Max Number of Bitlocker Encryptions

Unsure if this is the correct place to ask, but do you know if there is a maximum number of USB drives one person can encrypt on a single computer that saves passwords to Active Directory.
A user gets access denied when trying to encrypt a USB stick like he normally would. We see in the PC container that he has 48 recovery passwords saved with AD. Would this be causing an issue with his USB drive encryption?

Hi.
I don't think the number is a concern. Never read about that being a problem and MS would tell you, I am sure. The space consumption in AD is ridicoulus, at least.
I would try another USB device and if it does not work, test another user on the same machine. If that does not work, I would take a VM, programatically format a test partition, encrypt it, decrypt, encrypt... until I reach that number - I bet it won't stop
there.

Similar Messages

Problems with Comodo Kill Switch, Windows Services & Bitlocker Encryption on Asus N56VZ

Hi All,
So recently I found myself stuck in a different scenario than before, and after many hours researching and efforts to fix this I still find myself stuck yet with a few options still to fix.
What is the problem?
So as a security cautious user when i first got to Windows 8.1 Pro 64Bit I encrypted both the C and D drive (Split the main disk) to protect myself and my family. Unfortunately that has not been very helpful with the way in which booting and running from
either external USB devices or CD/DVD works, not allowing myself to at all.
My usual security suit I use is Comodo Internet Security, which additionally comes with Comodo Kill Switch. Whilst using the application instead of stopping one of the TCP connections I was meant to I accidently stopped an Windows Explorer connection.
For some reason since then Windows Explorer, nor most windows apps or services themselves will run. For example msconfig will run but sfc /scannow or mmc will not, whether in safe mode or normal mode.
What Caused the Problem?
Cannot 100% say
What I Think Caused the Problem?
Myself running Comodo Kill Switch stopping a vital server connection with Windows Explorer that messed up alot. Or a potential Virus unknown how cannot fully scan system as wont boot externally or run many apps.
Additional Info
Asus Webcam is Disabled on Purpose
Laptop was fully customized to run latest games full graphics minus Anti Aliasing, works with Evolve + CoD Advanced Warfare
Laptop does not boot if USB Keyboard plugged in, works with everything else normal (had this on other systems no problem for me)
Ask me for more info if required to add here, braindead again
Specifications of my system
Intel® Core™ i7 3610QM Processor
Windows 8.1 Pro 64Bit
Intel® HM76 Chipset
DDR3 1600 MHz SDRAM, 2 x SO-DIMM 8GB
15.6" HD (1366x768)/Full HD (1920x1080)/Wide View Angle LED Backlight
NVIDIA® GeForce® GT 650M with 2GB DDR3 VRAM
1TB 5400RPM OR 750GB 5400/7200RPM (Cannot remember off top of head, braindead)
Super-Multi DVD
Kensington lock (Security Feature)
LoJack (Security Feature)
BIOS Booting User Password Protection (Security Feature)
HDD User Password Protection and Security (Security Feature)
Pre-OS Authentication by programmable key code (Security Feature)
What Can Run and Won't Run?
ON BOOT:
Bitlocker Encryption Password & Advanced Settings are accessible
Bios (password protected) is accessible
Windows Recovery Mode is accessible (Think it is F9 or F10)
Windows Logon Password Screen is accessible
ON NORMAL/SAFE-MODE START UP:
After Log-In Windows Explorer will not run
Task Manager will run, also allows me to browse the files when trying to start new task
Can run Command prompt
Cannot run any control panel items
Cannot run services.msc
Cannot run mmc
Cannot run sfc
Every time it metions windows drive is locked
Start Error's when running certain applications (Will post codes soon)
Rufus USB Tool does run
Cannot boot Kali Linux off USB
Cannot boot Windows 8.1 off USB
Cannot boot Windows 8.1 off DVDRW
Fixwin2 will not run
Apps either work or don't whether in safe mode or normal
Cannot use Windows Installer
What Fixes I Have Tried So Far
Ok so like any normal user I don't want to lose my files. So here are what I have tried so far:
Repair MBR (Repair Completed, No Luck)
SFC /SCANNOW (Returns Error 'Windows Resource Protection could not start the repair service')
Tried sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows (Could not access drive)
Fixwin2 (Will not run in either normal or safe mode)
Booting using Windows 8.1 via USB (Cannot boot from extermal devices due to Bitlocker Encryption)
Booting using Kali Linux Via DVD & USB (Cannot boot from external devices due to Bitlocker Encrytption)
How do I know it is because of Bitlocker, because last time I disabled it, I could run from external devices
Tried to run bitlocker to change settings (Will not run)
Have used both password and recovery keys to unlock driver, they work but when applications are running on windows the drive is still locked?
Tried windows Automatic Diagnostic and Repair (Could not repair anything, did make a log I am still to extract from the syste)
There are No System Restore Points
I'm sure there is much more information I could post however I will leave it on an ask to know basis, apart from the log files and further information to gather. Below is my list of trial and error fixes to try for today (need more ideas and help please!):
Hiren's 15.2 Boot CD via DVD (NOT ABLE TO BOOT)
Hiren's 15.2 Boot CD via USB (NOT ABLE TO BOOT)
Research into the Bios and Possible Update in-case of implementation of Virus, can access flash utility (STILL NOT TESTED)
Try and get a portable version or a working version of windows installer to try and re-install Comodo Internet Security (STILL NOT TESTED)
Another way to disable Bitlocker
Anti-Malware / Anti-Virus Scan If Possible to Run One
Bitlocker Repair Tool, will try this also
I have posted this as have not found much info online, usually find it and crack on but this time things are a little more tricky, my priority task I really need to do is remove the Bitlocker Encryption, but if the application will not run... what do I do
then?
Thanks for your time reading all, Sorry for any poor formatting or spelling.
Update 1: MMC.exe Error Code
Ok so now have the computer in safe mode, still same as before, no explorer.exe, no services etc... Just went into the Task Manager > Services (Tab) > Open Services (Option at bottom)
This is the error I get:
'The Instruction at 0x785a746c referenced memory at 0x000000a8. The memory could not be read.
Any Ideas on what this error is and why?
Update 2: CHKDSK Works with no Fix
Update 3: Hiren's 15.2 Boot CD - USB Boot still no luck booting around Bitlocker Encryption
Just to explain again, I already have unlocked the drive with correct bitlocker password or recovery key yet the drive remains locked not allowing windows refresh of files of complete install from the windows recovery menu as keeps saying drive is locked

