Max Number of Clips for Batch Capture?

Is there a maximum number of clips for batch capture?
I've had two failures today - FCP quit when tackling 208 short audio clips (around 4 - 10 seconds each). No video involved at all.
Is this too many for my expensive super-whizz quad thingy?
Over 360 GB free on my Hard Drive. Could it be my power save settings?
Currently tackling 30 at a time to be safe (we'll see).
Andy
4 x 2.5 GHz G5 Power PC. 8 GB DDR2 SDRAM Mac OS X (10.4.5) FCP 5.0.4 (FC Studio)

Thanks David,
I'm inclined to agree - it would have been easier all round if I'd captured the whole tape and then made subclips. I tend to shy away from this because when I used FCE, I had problems with longer captures going out of synch.
FCP seems to be coping OK with 30 at a time but doesn't appear to like 50. I know what you mean about all the shuffling - but surely it's only like asking the Mac to do a large calculation?
I've discounted the power saving theory as it happened after I changed the prefs to 'never'.
If anyone can shed more light on this topic, I'd be really grateful.
Andy
4 x 2.5 GHz G5 Power PC. 8 GB DDR2 SDRAM Mac OS X (10.4.5) FCP 5.0.4 (FC Studio)

Similar Messages

Max Number of items for an FI document (999) has been exceded

Dear Guru's
I hav production Bom For A ( Truck) , and now when i declare the production it gives me an ERROR :-
Max Number of items for an FI document (999) has been exceded.
How i can overcome this error!!
Please help
Regards
Rahul Bhardwaj

Hi
You cant post more than 999 line items in FI document and you need to split the document if line items crosses 999. It looks your production BOM itself contains some errors. Check it. Becoz no production BOM contains such a huge materials. Splitting the BOM into sub BOM may be another option.
Srinivas

Deck pre roll settings for batch capture

Thanks in advance.
I want to set the pre-roll into FCP 5 from a DV CAM deck to 1 second for batch capturing instead of the default 4 seconds. Where is the setting for this?
Thanks again.
Craig

New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...

Recommendation for HDV vtr or camcorder for batch capture

I currently own Premiere Pro CS3 and am using the trial version for PP CS4 on a Mac. One of my biggest problems is batch capturing HDV footage with my Sony HVR-Z7U HDV Camcorder or HVR-M15AU HDV Deck. It just doesn't work properly for CS3 and was disappointed to find out it doesn't work for CS4 either (unless it's a trial version issue?). Both versions I can capture on the fly, but not a batch capture. Even the adobe website say's so. So my question is, what reasonably priced HDV camcorder or VTR can I get that is compatible (let me batch capture) with both versions? Does anybody know? Thank you.

The problem I've found when capturing from the M15 is that the deck does FF and REW at such high speed that it frequently overshoots the mark by as much as two minutes, and then ends up capturing about one minute off. I usually only discover this when I look at the captured clip and find it isn't at all what I said it was when I named it.
So I just take the clip offline and recapture. This usually works. Sometimes I will manually cue the deck up to about one minute before the "in" point, and this helps the deck/Premiere find the correct timecode.
Anyhow, that's my workaround. I have handles set at 150 frames and pre- and post-roll set to the same.
(But note this is for CS3, although I assume this part is the same with CS4.)

Inadequate preroll for batch capture

I am redigitizing footage that was accidentally trashed and I am unable to batch capture one of the clips because it starts 4 frames into the tape, so there's not enough pre-roll. How can I capture otherwise and still have the fcp project recognize that the video belongs to that clip?

recutting is pretty easy.
a- Switch on Timecode Overlay in the sequence.
b- In the Browser Color Label the clip that doesn't recapture. (Control-click on the master clip in the browser, choose Label > pick a color.) This way the problematic clips are easily identified in the sequence.
c- Recapture the clip from the point where you can. If you used a shot from the first 5 seconds of your tape in the timeline, then you'll need to recapture using Capture now, otherwise use Log and Capture. Your disk might fail again). Do NOT erase the old (offline) masterclip.
Now you can re-cut the missing parts manually, reading and typing tc. But is very easy to mistype. So I always do it like this.
1- Now find first clip to replace in the timeline. Go to it's first frame.
2- Press 'x' To set in and outpoint for the clip. *
3- Make sure you're on the inpoint (If not, press SHIFT-i)
4- Press f, to match frame to the offline masterclip. It is activated in the Viewer Window, with the pointer on the in-point.
5- Press TAB until the little position-window (top-right) is activated.
6- Copy (Press Command C)
7- Double click the new captured master clip. to load it in the viewer.
8- Again Press TAB until the little position-window (top-right) is activated.
9- Paste (Press Command-V)
10- set inpoint ("i")
11- Put the clip in the timeline using F10 and the autoselectors, or drag and drop.
12- repeat all this from point 1 for the next clip....
* Depending on the way it is cut, you sometimes need to give in- and outpoints manually (L-cuts, etc). Be aware that for outpoints you can jump to the nest cut using arrow-down key) but you need to step 1 frame back (using arrow-left key) and set the outpoint ("o")
Also on L-cut's you'll need to be a little creative by first insert a shorter clip and make it the appropriat length by dragging only the audio-part-outpoints OR the video only.
All this looks more difficult than it is. Really
All the best
Rienk

