Max number of devices per app

I work for a school and we have 200 ipads.  Can I purchase one app and place it on all 200.  I am assuming not, but are there restrictions?

Repost your question in the iPad in the Enterprise (Schools/Business) forum https://discussions.apple.com/community/ipad/ipad_in_the_enterprise Maybe someone from another school system will answer. Here's one link, but I'm not sure it applies to schools. http://www.idownloadblog.com/2011/08/10/apple-id-limited-10-devices/
 Cheers, Tom

Similar Messages

  • HT204053 Max number of devices on one iTunes account?

    Max number of Devices on a single iTunes account

    Devices or Computers? The former there is no limit. For the latter there is a limit of 5.

  • Max. number of WLCs per WCS

    Hi,
    I know this is a fairly basic question but I can't find answer in WCS Q&A's etc.
    I'm looking at a deployment where there will be many small sites with only 5 or 6 APs and a 2106 WLC. Each site will be in a different mobility group.
    I know WCS licensing counts APs, but is there a max. number of WLCs?
    Thanks, MH

    Hi Mark,
    The supported number of WLC's per WCS is based on the WCS Platform used :)
    Minimum server requirements
    Cisco WCS High-End Server
    • 3000 lightweight access points, 1250 standalone access points, 750 wireless LAN controllers
    • Two Intel® Xeon Dual Core CPU's; 3.0 GHz, 8 GB RAM, 200 GB HDD
    Cisco WCS Standard Server
    • 2000 lightweight access points, 1000 standalone access points, 150 wireless LAN controllers
    • Intel® Dual Core CPU; 3.2 GHz, 4 GB RAM, 80 GB HDD
    Cisco WCS Low-End Server
    • 500 lightweight access points, 200 standalone access points, 50 wireless LAN controllers
    • Intel® CPU; 3.06 GHz, 2 GB RAM, 30 GB HDD
    CiscoWorks WLSE Models 1130-19 or 1133 running Cisco WCS
    • 1500 lightweight access points, 100 wireless LAN controllers
    • Intel Pentium 4 CPU; 3 GHz, 3 GB RAM, 38 GB HDD
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd802570d0.html
    Hope this helps!
    Rob

  • Max number of VMs per free ESXi hypervisor?

    VMware Community,
    I've just installed the free ESXi 5.5 hypervisor and I'm wondering if the same virtual machine limits apply to the standalone scenario as vCenter? Can I actually run 512 VMs? What, if any, is the max number of VMs I can run on a free version of ESXi?

    As of ESXi 5.5 most limitations were removed and only an 8 vCPU limit per virtual machine remains. So unless I'm mistaken, the mentioned 512 VM per host (see http://www.vmware.com/pdf/vsphere5/r55/vsphere-55-configuration-maximums.pdf) apply to the free Hypervisor too.
    André

  • Maximum number of devices per icloud account

    I work for a University and we would like to have all of our Apple devices on one iCloud account for ease of management.  What is the maximum number of devices that can be registered on one iCloud account?
    Thanks,
    Natasha

    10 per Apple ID.

  • Throttling a file adapter to consume a max number of files per minute

    Is there a way to design a file adapter to throttle its processing bandwidth.
    A simple use case scenario is describes as follows;
    A File Adapter can only consumes a max of 5 files per minute. The producer average throughput is 3 files per minute but during peak times it can send 100 files per min. The peak times occur during end of year or quarterly accounting periods. If the consumer consumes more than 5 files per min the integrity of the environment and data is compromised.
    The SLA for the adapter is to :
    - Each file will be processed within 2 seconds.
    - Maximum File Transactions Per minute is 5
    An example is as follows.
    The producer sends 20 files to its staging directory within a minute. The consumer only processes 5 of these files in the first minute, sleeps then wakes up to consume the next 5 files in the second minute. This process is repeated until all files are processed.
    The producer can send another batch of files when ever it likes. So in the second minute the producer can send another 70 files. The consumer will throttle the files so it only processes 5 of these files every minute.

    Hi,
    If you have a polling frequency set to 2 secs..then controlling it to read only five files a min is difficult.?You can have the polling frequecy changed to 12secs
    or u can schedule a BPEL for every min and use synchronous read operation and loop it 5 times to read 5 files.