Ok so attempt number two to write this update via bloody phone! (Just refreshed page whilst writing!)
Update 4:
Problem - cannot run from bootable devices (DVD/USB)
Cause - bitlocker fully encrypted drive stops this working
Repair - Boot up holding F9 to enter windows recovery Input Bitlocker recovery keys to unlock drives
Navigate to Command Prompt in advanced settings Execute following code:
Repair-bde c: d: -rp 000111-222333-444555-etc...
(Code found from https://technet.microsoft.com/en-us/library/ee523219%28v=ws.10%29.aspx)
Note for those using this: It is common while unlocking certain drives to get errors such as: Quote from http://www.benjaminathawes.com/2013/03/17/resolving-partial-encryption-problems-with-bitlocker/
"LOG INFO: 0x0000002aValid metadata at offset 8832512000 found at scan level
1.LOG INFO: 0x0000002b Successfully created repair context.
LOG ERROR: 0xc0000037 Failed to read sector at offset 9211592704.
(0×00000017) LOG ERROR: 0xc0000037 Failed to read sector at offset 9211593216.
(0×00000017) …followed by around 20 similar entries that differed only by the offset value"
Repair Status for Update 4: COMPLETED - However over wrote D drive data so now need to recover that
Problem 2 - windows services corrupted along with windows files
Cause - Unknown
Repair - wait until system is fully decrypted Once fully decrypted ensure boot from USB/DVD
Re-do fixes that would not work before if this has fixed boot issue Confirm fix / update post Hope anything I put here helps others also

HT204053 Max number of devices on one iTunes account?

