Max number of connection for adapters

Hi PI/XI Experts,
I have a WS to Proxy Syncronous scenario. I need to know how many client could consume the web service at the same time? Are there any limitation? If so what is the max. number? and where it can be changed?
There is another question that how many of the WS clients message could be processed via ABAP Proxy? It is important to transport the all the messages to ABAP Proxy at the same time as much as possible.
Kind regards,
Altuğ Bayram

Hi Raj,
Where you get this knowledge? When i do search before this message i only found about RFC adapter max connection limitations. Every server/adapter should have a maximum capacity. Maybe it is high number for WS and XI adapters but i need to know what it is. If you how can i find it please share the information.
Kind regards,
Altuğ Bayram

Similar Messages

Max Number of Connections for PeerFinder

Hi,
There is an inconsistent number for how many connections an app using peerfinder can maintain simultaneously. So, how many connections can the peerfinder app maintain simultaneously, also how many connections can you maintain using stream socket by
itself. Also, is there any special rules i must adhere to when trying to use mutiple connections.
Thanks,
ECE_Studio Man

Hi,
At windows 8.1 it is possible for a single app to connect to multiple clients (running the same app) using Wi-Fi Direct.There is no limitation on how many Wi-Fi Direct connections can be supported by PeerFinder . You can open socket connections
from one app to a peer app on multiple computers by tapping each computer.So ,you can use PeerFinder to create and browse peer computers that are running the same app within wireless range.
At windows 8.0 it is only possible to connect to one client using Wi-Fi Direct. The only exception is that is if your devices have a NFC sensor this additional connections can be created with "tap and connect".
You can refer to the link to get more information:
http://msdn.microsoft.com/en-US/library/windows/apps/hh465221
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

Max Number of items for an FI document (999) has been exceded

Dear Guru's
I hav production Bom For A ( Truck) , and now when i declare the production it gives me an ERROR :-
Max Number of items for an FI document (999) has been exceded.
How i can overcome this error!!
Please help
Regards
Rahul Bhardwaj

Hi
You cant post more than 999 line items in FI document and you need to split the document if line items crosses 999. It looks your production BOM itself contains some errors. Check it. Becoz no production BOM contains such a huge materials. Splitting the BOM into sub BOM may be another option.
Srinivas

LDAP "ServerListener" stops responding (Max number of connections reached)

Hi --
The last four work days, in the evening, our OAS 10G server stopped processing portal logon requests. The response to login requests was this message:
Internal error WWC-00006 Unexpected error
encountered in wwsec_app_priv.process)signon
(User-Defined Exception) (WWC-41417)
An exception was raised when accessing the
Oracle Internet Directory 81: Can't contact
LDAP server. Details:
Operation dbms_ldap.simple_bind_s (The message also included other details such as the host, port and DN, and a reference to error message WWC-41743.)
Suspecting an LDAP problem, we looked on the server, and in ORACLE_HOME/LDAP/LOG I found recent log files (oidldapd[instance]s[pid].log) with several megs of messages that look like this:
2005/06/17:17:59:33 * ServerListener :2 * ERROR :
ServerListener : Max numbers of connections reached.
Num Conns = 874, Max Conns = 874, Closing the
connection. These messages repeated, several times per minute, overnight and the next day until I restarted the server. The same thing happened again the next night.
A metalink search pointed to docid "293391.1" which, in part, suggests that the problem may be caused by improper programming, and that the solution may be to, "investigate the applications that connect to OID and where possible modify them to perform an explicit disconnect."
Does anyone have any reference to how an application can perform an explicit disconnect from the OID? We do have a relatively new application which follows the "Java API for Oracle Internet Directory" -- documention found here: http://download-west.oracle.com/docs/cd/B10501_01/network.920/a96577/oid_java.htm -- but in that document we cannot find any reference for how to "perform an explicit disconnect".
The application already calls the "context.close()" method, which according to the documentation closes the connection to the OID, but we cannot find any other "explicit disconnect". And, since the problem happens even though our app is already calling the context.close(), there must be something else.
Opened this up as a Metalink question related to Portal, but they said it's not their problem, and we should ask over here.
Any thoughts?

Looks like that's helped. While the errors persist, OID isn't dieing.
For anyone with similar problems, it looks like docid 437493.1 is useful. Upgrade clients to at least 10.2.0.3 to defeat a sqlnet problem.
Just tried it with the 10.2.0.5 patchset and it seems to be working and not generating the 104 error on the OID server.