  • Max Number of threads per Process in Solaris 8

    I'm running into qpplication which crashes with a segfault when the LWP for that process hits about 255, i'm trying to find the maximum number of threads per process using sysconf and its returning -1
    #include <unistd.h>
    int
    main(void)
    printf("%ld\n",sysconf(_SC_THREAD_THREADS_MAX));
    return 0;
    I'm using gcc 3.3.2
    If anyone can tell me the maximum number of threads per process I would really appreicate it.
    Also the maximum number of open files per process.
    Thanks in advance
    - Rodrick Brown
    - DoITT

    Please make sure that you build a
    multithreaded program first (check with ldd).
    If anyone can tell me the maximum number of threads per process I would
    really appreicate it.
    Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
    64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
    Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
    HTH,
    -vladimir

  • Max number of agents per proxy

    Is there a suggested maximum number of agents per proxy, especially a proxy co-located with the enterprise controller?
    Thanks,
    Tim Reidy

    This would depend on usage patterns and what type of hardware the proxy controller is running.
    According to some whitepapers I have you're looking at :
    For only hardware management - 5000 systems per enterprise controller, 1000 systems per proxy controller
    For hardware, OS, update and virtualization - 3000 systems per enterprise controller, 1000 systems per proxy controller
    hardware specs are:
    Sparc T3's, 16-core T3 processor, 32 GB RAM for the EC, 16 GB RAM for ProxyController
    Intel, Sun Fire x4270's, 2 x Quad-core Nehalem processors, 36 GB RAM for EC, 8 GB RAM for ProxyController

  • Maximum Number of Devices per User

    Hello,
    I've set the Maximum Devices Per User to 1 ... and some users can connect two devices to the Mobility system !!?
    Any ideas ?
    Regards
    Olivier

    olidub wrote:
    > I've set the Maximum Devices Per User to 1 ... and some users can
    > connect two devices to the Mobility system !!?
    After you enable this setting, if users have existing devices they can
    continue to use them but won't be able to add any more. Users who only
    have one device currently shouldn't be able to add a second though.
    Your world is on the move. http://www.novell.com/mobility/
    We know what your world looks like. http://www.novell.com/yourworld/

  • What is the maximum number of devices that can be added to a icloud account? ie Does 'Find my iphone' have a max number of devices?

    I have over 50 iphone logged in with the same compant account to keep track of them, some of them are not showing anymore, including new devices, have I maxed out the ammount of devices I can associate with this feature?

    The answer to this question is 100.
    You can have 100 devices on a single iCloud account.

  • Trickles connection; max number of clinet per server; more services

    Dear,
    I found on web something about Trickles connection. Is there some further reading about Trickles connection in Java? Is that just logical concept or it is language-oriented implementation? If it is only logical concept, I suppose it is equal to TCP connection on client side and UDP connection on server side, of course if that is possibly? Can anyone tell me something more about that? Thank you.
    If I am using stateful connection between server and client, what is average number of client which server can serve - you can specify some PC configuration and give number which depends on that PC? Thank you.
    If somewhere are more services which should communicate, but they are on a same PC (suppose all are written in Java). What is the best way of communication between themselves?
    If you can, recommend me some very good book which can give me at least one answer on my questions. It is better, if book is available as e-book.

    It's not supported in Java so you're asking in the wrong place.

  • BPC MS 7.0 ; Is there a guideline for max. no. of dimensions per app?

    I need to know if there is guideline for maxumum no. of dimensions per application? i have been hearing that there should be 8 to 11 dimensions per application? Is this SAP recommended? or is this a best practice?