Max number of connection for adapters

Hi PI/XI Experts,
I have a WS to Proxy Syncronous scenario. I need to know how many client could consume the web service at the same time? Are there any limitation? If so what is the max. number? and where it can be changed?
There is another question that how many of the WS clients message could be processed via ABAP Proxy? It is important to transport the all the messages to ABAP Proxy at the same time as much as possible.
Kind regards,
Altuğ Bayram

Hi Raj,
Where you get this knowledge? When i do search before this message i only found about RFC adapter max connection limitations. Every server/adapter should have a maximum capacity. Maybe it is high number for WS and XI adapters but i need to know what it is. If you how can i find it please share the information.
Kind regards,
Altuğ Bayram

Maximum Number of characters for Batch

Hello MM Experts,
Please let me know if there is any way to increase the length of the field for batch number so that I can give batch numbers with more than 10 characters (which is as per Std SAP).
Is there any way to increase the same ?
Thanks,

Hello Friend
Not suggested to alter Standard field size but nothing stops you from increasing the field size.
MCHA - CHARG
Down fall to do such enhacement is if you you are not sure where all the field is refered and proper error handling is not addresed then it is a bigger aniamal to resolve issues
Regards
SE

Max number of instances for stateful session beans

Hi,
I am using OC4J 9.0.3 which is embedded in JDeveloper. I would like to set the maximum number of instances for stateful session beans. I know that the session-deployment section of the orion-ejb-jar.xml file has an attribute called max-instances, but it only works for stateless session beans. (at least it says so in the documentation and it did not work with my stateful session bean)
Anyone knows how to do it?
Thanks,
Leonardo Penha

Leonardo -- Stateful session beans do not come from a pool but are assigned 1 bean to 1 user. When the EJBs life ends the bean goes away. If what you are asking about is passivation configuraiton then that is different. We currently do not support passivation based on some count of SFSBs that exists inside the container but we will provide that capability in the next release of OC4J. (Note: When passivation occurs is mostly up to the vendors and it is not required by the J2EE 1.3 specification based on performance metrics. What is required is that when a SFSB is passivated it is done correctly and we do that.)
Thanks -- Jeff

Suggested max number of images for a PSE10 Catalog?

Hello, I have a catalog that I currently have over 132K images in. I would like to keep all the images in the same catalog as I want to be able to easily search for pictures I want. Is there a specific limit or suggested not to exceed number of objects in a catalog for PSE10? David

There is no max.

We want system not allow to extranal number in migo for batch?

Hi,
In the MIGo we activated internal number generation but system allowing to enter external number for that how we can put restrication for external number. We want system not allow to extranal number?
Regards,
Channa

Hi
Please find the below path
With respect tomovementtype 101or 105 you maintain automatic and no manul creation system no allow to external numbber
SPRO->Logistics - General->Batch Management->Creation of New Batches->Define Batch Creation for Goods Movements
Reagrds
Channa

How to set busy trigger and max number of calls for a sip phone in SRST

How is it possible to set the maximum number of calls and busy trigger for a line on a sip phone in SRST .There is no commands like dual-line or octo-line for the max-dn like under call-manager-fallback .
Sent from Cisco Technical Support iPad App

So is the answer then that there is no way for a SIP phone in SRST mode to handle multiple calls? I have a site currently failed over in SRST mode, and I have noticed that the reception phone can only handle one call at a time. If I place a second call to it I get a busy signal.

How to set the number of sockets for batch processing at runtime?

