Max number of pages in a spool

Hi Gurus,
I have a background job which takes an input file from app server.Input file has 50000 records.I need to process them inside the program and display the result in spool.Now,my question is ,will I be able to see all the records.is there any upper limit for no.of pages that gets generated in the spool.

Usally no limit for max number of pages ( There may be a system setting for it). But when you scroll down, it does not display all the data. You can either click on the button Settings and choose last 10 pages or click on last page button and that will display till the end.

Similar Messages

How to restrict max. no. of pages in SP01 spool display ? e.g. to max. 40 pages

Sometimes users open very large spools displaying thousands of pages.
We want to restrict maximum number of pages that can be displayed in SP01 , e.g. up to 40 pages.
We do not want to restrict size of spool.
Users should be able to create spools of any number of pages but should be able to display only up to to 40 pages.
Any idea how this can be done?

Hi,
I'm not sure if this is just for printing or applies to page output but have a look at S_SPO_PAGE + param rspo/auth/pagelimit = 1
https://help.sap.com/saphelp_nw04/helpdata/en/c7/58c902e5bf11d18e2b0000e83dd9fc/content.htm

Number of pages in new spool request

Hello.
I use FM RSPO_RETURN_ABAP_SPOOLJOB to extract lines from a given spool. Then I open a new spool with FM RSPO_SR_OPEN. Each line of the table coming out of RSPO_RETURN_ABAP_SPOOLJOB is written to the new spool. Afterwards i close the new spool with FM RSPO_SR_CLOSE.
So far so good. This works fine.
My problem is that when i take a look into transaction SP01 the old spool has a certain number of pages. SP01 maintains that the new spool has 0 pages.
How does that come? How can I solve this?
Thx in advance
Mike

Thank you all.
My problem was that during the process of data extraction (old spool -> internal table) the NEW-PAGE-tags are deleted or at least they were not transferred into the table. And so the could not have been written into the new spool.
Solution:
Every 65 lines, that are written into the new spool request, I call RSPO_SR_PAGE_BREAK.
Thank you anyway.
MIKE

Max number of pages within an application

Hi Gurus,
Does somebody know if there is a limitation in term of number of pages within an application ?
Thks in advance.
Thierry

We have apps with several hundred pages (I think 350 is the most we have in a single app). I think the real issue is how many total pages you have (all apps, all workspaces) as this could theoretically cause performance issues. Fortunately, the nice folks at Oracle have a real world scenario that will continue to outpace just about anything else--the hosted ApEx environment. It has thousands of workspaces with an incredible total number of pages. I have not experienced any issue with that environment, so I think the rest of us are quite safe.
Anton

Max number of Pages / States!?

I am at 20 Pages/States and I am no longer able to Duplicate or Create a New Blank State.
Someone please tell me there is a workaround for this.... (can I export part as an SWF file and incorporate it back into my Catalyst file?)

Hi Raytron,
There is no way to remove the limit, and it's there for a good reason - to prevent Catalyst (and your finished application) from running slowly.
Check out Ty's recommendation on what to do if you need a lot of states:
http://forums.adobe.com/message/2154082#2154082
-Adam

How to find Number of pages in a particular spool.

Hi,
Can any one tell me in which table - table field the number of pages in the spool are stored.
There is a requirement that the list be sorted as per the number of pages present in the spool.
Help. Points will be rewarded.
Vinod.

Vinod,
Use this FM RSPO_GET_PAGES_SPOOLJOB.
for more on spools check out this onlinehelp
http://help.sap.com/saphelp_nw2004s/helpdata/en/d9/4a8efb51ea11d189570000e829fbbd/frameset.htm
Regards,
Satish
Message was edited by:
Satish Panakala

Max Number of apps allowed on the phone

I heard some where that the max number of pages is 9. So, if you download a bunch of free apps and some paid apps, where does the apps go after 9 pages? I wish the next update from apple includes a filing tool. It would be nice to put apps in a folder in a similar catagory in the app store. For examples, all games in the game folder.

