Max Processor for T61P system?

Hello all:
I aquired a T61P model 200793u recently. Too bad I got severly burned on price, but oh well, live and learn. This model has a T2600 @ 2.16 GHZ with 2MB L1 cache and front side bus at 667 mhz. The chipset is an 845PM. I am wondering if I can install a processor such as a T9500 which runs the front side @ 800mhz, or will I run into compatiblity problems with the 845PM chipset? Any who have hot rodded one of these model care to shed some info please?
TNX for your time
Tony

Well, T60/p series were introduced after the Lenovo's acquisition of IBM's PC division...
Does it really matter, though?
Let's face it: both IBM and Lenovo had some great machines on the market, and some issue-ridden ones as well, take it from someone who had owned most of them at some point in his life...
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

Max processor for K8N Neo2?

Howdy, I have a K8N Neo2 and I'm looking to upgrade the processor in it. Looking at the specs on the website it lists "Supports up to 3500+, 3800+ Athlon 64 FX 53, or higher CPU". Has anyone put anything faster then an FX53 in a K8N Neo2 and it worked? Just wondering how fast I can go with the processor in this board.
Thanks,
Harold

K8N Neo2 Platinum CPU Support Status
K8N Neo2-FX CPU Support Status
K8N Neo2-F CPU Support Status
Remeber to upgrade your MB bios version before you install new CPU onto the board.

Max Processor for Mini

What's the max microprocesor I could install on my Mac Mini (Core Duo 1,83 Mhz)?

A Merom T7600 2.33 Ghz. Check out "No video at boot after upgrade".

The max. OS X system for Powerbook G4 is 10.5?

just got to know via wikipedia, that for powerbook G4, the max. software could be 10.5;
mine is 12'' powerbook G4 running 10.4.11 at this moment; any possibility to upgrade the system, so I can use iCloud?

iCloud Requirements http://support.apple.com/kb/HT4759
Leopard 10.5 is the max OS for PowerPC processor Macs. To go highre, you need a Mac with an Intel processor.
 Cheers, Tom

Need to upgrade processor for Lion operating system

How do I upgrade my MacBook Pro processor for Lion operating system?

I have the same question. I have a MacBook Pro 1,2 (yeah, oooooold) with the 2.16 Intel Core Duo, running Snow Leopard. If I'd waited another month before buying, it would've had the Core 2 Duo.
It would appear that I can't upgrade to Lion. I found one forum post that gives me hope, but I'm not holding my breath: http://www.mac-forums.com/forums/apple-notebooks/84004-processor-upgrade.html#po st524333 It suggests that the CPU might not be soldered in. Which leads me to wonder if upgrading the processor is possible...
I'd like to know if upgrading the processor is possible and/or practical (as in, doesn't cost as much as buying a new mac).

Data size bigger than max size for this type

First, I'd like to thank you for release 1.2.1, it works like
a charm! Keep up the good work. Here are my questions:
1. When parsing a stored procedure, I get the message "Data
size bigger than max size for this type". Can you tell me what
causes this?
2. Is there any list of all the error messages that can be
given by Migration Workbench?
Thank You,
Shane Brubaker
null

Shane,
With respect to your questions :
1. Could you possibly send [email protected] (that is
our helpdesk, a direct line into development) a little more
information about what you were doing. Also, if you could
send us the stored procedure in question (no data required)
then we could try to reproduce the error in-house and better
evaluate what is going on.
2. The majority of errors ORA-**** are actually generic
Oracle errors and can be found in the Server documentation.
As for our specific errors most parser messages can be
found in the appendix "Parser Reference" from the help system.
Regards,
Marie
===
Shane Brubaker (guest) wrote:
: First, I'd like to thank you for release 1.2.1, it works like
: a charm! Keep up the good work. Here are my questions:
: 1. When parsing a stored procedure, I get the message "Data
: size bigger than max size for this type". Can you tell me what
: causes this?
: 2. Is there any list of all the error messages that can be
: given by Migration Workbench?
: Thank You,
: Shane Brubaker
Oracle Technology Network
http://technet.oracle.com
null

Best practice on Oracle VM for Sparc System

Dear All,
I want to test Oracle VM for Sparc System but I don't have new model Server to test it. What is the best practice of Oracle VM for Sparc System?
I have a Dell laptop which has spec as below:
-Intel® CoreTM i7-2640M
(2.8GHz, 4MB cache)
- Ram: 8GB DDR3
- HDD: 750GB
-1GB AMD Radeon
I want to install Oracle VM VirtualBox on my laptop and then install Oracle VM for Sparc System in Virtual Box, is it possible?
Please kindly give advice,
Thanks and regards,
Heng

Heng Horn wrote:
How about computer desktop or computer workstation with the latest version has CPU supports Oracle VM or SPARC?Nope. The only place you find SPARC T4 processors is in Sun Servers (and some Fujitsu servers, I think).

