Max nos of fields in table maintenance generator screen

Hello,
Is there any restriction on the number of colums(fields) to be displayed in the screen of table maintenance?
Actually, I am having a Ztable with some 100 fields and when I generate the table maintenance using Single Screen, it give me error for dynpro creation. But it works with 68 or less fields.
Can anyone help me out in this?
Thank You.
reg,
Pankaj

Hi,
you can change your table:
if your table is like glt0 or lfc1,
you can assign month to key of the table :
FIELD     KEYFLAG
MANDT     X
BUKRS     X
GSBER     X
GJAHR     X
WAERS     X
MONAT     X "<-
WRBTR
Andreas

Similar Messages

Add field in table maintenance generator screen of maintenance view

Hi,
I am having a table with field user-id. I want to generate a maintenance view which will have corresponding user name as input disabled field. Since there are two tables USR21 and ADRP I need to access(not a direct check table) I will have to modify the code generated by the table maintenance generator.
Problem is that it is having one internal table EXTRACT at table control loop. That internal table cannot be accessed if you write a module inside the table control loop and try to catch. The error coming as EXTRACT is not object of structure and therefore no component. I tried to capture the value of the Loop but could not be successful. Any suggestion please.
Thanks,
Atanu

Hi,
sample:
      MODULE LISTE_UPDATE_LISTE.
    ENDCHAIN.
*--->begin of your change
    CHAIN.
      FIELD YTAB1-BILKS .
      FIELD YTAB1-BILKH .
       module check_bewar ON CHAIN-input. "your checks
    ENDCHAIN.
*-----> end of your change
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
-> module check_bewar is in an includ z123_INCL
Regards Andreas

How to disable some of the table fields in Table Maintenance Generator

HI,
I am creating one table which contains 10 fields.
But i wanted to disable some 2 fields in Table maintenance generator.
So can any one plz tell me how to disable those 2 fields.

Generate a maintenance view for the table,
Goto- Table/Join Conditin Tab-- Put the name of your table
Goto-viewfield tab--- Put the fields whatever you required.
Then generate table maintenance for the view created.
pls chk
Thanks
Anurag

Disabling fields in table Maintenance generator

Hi Experts,
I would like to restrict some fields in table maintenance generator dynamically/ statically.
Here is the situation.
I have generated table maintenance for the table ZMARA and I have created three transactions for the above single table maintenance generator.
i.e .. Transaction      ---        Table
          ZT1                  ---         ZMARA
          ZT2                  ---          ZMARA
          ZT3                  ---          ZMARA
I am using above three transactions in my module pool program. Based on the certain conditions I am calling different transactions i.e ZT1, ZT2, etc
Here is my requirement:
Suppose if I call ZT1 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZPRODH.
or remaining fields should disable. User should not allow to change the content, even if it is new entries/existing entries. only ZMATNR, ZMTART, ZPRODH.
Suppose if I call ZT2 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZHTSCODE
How can we restrict dynamically when you call table maintenance generator table through transaction
or
How can we generate table maintenance for few fields?
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:28 PM

Hi ,
go to Se11->Table maintenace generation. Double click on screen to edit and assign the field you want to display/hide to groups. In PBO , after the following lines..
LOOP AT EXTRACT WITH CONTROL
TCTRL_ZMARA                         CURSOR NEXTLINE.
   MODULE LISTE_SHOW_LISTE.
ENDLOOP.
Write a new module in PBO and edit the SCREEN as per the Tcode, you are calling,,'
Hope this helps you
Rj

How to hide fields in table maintenance generator dynamically.

Hello Experts,
                     I have one requirement and that needs to do dynamically display the fields in table maintenance generator based on the selected radio button.I have written the code in pbo but it is not working properly,can anyone figure me out in this.
Thanks,
Vinod Bhaskar.

Hi vinod
     when you are creating tmg , you will specific a function group name and sap generate a func group which contains that tmg . you can view in se80 , specifying function group name. In that , screen contains single screen 100 or two screen 100,200 .
     screen you can create module in pbo .u can find all field name in that screen.
    loop at screen.
   if screen-name = ''.
   screen-visible = 0.
   endif.
   modify screen.
   endloop.
regards,
vijay.

Search Help for field on table maintenance generator ECC 6.0

Hi All.
To maintain search help for a custom field on table maintenance generator.
Only through coding.
Cannot use domain or data element or table field search helps.
Have to code only.
Is there any way?
Can I do modifications/additions to screen code and achieve this?
Regards,
Veeranji Reddy P.

Scenarion:
1. table with 2 fields.
2. table maintenance generator.
3. Function group with one screen(0001-mentioned in table maintenance) created.
4. For one field on table maintenance generator...where we add new entries to table, i want a search help.
Conditions : only coding has to be done..no search helps I can use.
Coding where and what?
one option is to code on the screen 0001- either in PBO/PAI.
Is it a rite place...? or any other option? But no search helps as mentiond in my first message can be used.
Thanks and Regards,
Veeranji Reddy P.