Max number of instances for stateful session beans

Hi,
I am using OC4J 9.0.3 which is embedded in JDeveloper. I would like to set the maximum number of instances for stateful session beans. I know that the session-deployment section of the orion-ejb-jar.xml file has an attribute called max-instances, but it only works for stateless session beans. (at least it says so in the documentation and it did not work with my stateful session bean)
Anyone knows how to do it?
Thanks,
Leonardo Penha

Leonardo -- Stateful session beans do not come from a pool but are assigned 1 bean to 1 user. When the EJBs life ends the bean goes away. If what you are asking about is passivation configuraiton then that is different. We currently do not support passivation based on some count of SFSBs that exists inside the container but we will provide that capability in the next release of OC4J. (Note: When passivation occurs is mostly up to the vendors and it is not required by the J2EE 1.3 specification based on performance metrics. What is required is that when a SFSB is passivated it is done correctly and we do that.)
Thanks -- Jeff

Max Number of Clips for Batch Capture?

Is there a maximum number of clips for batch capture?
I've had two failures today - FCP quit when tackling 208 short audio clips (around 4 - 10 seconds each). No video involved at all.
Is this too many for my expensive super-whizz quad thingy?
Over 360 GB free on my Hard Drive. Could it be my power save settings?
Currently tackling 30 at a time to be safe (we'll see).
Andy
4 x 2.5 GHz G5 Power PC. 8 GB DDR2 SDRAM Mac OS X (10.4.5) FCP 5.0.4 (FC Studio)

Thanks David,
I'm inclined to agree - it would have been easier all round if I'd captured the whole tape and then made subclips. I tend to shy away from this because when I used FCE, I had problems with longer captures going out of synch.
FCP seems to be coping OK with 30 at a time but doesn't appear to like 50. I know what you mean about all the shuffling - but surely it's only like asking the Mac to do a large calculation?
I've discounted the power saving theory as it happened after I changed the prefs to 'never'.
If anyone can shed more light on this topic, I'd be really grateful.
Andy
4 x 2.5 GHz G5 Power PC. 8 GB DDR2 SDRAM Mac OS X (10.4.5) FCP 5.0.4 (FC Studio)

If an airport Extreme is combined with one or more airport expresses, what is the max number of connections? Is it just 50, or 50 plus 10 for each Express?

I would like to set up a wireless network with an Airport Extreme, plus one or more Airport Expresses to extend the range. I know an Extreme supports 50 users and an Express 10 users, but when they're combined does the number of users go up according to the number of Expresses combined with the Extreme, or is it limited at 50 no-matter how many Expresses are added?
Thanks
Steve

50 users + 10 users + 10 users + etc. I am assuming that each Express device will be connected using a wired Ethernet connection.
But, unless you have a truly fantastic Internet connection with your ISP, things are going to be mighty slow on the network since all users split up the available bandwidth.
So, if you have a 50 Mbps Internet connection, 50 users will have approximately 1 Mbps of bandwidth to work with. Few of us would consider having a 1 Mbps service in our home, even if we only had one computer....way too slow.

Max number of connections

What is the Maximum number of wireless connections to a WRT160Nv2 router? I currently have 4 wireless devices and one wired. I am trying to add another camera. If it is maxed out, what router would you recommend for 10 devices?
Thank you in advance for your help.
Rita

The router is capable of handling more wired or wireless devices, but the more device you connect to your router the more chances of getting the computers same ip address. So if you have more computers in your network its better to assign a Static IP to your computers.
To make your camera work smoothly its better to assign a Static IP to it, so that it does not get conflict in the network.

Suggested max number of images for a PSE10 Catalog?

Hello, I have a catalog that I currently have over 132K images in. I would like to keep all the images in the same catalog as I want to be able to easily search for pictures I want. Is there a specific limit or suggested not to exceed number of objects in a catalog for PSE10? David

There is no max.

How to set busy trigger and max number of calls for a sip phone in SRST

How is it possible to set the maximum number of calls and busy trigger for a line on a sip phone in SRST .There is no commands like dual-line or octo-line for the max-dn like under call-manager-fallback .
Sent from Cisco Technical Support iPad App

So is the answer then that there is no way for a SIP phone in SRST mode to handle multiple calls? I have a site currently failed over in SRST mode, and I have noticed that the reception phone can only handle one call at a time. If I place a second call to it I get a busy signal.