Max number of Devices on a single iTunes account

Devices or Computers? The former there is no limit. For the latter there is a limit of 5.

My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it.

My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it. When asked to encrpt the Shuffle I say no, but still not recognized. When I encrypt it, still not recognized (even after it was restored by iTunes). Any suggestions please?

Did you find a solution?
My touch is doing the same thing.

Is Diskpart unable to clean bitlocker encrypted Windows 8 to go installations?

Hi all.
I am aware that this is a configuration that not many of you will have, but worth a try...
I am running windows 8.1 enterprise x64 installed on a USB drive as windows to go. The USB drive is a supported one for this configuration, Kingston Data Traveller 32 GB. Also I use bitlocker to encrypt the whole drive and all works very nice.
Lately however, I wanted to restore an image backup to the drive, so I plugged it into another pc running windows 8.1 enterprise.
The imaging software however was not able to write to the drive and told me, it is in use. So I looked at explorer, but it was not even mounted, which is expected behavior with windows 8.1.
To overcome the problem, I tried to clean the drive using diskpart and this is where the question starts: Although diskpart told me that cleaning was successful, the imaging software was still not able to write to the drive! So I said, "damn
it, win8.1, what's wrong? I'll use windows 7 to replay the image to the drive!"
On windows 7 I was flabbergasted after inserting the drive: I was presented a message from bitlocker to go which asked me for the password (which I provided and which worked). I did not get that on 8.1!
Attention, the question is right here:
Why is diskpart unable to clean the drive? Why does it tell me "cleaning was successful" (and I could verify that, partitions were indeed removed) although it is obviously unable to remove the bitlocker info?
So far, my understanding of diskpart's clean command was that it completely resets the drive.
Am I right, or what did I miss? Is diskpart not supported on "windows 8.1 to go"?

I dont think diskpart will remove bitlocker encryption.. To remove encryption you must use decryption method.. If you have forgotten password you have to use bitlocker recovery key
Try try Bitlocker repair tool if the partition is damaged..http://www.microsoft.com/en-us/download/details.aspx?id=17294
"The BitLocker Repair
Tool can assist administrators in recovering data from a corrupted or damaged disk volume that was encrypted with BitLocker."
Using the BitLocker
Repair Tool to Recover a Drive
http://technet.microsoft.com/en-us/library/ee523219(WS.10).aspx
http://support.microsoft.com/kb/928201
If you have lost your password or recovery key check these
I
Lost My Bitlocker Recovery Key
http://www.pcandtablet.com/windows-8-errors-and-crashes/279/i-have-lost-my-windows-8-bitlocker-key-now-i-cant-boot-how-can-i-recover-my-data.html
http://windows.microsoft.com/en-us/windows-8/bitlocker-recovery-keys-faq
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

SCCM 2012 SP1 CU5 - Unknown error code when deploying Bitlocker encryption (happens during check for Bitlocker partition)

