Max number of retries of error message in integration engine

Hi,
I have a scenario which is generating lot of email alerts if goes in error in SXMB_MONI....
so then i ticked the " suppress multiple alert " checkbox.....but because of this unless i complete one alert in the alert inbox another alert does not come ( considering that 1 alert comes and then after 5 hrs another error occurs for that same interface then that alert will not come unless we clear the previous alert from the alert inbox )
My requirement is everytime that interface goes in error EXACTLY 1 email alert should be generated

Hi,
After you configure the email alerts (without Suppers Multiple values) For every error you can get one email. For example one customer sends data that is failed due to Error "A" at this time you will get an email alert, again other message failed due to error "A" then you will get another email, means for the same error type you are getting multiple emails, to avoid this we can use Suppers Multiple alerts option.
In this case Mail doesn't comes to Alert Inbox also.
Regards,
Venkata Ramesh

Similar Messages

Error while testing message from Integration Engine.

Hi,
Trying to send message to Integration engine from RWB, using test mesage tab in Integration engine.
I pasted the payload(IDOC payload) , entered sender service, interface name and namespace and also username and password. Selected quality of servie as Exactly once.
While sending the message getting the following error - "Error while sending".
What could be possible reasons for this error.
Thanks.

Hi,
Please check the following possibilities:
1. Make sure you have selected integration Engine oprtion and not the adapter engine.
2. The USERID and password should be correct.
Please let me know if you still face the problem.
Regards,
Shwetambari.

Automatic restart of Error-Message in Adapter-Engine (Job?)

Hi,
we are working on PI 7.11 and facing following problem:
Often in message-monitoring error-messages are forgotten because of wrong date-selections by the monitorer (not enough days back). It would be very nice, if there is a function witch is repeating error-messages in adapter-engine automaticly and witch can be scheduled.
Does anybody know something about an excisting program / function on PI?
Regards
Jürg

Hi,
By default if any failure occurs in adapter engine (in case of receiver,during delivery to target system)
it will retry 3 times after a period interval of 5 minutes..this is by default even this can be change if needed with the help of the proeprties at NWA/VA...
but in case of failures at IE level (mappings,...) then you need to schedule the report RSXMB_RESTART_MESSAGES....
search SDN if like to know more about the reports...
HTH
Rajesh

HTTP error 403 from Integration engine

Hello,
Problem a)
While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403.
The error message states:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL:
Problem b)
In another observation the sender file adapter after polling the file is unable to send the message to Integration engine and gives a Connection Time out error. it gives the following error.
Transmitting the message to endpoint http://<Host>:<Port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection timed out: connect.
I believe that both the errors are for common cause and possibly the Integration engine is not accepting HTTP request.
It looks like these error due to security reason, it seems some authorization profile is missing or may be some other issue,kindly help us at that front.
Thanks and Regards,
Satish

Hi Suraj,
Thanks for the update.We had checked the URL before posting this message,it is picking up correct URL with namespoace, UID and PWD.Exact error that we are getting is as follows:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL: http://MB1ES1025:50200/sap/xi/adapter_plain?namespace=http://frictionless.esource.com/v2.0&interface=MI_ESI_AWARD_PO&service=FCI_TENANT&QOS=BE&sap-user=pisuper&sap-password=sap$29&sap-client=001&sap-language=EN. Please contact your system administrator.
Here all information are correct.We have checked the SLD check, that is also working fine.Also it is not connectivity related issue, as we are able to transmit XML file to E-Sourcing.
It looks like security issue, but what authorization needs tobe given exactly for HTTP call, we need to know or may be some other issue.
Thanks and Regards,
Satish

HTTP error 403 to Integration engine

Hello,
Problem a)
While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403.
The error message states:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL:
Problem b)
In another observation the sender file adapter after polling the file is unable to send the message to Integration engine and gives a Connection Time out error. it gives the following error.
Transmitting the message to endpoint http://<Host>:<Port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection timed out: connect.
I believe that both the errors are for common cause and possibly the Integration engine is not accepting HTTP request.
Please help.
Thanks and Regards,
Himadri
Edited by: Himadri Chakraborty on Feb 9, 2010 3:35 PM

