Max number of swatches in a palette?

Hi,
Is there any limit on a number of swatches in a palette?
Would a 65536 swatches palette cause any problems?

Just discovered experimentally that 20000 is the maximum,
Script was intended to create 65536 swatches, but after creating swatch20000 it never produced another new swatch.
No error messages, just a beep on each further attempt.

Similar Messages

HT204053 Max number of devices on one iTunes account?

Max number of Devices on a single iTunes account

Devices or Computers? The former there is no limit. For the latter there is a limit of 5.

Is there a max number of names that can be put into Contacts

is there a max number of names that can be put into Contacts and still have the app work well?

Yes, there is. It's how many contacts your hard drive can take. So you can fill up the entire computer with nothing but contacts until your HDD/Flash has no space left. So if you have 250GB, it'd be less than if you had 500GB and you'd have more on 750GB.

Max number of chars in process message MSEL?

Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
Thanks and points available

Please make sure that you build a
multithreaded program first (check with ldd).
If anyone can tell me the maximum number of threads per process I would
really appreicate it.
Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
HTH,
-vladimir

What is the max number of hyperlinks supported in a PDF docment?

What is the max number of hyperlinks supported in a PDF docment?
How do I find out how many hyperlinks there are in a PDF document?

I don't think there's a limit to the number of links you can add to a file...
This code (taken from the reference files) will report the number of links in your file:
var numLinks=0;
for ( var p = 0; p < this.numPages; p++)
var b = this.getPageBox("Crop", p);
var l = this.getLinks(p, b);
console.println("Number of Links on page " + p +" is " + l.length);
numLinks += l.length;
console.println("Number of Links in Document is " + numLinks);

Max number of Hits Account Identification

Hi all,
we are currently having the problem in IC that when somebody try to identify an account of an BP with more that 100 related sold to parties, that no account is displayed because of the standard max number of hits 100.
I have found the path to customize this in the SPRO but this sentence in the SAP help is making me some headache:
The higher the number you enter here, the more results the system will search for, and in turn, the more performance is affected. The maximum number of hits that the system allows is 100, which is also the default value.
I understand the point of the performance, but does this mean that the performance is also affected the account identification of the other BP with less than 100 related sold to parties?
Can anybody help in this issue?
We are working on CRM 5.0.
Regards
Abosi
Edited by: Abosi_3li2 on Feb 8, 2012 11:08 AM

Hello
The bug of nothing displayed if over 100 accounts are found is solved with [SAP note 1467929|https://service.sap.com/sap/support/notes/1467929.]
The code you are referring to is:
IF bpident_profile-max_hits IS INITIAL.
max_hits = 100.
ELSE.
max_hits = bpident_profile-max_hits.
ENDIF.
It means that, if blank, 100 hits is considered. You can modify the customizing up to 255 results since that is the limit of accounts to be found.
Regards
Joaquin

"max number of thread"

We are running a java web app on a Ubuntu Oracle WebLogic server version 10.3.3.
The java web app performs long polls with open tcp socket to keep the client connection open. The clients are long polling the WebLogic at 30 seconds.
Currently we are not able to maintain stability for greater than 24 hours with approximately 200 simultaneous sessions on WebLogic server. Session to me is active client/server tcp connection. We have re-written our application to use continuations, but we are seeing ConcurrentModificationException errors in performance testing.
Is there any setting in WebLogic for “max number of thread” that can handle?
Edited by: user9316392 on Jul 8, 2010 11:07 AM

First, WebLogic since 9.0 has a self-tuning thread pool where WLS will automatically grow and shrink the number of threads based on some internal algorithms. I'm not aware of a hard limit so theoretically there is no max thread count as long as the JVM has memory and WLS thinks more threads will help. You can read up on it here:
http://www.oracle.com/technology/pub/articles/dev2arch/2006/01/workload-management.html
Practically, I wouldn't expect more than several hundred threads to be helpful.
As for your situation, how does WLS become unstable? Out of memory, out of file descriptors, errors on new requests, etc. I think you're going to have to use some JVM tools to see what happens to your JVM over time. Is there a memory leak somewhere, is it non-heap memory, etc. JRockit Mission Control is helpful if running on JRockit. If you're on Sun Hotspot, them presumably you can use some of the Hotspot tools. You'll want to compare the state of the JVM towards the beginning of your load test, but after a slight warm-up period with a snapshot after the load test has been running for a long period of time.

Max number of buffers

For fast image grabbing I wand to store images in the memory of the PC. To do this I use LL ring buffering. The max number of buffers is limited by Labview to 50. I tried to increase this by MAX >>Tools >> IMAQ (like suggested on the site) but Labview keeps setting it back to 50, also after rebooting. How can I get this to a higher value?