Hi
It says in the smsts.log file from the laptop:
Evaluating a WMI condition expression TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: root\cimv2 TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: SELECT * FROM Win32_DiskPartition WHERE DiskIndex = 0 and Index = 0 and Size = 100 TSManager 03-02-2015 13:34:58 7304 (0x1C88)
The condition for the action (Create BitLocker partition) is evaluated to be true TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: smsswd.exe /run: cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Start executing the command line: smsswd.exe /run: cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet TSManager 03-02-2015 13:34:58 7304 (0x1C88)
!--------------------------------------------------------------------------------------------! TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: WinPEandFullOS TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Executing command line: smsswd.exe /run: cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Creation event received for process 7976 mtrmgr 03-02-2015 13:34:58 4564 (0x11D4)
[ smsswd.exe ] InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
PackageID = '' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
BaseVar = '', ContinueOnError='' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
ProgramName = 'cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
SwdAction = '0001' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
Getting linked token InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
failed to get the linked token information. It may not be available. Error 1312 InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
Process ID 7976 is for process C:\Windows\CCM\smsswd.exe mtrmgr 03-02-2015 13:34:58 4564 (0x11D4)
No matching rule found for process 7976 mtrmgr 03-02-2015 13:34:58 948 (0x03B4)
Working dir 'not set' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
Executing command line: Run command line InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
Creation event received for process 7452 mtrmgr 03-02-2015 13:34:58 4564 (0x11D4)
Process ID 7452 is for process C:\Windows\system32\cmd.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Found match against RuleID LGR00188 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Creation event received for process 7940 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Tracked usage for process 7452 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Process ID 7940 is for process C:\Windows\system32\conhost.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Creation event received for process 3104 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Found match against RuleID LGR00183 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Tracked usage for process 7940 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Process ID 3104 is for process C:\Windows\system32\BdeHdCfg.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Creation event received for process 7552 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
No matching rule found for process 3104 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Process ID 7552 is for process C:\Windows\System32\vdsldr.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Creation event received for process 7152 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
No matching rule found for process 7552 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Process ID 7152 is for process C:\Windows\System32\vds.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
No matching rule found for process 7152 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Termination event received for process 3104 mtrmgr 03-02-2015 13:35:00 4564 (0x11D4)
Termination event received for process 7452 mtrmgr 03-02-2015 13:35:00 4564 (0x11D4)
Process completed with exit code 3231711234 InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
Termination event received for process 7940 mtrmgr 03-02-2015 13:35:00 4564 (0x11D4)
BitLocker Drive Preparation Tool version 6.1.7601 InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
opyright (C) 2006-2008 Microsoft Corporation. InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
Command line returned 3231711234 InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
Termination event received for process 7976 mtrmgr 03-02-2015 13:35:01 4564 (0x11D4)
Process completed with exit code 3231711234 TSManager 03-02-2015 13:35:01 7304 (0x1C88)
!--------------------------------------------------------------------------------------------! TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Failed to run the action: Create BitLocker partition.
Unknown error (Error: C0A00002; Source: Unknown) TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set authenticator in transport TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set a global environment variable _SMSTSLastActionRetCode=-1063256062 TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Clear local default environment TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Failed to run the action: Create BitLocker partition. Execution has been aborted TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set authenticator in transport TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Failed to run the last action: Create BitLocker partition. Execution of task sequence failed.
Unknown error (Error: C0A00002; Source: Unknown) TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set authenticator in transport TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Termination event received for process 6188 mtrmgr 03-02-2015 13:35:03 4564 (0x11D4)
Termination event received for process 7552 mtrmgr 03-02-2015 13:35:06 4564 (0x11D4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 03-02-2015 13:35:07 7304 (0x1C88)
**************************************************************************** TSManager 03-02-2015 13:35:07 7304 (0x1C88)
Task sequence execution failed with error code 80004005 TSManager 03-02-2015 13:35:07 7304 (0x1C88)

Hi Jason
See below. The problem is that on some of our laptops not anywhere geographically close to our IT department, the laptop has been setup with 2 partitions and on some only with 1 partition (we used another deployment system 2 years ago), so I am trying
to prepare all our corporate laptops for Bitlocker encryption. The reason why I made this task sequence was to hit all those laptops that is not being reinstalled / installed again in the near future.
Do you have any suggestions, should it help to remove the cmd.exe /c in front of the Bitlocker cmd line ?
We have tried the MBAM solution, but in my opinion too many problems with the MBAM client.

BitLocker Encryption ToGo; Decryption Issue.