Fields update on Table maintenance generator screen

HI All..
I have a custom table with five fields. I did table maintenance generator on it. It has Screen 1 as overview screen and scree 2 as single screen.
Now of the five fields two fields are user name and date. When i enter data on the other three fields and save it on the second screen - iam able to update the two fields for username and date and display on the screen two itself.
But if iam not saving the data on the screen 2 and going back to screen 1 and then save it - iam not able to update the user name and date and also to display the username and date on the screen.
Any suggestions are helpful..
Thanks and will reward helpful answers.

In this case..
Iam having the functionality of SM30 through table maintenance generator.
On Screen 2- single screen - user name and date is working as i had written the logic in the relevant PBO and PAI module.
But if user is not saving the data in screen screen2 and coming back to screen 1- which is overview screen and then try to save it-- all other fields are getting saved except the username and date..
Thanks.

Validating non key fields in table maintenance generator

Hi,
I ma using events for table maintenance generator event 05 ,there i want to validate non key fields ......i am throwing error message ....all the non key fields are getting in display mode ...i need them to enable to enter values ....
please suggest
Thanks,
Shailaja Ainala.

Hi Shailaja,
Its property of error message, which makes it as non-editable.
You can display either status or info message after validation check.
And finally before saving (before save event) display error message, so that it invalid entries doesnt get saved.
Thanks,
Nisha Vengal.

Increasing size of table maintenance generator screen

Hi
normally when we create table maintenance generator for a ztable the size of the maintenance screen will be standard
can any one tell how to increase the size of that screen.
vamsi

Hi
Check the links
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
/message/2831202#2831202 [original link is broken]
Reward points if useful
Regards
Anji

Canceling previous table maintenance generator screen

Hi all,
When we create a screen via table maintanence generator to enter data into the table.
However I want to cancel this action, is it possible? That is, I have used table maintenance generator and completed the all process, however now I want to cancel it...
Thanks.

Hi,
There is a delete button in Table Maintenance Generator. Click it. Select all the Options and click Delete.
Awrd points if useful
bhupal

SELECT-OPTIONS in table maintenance generator screen

Hi
Is it possible to create SELECT-OPTIONS in table maintenance screen?
My requirement is to allow the user to enter single Company code and Range of G/L Accounts in the Table Maintenance input screen. Please let me know.
Thanks
Abdul Hakim

Hello Tamas,
As a matter of fact we can add a custom selection-screen to the TMG screen & without manually modifying the TMG
You can do so by using the [Event AA: Instead of the Standard Data Read Routine|http://help.sap.com/saphelp_nw04s/helpdata/en/91/ca9f56a9d111d1a5690000e82deaaa/content.htm].
Please check the code snippet:
DATA: gv_fldate TYPE s_date.
* User-defined selection-screen
SELECTION-SCREEN: BEGIN OF SCREEN 9000.
PARAMETERS:     p_carrid TYPE s_carr_id OBLIGATORY.
SELECT-OPTIONS: s_fldate FOR gv_fldate OBLIGATORY.
SELECTION-SCREEN: END OF SCREEN 9000.
*&      Form sub_yvsflight_event_aa
*       text
FORM sub_yvsflight_event_aa.
DATA: ls_temp_data TYPE yvsflight,
        lt_temp_data TYPE STANDARD TABLE OF yvsflight.
* Call the user-defined selection-screen
CALL SELECTION-SCREEN 9000 STARTING AT 25 10.
* Populate the int. table TOTAL
PERFORM get_data_yvsflight.
* Delete the records which are not required
LOOP AT total.
    ls_temp_data = <vim_total_struc>. "Copy to local struct.
    IF ls_temp_data-carrid NE p_carrid OR
       ls_temp_data-fldate NOT IN s_fldate.
      DELETE total. "Remove the record from the TOTAL
    ENDIF.
ENDLOOP.
ENDFORM.                    "sub_yvsflight_event_aa
BR,
Suhas

Currency field in Table maintenance generator

Hi,
I have created a table with fields amont and currency..When I create generate the table maintenance for this table I am not able to see currency and amounts field on the generated screen. Please do help me whats missing from my end.
raghu

make the foriegn key for the currency TCURC
This was for those whose currency keys are not maintained
Resaon might be the Currency is not maintained in the table TCURC
they can be maintained in SPRO
SAP Netweaver - > General Setting - > Currencies - > Check Currency Codes
Regards
- Gopi