Time Out Error
In order to get rid of it, Your basis person need to play around with follwing three parameters in order to find an appropriate values as per your hardware sizing and requirement......
icm/conn_timeout
icm/keep_alive_timeout
icm/server_port_< n >
How ever, in general SAP recommandation is as follow....
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=30,PROCTIMEOUT=600 to allow a maximum processing time of 10 minutes.
Hope this helps !!!
Regards,
J Augastine

Max number of chars in process message MSEL?

Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
Thanks and points available

Please make sure that you build a
multithreaded program first (check with ldd).
If anyone can tell me the maximum number of threads per process I would
really appreicate it.
Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
HTH,
-vladimir

Maximum number of licenses reached error message on CCX agent's desktop

Intermittently CAD agents or supervisor are getting the error message "Maximum number of licenses reached". I have checked at the same time of error, still there are license available but users are getting this error message. Currently we have 50 seats licenses.I have noticed this problem reoccur when it's reaching the login agents between 40-50 agents. Is there any threshold value, we can modify to get rid of this error message.

We had a very similar issue last week. For us we had a couple of sessions that were stuck that didn't end properly even after a restart (probably because we have a HA cluster).
We have 35 seat licenses activated but only 33 agents could log in. Ended up raising a TAC case and doing the following -
1) From the command line run show uccx cad license usage to list the current license status - a list of IPs that are currently claiming a license.
2) Run the same command when the contact center is closed and see who is still claiming a license. Here I traced the computers down and made sure the Agent or Supervisor application was closed (forcibly if necessary).
3) Restart the Cisco Desktop License and Resource Manager Service on all nodes in the HA cluster to clear any stuck sessions.
Remember though that anyone logged into the Supervisor application also uses a seat license!

Error message for liveupdate engine COM module - Satellite P100

I have a Satellite P100 using Windows Vista home premium, and upgraded cable internet plans with Optus over the weekend to the Fusion89 plan.
Since then internet has been slow to open (up to 25 seconds when I click on a new tab), and attachments are slow to open from E-mails.
I also keep receiving an error message from Microsoft Windows stating "liveupdate engine COM module stopped working and was closed. A problem caused the application to stop working correctly. Windows will notify you if a solution is available".
I have contacted Microsoft who said they would help me for a fee, but as I have the laptop under an extended warranty, they suggested I contact the people I bought it from or Tochiba. Before I contact Clive Peters soes anyone have any comments or suggestions regarding my issues?
Any assistance will be much appreciated.

Try this:
Go to a Command Prompt and run "CHKDSK C: /F"
Run WindowsUpdate / update Internet Explorer
Try disabling your Antivirus software or Firewall software.
If you installed Optus/connection software, update the software.
Ensure the ISP (optus) proxy settings are correct in IE and the email software.

Error message: The scn engine received a request fro an I/O driver which is not currently installed on the controller.

Hi,
I am currently working in a new application with a cRIO system and I am having some issues when try to run a VI. My actuall configured hardware is as follow:
-cRIO-9113 4 slot chassis
In this chassis I have installed 3 NI 9514 servo interface modules in slot 1, 2 and 3
-cRIO-9022 Real-Time Controller
-NI 9144 8 slot expansion chassis
In this chassis I have installed:
-Slot 1: NI 9213 (16ch thermocouple inputs module)
-Slot 2: NI 9201 (8ch ±10 V analog input module)
-Slot 3: NI 9263 (4ch ±10 V analog output module)
-Slot 4: NI 9426 (32ch sourcing digital input module)
-Slot 5: NI 9426 (32ch sinking digital input module)
-Slot 6: NI 9476 (32ch sourcing digital output module)
In the controller I have installed the following softwares:
-IndCom for EtherCAT Scan Engine Support 1.2.0
-LabVIEW NI SoftMotion Module 9.0.0
-LabVIEW NI SoftMotion Module Scan Engine Support 9.0.0
-LabVIEW Real-Time 9.0.1
-LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
-Web Server for LabVIEW RT 2.0.0
-Language Support for LabVIEW RT 1.0.0.3
-NI Scan Engine 1.1.0
-NI Scan Engine Advance I/O Access 1.1
-NI-Motion 8.0.0
-NI-RIO 3.4.0
-NI-RIO IO Scan 1.4
-NI-VISA 4.6
-NI-VISA Server 4.6
Well, I made VI to test my inputs and outputs, and the problem that I am having is that when I try tu run the VI, in the deployment window I get an error message that read: The scan engine received a request for an I/O driver which is not currently installed on the controller.
Apparently there is another driver that I need to instal in the controller, but I have no idea of what driver could be. If someone have any idea of what this problem could be, I really will appreciate your help.
Ferdinand Martinez
FMO Automation LLC

