our backend BW system.
The error read as
Connect to SAP Gateway failed
LOCATION CPIC(TCP/IP) on local host with Unicode
ERROR max no of 100 communications execeeded.
MODULE r3cpic_mt.c
We tested the connection of the RFC destination from the BW system and it also brought up the same error.
The same was resolved only after restarting the corresponding portal server node.
1.What is exact cause of this problem?
2.Where is the value for this max no of communication set in Portal?
3.How can we avoid this problem in future?
4.Any document or note which tells in detail about the communication between portal and backend sytems.
Thanks,
JimmyHi Bala,
Sorry for the delay in reply.
So what you say is that the problem lies in the backend system i.e. our BW system and we need to change parameter on this system.
But I have note that the parameter disp/max_comm_entries and rdisp/max_arq both have current value 2000 on our BW system.
Can you please explain that how this CPIC conversations between a backend SAP system and SAP portal works?
Thanks,
Jimmy -
Clarification about parameters to be changed for max no of 100 conv excd
Hi,
In our system we had received the error:
Connect to SAP gateway failed
Connect_PM TYPE=B MSHOST=xxxxxxxxxxxxxx GROUP=PUBLIC R3NAME=xxx MSSERV=sapmsXXX PCS=1
LOCATION CPIC (TCP/IP) on local host
ERROR max no of 100 conversations exceeded
due to which some users were unable to work in the system.
The threads that i have found while searching on the topic have suggested changing the parameter CPIC_MAX_CONV=500 (or greater) as per the note 314530.
And as mentioned in the SAP note 316877:
" Reduce ~timeout on the ITS machine to enforce the automatic termination of unused sessions."
Now in SMGW i can see the "Active Connections" (first page of the transaction) and also the drop down option "logged on clients" which gives another list.
I am now trying to understand which timeout parameter controls which list.
Most of the entries in the Active connections list are from the TP jlaunch (and seem to be coming from the java stack of the same system). And most of the entries in the Logged on clients list are from the TP SAPSLDAPI.
I need to know which timeout parameter (as per note 316877) needs to be changed for the problem being faced.
Or have i misunderstood this ~timeout parameter and it should be set in Windows environment similar to the CPIC_MAX_CONV parameter ?
Regards,
Rohan.Hi,
Thanks for your responses.
I will be changing the CPIC_MAX_CONV parameter.
But I would still like to clarify about the other parameter : "~Timeout"
and be prepared to take action on this as well.
As per the (conflicting) information I have so far this seems to be some parameter that is to be maintained in each individual service in SICF ?
Or do we have any synonymous itsp* or gw* parameter which I can set for the timeout?
Regards,
Rohan. -
Sap to non sap connection ( program not registered/cpic-call
Hi all,
Im trying to connect sap to siebel system.IN TCP/IP connections iv selected register program id & passed the parameters ...program id,gateway host and gateway service
i followed michal krawczyk steps & also checked in smgw
transaction also but program id is not registered there
im getting error like program sapprog not registerd cpic/call
<b>Detailed error</b>
<b>Error</b> - program sapprog is not registsred
<b>location</b> - sap gateway on host saple / sapgw01
<b>detail</b> - Tp sapprog is not register
<b>component</b> - gateway
<b>counter</b> - 387
<b> module</b> -gwr3cpic
<b>line-</b> 1621
<b>return code</b> - 679
<b>subrc</b> - 0
please try to help me out in this issue. all inputs r rewarded.
Regards,
LavanyaHi
Thanks prince,iv checked entries in sm59, i checked smgw tranaction(gateway monitor) for logged on clients
its showing like this
number/luname/tpname/sys.type/hostname/hostaddres/last req
0 /sapnav/sapgw00/local_r3/sapnav.sapdomain.com/192.158.3.219
if i double click on above...
