MAX not detecting PCI 6259 connected to BNC 2120

I have the DAQmx driver 9.0.2
I have the card (PCI 6259) in a windows XP machine
The breakout box is a BNC 2120
MAX does not detect any devices and interfaces.
Thanks for any help,
Fmiles

Does your device show up in Device Manager under data acquisition devices? If not than it is not being recognized by the computer and you should try moving PCI slots on the card. If it does not show up under data acquisition devices, right click on it and select uninstall, restart the computer and it should install on its own again.
Was the card installed during the DAQmx install, try reseating the card.
Make sure the NI Device Loader Service is started in Control panel»Administration»Services. It should be set to started and automatic.
Does DAQmx 9.0.2 appear under Software in the Configuration Pane of Measurement and Automation Explorer, if not, it may not have installed correctly.
Doug Farrell
Product Manager - Condition Monitoring
National Instruments
National Instruments Condition Monitoring

Similar Messages

Adobe creative cloud desktop is not detecting my internet connection?

adobe creative cloud desktop is not detecting my internet connection?

i connected with the adobe people through 'contact an agent'.
very helpful, they remote managed my desktop to fix the issue.
apparently something to do with permissions not activated for adobe, not sure how and why this happens though, or why it was fine earlier and suddenly stoppped.
they insisted it was to do with being on a wifi connection but that's not possible because i have my laptop right next to my desktop and that was working fine.
it took about four hours to fix though, so be patient!

I have downloaded itunes, however everytime I open it up deos not detect my internet connection even though it is running?

I have downloaded itunes, however everytime I open it up deos not detect my internet connection even though it is running. I can goto other sites when I open up explorer, but itunes just will not connect. Could someone assist? I have windows 7.

Set it up with SMB compliant names.. that means, short, no spaces and pure alphanumeric.
Set a different name for 2.4ghz and 5ghz..
Set security to WPA2 personal with pure alphanumeric password.. 10-20 characters is usually plenty.
Set wireless channel for 2.4ghz to manual and try channels 11, 6, 1 in that order.

MOVED: K8N Neo Platnium not detecting PCI cards

This topic has been moved to Intel P4 & Celeron P4 based board.
K8N Neo Platnium not detecting PCI cards

I had a similar problem with a 945p neo platinum board. Anything I plug into any PCI slot didn't detect. I solved the problem by flashing to the latest BIOS for the board. Now everything seems to be working fine.
Maybe that might work for you?

880GMA-E35 does not detect PCI ethernet adapter

Mainboard 880GMA-E35 does not detect PCI ethernet adapter RealTek RTL8139D.
What is the reason?
I did tests with the operating systems Windows XP 32-bit and Windows 7 64-bit
my Computer:
MSI 880GMA-E35
AMD Athlon II X2 240, 2800 MHz
2 X 4GB Kingston module memory 1066 MHz
XFX Radeon HD 4670

In your manual (page 27) it shows 'Auto Disable DRAM/PCI Frequency.. 'Enabled' turns 'off' clocks in the PCI slot.
Just wondering in an attempt to help.
Good Luck

Max Not Detecting PCMCIA GPIB Card

I'm having trouble getting NI MAX to detect that I have a PCMCIA GPIB Card in the computer. The C-Drive under hardware manager knows it's in the slot and says it's working fine. I tried to uninstall the GPIB Card so I could reinstall it but it won't let me.
I also tried adding hardware to MAX and selecting the PCMCIA card but it says that it can't be added.
I'm using the latest versions of GPIB, VISA, and MAX software that I can on a Windows 2000 computer.
Thanks

Hello,
When you say MAX is having trouble detecting the card, what exactly is happening? Do you see the card in MAX, but then you can't communicate with it? Does it show up with an error, or does it not show up at all? Could you give me the exact error message that you see. Are you using this on a laptop, or are you using a PCI-PCMCIA converter on a desktop? Does this happen on multiple computers? And just to verify, what version of NI-488.2 are you using? Hit <F5> in MAX to refresh the window and see if it shows up then. You could also try reinstalling the NI-488.2 driver, to see if it helps. Please let me know the answers to the questions above, and we can go from there to try to get this issue resolved. Thanks!
Regards,
Ebele O.
National Instruments

Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party

N9 not detected via USB connection

Since last few months I have observed that my Nokia N9 is not detected via any PC if connected via USB cable. The USB cable is OK because my other devices are easily detected through same cable. Can anyone suggest solution. I have already try to "Clear device" under settings->Reset.
Please help.