Max number of viewers for different types of Flash Media instances

I'm looking here, under pricing: http://www.adobe.com/products/flashmediaserver/amazonwebservices/
For each type of instance, it lists the "Simultaneous connections". If the instance I want lists "1000 RTMFP", does that mean that I can only have a maximum of 1000 people viewing my live stream at one time?* What happens to person #1001 if there are already 1000 people watching? Or, does RTMFP mean something else?
Thank you!
Edit: I am using Amazon Web Services and Amazon Cloudfront to stream my event, which use FMS.

Waldemar,
there is no reasonable limit for the amount of TestSockets. But there is of course a limiting factor: the performance of the system, mostly RAM. Running 32 TestSockets shouldn't be a problem if the sum of RAM needed for each UUT does not succeed the available RAM.
To answer your further questions, you have to learn some things about the parallel/batch model:
Those models constists of two areas, one for global management and one for each socket. The area for each socket looks a bit like the SequentialModel, but differs due to synchronization issues (report, batch synchronization, ...).
The other area calls the socket area for each socket as NewExecution, meaning a parted dataspace for each socket. Another thing you have to know: each socket executes exactly the same sequence!
So the simplest way to accomplish your task is to generate one general sequence which handles all sockets. Using if-statements and precondition, you can then asign certain functions for certain sockets. You can always get the info, which socket is currently active by reading the RunState.TestSocket.MyIndex.
Synchronization you are looking for is indeed done with the batch-synchronized section.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Max Number of records for BAPI 'BAPI_PBSRVAPS_GETDETAIL'

Hi All,
Can you suggest me the number of records to be fed to the 'BAPI_PBSRVAPS_GETDETAIL'.
I am using a few location products for 9 key figures.Whenever number of records
in selection table increases BAPI behaves in a strange way and the code written below it does not get executed.
Please guide me to get full points.
Thanks in Advance,
Chandan Dubey

Hi Uma,
    It comes out of the program after this code is executed.I have 50 location product combinations in vit_selection table.
CALL FUNCTION 'BAPI_PBSRVAPS_GETDETAIL'
    EXPORTING
      planningbook                = planning_book
      period_type                 = 'B'
      date_from                   = l_from_week
      date_to                     = l_to_week
      logical_system              = logical_system
      business_system_group       = business_system_group
    TABLES
      selection                   = vit_selection
      group_by                    = vit_group_by
      key_figure_selection        = vit_kf_selection
      time_series                 = vit_t_s
      time_series_item            = vit_t_s_i
      characteristics_combination = vit_c_c
      return                      = vit_return.
LOOP AT vit_return.

Max number of records for 'BAPI_PBSRVAPS_GETDETAIL'.

Hi All,
Can you suggest me the number of records to be fed to the 'BAPI_PBSRVAPS_GETDETAIL'.
I am using a few location products for 9 key figures.Whenever number of records
in selection table increases BAPI behaves in a strange way and the code written below it does not get executed.
Please guide me to get full points.
Thanks in Advance,
Chandan Dubey

Server memory issue !

Max number of repairs for MacBook Pro

Hi all,
I just wondering how many repairs Apple typical tries until a defect is resolved.
Are there any maximum numbers?
In my current case I had over a period of 2 month:
1) logic board replaced due to kernel panics
2) logic board and memory replaced due to kernel panics
3) display replaced due to dust below glass + logic board replaced due to unknown reason
4) AC adapter replaced - it simply died with a strong smell
5) back at repairs again due to screen flicker - probably again logic board an/or display .....
So it seams it's not going better. A solved issue raised a new one.
Are there any rankings how many things can be replaced in a MacBook how often?

Apple deals with repetitive-repair issues on a case by case basis — there are no published criteria for a decision to replace a machine rather than keep repairing it. That said, your machine's history is grim enough to warrant pretty serious consideration for replacement, I would think. But only Apple can make that decision; all we can offer here is encouragement to take the question up with Apple.
Call Customer Relations at 1-800-767-2775, explain the situation, and see what the reaction is. Have your serial number, case number(s) for previous repairs, and all relevant paperwork handy when you call. Be polite, patient, calm and persistent. Good luck.

Max number of recipients for iBots

Hi,
I'm just trying to find out the maximum number of recipients that is permitted by iBots. Please could you indicate where I can find this information?
Regards,

The limitation is defined by the database (Oracle, DB2 or SQL) that is with SAP BW/BI. If you are running BW on Oracle, I believe it is some where between 700 to 800. I do not know the exact number. I have InfoObjects that have more than 200 attributes.
thanks.
-S

Max number of connection for adapters

Similar Messages

Maybe you are looking for