    Hi Sudhir,
    As per Nilanjan's reply below, the maximum dimension per application is 20.
    But, the more dimension you create in the application, the higher the effort to maintain it, i.e. when creating input templates/ reports, etc. So, define your dimension carefully.
    Regards,
    Liam

  • Max number of instances per Server

    Good morning,
    I've installed Oracle9i in a Windows 2000 Server with 1GB of memory. After that I've created several instances of Oracle DB. With 3 instances my server works acceptably, but after adding two mor instances I've begun to have some perfomance problems and the access speed has considerably decreased, so my question is, what is the maximum number of instances that the same Oracle server can support in order to optimize the access to the DB?
    Thanks in advance.
    Isabel

    Hi,
    I am confronted with a similar problem. ie, we have got several instances on the basis of one application/one instance. I am asked to regroup all these instances to one and only one instance containing several schemas to reduce the number of servers, number of instances and on the way reduce the administrative ( dba ) tasks. As i have got some knowledge of dba, I thought of installing this instance under Oracle 10g like this : an application on its own tablespace and the backup of this tbs via rman. So when an application crashes, I can make use of TSPITR to bring the database to its initial ( stable ) status. My questions are :
    1° any re-initialisation of the database will sanction all the schemas. Is there any
    way to avoid this ?
    2° as different tablespaces be brought to a consistency status different in time via
    TSPITR even if the controlfile happens to be the same ?
    3° if I opt for UNDO management AUTO, there can be only one UNDO TBS
    active at a time. As this won't render me to trouble when i need to recover
    only one application ? or on performance ?
    Any prompt reply will be greatly appreciated.
    Best regards.
    Tiroumalai

  • Cisco 781 max number of devices

    Hello:)
    our office in japan has a fiber 1gigabit line from our internet company
    and we have about 17 people in our office.
    we have many devices hooked up to our switch
    2 printers,  3 oscilloscopes,  4 laptops and about 20 computers.
    and have 3 ip phones that share 2 channels.
    we do not use that much internet
    some of us surf the net and check emails
    we just do not want any downtime
    which router should i order?
    im thinking the 781 will be good
    thank you in advance

    Hello,
    Could you give some details on your connection?
    Is it a metro ethernet connection?
    Does the fiber line connect directly to the switch?
    What switch are you using?
    Are you able to access the internet currently.
    What equipment does your service provider supply to you?
    Is this connection directly to the service provider or is it connecting to another office, such as a headquarters office?
    I believe you are referring to the 871 router am I correct?
    The 871 would not handle the full bandwidth of the 1 Gigabit connection.
    Mark

  • Limit on devices per user that can connect to Office Mobile or Office for iPad apps?

    We are are on an E3 license for Office 365. What is the maximum number of devices that a user can connect to the various mobile apps? I had hard 5 was the max, but can not find any documentation to support this. We are interested in using both Office Mobile
    and the new Office for iPad apps and want to understand any restrictions at the user level. Thanks.

    Hi,
    You are correct 5 devices max per user, these devices could be a PC/Tablet/Phone etc... (they all count as a device)
    see the second row on this page http://office.microsoft.com/en-gb/business/compare-all-office-365-for-business-plans-FX104051403.aspx
    Daniel

Maybe you are looking for

  • On Macbook Pro 13" Retina new pricing

    Hey guys... This can might as well be a far cry, but I will ask it anyway. With the new pricing of several Macbooks as announced by Apple last week, does anyone here know of any plans or incentives Apple gives to those who bought the rMBP13 when it w

  • TS3196 i have installed windows 7 on my macbook pro with retina display but the internet won't work in Windows, please help!!

    I have the latest 13" Macbook Pro with Retina Display. I just recently installed Windows 7 through Bootcamp assistant but when I am in Windows the internet doesn't work. How can I fix this??

  • Just started Livecycle yesterday. Need help with Javascripting

    I'm new to scripting in general, but have figured out enough to be dangerous in Acrobat. Unfortunately, Acrobat no longer fulfills the need I have for dynamic forms and I have started trying to figure out Livecycle. Is the scripting in Livecycle THAT

  • Reg:URL in 10g

    Hi, we are facing an issue with the URL. Let me explain the problem, we are invoking web.show_document('URL', '_blank') from forms 10g. In the URL being generated we are concatenating the servername within the URL. In Dev, the server name turns autom

  • Reading content from PDF to XI

    Hi All, Can I know about, is XI capable of reading the content from PDF. As I came to know that we can achieve this with the adapter module can you please ignite me how to do for this or is there any other option other than this way or show me if alr