Hello all,
I need to change the execution model at runtime. I have achieved this by setting the 'ModelPath' property of the sequence file at runtime. When I set the sequence file model as batchmodel, i need to set the number of test sockets also dynamically. How can this be done? Once i set the number of sockets, i would also have to set the UUT serial number for each socket. Please help me out in solving this.
Thanks and Regards
Madhu Srinivasan.

Hi Madhu,
You can do this by inserting a sequence file callback into your main sequence and choose the ModelOptions callback. You can then use the expression step to set the "Parameters.ModelOptions.NumTestSockets" value to whatever you want. If you then use the Test UUTs execution entry point you will be prompted for serial numbers automatically. You could also use this same procedure but alter the ModelOptions callback in the process model directly, either way works just as well but I think that using a sequence file callback gives a bit more flexibility in the system.
Hope this helps,
Nick

Max Number of Connections for PeerFinder

Hi,
There is an inconsistent number for how many connections an app using peerfinder can maintain simultaneously. So, how many connections can the peerfinder app maintain simultaneously, also how many connections can you maintain using stream socket by
itself. Also, is there any special rules i must adhere to when trying to use mutiple connections.
Thanks,
ECE_Studio Man

Hi,
At windows 8.1 it is possible for a single app to connect to multiple clients (running the same app) using Wi-Fi Direct.There is no limitation on how many Wi-Fi Direct connections can be supported by PeerFinder . You can open socket connections
from one app to a peer app on multiple computers by tapping each computer.So ,you can use PeerFinder to create and browse peer computers that are running the same app within wireless range.
At windows 8.0 it is only possible to connect to one client using Wi-Fi Direct. The only exception is that is if your devices have a NFC sensor this additional connections can be created with "tap and connect".
You can refer to the link to get more information:
http://msdn.microsoft.com/en-US/library/windows/apps/hh465221
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

Max number of viewers for different types of Flash Media instances

I'm looking here, under pricing: http://www.adobe.com/products/flashmediaserver/amazonwebservices/
For each type of instance, it lists the "Simultaneous connections". If the instance I want lists "1000 RTMFP", does that mean that I can only have a maximum of 1000 people viewing my live stream at one time?* What happens to person #1001 if there are already 1000 people watching? Or, does RTMFP mean something else?
Thank you!
Edit: I am using Amazon Web Services and Amazon Cloudfront to stream my event, which use FMS.

Waldemar,
there is no reasonable limit for the amount of TestSockets. But there is of course a limiting factor: the performance of the system, mostly RAM. Running 32 TestSockets shouldn't be a problem if the sum of RAM needed for each UUT does not succeed the available RAM.
To answer your further questions, you have to learn some things about the parallel/batch model:
Those models constists of two areas, one for global management and one for each socket. The area for each socket looks a bit like the SequentialModel, but differs due to synchronization issues (report, batch synchronization, ...).
The other area calls the socket area for each socket as NewExecution, meaning a parted dataspace for each socket. Another thing you have to know: each socket executes exactly the same sequence!
So the simplest way to accomplish your task is to generate one general sequence which handles all sockets. Using if-statements and precondition, you can then asign certain functions for certain sockets. You can always get the info, which socket is currently active by reading the RunState.TestSocket.MyIndex.
Synchronization you are looking for is indeed done with the batch-synchronized section.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Max Number of records for BAPI 'BAPI_PBSRVAPS_GETDETAIL'

Hi All,
Can you suggest me the number of records to be fed to the 'BAPI_PBSRVAPS_GETDETAIL'.
I am using a few location products for 9 key figures.Whenever number of records
in selection table increases BAPI behaves in a strange way and the code written below it does not get executed.
Please guide me to get full points.
Thanks in Advance,
Chandan Dubey

Hi Uma,
    It comes out of the program after this code is executed.I have 50 location product combinations in vit_selection table.
CALL FUNCTION 'BAPI_PBSRVAPS_GETDETAIL'
    EXPORTING
      planningbook                = planning_book
      period_type                 = 'B'
      date_from                   = l_from_week
      date_to                     = l_to_week
      logical_system              = logical_system
      business_system_group       = business_system_group
    TABLES
      selection                   = vit_selection
      group_by                    = vit_group_by
      key_figure_selection        = vit_kf_selection
      time_series                 = vit_t_s
      time_series_item            = vit_t_s_i
      characteristics_combination = vit_c_c
      return                      = vit_return.
LOOP AT vit_return.

Max Number of Clips for Batch Capture?

Similar Messages

Maybe you are looking for