Max number of Netrestore clients?

Hi,
I am using the Netrestore feature in 10.6.3 system image utility to deploy a standardized image to about 18 clients. I have been able to successfully restore the image to all of the clients, however I had to do it in two separate deployments.
The first time I booted all of them to the Netrestore only about 10 of them actually made it to the installer. The other machines just sat at the grey Apple screen. Once the others finished I was able to get the others to boot and restore.
I am running a basic network configuration, with an Airport Extreme providing DHCP and a number of gigabit switches with cat 6 running the client machines.
Is there a setting I'm missing? It would seem to me that I should be able to restore this relatively small number of clients at the same time.

top

Similar Messages

  • Is there a max number of iCloud clients

    iCloud supports my iPhones and Windows 8.1 calendars, but structurally discards my iPad. Is there a max number of iCloud clients ina network?

    Hallo James, It seems that your suggestion did work! The sync, however, came much later than those on the smart phones. I reentered my Apple password and turned the iPad calendar iCloud button OFF and ON and after, say, half an hour I got missing calendar items on the iPad.
    10 Points for you! Thanks.

  • 1252 - Max Number of Clients

    I have customer that is looking at deploying 1252 access points. I was wondering what the maximum number of clients that can associate to a single 1252. Does this count differ between 1252s running autonomous and LWAPP? The proposed configuration is using B/G radios at 54Mbps but quoting the A/B/G model for future 802.11n deployment (5Ghz radios would be turned off for now).
    Any information would be greatly appreciated.
    Thx
    Joe

    Its not as simple as the max number of clients but you also have to consider the type of client. Also food RF deisign and survey are critical to maximising client throughput.
    There are rules for existing aps of approx 20-25 max for data. This would be 7 for voice in mixed mode b/g or 14 for g only and 20 for a only.
    The ap can theoretically support many more clients, I think the figure is 256. With very simplistic data transfer such as bar code scanning I have seen as may as 50 clients with no issues.
    As you ar lookig at abg these figures seem realistic.
    With 802.11n you hav more bandwith available, better utilisation of the spectrum and therefore more client but its about being realistic and looking at what you are trying to connect.
    Streaming multimedia would be lower than data only. Data only I would say 50 clients no issues but thats quite a density considering the RF footprint. For voice you are stuck with the above figures as you are still only dealing with abg clients.
    Hope that helps

  • "max number of thread"

    We are running a java web app on a Ubuntu Oracle WebLogic server version 10.3.3.
    The java web app performs long polls with open tcp socket to keep the client connection open. The clients are long polling the WebLogic at 30 seconds.
    Currently we are not able to maintain stability for greater than 24 hours with approximately 200 simultaneous sessions on WebLogic server. Session to me is active client/server tcp connection. We have re-written our application to use continuations, but we are seeing ConcurrentModificationException errors in performance testing.
    Is there any setting in WebLogic for “max number of thread” that can handle?
    Edited by: user9316392 on Jul 8, 2010 11:07 AM

    First, WebLogic since 9.0 has a self-tuning thread pool where WLS will automatically grow and shrink the number of threads based on some internal algorithms. I'm not aware of a hard limit so theoretically there is no max thread count as long as the JVM has memory and WLS thinks more threads will help. You can read up on it here:
    http://www.oracle.com/technology/pub/articles/dev2arch/2006/01/workload-management.html
    Practically, I wouldn't expect more than several hundred threads to be helpful.
    As for your situation, how does WLS become unstable? Out of memory, out of file descriptors, errors on new requests, etc. I think you're going to have to use some JVM tools to see what happens to your JVM over time. Is there a memory leak somewhere, is it non-heap memory, etc. JRockit Mission Control is helpful if running on JRockit. If you're on Sun Hotspot, them presumably you can use some of the Hotspot tools. You'll want to compare the state of the JVM towards the beginning of your load test, but after a slight warm-up period with a snapshot after the load test has been running for a long period of time.

  • Max number of simultaneous connections?

    Hi everyone!
    how is possible to determine in advance the max number of simultaneous connection for my FMS?
    thanks!