Hi nausfaratu,
Can you elaborate a little further? What are you doing in your VI? Are you getting this error when you build it into a Real-Time Application (EXE) or when you just run it from the development environment? Is that the recommended set of software or did you do a custom software install on the controller?
Aaron P
National Instruments
Applications Engineer
http://www.ni.com/support

Communication error when sending PI message from Integration Engine to AE

Hi Experts,
we currently installed and configured PI 7.3 system. Even I run post installation PI configuration several times, we are still facing error when Integration engine sends message to messaging system. ( my scenario: I send test message to IE directly, avoiding AE )...
It might look easy: but even adding PIISUSER full authorization and system restart, the result is the same. I don't know if it could have connection but I also get HTTP 200 instead of HTTP 500 when testing INTEGRATION_DIRECTORY_HMI destination.
Thanks for any help.
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx:xxxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSER</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2948</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="1" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>

Hi,
So this password change in Exchange Profile + su01 transaction + system restart didn't help.
I increase trace level, and this is even more detailed log in pipeline step Call Adapter.
We also find out that when message arrive to IE we have in java log three entries:
LOGIN.FAILED
User: N/A
IP Address: xxx
Authentication Stack: sap.com/com.sap.aii.af.ms.app*MessagingSystem
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule    SUFFICIENT ok          exception             true       Received no SAP Authentication Assertion Ticket.
2. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false                 true
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
This log is logged under J2EE_GUEST User.
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
Last two logs are logged by SLD_CL_PIQ user.
Thanks for any help!

- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="2" type="T">no values in cache (lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSERA</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2941</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="3" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>
</Trace>

Strang problem when searching error message in Adapter Engine

Hi all,
In RWB message monitoring, I tried to search all the error messages for yesterday and got no results. But I know there were actually several error messages for yesterday because I got several alert mails.
Then I went to my mail box and copy the message id and used it to search again. Then I found this message was exactlly in "System Error". But if I search all the error messages for yesterday, I get no results.
Anyone knows the problem?
Regards,
Hui

Hello Hui Wang,
<b>Adapter engine resides on Java stack and u view sxmb_moni on the ABAP stack which displays only Integration Server related errors.</b>
Message that passes the Integration pipeline are visible in sxmb_moni. Errors related to CC can be traced in CC monitoring or adapter monitoring in RWB.
With Regards,
Vidya
**************PLEASE REWARD POINTS IF FOUND USEFUL

Customize email alert messages for Integration Engine Errors

Hi experts,
I've configured auto-reaction emails for alerts raised by Integration Engine in CCMS.
The email content I got is as below:
Subject: CCMS alerts PI1 20070319 140556
<i>ALERT for PI1 \ IEngine_PI1_001 Integration Server \ Category MAPPING \ Message alerts by Error Codes at 20070319 060447 ( Time in UTC )
RED CCMS alert for monitored object Message alerts by Error Codes
Alert Text:Error code: GENERIC error text: com/sap/xi/tf/_MM_OperationPro cInfo_ODSOperationP~com.sap.ai i.utilxi.misc.api.BaseRuntimeExceptionFatal Error:
System:PI1
Segment:SAP_CCMS_ootspdbs02_PI1_01
MTE:PI1\IEngine_PI1_001 Integration Server\Category MAPPING\Message alerts by Error Codes
Client:001
User:PIAFUSER
Severity: 50</i>
May I know how I can configure the contents of this message?
I can't seem to find them in any of the CCMS alerts settings.
Please help.
Thanks.
Ron