@girishpadia
Presumably your N9 still charges when connected to PC USB?
Does this apply to both Nokia Suite and Mass Storage mode presupposing that Nokia Suite is installed upon PC?
Happy to have helped forum with a Support Ratio = 42.5

T410 running Windows 7 not detecting HP LP3065 connected with DisplayPort to DVI Dual-Link

I am running Windows 7 on a Thinkpad T410. I have an HP LP3065 monitor connected to it using an Accell DisplayPort to DVI Dual-Link adapter. Windows 7 does not detect the monitor. The NVIDIA drivers are up to date and I have tried powering the Accell adaptor with multiple USB ports. I do not know if there is a problem with the adaptor or if Windows 7 is just unable to see the monitor with this combination.
Could someone please let me know how I can diagnose this? Thank you in advance.

Similar issue: my T410 does not detect LG W2343T-PF (1920x1080) connected with DisplayPort to DVI Dual-Link Cable
T410 with integrated graphics
Type: 2516
BIOS: 1.09 (2010-01-07)
Embedded Controller: 1.03
Windows7 Pro x64
drivers are up-to-date with Lenovo
the same DP to DVI Dual-link cable was able to connect to Dell 1280x1024 monitor in my office.
Maybe I should used single link DVI cable.
I will do more testing this evening
(1) to test the connection on difference 1280x1024 monitor this evening at my home
(2) try different cable - something link DP to DVI Single-link cable
Meanwhile, just want to check others experient working with DisplayPort on T410/T510 as I really need to use dual external mornitor with my T410.

K8N Neo Platnium not detecting PCI cards

This is my second K8N Neo 2 Platnium board. Both of them have failed to detect the cards in the PCI slots. I know for sure that both of the cards work in my old system since i had to switch back to my old parts when i was getting my first board RMAed. The two cards are:
Creative Audigy 2 ZS sound card
Promise 100TX ATA controller card
I've disabled the onboard audio in BIOS, but that wouldn't matter since its not detecting either card. I've done the "search for new hardware" wizard in Windows XP Pro w/ SP2 and all updates as of Sept 26, 2005. I've tested it both inside and outside of the case so it isn't shorting.
I am P*ssed off.
Frankly, this is unacceptable. Not only that, but upon inspecting the second board right out of the package, I saw that it has been ran before. Long enough for dust to collect on some caps and on the SATA slots around the nForce chipset. Also, there were little rings around the mounting holes from where screws have obviously been screwed in before.
Not to mention i had to call them to send my RMA out. Website said it was ready to be shipped on 9-14-2005, I called on 9-20-2005, and it finally shipped out the following day.
I am not happy with my MSI purchase. This coming after hearing so much good about this company. Unless this problem is resloved I doubt I'll ever buy another one of their products again.

I had a similar problem with a 945p neo platinum board. Anything I plug into any PCI slot didn't detect. I solved the problem by flashing to the latest BIOS for the board. Now everything seems to be working fine.
Maybe that might work for you?

LELA Not Detecting an Internet Connection, yet is connected?

I use a WRT54GS wireless router, and recently it's been going slow. I went to go restart the router as we had to so many times before, and realized that the internet was not connected(or at least, that's what it said). So I figured, oh, that's why it's not working! After going through the restart process 3 times, I still couldn't connect. I looked down at my taskbar and it said that I had an internet connection. So I clicked on Internet Explorer and to my surprise I was indeed connected to the internet.
So now, I sit here typing this, on the computer which is supposed to have no internet, and cannot send an internet connection to any of my other wireless devices because LELA says I have none. I've tried reseting the modem and all that, but to no avail. Any help as to why this is?