I currently have a USB drive that has been partially encrypted with BitLocker Encryption, but will not allow me to unlock it. I have looked for many resources on solving this issue, but have decided to post my details.
I am running Windows 7 Enterprise. I have the Password and I have a FIPS-140-2 complaint Recovery Key. All of my USB drives have the FAT32 file system. I do not have a TPM or Smart Card, but i do have the 256 bit FVE key. I have not tried unlocking on another
computer with BitLocker Encryption.
First of all i successfully encrypted one USB drive with no issues and stored the key on another USB drive. Next I encrypted a hard disk drive and stored the key on the same USB drive. Next i begun encrypted the USB drive that had the keys stored on it,
but realized i had to have had encrypt another drive first so I stopped the encryption at about 4%, by closing BitLocker. I realize this is where i must have gone wrong, because i stopped the encryption algorithm as it was already started. BitLocker took awhile
to close so i assumed it reversed encrypted what it had already encrypted. I then encrypted the other drive and stored the key on the USB drive with the keys on it. According to a BitLocker policy the keys encrypt each other and become chained together, but
this may not be relevant to the issue. I resumed the encryption process of the partly encrypted USB drive and stored the key on an entirely separate and not yet encrypted USB drive and this seemed to complete with no issues. Then i encrypt the final USB drive
and stored the key on a non encrypted hard disk.
Now the problem I am having is when I attempt to unlock the USB drive with the keys on it. The drive unlocks, but then unmounts itself and asks for the password again and this ends up being an endless loop. I decide to decrypt all drives in the order i encrypted
them and there appears to be no issue except for with the USB drive with most of the keys on it. I am unable to unlock and decrypt the USB with the keys on it so i skip this drive in the process and I am able to fully decrypt the rest of the drives using the
keys stored on the "broken" encrypted drive regardless of skipping decrypting it. If I attempt to decrypt or unlock the USB drive with the keys on it I can not, so I tried rebooting. Now when I attempt to unlock the drive using the password through
the BitLocker Encryption Manager the manager seems to freeze and goes into a non responsive mode and I am unable to close it, even after safely removing the USB drive.
I have tried a few different methods to solve this issue, but fear that without manually decrypting every single bit exactly how they were encrypted the data may be lost.
I use an elevated command prompt to use the standard "manage-bde d: -unlock -pw" and then enter the password, but this seems to only unlock the drive momentarily before it unmounts itself.
I have also tried using "manage-bde d: -unlock -recoverykey '[recoverykey/path].bek'", but this shows the same behavior.
I have also tried using "repair-bde d: e: -recoverykey '[recoverykey/path].bek'" and the command prompt says "Error: Cannot open 'D:'. Check that it is not currently in use. To continue even when the volume is in use, add the -Force option.".
Not using the "-Force" parameter allows me to access the drive as if it isn't locked, but only lets me see the "COV 0000. ER" and other BitLocker ToGo autorun files, while not letting me modify or copy the "COV 0000. ER" file.
I am able to view the "COV 0000. ER" file with a hex editor, but do not want to have to screen capture every screen worth of characters to attempt to manually decrypt the entire two gigabytes of information, while still not knowing exactly what timestep
the encryption algorithm actually stopped at.
If I use "repair-bde d: e: -recoverykey '[recoverykey/path].bek'" again or use the "repair-bde d: e: -recoverykey '[recoverykey/path].bek' -force" the drive seems to respond and starts scanning for BitLocker metadata, and boot sectors.
I am then prompted "LOG INFO: 0x00000027", "Valid metadata at offset 579055616 found at scan level 1.", "LOG INFO: 0x00000028 Successfully created repair context. Beginning decryption". The "d:" USB drive is approximately
two gigabytes, while the "e:" is approximately eight gigabytes. This then does from 1% to 99% without any issues. As the decryption process hits 99%, I am prompted with a popup "repair-bde.exe - Wrong Volume", "The wrong volume is
in the drive. Please insert volume into drive \Device\Harddisk2\DR8", "Cancel: Try Again: Continue" and the encrypted USB unmounts itself again and asks for the password through the BitLocker Drive Encryption Manager. No matter which of the
three choices I select the command prompt then says "LOG ERROR: 0xc0000035 Failed to read sector at offset 2000010000. <0x00000002>" and repeats untill it hits "2015160832" and then says "Decrypting: 100% Complete. Finished decryption.