    Hi,
    Like Jay had mentioned the limitation on the number of connection to server depends on the capability of your server.
    You can get the maximum number of connections made to the server, number of active clients... etc details through Administration APIs.
    'getServerStats' gives you the "total_connects", which is the maximum number of connections made to the server. "connected" property will return the number of active clients to your server at one point. It also has many more statistics for your reference. This api returns the overall information of the server. If you want to get the details for specific vhost, you can use getVHostStats or getActiveVHostStats. To get more details on Administration API, refer your pdf documentation on "Administration API", that gets installed in your system under "$Root\Flash Media Server\documentation\flashmediaserver_3.5_administrationAPI.pdf".
    Regards,
    Janaki L

  • Real-time 8.6 Remote panel connection exceeds max number of licenses- with no connection​s

    I've been using the remote panel right along with no problems to connect to my Compact Fieldpoint.  This morning I accidently opened the connection twice on the same computer and tripped the "Remote panel connection exceeds max number of licenses" error.  Now it will not let me connect anymore from my computer.  I've tried clearing cookies, cache and history in Internet Explorer and rebooting my computer.  I've fired up the Remote Panel Connection Manager which shows no connections, and the NI License Information window does not show any connections which have been denied due to max # of clients being exceeded.  Is there a way to reset this without having to reboot my RT controller?  I'm running RT8.6 and LV 8.6 Full Dev System and understanding that it should come with 1 remote panel license. 
    Thanks
    maat
    LV2014

    The boss wanted to see an updated feature, so I was forced to deploy a new version and reboot.  Problem went away as I suspected it would. 
    I did manage to make the same mistake again this morning (launch the remote panel in 2 different MSIE windows) and after closing them both I could reconnect.  Must be a glitch or a bug?  It'd be interesting to see if anyone else has this problem.  For now...solved, but it would be nice to see a way to fix this without rebooting.
    Message Edited by maat on 10-22-2008 10:10 AM
    maat
    LV2014

  • Is a subquery in a BO report limited to a max number of records???

    Here's my problem:
    I recieved an excel sheet with 700 records of customers from a client who wants me to to create a report with specific data for these customers in my Business Objects universe (BO6.5 on SQL Server).
    So I created a dataprovider with query 1, i.e. the requested data of customers. Then I created a second dataprovider, query 2, based on 'personal files', i.e. the excel sheet. In query 1 I added to the conditions that each customer should be in (sub)query 2 (CustomerId In list of the query result ('query2.CustomerId').
    the syntax I have used for this seems OK.
    However, I recieve the following error: "Too many selected values (LOV0001)". I know this error has to do with parameter MAX_INLIST_VALUES, which is limited by default to 99 and can be extended to 256 max. But I thought it refers to the max number of items in lists of values.
    When I limit the number of records in the excel sheet to 99 the result is perfect (proof that I got the syntax right!). I can upgrade the parameter to 256, and can split the excel sheet into three, but that will not be useful when next time my client sends me 10.000 customer records.
    Can I make reports in BO which use subqueries that result in more than 256 records at all? (hardly imaginable).
    What is the best way to do this?
    Thanks in advance!

    Hi Lucas,
    Following is the information regarding the issue you are getting and might help you to resolve the issue.
    ADAPT00519195- Too many selected values (LOV0001) - Select Query Result operand
    For XIR2 Fixed Details-Rejected as this is by design
    I have found that this is a limitation by design and when the values exceed 18000 we get this error in BO.
    There is no fix for this issue, as itu2019s by design. The product always behaved in this manner.
    Also an ER (ADAPT00754295) for this issue has already been raised.
    Unfortunately, we cannot confirm if and when this Enhancement Request will be taken on by the developers.
    A dedicated team reviews all ERs on a regular basis for technical and commercial feasibility and whether or not the functionality is consistent with our product direction. Unfortunately we cannot presently advise on a timeframe for the inclusion of any ER to our product suite.
    The product group will then review the request and determine whether or not the functionality/feature will be included in a future release.
    Currently I can only suggest that you check the release notes in the ReadMe documents of future service packs, as it will be listed there once the ER has been included
    The only workaround which I can suggest for now is:
    Workaround 1:
    Test the issue by keep the value of MAX_Inlist_values parameter to 256 on designer level.
    Workaround 2:
    The best solution is to combine 'n' queries via a UNION. You should first highlight the first 99 or so entries from the LOV list box and then combine this query with a second one that selects the remaining LOV choices.
    Using UNION between queries; which is the only possible workaround
    Please do let me know if you have any queries related to the same.
    Regards,
    Sarbhjeet Kaur

  • Planning Layout error K9162 - max number of columns in planning layout rest

    Hello collegues,
    our client would like to have 34 columns in planning layout costs activity inputs of TA KP67. But error message K9162 - max. number of columns is restricted to 30. So I tried to switch of the message with TA OBA5 application area K9 - msg number 162. But this does not work as the error comes up again even though the message is switched off.
    Do you have some ideas?
    Thanks and regards,
    Christian