It will slow down the backups when you sync. Having lots of apps will not slow down the iPhone, since only one app can run at a time, and the size of the apps are tiny - most are less than 1 MB (i.e. you would be hard-pressed to come anywhere close to filling your iPhone with apps).

How many number of pages can be included in a single spool request

Hi ,
How many maximum number of pages can be included in a single spool request. can we increase or decrease these max no of pages per spool in SAP.Please advise.
Thanks & Regards,
Sam.

Hi Sam,
The spool is ultimately a file created in the database. So it can handle a large number of pages.
By defaut it shows only first ten pages.. This can be changed from the settings in SP01.
GOTO> DISPLAY REQUESTS> SETTINGS
Regs,
Sameer

Infoview Set the number of objects (max.) per page

Is there a way to set this preference "Set the number of objects (max.) per page" using infoview web.xml or any using any BO Java SDK. Please advice.
I want to set the value using some cofiguration or using java SDK. please advice.

Hi
There is:
Log in to InfoView -> Preferences -> Set the number of objects (max.) per page:
This is per user
Kind Regards
Roland Hoeller

How can I get a report with total number of pages printed on my HP Officejet Pro 8610?

Since knowing the number of pages I print is so critical to a choice of using the "HP Instant Ink Plan" or not, how can I find the total number of pages I have printed on my brand-new (installed 2 days ago) 8610? And if I can, is it a "resettable" or rolling total? Don't see anything in user guide and a search yields nothing usable on this blog.
Printer is installed wirelessly on an older PC with Windows XP SP3. I can also of course intstall it with network cable but so far it works OK on my home network without network cable. If it matters which OS, I also have a Lenovo laptop running Vista on which I can install this printer.
Please do not respond that I can find the total by counting the number of pieces of paper I have. Surely the internals of this fine machine must have the requested data so that HP can tell my usage if I select the monthly ink plan!
This 8610 was a good buy (net $89.00 after trade-in of my six year old J36xx Deskjet) at Office Depot/Max which of course influenced my decision to buy it. So far I am very happy with printing qualities and speed, have not tried the scanner yet and will probably never use the fax since I have no land line phone.
Thanks,
Harry
This question was solved.
View Solution.

Hi,
Section #2 of the Printer Ststus report will tell you. Please try:
Printer status report
Use the printer status report to view current printer information and ink cartridge status. Also use the printer status report to help you troubleshoot problems with the printer.
The printer status report also contains a log of recent events.
If you need to call HP, it is often useful to print the printer status report before calling.
To print the Printer Status Report
1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup.
2. Touch Print Reports and then touch Printer Status Report.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Prevent Occurence of list header and page breaks in spool file of ALV Grid

Prevent Occurence of list header and page breaks in spool file of ALV Grid Display.
When we run the ALV in background and create spool request then:
Spool file output is coming like this.
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
But the required is like this
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
Please suggest a posible answer

Hello all,
if you have not yet solved this on your own, here is my solution: use a format type that has 60000 lines per page for your spool output device.
It all depends on the format type that was used for creating the spool output.
By default (in our system), we have 65 lines per page. And after each page the column headings of the ALV will appear.
What i did:
create a new format type via transaction SPAD->full administration->device types->format types (copy an existing one)
change"Number of Rows" to 60000 or something applicable
edit the device type of your output device (e.g. LOCL) to contain the newly created format type (via SPAD; Button "Formats" in device type maintenance).
That's it! Be sure to use this format type for your output device in the "Background Print Parameters" window (-> Button "Properties").
Regards
Daniel Klein
All other parameters you discussed before didn't do it. All ALV-Settings will be overwritten by the output device settings and its print properties.

How do I modify the "Number of Pages" setting for an existing Master Page via javascript?

I'm learning javascripting for InDesign and I have been tinkering with the stock scripts in the tutorials. I'm developing the ability set properties and such, playing with how Javascript works, and I wanted to change the number of pages in a master page as part of an exercise. Does anyone know how to do this? I have been able to add new masters, controlling the number of pages in them with this:
myDocument.masterSpreads.add( {pagesPerSpread:2,} )
but what I really want is to modify the master that InDesign automatically generates with a new document, to have 2 pages. Granted, I can just start off with a document with facing pages, but I don't really see the fun in that...