How can I export my configuration from MAX to another automation system through NI-DAQmx

Hi,
has someone of you an idea how i can export my configuration from MAX to another automation system through NI-DAQmx?
We created a dll for the communication between the AUSY (not LabVIEW) and NI-DAQmx. The export file .nce is not in ascii format, so we can't use it or is there a way of solving our problem with it?
Thanks for helping me
Eddy

I recently came across this, does it help at all?
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E7E556A4E034080020E74861
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Using the XSLT processor for non-workbench XSLT

Hi there,
is it possible to use the built-in XSLT processor for arbitrary XSLT transformations which aren't checked in in the ABAP workbench but instead given as a runtime object (string or iXML)?
Instead of the built-in command CALL TRANSFORMATION which according to the doc is restricted to workbench transformations, I am looking for an option like this:
data: lo_transformation type ref to if_ixml_document,
      lo_source         type ref to if_ixml_document,
      lo_target         type ref to if_ixml_focument.
* I get lo_transformation and lo_source from somewhere out there
try.
    lo_target ?= cl_some_fine_class_which_i_am_looking_for=>transform(
                      io_source         = lo_source
                      io_transformation = lo_transformation ).
catch cx_xslt_runtime_error.
endtry.
Does anybody know such a feature?
For a background about this problem - in German language - see my blog
http://ruediger-plantiko.blogspot.com/2007/08/xslt-in-bsp-anwendungen-und-in-abap.html
Thanks and Regards,
Rüdiger