    Hello,
    thanks for your response. I have maintaine in OBMSG:
    K9     162     WE     E    switch off selected
    then in OBA5 for dialog and batch I have maintained  -
    but the error is upcoming again. So I think that this sort of message cannot be switched off as the planning layout is restricted to 30 columns by design maybe?
    thanks and regards,
    Christian

  • Max number of connection for adapters

    Hi PI/XI Experts,
    I have a WS to Proxy Syncronous scenario. I need to know how many client could consume the web service at the same time? Are there any limitation? If so what is the max. number? and where it can be changed?
    There is another question that how many of the WS clients message could be processed via ABAP Proxy? It is important to transport the all the messages to ABAP Proxy at the same time as much as possible.
    Kind regards,
    Altuğ Bayram

    Hi Raj,
    Where you get this knowledge? When i do search before this message i only found about RFC adapter max connection limitations. Every server/adapter should have a maximum capacity. Maybe it is high number for WS and XI adapters but i need to know what it is. If you how can i find it please share the information.
    Kind regards,
    Altuğ Bayram

  • Max Number of Filters in SM19

    All,
    I was setting up the audit profile for firefighter ids numbering more than 50 and came to know that the max number of slots available are only 10 , controlled by profile parameter rsau/selection_slots  . Is it possible to increase the max valu of this profile .
    my client does not want to activate audit logs for all users rather just for specified number of firefighter ids .
    What would be the best practices here. Is there a workaround ?
    Best Regards,
    Vishal Padiyar

    The problem is not the number of slots, but rather the number of users for whom there is one slot per user.
    You can solve the problem using param rsau/user_selection, but you must first verify that it is OK for SAP* to become all users who's names start with SAP.
    Cheers,
    Julius

  • HT204053 Max number of devices on one iTunes account?

    Max number of Devices on a single iTunes account

    Devices or Computers? The former there is no limit. For the latter there is a limit of 5.

  • Is there a max number of names that can be put into Contacts

    is there a max number of names that can be put into Contacts and still have the app work well?

    Yes, there is. It's how many contacts your hard drive can take. So you can fill up the entire computer with nothing but contacts until your HDD/Flash has no space left. So if you have 250GB, it'd be less than if you had 500GB and you'd have more on 750GB.

  • Max number of chars in process message MSEL?

    Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
    Thanks and points available

    Please make sure that you build a
    multithreaded program first (check with ldd).
    If anyone can tell me the maximum number of threads per process I would
    really appreicate it.
    Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
    64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
    Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
    HTH,
    -vladimir

  • What is the max number of hyperlinks supported in a PDF docment?

    What is the max number of hyperlinks supported in a PDF docment?
    How do I find out how many hyperlinks there are in a PDF document?

    I don't think there's a limit to the number of links you can add to a file...
    This code (taken from the reference files) will report the number of links in your file:
    var numLinks=0;
    for ( var p = 0; p < this.numPages; p++)
    var b = this.getPageBox("Crop", p);
    var l = this.getLinks(p, b);
    console.println("Number of Links on page " + p +" is " + l.length);
    numLinks += l.length;
    console.println("Number of Links in Document is " + numLinks);

  • Max number of Hits Account Identification

    Hi all,
    we are currently having the problem in IC that when somebody try to identify an account of an BP with more that 100 related sold to parties, that no account is displayed because of the standard max number of hits 100.
    I have found the path to customize this in the SPRO but this sentence in the SAP help is making me some headache:
    The higher the number you enter here, the more results the system will search for, and in turn, the more performance is affected. The maximum number of hits that the system allows is 100, which is also the default value.
    I understand the point of the performance, but does this mean that the performance is also affected the account identification of the other BP with less than 100 related sold to parties?
    Can anybody help in this issue?
    We are working on CRM 5.0.
    Regards
    Abosi
    Edited by: Abosi_3li2 on Feb 8, 2012 11:08 AM

    Hello
    The bug of nothing displayed if over 100 accounts are found is solved with [SAP note 1467929|https://service.sap.com/sap/support/notes/1467929.]
    The code you are referring to is:
    IF bpident_profile-max_hits IS INITIAL.
    max_hits = 100.
    ELSE.
    max_hits = bpident_profile-max_hits.
    ENDIF.
    It means that, if blank, 100 hits is considered. You can modify the customizing up to 255 results since that is the limit of accounts to be found.
    Regards
    Joaquin

Maybe you are looking for