Hi,
Go through these links..
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
http://help.sap.com/saphelp_nw04/helpdata/en/17/550c404a435509e10000000a1550b0/content.htm
https://websmp102.sap-ag.de/monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/2a/ae8d4243a5de54e10000000a155106/frameset.htm
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
http://help.sap.com/saphelp_nw04/helpdata/en/25/27fb1c56ff3b41a5d6807d3174d5c7/frameset.htm
regards
manoj kumar

Error Type In Integration Engine

Hi All,
Please tell me what type of error/exception can occur in the integration engine? Is it only System Exception that can occur or can Application Exception also occur?
Also please tell me what do you mean by the term SALERT.
Thanks,
Abhishek.

hi abhishek,
I. Errors in Integration Engine
a) qRFC Errors
Often in asynchronous scenarios where inbound queues are used, the queues are set to SYSFAIL status and all the messages in the inbound queue are stuck (not processed). Depending on the status of XI processing queues, we can reset a queueu2019s status and trigger processing of messages.
Manual Resend of messages: Use transaction SMQR or SMQ2 to reset the status of queues. As you can see in the following figure, the queue has been marked with a status sysfail.
To be able to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1
For automatic qRfc failure recovery, schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues.
b) tRFC Errors
Like qRFC errors one can either manually or automatically initiated processing of messages hanged tRFC calls.
Manual Resend of messages: Use transaction SM58 and check through the list. If necessary, start hanging tRFC calls
under the Edit menu by choosing Execute LUWs.
For automatic tRfC failure recover, schedule the report RSARFCEX for periodic execution.
II. Errors in Adapter Engine
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
regards
kummari

How to remove XML messages from Integration Engine

Hi,
i had created file - XI -file scenario activated it and check messages using tcode SXMB_MONI .Error messages coming after every minute as i set polling intervals to 60 seconds .Now i had deleted related objects from IR and ID but still XML messages coming in ....please anyone can help to stop this scenario anyhow.

Dear Jai ,
i had checked everything before this and even i have checked now and i had created that scenaio by my own userid and passwd. Checked sender interface, reciever interface in SXMB_MONI it's the same which i had given name to them . Even we people are surprised that after deleting all the things in IR and ID . i don't know exactly why it is coming but what i am guessing is that after activating the scenarios it might get executed from XI runtime cache and there is no dependency on IR and ID objects . so what i had done that i completely refreshed the XI Runtime Cache by using tcode SXI_CACHE but it's still not working that way also.
Message was edited by:
ashwin dhakne
Message was edited by:
ashwin dhakne

Duplication of messages in Integration Engine Monitoring

I send a file from sender(File System) to receiver (BPM). 1 sender 1 receiver.
There are 2 entries of sender to receiver in Integration Engine Monitoring. These rows are identical.
Quality of Service for File adapter is exactly once.
Could anyone expain this duplication?
Adapter Engine monitoring shows one message of sender

Hi,
pls see the below note for help.
note number: 821267 File FAQ.
. FTP Sender File Processing in Cluster Environment
Q: When running the File Adapter in an environment with more than a single J2EE server instance, the same file is fetched by multiple cluster nodes at once. How do I solve this problem?
A: Initially, please make sure that you do NOT use the processing mode "Test" for your File Sender channel. This mode is intended to be used only for testing purposes and is not guaranteed to work in a cluster environment.
Additionally, please activate the "Advanced Mode" for the respective sender channel or upgrade to SP11 Patch Level 2 or SP12. No further configuration changes are necessary.
Regards,
Satish

Max number of retries of error message in integration engine

Similar Messages

Maybe you are looking for