read/write socket = 4
handle = 4
time = tue jan 26 16:54:13 2006
socket = 1652
stat = ni_connected
type = stream ipv4
out = 1122 messages 64 bytes
in = 1 messages 64 bytes
local =127.0.0.1:3300
remote = 127.0.0.1:1848
options =
lu = sapnav
tp = sapgw00
lon lu = sapnav
long tp = sapgw00
ext program = 0
no conversation = 24
appc version = 6
hostaddr[0] =
hostaddr[1] = 127.0.0.1
offset in = 0
timeouts in = 0
connected = tue jan 24
last req = mon jan
request block number in= -1
connection out = -1
target out = -1
offset out = 0
restlen out = 0
timeouts out = 0
request block number out = -1
accept info = einfo
snc forced = 0
<b>just see gateway monitor 4 sapnav/parameters & attributes</b>Profile
parameter Value
gw/max_sleep 20
gw/conn_disconnect 900
gw/conn_pending 60
gw/gw_disconnect 1800
gw/req_stack_size 30
gw/max_conn 500
gw/max_wp 0
gw/max_conn_per_wp 10
gw/cpic_timeout 20
gw/deallocate_timeout 600
gw/reg_timeout 60
gw/reg_lb_level 1
gw/reg_lb_default 20
gw/side_info C:\usr\sap\D01\DVMGS00\data\sideinfo.DAT
gw/sec_info C:\usr\sap\D01\DVMGS00\data\secinfo.DAT
gw/startup C:\usr\sap\D01\DVMGS00\data\gwstartup.DAT
gw/stat 0
gw/tcp_security 1
gw/cpic_security 1
gw/max_sys 300
gw/max_shm_req 50
gw/max_shm_req_per_conn 10
gw/max_overflow_size 5000000
gw/max_overflow_usage 10
gw/keepalive 300
gw/reg_keepalive 300
gw/compatibility 0
gw/monitor 1
gw/netstat_once 1
gw/close_routes 120
gw/timeout 0
gw/internal_timeout 0
gw/nitrace 0
gw/accept_remote_trace_level 1
gw/resolve_timeout 0
rdisp/max_gateways 100
rdisp/max_comm_entries 500
rdisp/sna_gateway sapnav
rdisp/sna_gw_service sapgw00
rdisp/TRACE_LOGGING OFF
gw/rem_start REMOTE_SHELL
gw/remsh rsh
exe/gwrd C:\usr\sap\D01\SYS\exe\run\gwrd.EXE
snc/enable 0
snc/permit_insecure_start 0
Attributes
Release 640
Release no 6400
internal version 2
start time Tue Jan 24 16:53:47 2006
build time Aug 17 2004 23:33:51
build with Unicode TRUE
build with Threads TRUE
gateway hostname sapnav
gateway service sapgw00
req_sync_limit 24
appc_ca_blk_size 34396
gwreq_ln 34588
appcdata_ln 34316
overflow_size_limit 500000
overflow_use 0
trace level 1
trace level external programs 2
PID Gateway Reader 4952
internal version 2
Shared memory Sizes in bytes
CONN_TBL entry 1748
CONN_TBL total 874000
STATISTIC area 1392
iv changed some values for my safety.plz check it and let me know the error to register program id. Hope ull solve my issue this time.
Thanks in advance,
Lavanya. -
Can't release transports - timeoutduringallocate/CPIC-CALL
When I try to release a transport, I get the message:
>Could not start transport control program tp (TP608),
>There was an attempt to start the transport control program tp using the local RFC interface. An error
>occurred here.
>
>Error code: 4
>RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
It suggest running SMGW, but that gives me the message. Gateway monitor is deactivated
I also ran the check transport tool:
>timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time out during connection setup (check that partner exists
SM21 shows:
>Communication error, CPIC return code 020, SAP return code 456
> Conversation ID: 05807275
> CPI-C function: CMSEND(SAP)
>Tp call failed (RFC RC = 4: RFC message = timeoutduringallocate/CPIC CALL:'ThSAPCMRCV':cmRc=20thR...)
456 means: Timeout during conn. setup
I've upped the timeout of gw/cpic_timeout to 2 minutes, and still get the error.
In SM59, the RFC trace shows:
>**** Trace file opened at 20090511 212541 Pacific Daylight Time, SAP-REL 700,0,1
>======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
>Timeout during connection setup (check that partner exists)
>ABAP Programm: SAPLSTPA (Transaction: SE10)
>Called function module: RFC_TP_INTERFACE_VERSION
>User: MATT (Client: 001)
>Destination: CALLTP_WindowsNT (handle: 3, 05807275, {E4AC3EDE-FA85-F17B-83FC-001
>Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
>CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
>Timeout during connection setup (check that partner exists)
>Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817
So, I've looked at the destination CALLTP_WindowsNT - it exists in SM59. I checked the program location is correct and exists - and I ran it in a windows console. I did a connection test in SM59 and got:
>timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
>ERROR: timeout during allocate
>LOCATION: SAP-Gateway on host SecureBI / sapgw00
Any suggestions?
thanks
mattHey, nice to see you are doing some real SAP work too, and not only moderating here (just kidding - keep up the good work).
I suggest you check first if your gateway is up and running. Check the dev_rd trace file for errors (either in SMGW, ST11 or directly in the work directory). Try to telnet to your gateway :
cmd> telnet host1 sapgw00
Trying 10.2.0.1...
Connected to host1.
Escape character is '^]'.