Hi,
Take a look at this document:
http://digital.ni.com/public.nsf/websearch/FCA602CDBC4EDCEA86256BB1005AB1F2?OpenDocument
This limit is no longer a issue in NI-IMAQ 3.0.1, (except for the NI-1408)
Met vriendelijke groet / Kind regards,
Karsten
Applications Engineer
National Instruments

Max number of orders

Hi,
I am working on ECC 6.0.
I have been trying to use the Max number of orders for a Z condition type .
The Max number of orders it is not working even after reaching the max order even after reaching the max order. If anyone has faced such an issue before kindly help.
I had set the limits for pricing in the VK11 - additional data- Max number of order But of no use.
Thanks
Manoj

hi,
pl check if the conditin update field in the condition type definition is ticked or not at V/06.
regards
sadhu kishore

Max number of simultaneous connections?

Hi everyone!
how is possible to determine in advance the max number of simultaneous connection for my FMS?
thanks!

Hi,
Like Jay had mentioned the limitation on the number of connection to server depends on the capability of your server.
You can get the maximum number of connections made to the server, number of active clients... etc details through Administration APIs.
'getServerStats' gives you the "total_connects", which is the maximum number of connections made to the server. "connected" property will return the number of active clients to your server at one point. It also has many more statistics for your reference. This api returns the overall information of the server. If you want to get the details for specific vhost, you can use getVHostStats or getActiveVHostStats. To get more details on Administration API, refer your pdf documentation on "Administration API", that gets installed in your system under "$Root\Flash Media Server\documentation\flashmediaserver_3.5_administrationAPI.pdf".
Regards,
Janaki L

Max number of dataproviders in the same workbook

Hi,
Do you know please what is the max number of dataproviders (recommanded by SAP) we can use in the same workbook / Bex analyzer?
For information, we are in BI 7 based on excel 2003.
Thx.
Radj.
Edited by: Radjech Radjech on Dec 3, 2010 12:24 PM

One suggestion is:
Each tab (copy of the query) would have distinct filter value(s). In workbook settings, Uncheck "Allow Refresh of Individual Queries". Also in WB settings, Do Not Refresh at Opening. For the entire 50-tab workbook, the filter is limited to a minimum: company code and the date range because the other filters are hardcoded in each tab. When you refresh and change variable values at opening the file, all you enter is the company code value and the date
You might also want to change the Grid Properties: Uncheck Apply Formatting (for performance); and Uncheck Allow Navigation. You can add these back later. Might as well uncheck Sort.
I have my own question about the DPs. Can you rename them from the generic Data Provider 1 or copy of Data Provider 1?
Susan McLeod

Max number of persons in contact groups - Nokia Lu...

The max number of persons allowed in a contact group is (as far as I know) restricted to 20 persons. This seems very low and I wonder why this restriction is applied. A limitation of 20 persons in a group is not practical. Any explanation or any idea if this can be changed in the future?

As you've discovered the maximum number of contacts you can have in a contact group is 20. If you'd like this limit to be changed to a higher number you really should post a request or add your votes to a similar request on Microsoft's user voice fo.... This is the place that Microsoft created to field user requests for enhanced options for windows phone.
Microsoft MVP Windows Phone

What is Max number of schema in a single DB ?

Hi All,
I have small query does anyone have any idea about
What is Max number of schema in a single DB we can specify in oracle ?
Thanks n advance.
Anwar

You don't say which version of the database you are using. In 10gR2 the maximum limit on users and roles is 2,147,483,638.
I think this is more users than any sensible DBA would want to manager :)
Cheers, APC

Max number of pages in a spool

Hi Gurus,
I have a background job which takes an input file from app server.Input file has 50000 records.I need to process them inside the program and display the result in spool.Now,my question is ,will I be able to see all the records.is there any upper limit for no.of pages that gets generated in the spool.

Usally no limit for max number of pages ( There may be a system setting for it). But when you scroll down, it does not display all the data. You can either click on the button Settings and choose last 10 pages or click on last page button and that will display till the end.

Max number of records in MDM workflow

Hi All
Need urgent recommendations.
We have a scenario where we need to launch a workflow upon import of records. The challenge is source file contains 80k records and its always a FULL load( on daily basis) in MDM. Do we have any limitation in MDM workflow for the max number of records? Will there be significant performance issues if we have a workflow with such huge number of records in MDM?
Please share your inputs.
Thanks-Ravi

Hi Ravi,
Yes it can cause performance overhead and you will also have to optimise MDIS parametrs for this.
Regarding WF i think normally it is 100 records per WF.I think you can set a particular threshold for records after which the WF will autolaunch.
It is difficult to say what optimum number of records should be fed in Max Records per WF so I would suggest having a test run of including 100/1000 records per WF.Import Manager guide say there are several performance implications of importing records in a WF,so it is better to try for different ranges.
Thanks,
Ravi

Max number of swatches in a palette?

Similar Messages

Maybe you are looking for