Max number of videos in podcast in iweb

i have tried and tried but it seems that i can only add 5 videos to my podcast. i have pleanty of room on my idisk, but it seems that when i add a new podcast, one of the previous ones is removed? am i crazy???
please help!

Manny,
you can change this default setting from 5 to 50 by going to the INSPECTOR window found in the VIEW menu in iWeb.
When you've got the inspector window open, then click once on your podcast page in the SITE ORGANIZER on the left of the screen.
Back to the INSPECTOR, on the Blog/Podcast page, click on the BLOG side and change the number of allowed entries to 50. This changes the allowed podcasts also. It's kinda a "pump fake" if you ask me the way they wrote it, but it does the trick. Took me a week to figure this one out.
This should take care of it for ya.
jim

Similar Messages

Maximum number of buttons for a single screen? Max Number of videos?

I'm getting horribly slow performance (waiting for minutes at a time to do simple menu edits) and frequent crashes in Encore CS5. It is nearly unusable.
I have about 45 individual short clips that I want to put on a DVD. Each clip needs to play and then return to the main menu screens (i have 3 menus set up to break up the clips).
I have the basic structure set up (after a few dozen crashes and sluggish performance) but auto-routing on the buttons results in instant crashes and the final DVD burn doesn't follow the routing that I've set up manually.
This software is deeply deeply flawed. What are it's official limitations because I seem to be exceeding boundaries in many places (even though my project isn't particularly sophisticated)?

Adobe shouldn't enforce restrictions regarding number of buttons on a single screen!
A warning is Ok, but this decision should be left to the user!
Why? I burned the other day a fully functional Blu-ray disc (BDMV) with a SINGLE submenu page containing 52 text buttons (!) + RETURN button back to the Top Menu. I used Sony Media's DVD Architect (v.5.0.b) to do that. I played the disc on my Sony BDP-S550 without any problem whatsoever (as well as on my PC both the physical disc, and from the BDMV folder, using both PowerDVD and ArcSoft's software). I'm pretty confident it'll play in other players as well.
So, in my experience it's fully possible to have a lot more than 18 buttons on a blu-ray (sub)menu, in spite the formal DVD definitions.
I was rather disappointed to discover that Encore restrict that
(I wanted to use Enocre since DVD Architect needed to recompress the source, I don't want that.)
My Encore experience in this case summarized:
- I can place all the 52 buttons on a submenu manually,
- "Check project" is fine with that (no errors),
- The links are Ok ("Show button routing")
=> In the "Preview", however, only the first 18 links navigate, the rest play "dead" (don't activate even if I move the mouse over those)!
Still, if I choose a specific Chapter beyond #18 (say #39) in the field below, it plays the requested Chapter!
How about that.
This is an irritating and unnecessarily enforced restriction by Adobe.
Let me decide, please!
Cheers,
Willy

HELP!! "timed out" submiting video podcast through iweb to itunes

I am trying to submit a vid podcast through iweb to itunes and am getting a timed out message. Please help. I have read other posts similar to my problem, and have checked to see that all of my fields are filled in. Don't know what the deal is. thanks for the help.

This is what I received from iTunes help:
Dear Eric,
The iTunes team reviews each podcast submission. Depending on demand,
it may take a week or two before the podcast is published.
I'm sorry to hear you received an error when you tried to publish a
podcast to the iTunes Store. If you are re-submitting a podcast for
review, the iTunes Store may detect the submission as a duplicate and
generate an error message stating that the feed has already been submitted.
You can follow these steps to resubmit the podcast:
1) Change the title and link fields of the RSS feed to something other
than what they are now.
2) Resubmit the podcast feed via iTunes.
3) Once you have successfully submitted the podcast, you can change the
title and link fields back to what they were.
There are several less-common reasons iTunes might have displayed this
error:
* The podcast's RSS feed was not available.
* The podcast's RSS feed timed out.
* The podcast's RSS feed could not be validated.
If you are the podcaster, make sure your podcast is available on the
Internet. Your podcast's RSS feed also should conform to the iTunes
extended podcast RSS specification.
http://www.apple.com/itunes/store/podcaststechspecs.html
If you're still having trouble, consider consulting the Apple
Discussions forums, which have a wealth of information about specific issues.
Click Producing Podcasts in the Pro Digital Production area of this page:
http://discussions.apple.com
If you are not the podcaster, please contact the podcaster and direct
them to our specification.
Thank you for your interest in the iTunes Store. Have a great day.
Sincerely,
Nicole
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww

Max Number of Files?