Jump_Over wrote:
Hi,
check this:
var mSpread = app.activeDocument.masterSpreads[0],
count = mSpread.pages.length,
mSet = 2,
run = mSet - count;
// to avoid 0-page error
mSet = Math.max(mSet,1);
if (run > 0) {
          while (run --)
          mSpread.pages.add();
else while (run) {
          mSpread.pages[-1].remove();
          run ++
edit the variable mSet to modify pages length
Jarek
Message was edited by: Jump_Over I added Math.max filter to avoid errors
Thanks, this is exactly what I wanted. Well, almost. I wish there were a way to simply set the number of pages in a master spread to a specific number the same way there is in the interface, but this will work just as well.

Maximum number of pages in Smartforms/Sapscript

Hi
I have to print some very large invoices (between 1000 and 3000 pages) and it does not work with Adobe forms.
So I would like to know approximately the maximum number of pages that it is possible to print in Smartforms and Sapscript. And then if possible migrate my form.
Thanks for your answers
Julien

Hi Julien,
There is only a max page number assigned to a user profile, that means
you can restrict the max page number per user and printer.
There is a possibility to restrict the maximum number of pages printed
as described in Section '2.4 Output authorizations' of the following
SAP Note: 119147.
Using authorization object S_SPO_PAGE, you can define that users may
only print a certain page number range on certain devices.
To activate these checks the parameter: rspo/auth/pagelimit must be
set to 1 and you have to define an interval with leading 0s as described
in the Note.
Regards,
David

What is the max number of hyperlinks supported in a PDF docment?

What is the max number of hyperlinks supported in a PDF docment?
How do I find out how many hyperlinks there are in a PDF document?

I don't think there's a limit to the number of links you can add to a file...
This code (taken from the reference files) will report the number of links in your file:
var numLinks=0;
for ( var p = 0; p < this.numPages; p++)
var b = this.getPageBox("Crop", p);
var l = this.getLinks(p, b);
console.println("Number of Links on page " + p +" is " + l.length);
numLinks += l.length;
console.println("Number of Links in Document is " + numLinks);

Max number of items exceeded?

I am trying to develop a questionaire like application. Most of the logic is stored inside pl/sql functions (that is retrieving the previous or next question with possible answers and answer-types, like, eg. radiogroup, select-list, textarea, ...) while all of the questions and respective possible answers are kept inside a collection. In processing the answers after submit I store given answers inside the same collection, basically by nullifying all possibly previously given answers for the current question and then looping through eg, g_f01.count to refill. The entire application remains on the same page, showing eg., in one 'frame', one or two questions with say 7 checkboxes and two textareas.
Everything seems to work fine, I can go forward and backward and will find new questions or ones that already have been answerd, but!!...
after the 50st item (answer), that is after I reached the 50st radiogroup, checkbox or textarea, new checkboxes or radiogroups even though shown the resulting values will not be stored inside the collection anymore.
generating the page i use:
htp.prn(apex_item.radiogroup(p_idx => 1, p_value => c2.a_id, p_selected_value => c2.qa_id, p_attributes => 'id="P2_QUEST_' || i || '"'));
and in processing correspondingly ...
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
FOR c2 IN
(SELECT seq_id,
c001 q_id,
c002 a_id,
c012 qa_id
FROM apex_collections
WHERE c001 = to_char(p_q_id)
AND collection_name = 'ANSWERS'
AND c002 = apex_application.g_f01(i))
LOOP
apex_collection.update_member_attribute(p_collection_name =>
'ANSWERS', p_seq => c2.seq_id, p_attr_number => '12',
p_attr_value => c2.a_id);
END LOOP;
END LOOP;
to me I only use f01 ... f04 say, ... Is it possible that I still hit the max of 50 page-items?
Regards
j.

max number of items exceeded?

Max number of pages in a spool

Similar Messages

Maybe you are looking for