Regards, Michael
Edit: you can also check if you see the process gwrd(.exe) -
RfcException: message: CPIC-CALL: CMRCV on convId
Hi all
From Time to time I am getting this kind of error message within Portal...
application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error. The error is: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: CPIC-CALL: CMRCV on convId: 36456775
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR connection to partner '172.23.14.11:sapgw03' broken
TIME Thu Dec 13 10:24:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 3803
DETAIL NiIWrite
SYSTEM CALL writev
ERRNO 32
ERRNO TEXT Broken pipe
COUNTER 3
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)
at com.sap.mw.jco.JCO$Repository.queryFunctionInterface(JCO.java:20810)
at com.sap.mw.jco.JCO$Repository.queryFunctionInterface(JCO.java:20496)
at com.sap.mw.jco.JCO$Repository.getFunctionInterface(JCO.java:20600)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.RFCMetadataRepository.getJcoMetadataForFunction(RFCMetadataRepository.java:72)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.AiiModelClass.descriptor(AiiModelClass.java:220)
at com.qimonda.ep.qrisp.model.orderentry.resendorder.Zpmworfc_F_Resend_Ordchg_Input.<init>(Zpmworfc_F_Resend_Ordchg_Input.java:51)
at com.qimonda.ep.qrisp.ui.orderentry.OrderEntryWizard.resendOrderChange(OrderEntryWizard.java:4591)
at com.qimonda.ep.qrisp.ui.orderentry.wdp.InternalOrderEntryWizard.resendOrderChange(InternalOrderEntryWizard.java:2080)
at com.qimonda.ep.qrisp.ui.orderentry.ResendOrderData.onActionxmlOnly(ResendOrderData.java:192)
at com.qimonda.ep.qrisp.ui.orderentry.wdp.InternalResendOrderData.wdInvokeEventHandler(InternalResendOrderData.java:208)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Can you please tell me what should be behind these errors???
Thanks a lot in advance
IvanHi Ivan,
I have same error, if you have resolved this problem? could you please tell me how to resolve this issue?
Thank a lot
Roger -
Hi All,
During the implementation of support packages on our new Solution Manager 4.0, we get the following error during the 'import proper':
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1801
> RFC MESSAGE/ERROR : 104
RFC_ERROR_SYSTEM_FAILURE
CPIC-CALL: 'ThSAPCMRCV'
CPIC program connection ended (read error)
>>>> [1] CALLTP_SunOS : TCP <ac: 2352> K schr3prd >>> CLOSE abrfcio.c 1826 (779
-{4439EB40-E755-4BE3-E100-00000A009729}
==== Delta 6 detaching (head) hRfc [1] ID 6
==== Delta 28 detaching (head) hRfc [1] ID 28
==== Delta 29 detaching (head) hRfc [1] ID 29
==== Delta 30 detaching (head) hRfc [1] ID 30
==== Delta 31 detaching (head) hRfc [1] ID 31
==== Delta 32 detaching (head) hRfc [1] ID 32
==== Delta 33 detaching (head) hRfc [1] ID 33
==== Delta 34 detaching (head) hRfc [1] ID 34
==== Delta 35 detaching (head) hRfc [1] ID 35
==== Delta 36 detaching (head) hRfc [1] ID 36
==== Delta 0 0 LOG DROPPED
Received free message 27
==== Delta 0 0 LOG DROPPED
>>>> [1] CALLTP_SunOS : TCP <ac: 2353> K schr3prd >>> FREE abfunc.c 5115 (77987
-{4439EB40-E755-4BE3-E100-00000A009729}
==== Delta 0 0 LOG DROPPED
Does somebody have an idea?
BR
Stevenhi
Check SAP notes ]<a href="https://websmp203.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200000084722004">722514</a> and <a href="https://websmp203.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200001357592002">532918</a>
<i>This problem occurs because the RFC communication partner cancels the connection to the SAP back-end system.
The error may also occur if an SAP router or a firewall between the RFC back end and the RFC program interrupts the connection because of a power failure or because a timeout has been exceeded.
Solution
You can use note 532918 to analyze the problem and determine why the communication partner for the back-end system no longer answers the RFC requests.</i>
hope that helped!
Rgds
Ak
Maybe you are looking for
-
Troubleshooting Multilink Group (Serial)
Hi, I have been asked to look at a colleague's problem and I haven't touched multilink in a while, so when I looked at the initial output form various 'show' commands I think there still might be an issue. He has indicated that everything is working
-
How to bridge my bigpond st536 to my airport extreme?
I have just received my bigpond st536 single port modem and am trying to connect it to my airport extreme so my other apples can use connection. Have read that the connection can be bridged but can not find a means of doing so on the st536 connection
-
Difference​s between User and built-in HDD password
I wolud like to set a HDD password on my Satellite. But when I get inside BIOS to set HDD password, I see two HDD passwords, one says USER HDD Pasword and the other says Built-in HDD Password. Can you tel me the difference between them and/or what is
-
How do I update my 6490m drivers to 11.7 or above (for BF3 :P)?
I've just got battlefield 3 but when I launch it it says that I have only got 11.1 driver installed for my 6490m GPU and that it recomends 11.7 and above. How do I download and install the driver? I would like to update the drivers because there is a
-
Vpn cannot coonect: vpn type = Cisco IPsec
Howdy, I cannot connect to my vpn server at work receiving this error message "The VPN server did not respond. Verify the server address and try reconnecting." I have verified, using the packet sniffer wireshark, that the first isakmp packet goes out