Is there a maximum number of photos/videos you can have in Photoshop Album?
(Sorry if has already been answered. I searched but couldn't find anything)
Thanks!

Hello,
I have the following questions which is linked to the "max number of files".
Since I am using the oldest PhotoShop Album version (V1), I am wondering if I can continue with it. I have 6000 pictures, and growing ~100 each months.I would like to migrate to PhotoShop Elements 8, I tried the trial version, but when trying to import the PSA catalog file, I have an error around 35% conversion... Anybody know what I can do ???
I tried to do a repair with PhotoShop Album, without success.
I can import pictures, by groups of 1000
But then, how could I merge all catalog ??
Thanks,
Kamayana

How to set naming standard that sets max number of words in column name?

Hi all,
Is it possible to set naming standard that sets max number of words in colum (or table) name?
I was looking video (1:08min)
http://download.oracle.com/otn_hosted_doc/sqldev/UserDefinedDesignRules/UserDefinedDesignRules.html
And here you can see how rule is triggered.
"...Name has 2 words; Max permitted - 1".
Thanks a lot

Hi,
you need to create glossary and set it in naming standards for your design.
This document is still valid - http://www.oracle.com/technetwork/developer-tools/datamodeler/datamodelernamingstandards-167685.pdf
Naming standard settings are located :
- DM 3.x - "Preferences>Data Modeler>Naming Standard"
- DM 4.0 - Design dialog>Settings>Naming Standard
If you want only check on number of words then glossary can be empty and you can set "Incomplete modifiers" option in that glossary.
Philip

HT204053 Max number of devices on one iTunes account?

Max number of Devices on a single iTunes account

Devices or Computers? The former there is no limit. For the latter there is a limit of 5.

How to change title for podcast on iweb

I am getting the error that my podcast has already been submited to itunes but it hasn't. I sent itunes support an email and they said to change the title of the RSS. Can anyone tell me how to do that in iweb for the podcast?

Bonjour
Message was edited by: Koeklin
Change the name of your podcast in iweb sidebar

Is there a max number of names that can be put into Contacts

is there a max number of names that can be put into Contacts and still have the app work well?

Yes, there is. It's how many contacts your hard drive can take. So you can fill up the entire computer with nothing but contacts until your HDD/Flash has no space left. So if you have 250GB, it'd be less than if you had 500GB and you'd have more on 750GB.

Max number of chars in process message MSEL?

Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
Thanks and points available

Please make sure that you build a
multithreaded program first (check with ldd).
If anyone can tell me the maximum number of threads per process I would
really appreicate it.
Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
HTH,
-vladimir

YouTube embedded videos not working on iWeb 3.01/Safari?

My website has three videos, uploaded to YouTube and the embed codes downloaded to iWeb 3.01 site using HTML.
All three videos work on the site pages, although video one uses the "new" code and videos two/three use the "old" code.
In each case, I have had to add http: before //www.youtube.com to make these videos load to the iWeb site.
After uploading the site to Host Co. using FTP. The site works perfectly when using Firefox. But when using Safari video one will play
but videos two and three will not play and an error message is displayed.
Please help - am I missing something from the coding, or do I need to do something specail for Safari?
I am not an expert on coding.
Thank you

Thank you Wyodor, I also believe the solution may be simple, if it helps (and for all you coding experts out there) these are the three video/codes being used. For each code I had to add after " http: and before
//www.youtube to load videos to iWeb using html widget.
Video One code
This video on published website - plays using both Safari and Firefox.
<iframe width="1000" height="563" src="http://www.youtube.com/embed/rrMsYI6XVSw?rel=0" frameborder="0" allowfullscreen></iframe>
Video Two code
This video on published website - plays using Firefox but will NOT play using Safari.
<object width="1000" height="563"><param name="movie" value="http://www.youtube-nocookie.com/v/MDfE087Hgvw&hl=en_US&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube-nocookie.com/v/MDfE087Hgvw&hl=en_US&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="1000" height="563"></embed></object>
Video Three code
This video on published website - plays using Firefox but will NOT play using Safari.
<object width="1000" height="563"><param name="movie" value="http://www.youtube-nocookie.com/v/X5n6M66jgUo&hl=en_US&fs=1&rel=0&color1=0xe1600 f&color2=0xfebd01&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube-nocookie.com/v/X5n6M66jgUo&hl=en_US&fs=1&rel=0&color1=0xe1600 f&color2=0xfebd01&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="1000" height="563"></embed></object>
If anybody knows the solution to this problem I will be pleased to hear from them. I am not a coding expert!