Need to Disable field in Table maintenance generator

Hi Frds,
I have created a custom table .But i stuck at one point. In the TMG one field is User ID and next field is filled with Full name of this User ID(made it noneditable). To get user name i implement '01' event in TMG. and its working fine. But when i change the user ID in the row ramdamly the user name is not updated. its because Event not trigger.
Please help me by giving valuable suggestion either of two query.
1) When any row field value get change. Which TMG event trigger and capture the changed row
2) How can i make field disable once it get filled and saved.
Thanks
Imran

Hi,
When you create any entry in TMG event get occurred is 05 and if you are changing any row content than you have to use 01. And if you want to disable fields ,double click on overview screen number which is you have given when you created TMG and than it opens flow logic of screen than click on Element List tab and uncheck the fields which you wants dsiable in input column as i am attaching screenshot have a look at it.
in this user ID is unchecked.
Regards,
Shahezad

Purpose of table maintenance generator

wht is the purpose of table maintenance generator

Hi Pavan,
The purpose of table maintainence generator is to enable the table maintenance through SM30, and to implement and validation etc on table field inputs.
SE11->Utillities->table maintainence generator
You need to enter the values of following fields:
1. Table name
2. Authorization group , and authorization object (select the suitable one )
3. Function group and package
4. Maintainence type : single or double screen maintainence view depending on the option selected.
5. Maintain screen number : you may specify a value or let the system generate one for you.
The validation code for the table entry is written in the flow logic of this screen. Even some of the fields may be made display only , by adding suitable code in the logic or directly disabling the input in table control in the layout.
Table maintanance is for creating,adding datas to an existing table.
it is for adding muiltiple records at a time in the table
A table can be manipulated by a program or manually.
When creating table, you will find a check box 'Table maintenance allowed'. If we
check that option, we can manually enter entries using SE16 or table
maintenance generator screen.
SE16 is for data browser.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table
maintenance generator.
In the table maintenance generator screen, we should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually we will create with one
step. we should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table
entries by choosing Maintain.
In the production system, end-users will not be having access to transaction
codes like SE11 and SE16. Developers will not be having access to many
transaction codes including the above two.
To view the contents of the database table, we will use SE16n in Production
system. Please find out the difference between SE16 and SE16n.
All these authorizations will be maintained by BASIS team, by creating access
profiles.
So in order to edit or create the contents of a database table, we should go for
table maintenance generator. In real time, authorizations will be maintained in
production system. (even in development and Test systems to some extent).
There is an audit like Sarbanes-Oxley Act for American clients, where every thing
will be audited by government agency. To know more about SOX, use the links on
the right hand side of this page.
The second reason is, we can edit or create multiple entries at a time, using table
maintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance
screen SM30. Please try to find out the use of those, by creating an example.
Table Maintenance generator: Difference between one step and two steps.
While creating table maintenance generator, we find below options:
When we choose one step, we have to give the screen number in Overview Screen field.
When we choose two step, we have to give both overview screen number and single screen number.
You can give any number for screen. Dont give 1000 screen number. As this
number is reserved for selection screen.
When we choose two step, two screens will be created for table maintenance. For
single step only one screen will be created.
When we choose two step, table maintenance will work as follows
Go to SM30, give the table name for which you have created table maintenance-
Overview screen will be displayed. To create entries, when you click on new
entries. Another screen will be displayed, where you give input and save. You can
enter one record at a time.
Go to SM30; give table name for which you have created table maintenance-
Overview screen will be displayed; To create entries click on new entries, you can
enter the records on the same screen. You can enter multiple records at a time.
We use single step generally, as it is user friendly.
To completely understand the difference and above points please do exercise by
creating table maintenance generator in both ways (using single step and two
step).
Link: [http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm]
Link: [http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm]
Link: [/message/2831202#2831202 [original link is broken];
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.

Addition of a new column in Table Maintenance Generator

Hi All,
I have a requirement in which I have to include a new field in Table Maintenance Generator . This field is not present in the table but its data will be fetched from another table . Pls help me in this regard.
I have little idea of Table control .
Regards,
Nibha

Hi Nibha,
Table maintenance generator screen is an automatically generated screen. You cannot to any changes in that and neither can you do the changes in the PBO and/or PAI.
You can do it but it will ask you for SAP key etc. So there's not need to do it that way.
What you could do is;
1. Go to the table maintenence generator from SE11, in Change Mode.
2. Click on change icon. The system will show the 'Change Generation Elements' screen where it sill ask you the resson
    for change.
3. Click on the New Field/Sec. table in struction (or whichever is appropriate/applicable in your case)
4. Press Ok (Tick sign).
5. Then it will show you the ''Change Generation Elements: Detail' screen.Here;
       => You will select the maintenance screen that you wish to change( Overview/Single).
       =>   And the Field Type. Whether it is a key field or normal field.
              Select which ever is applicable.
6. The system will then re-generate the screen for you and - You'll Smile! - that you got the answer!
Cheers!
Sanjiv

Max nos of fields in table maintenance generator screen

Similar Messages

Maybe you are looking for