ACTION REQUIRED: Run 'chkdsk D: /f' before viewing decrypted data. Now I still have the USB drive with the keys on it, but it remains locked, but now the eight gigabyte USB drive I used as "e:" is seen as a "RAW" filesystem under "Disk
Management", but "FAT32" under "My Computer". If i try to open "e:" I am prompted to format the drive before using it. If I use "RUN" to attempt to check the disk for errors in "read-only mode" the drive
is detected as if it was the "NTFS" file format, but does not seem to have any errors.
If I choose to format the USB drive "e:" I am able to use it, but it appears blank. Using third party recovery software I am able to retrieve some of the data from the partition, which was on "d:", but it appears to be partly decrypted
still or possibly fragmented. I realize this step isn't because of BitLocker and may be due to the software used to retrieve the information.
I am able to repeat this temporarily unlocking of "d:" and attempting to recover process over and over, while still getting the same result.
Another interesting note is, when I use "manage-bde -status", when the drive is locked I can see that the encrypted drive "d:" is still protected with a password and external key. If I use "repair-bde d: e: -recoverykey '[recoverykey/path].bek"
to temporally unlock the drive and then use "manage-bde -status" the drive "d:" reads the status as "Size: 1.88 GB, BitLocker Version: None, Conversion Status: Fully Decrypted, Percentage Encrypted: 0%, ERROR: An error occurred <code
0x80070057>:, The parameter is incorrect.".
Also when the USB drive is temporally unlocked using "repair-bde d: e: -recoverykey '[recoverykey/path].bek" and I use "manage-bde d: -off" I am prompted "ERROR: An error occurred <code 0x80310008>: BitLocker Drive Encryption
is not enabled on this drive. Turn on BitLocker.". If I use "manage-bde d: -on" the USB drive is detected by BitLocker as having no name, as expected, but also "ERROR: An error occurred <code 0x8031002e>: BitLocker Drive Encryption
cannot encrypt the specified drive because an encryption key is not available. Add a key protector to encrypt this drive." If I use "manage-bde d: -on -recoverykey '[recoverykey/path].bek'" then BitLocker detects the drive, but prompts "Key
Protectors Added: ERROR: An error occurred <code 0x8031002d>: The drive encryption algorithm and key cannot be set on a previously encrypted drive. To encrypt this drive with BitLocker Drive Encryption, remove the previous encryption and then turn on
BitLocker."
If I use "manage-bde d: -protectors -disable" I am prompted "ERROR: An error occurred <code 0x8031002d>: The drive encryption algorithm and key cannot be set on a previously encrypted drive. To encrypt this drive with BitLocker Drive
Encryption, remove the previous encryption and then turn on BitLocker.", but if I use "manage-bde d: -protectors -enable" I am prompted "ERROR: An error occurred <code 0x80310001>: This drive is not encrypted.".
A review of my issue is that I have a BitLocker Encrypted USB Drive, which will not allow me to unlock it no matter how i attempt to do it. I end up with the USB drive automatically unmounting itself when I try to unlock it and this will not allow me to
decrypt it.
Thank You in advance for taking the time and consideration to fully understand and read my post. I would have went to the Microsoft professional support hotline, but it would have cost about $250.00 for me to attempt to explain this very large amount of
text that I had to proof read and edit.
I believe I have stated all the information that is relevant to the issue I am having and I would appreciate any help that would help me resolve my problem decrypting the information, without the need to manually decrypt every single bit or using an at least
128 D-Bit quantum computer, "Qumputer".
I have considered these resources already, but am willing to reconsider them if i missed something.
BitLocker Drive Encryption Overview: http://technet.microsoft.com/en-us/library/cc732774.aspx
Manage-DBE: http://technet.microsoft.com/en-us/library/ff829849.aspx
Windows BitLocker Drive Encryption Frequently Asked Questions: http://technet.microsoft.com/en-us/library/cc766200%28v=ws.10%29.aspx (I haven't completely read everything, but skimmed through for what i thought may have been relevant.)
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7): http://technet.microsoft.com/en-us/library/ee424312%28WS.10%29.aspx (This might have worked but I don't have a smart card and I didn't already have the
recovery agent set up in group policies before I started encrypting.)
Scenario 16: Using the BitLocker Repair Tool to Recover a Drive: http://technet.microsoft.com/en-us/library/ee523219%28WS.10%29.aspx