Thank you very much jscell and Dr. Clap
No, because that is a conceptual rather than a realconcept<
I tend to disagree somewhat � it is a conceptual as
well as a very real concept. I am using this concept
and it works(still in the trial phase though). The
only problem is the pop-up Windows dialog box.Yes but you computer doesn't connect to the "internet". It connects to another computer. That is all it can do because that is how IP works (tunneled or not.)
>
If you want to monitor traffic via java then youwould have to use JNI.<
Thanks for this. I�ll have a look at this. A piece of
code to get me started on this would be appreciated.I am not sure it exists. But if you want you can look at http://netresearch.ics.uci.edu/kfujii/jpcap/doc/index.html
>
And you should be able to configure it so that itdoesn't ask you, but just automatically makes the
connection. How?<
Yes Dr. Clap, you may be right. I was hoping there was
somehow a way out without fiddling around with the
property settings. I am sure there is, but not in java. So doing it in java would require JNI (and a lot of digging to figure out how to do it using the windows C API.)

Macbook not detecting iphone is connected

Got a problem..
My macbook won't detect that it's connected!
I've tried 2 different usb cables, and interchanged them on my PC just to make sure both cables are working (They are - The PC detected the iphone no problem)
But my Macbook doesn't pick up anything! Tried both USB ports - they seem fine, as I can connect my mouse to them with no problems
Just did the 3.0 upgrade yesterday on the macbook, so the problem has only occured today.
anyone else had similar prioblem?
macbook 10.4.11
itunes 8.2
iphone 3G with 3.0 OS

thanks for the reply Ingo..
It seems to be working now (weird!)
I tried looking in iphoto - and didn't see the iphone
then had a look in the system profiles, as you suggested - and sure enough the iphone was listed in the usb ports.
restarted the macbook again, and my iphone happily beeped that it had made a connection, and itunes launched as normal.
So it works - But I'm unsure as to why I had this problem (I had restarted the machine a couple of times prior to your suggestions, and didn't have any connection - But it works now, I'm happy)
cheers

Easylink does not detect internet connection

Please help. I have a wireless G broadband router model wrt54g. I've had it for about a year in a half and used it maybe twice. I just ran the setup and got an error saying easylink does not detect your internet connection. I went on line to make sure I was connected and followed the steps to resolve this issue. I got a message saying congratulations your router was configured succesfully but you are not yet connected to the internet. I went online to try and get help with this issue and downloaded firmware. My comptuer won't even allow me to run the download, it just does nothing when I click on it. Could someone please advise me as to how to get this router to detect my internet connection. Thanks

Who is your Internet Service Provider..?
Are you getting the internet connection,when you connect the computer to the modem directly...?
If your Internet Service Provider is Cable follow this link
If your Internet Service Provider is DSL follow this link

Sound card not detecting digital cab

I'm having a problem getting the digital out to work on my X-Fi Gamer. I purchased the card and also the breakout box that provides s/pdif i/o via coax and digital through the /8 jack. I connect it via an optical cable to my surround receiver. I've installed all the proper software, etc, and I can get absolutely no sound.
My thought is that the card is not detecting my optical connection. In the "flexijack" options everything is grayed out and I cannot choose digital at all. In speaker set up it has the analog connections marked at plugged in (with cords coming out) and not the flexijack connection. Only the flexijack is plugged in on the card, though. Per other posts on the boards I've made sure no other sound devices are set as default, and my onboard sound is disabled completely. I'm using a creative approved adapter (the digital i/o box) with a working cable, and working receiver. Any help would be really appreciated.
I'm running windows Media Center XP 2005, by the way.

Hey MrE, did you ever get this issue sorted?
I had exactly the same symptoms recently with my new system build, and it ended up being caused by a conflict with my video card. When I booted the system using the motherboards onboard video, my ice1712 card would then be detected by ALSA and worked as it should.
I ended up moving my video card to the 2nd / bottom PCI-E on my motherboard and this got around the issue

Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1
We do not want to make any transfer of data or cloned.
We want to do a clean install with Windows 8.1
The BIOS recognizes the SSD
But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive
https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg
i too test with lasted version of this driver (old F6 in boot to locate hdd driver)
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip
and with toshiba package
http://support.toshiba.com/support/viewContentDetail?contentId=4004211
you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1
But always the drive CRUCIAL is not reconized by the boot instalation of windows
The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.
any help?
Thanks

Hi
Did you solve this issue?
Could you install the Windows 8.1 system on this SSD drive?
I think the additional driver installation while setup procedure isnt necessary since Win 8.1 should already contain the essential drivers.
From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).
How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?
Feedback would be appreciated.

MAX not detecting PCI 6259 connected to BNC 2120

Similar Messages

Maybe you are looking for