What is the max number of hyperlinks supported in a PDF docment?

What is the max number of hyperlinks supported in a PDF docment?
How do I find out how many hyperlinks there are in a PDF document?

I don't think there's a limit to the number of links you can add to a file...
This code (taken from the reference files) will report the number of links in your file:
var numLinks=0;
for ( var p = 0; p < this.numPages; p++)
var b = this.getPageBox("Crop", p);
var l = this.getLinks(p, b);
console.println("Number of Links on page " + p +" is " + l.length);
numLinks += l.length;
console.println("Number of Links in Document is " + numLinks);

Max number of Hits Account Identification

Hi all,
we are currently having the problem in IC that when somebody try to identify an account of an BP with more that 100 related sold to parties, that no account is displayed because of the standard max number of hits 100.
I have found the path to customize this in the SPRO but this sentence in the SAP help is making me some headache:
The higher the number you enter here, the more results the system will search for, and in turn, the more performance is affected. The maximum number of hits that the system allows is 100, which is also the default value.
I understand the point of the performance, but does this mean that the performance is also affected the account identification of the other BP with less than 100 related sold to parties?
Can anybody help in this issue?
We are working on CRM 5.0.
Regards
Abosi
Edited by: Abosi_3li2 on Feb 8, 2012 11:08 AM

Hello
The bug of nothing displayed if over 100 accounts are found is solved with [SAP note 1467929|https://service.sap.com/sap/support/notes/1467929.]
The code you are referring to is:
IF bpident_profile-max_hits IS INITIAL.
max_hits = 100.
ELSE.
max_hits = bpident_profile-max_hits.
ENDIF.
It means that, if blank, 100 hits is considered. You can modify the customizing up to 255 results since that is the limit of accounts to be found.
Regards
Joaquin

"max number of thread"

We are running a java web app on a Ubuntu Oracle WebLogic server version 10.3.3.
The java web app performs long polls with open tcp socket to keep the client connection open. The clients are long polling the WebLogic at 30 seconds.
Currently we are not able to maintain stability for greater than 24 hours with approximately 200 simultaneous sessions on WebLogic server. Session to me is active client/server tcp connection. We have re-written our application to use continuations, but we are seeing ConcurrentModificationException errors in performance testing.
Is there any setting in WebLogic for “max number of thread” that can handle?
Edited by: user9316392 on Jul 8, 2010 11:07 AM

First, WebLogic since 9.0 has a self-tuning thread pool where WLS will automatically grow and shrink the number of threads based on some internal algorithms. I'm not aware of a hard limit so theoretically there is no max thread count as long as the JVM has memory and WLS thinks more threads will help. You can read up on it here:
http://www.oracle.com/technology/pub/articles/dev2arch/2006/01/workload-management.html
Practically, I wouldn't expect more than several hundred threads to be helpful.
As for your situation, how does WLS become unstable? Out of memory, out of file descriptors, errors on new requests, etc. I think you're going to have to use some JVM tools to see what happens to your JVM over time. Is there a memory leak somewhere, is it non-heap memory, etc. JRockit Mission Control is helpful if running on JRockit. If you're on Sun Hotspot, them presumably you can use some of the Hotspot tools. You'll want to compare the state of the JVM towards the beginning of your load test, but after a slight warm-up period with a snapshot after the load test has been running for a long period of time.

Max number of buffers

For fast image grabbing I wand to store images in the memory of the PC. To do this I use LL ring buffering. The max number of buffers is limited by Labview to 50. I tried to increase this by MAX >>Tools >> IMAQ (like suggested on the site) but Labview keeps setting it back to 50, also after rebooting. How can I get this to a higher value?

Hi,
Take a look at this document:
http://digital.ni.com/public.nsf/websearch/FCA602CDBC4EDCEA86256BB1005AB1F2?OpenDocument
This limit is no longer a issue in NI-IMAQ 3.0.1, (except for the NI-1408)
Met vriendelijke groet / Kind regards,
Karsten
Applications Engineer
National Instruments

Max number of orders

Hi,
I am working on ECC 6.0.
I have been trying to use the Max number of orders for a Z condition type .
The Max number of orders it is not working even after reaching the max order even after reaching the max order. If anyone has faced such an issue before kindly help.
I had set the limits for pricing in the VK11 - additional data- Max number of order But of no use.
Thanks
Manoj

hi,
pl check if the conditin update field in the condition type definition is ticked or not at V/06.
regards
sadhu kishore

Max number of videos in podcast in iweb

Similar Messages

Maybe you are looking for