Hi,
Did you remember clear which one store in which one? It's so complex on your description.
Have you tried to recover the drive which the most key stored in it by non encrypted hard disk that stored in the USB drive key?
If it still failed, i would like to suggest you contact the professional data recovery center for help.
Note: It's not recommend you use third party software to recover. Since your data might lost because of some fault.
Karen Hu
TechNet Community Support
Sorry i tried to explain my situation as thoroughly as possible without having to take screen captures of each step of the process.
I have written down what keys were stored where, so there shouldn't be any chance of mixing up the keys. I have also attempted to recover using a different key. Possibly using a different key causes the drive to attempt to decrypt with the wrong algorithm
and actually encrypting the data even more, but this doesn't seem to be the case because it just fails and goes back into the state it was in.
Also how would one get a hold of the professional data recovery team. Them being "professionals" i would assume their services are not free, but i may be mistaken.
Also I will not attempt to use "third party software" again, but I was just getting desperate and that is why I tried it on the partition of the backup, which appears to be blank anyways. This isn't relevant to the issue at hand though.
I know encryption isn't 100% non reversible no matter how large of the keys and algorithms are, so there should always be a way to decrypt.

Is there a max number of names that can be put into Contacts

is there a max number of names that can be put into Contacts and still have the app work well?

Yes, there is. It's how many contacts your hard drive can take. So you can fill up the entire computer with nothing but contacts until your HDD/Flash has no space left. So if you have 250GB, it'd be less than if you had 500GB and you'd have more on 750GB.

Max number of chars in process message MSEL?

Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
Thanks and points available

Please make sure that you build a
multithreaded program first (check with ldd).
If anyone can tell me the maximum number of threads per process I would
really appreicate it.
Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
HTH,
-vladimir

What is the max number of hyperlinks supported in a PDF docment?

What is the max number of hyperlinks supported in a PDF docment?
How do I find out how many hyperlinks there are in a PDF document?

I don't think there's a limit to the number of links you can add to a file...
This code (taken from the reference files) will report the number of links in your file:
var numLinks=0;
for ( var p = 0; p < this.numPages; p++)
var b = this.getPageBox("Crop", p);
var l = this.getLinks(p, b);
console.println("Number of Links on page " + p +" is " + l.length);
numLinks += l.length;
console.println("Number of Links in Document is " + numLinks);

Max number of Hits Account Identification

Hi all,
we are currently having the problem in IC that when somebody try to identify an account of an BP with more that 100 related sold to parties, that no account is displayed because of the standard max number of hits 100.
I have found the path to customize this in the SPRO but this sentence in the SAP help is making me some headache:
The higher the number you enter here, the more results the system will search for, and in turn, the more performance is affected. The maximum number of hits that the system allows is 100, which is also the default value.
I understand the point of the performance, but does this mean that the performance is also affected the account identification of the other BP with less than 100 related sold to parties?
Can anybody help in this issue?
We are working on CRM 5.0.
Regards
Abosi
Edited by: Abosi_3li2 on Feb 8, 2012 11:08 AM

Hello
The bug of nothing displayed if over 100 accounts are found is solved with [SAP note 1467929|https://service.sap.com/sap/support/notes/1467929.]
The code you are referring to is:
IF bpident_profile-max_hits IS INITIAL.
max_hits = 100.
ELSE.
max_hits = bpident_profile-max_hits.
ENDIF.
It means that, if blank, 100 hits is considered. You can modify the customizing up to 255 results since that is the limit of accounts to be found.
Regards
Joaquin

"max number of thread"

We are running a java web app on a Ubuntu Oracle WebLogic server version 10.3.3.
The java web app performs long polls with open tcp socket to keep the client connection open. The clients are long polling the WebLogic at 30 seconds.
Currently we are not able to maintain stability for greater than 24 hours with approximately 200 simultaneous sessions on WebLogic server. Session to me is active client/server tcp connection. We have re-written our application to use continuations, but we are seeing ConcurrentModificationException errors in performance testing.
Is there any setting in WebLogic for “max number of thread” that can handle?
Edited by: user9316392 on Jul 8, 2010 11:07 AM

First, WebLogic since 9.0 has a self-tuning thread pool where WLS will automatically grow and shrink the number of threads based on some internal algorithms. I'm not aware of a hard limit so theoretically there is no max thread count as long as the JVM has memory and WLS thinks more threads will help. You can read up on it here:
http://www.oracle.com/technology/pub/articles/dev2arch/2006/01/workload-management.html
Practically, I wouldn't expect more than several hundred threads to be helpful.
As for your situation, how does WLS become unstable? Out of memory, out of file descriptors, errors on new requests, etc. I think you're going to have to use some JVM tools to see what happens to your JVM over time. Is there a memory leak somewhere, is it non-heap memory, etc. JRockit Mission Control is helpful if running on JRockit. If you're on Sun Hotspot, them presumably you can use some of the Hotspot tools. You'll want to compare the state of the JVM towards the beginning of your load test, but after a slight warm-up period with a snapshot after the load test has been running for a long period of time.

Max number of buffers

For fast image grabbing I wand to store images in the memory of the PC. To do this I use LL ring buffering. The max number of buffers is limited by Labview to 50. I tried to increase this by MAX >>Tools >> IMAQ (like suggested on the site) but Labview keeps setting it back to 50, also after rebooting. How can I get this to a higher value?

Hi,
Take a look at this document:
http://digital.ni.com/public.nsf/websearch/FCA602CDBC4EDCEA86256BB1005AB1F2?OpenDocument
This limit is no longer a issue in NI-IMAQ 3.0.1, (except for the NI-1408)
Met vriendelijke groet / Kind regards,
Karsten
Applications Engineer
National Instruments

Max number of orders

Hi,
I am working on ECC 6.0.
I have been trying to use the Max number of orders for a Z condition type .
The Max number of orders it is not working even after reaching the max order even after reaching the max order. If anyone has faced such an issue before kindly help.
I had set the limits for pricing in the VK11 - additional data- Max number of order But of no use.
Thanks
Manoj

hi,
pl check if the conditin update field in the condition type definition is ticked or not at V/06.
regards
sadhu kishore

Max number of simultaneous connections?

Hi everyone!
how is possible to determine in advance the max number of simultaneous connection for my FMS?
thanks!

Hi,
Like Jay had mentioned the limitation on the number of connection to server depends on the capability of your server.
You can get the maximum number of connections made to the server, number of active clients... etc details through Administration APIs.
'getServerStats' gives you the "total_connects", which is the maximum number of connections made to the server. "connected" property will return the number of active clients to your server at one point. It also has many more statistics for your reference. This api returns the overall information of the server. If you want to get the details for specific vhost, you can use getVHostStats or getActiveVHostStats. To get more details on Administration API, refer your pdf documentation on "Administration API", that gets installed in your system under "$Root\Flash Media Server\documentation\flashmediaserver_3.5_administrationAPI.pdf".
Regards,
Janaki L

Max Number of Bitlocker Encryptions

Similar Messages

Maybe you are looking for