Dear Rashid,
thanks - this is the answer! I wonder why I didn't find this class one year ago. A little test prog shows that it works fine and even performant (about 0.5 millisec for creating the new dynamic XSLT program with the method set_source_stream( ) ). For usage in web apps, it would be nice to know whether the temporary program remains available in the application servers' buffer after end of process. I can't check this, since this is performed on the C/C++ level, and SE30 doesn't track the method set_source_stream() itself (it could show a decrease of runtime after the first call).
Here comes a little self-contained ABAP program to test the functionality. It works well on our system with SAPKB70012.
Thanks and regards,
Rüdiger
* --- Test usage of a dynamically given non-workbench XSLT program
report zz_test_cl_xslt_processor.
data:
* iXML master
go_xml type ref to if_ixml,
* iXML stream factory
go_sf type ref to if_ixml_stream_factory.
load-of-program.
go_xml = cl_ixml=>create( ).
go_sf = go_xml->create_stream_factory( ).
start-of-selection.
perform start.
* --- Start
form start.
data: lo_source    type ref to if_ixml_document,
        lo_result    type ref to if_ixml_document,
        lo_processor type ref to cl_xslt_processor,
        lv_p         type progname,
        lo_ex        type ref to cx_xslt_exception.
perform get_source changing lo_source.
create object lo_processor.
try.
* Set source
      lo_processor->set_source_node( lo_source ).
* Set result
      lo_result = go_xml->create_document( ).
      lo_processor->set_result_document( lo_result ).
* This could be time-critical, the creation of a dynamical XSLT prog?
      perform set_transformation using lo_processor
                                 changing lv_p.
* call xslt-proc
      lo_processor->run( lv_p ).
* Display result
      call function 'SDIXML_DOM_TO_SCREEN'
        exporting
          document    = lo_result
          title       = 'Result of Transformation'
        exceptions
          no_document = 1
          others      = 2.
    catch cx_xslt_exception into lo_ex.
      sy-msgli = lo_ex->get_text( ).
      message sy-msgli type 'I'.
endtry.
endform.                    "start
* --- Set XSLT transformation from stream
form set_transformation using io_processor type ref to cl_xslt_processor
                        changing cv_p type progname.
data: lo_trans     type ref to if_ixml_istream.
* sv_p contains temp. name of XSLT program after first call
statics: sv_p   type string.
if sv_p is initial.
* It seems that the name can be buffered on appserver level?
    import progname to sv_p
           from shared buffer indx(zx) id 'ZZ_TEST_XSLT_PROC'.
    if sv_p is initial.
      sv_p = 'X'.
    endif.
endif.
* Provide the stream containing the XSLT document (as a stream)
perform get_transformation changing lo_trans.
* Set transformation
io_processor->set_source_stream( exporting stream = lo_trans
                                   changing p      = sv_p ).
* Buffer progname on server - seems to work
export progname from sv_p
         to shared buffer indx(zx) id 'ZZ_TEST_XSLT_PROC'.
* string -> c move necessary, since xslt-proc-interface doesn't use
* the generic type csequence for program name
cv_p = sv_p.
endform.                    "set_transformation
* --- Parse a source given as string into an if_ixml_document
form get_source changing co_src type ref to if_ixml_document.
data: lv_s      type string,
        lo_stream type ref to if_ixml_istream,
        lo_parser type ref to if_ixml_parser.
concatenate
`<?xml version="1.0" encoding="iso-8859-1"?>`
`<countings filiale="2412" invnu="TIEFKUEHL SEPT.07">`
`<count recNum="1" gid="1" ean="59111828843" menge="1"`
`preis="0" recNumFrom="1"></count>`
`</countings>`
into lv_s.
* Eingabestream erzeugen und in if_ixml_document abbilden
lo_stream   = go_sf->create_istream_string( lv_s ).
co_src      = go_xml->create_document( ).
lo_parser   = go_xml->create_parser( document       = co_src
                                       istream        = lo_stream
                                       stream_factory = go_sf ).
lo_parser->parse( ).
endform.                    "get_source
* --- Put the transformation given as string into an if_ixml_istrean
form get_transformation changing co_trans type ref to if_ixml_istream.
data: lv_s   type string.
concatenate
`<?xml version="1.0" encoding="iso-8859-1"?>`
`<xsl:transform version="1.0"`
` xmlns:xsl="http://www.w3.org/1999/XSL/Transform"`
` xmlns:asx="http://www.sap.com/abapxml">`
`<xsl:strip-space elements="*"></xsl:strip-space>`
`<xsl:template match="countings">`
` <asx:abap>`
`   <asx:values>`
`     <SELOPT>`
`       <WERKS><xsl:value-of select="@filiale"></xsl:value-of></WERKS>`
`       <INVNU><xsl:value-of select="@invnu"></xsl:value-of></INVNU>`
`     </SELOPT>`
`     <COUNTINGS>`
`       <xsl:for-each select="count">`
`         <ZSRS_ZWSTI_LINE>`
`           <MATNR></MATNR>`
`           <EAN11><xsl:value-of select="@ean"></xsl:value-of></EAN11>`
`           <MAKTX></MAKTX>`
`           <MENGE><xsl:value-of select="@menge"></xsl:value-of></MENGE>`
`           <MEINH></MEINH>`
`           <UNAME></UNAME>`
`           <EXVKW></EXVKW>`
`           <WAERS></WAERS>`
`           <FF></FF>`
`           <GID><xsl:value-of select="@gid"></xsl:value-of></GID>`
`           <RECNUM><xsl:value-of select="@recNum"></xsl:value-of></RECNUM>`
`           <RECNUM_FROM><xsl:value-of select="@recNumFrom"></xsl:value-of></RECNUM_FROM>`
`           <REF_RECNUM><xsl:value-of select="@refRecNum"></xsl:value-of></REF_RECNUM>`
`         </ZSRS_ZWSTI_LINE>`
`       </xsl:for-each>`
`     </COUNTINGS>`
`   </asx:values>`
` </asx:abap>`
`</xsl:template>`
`</xsl:transform>`
into lv_s.
co_trans = go_sf->create_istream_string( lv_s ).
endform.                    "get_transformation
Edited by: Rüdiger Plantiko on Jul 4, 2008 10:25 AM

Max Size for a message thru SAP PI 7.0 SPS13

Hi,
     I have a problem with a very large message. The scenario is a JDBC -> SAP PI -> ABAP Proxy. I'm getting this error:
ErrorTransmitting the message to endpoint http://<server>:8000/sap/xi/engine?type=entry
using connection JDBC_http://sap.com/xi/XI/System failed, due to:
com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: Error writing to server.
     We try to solves it changing the EO_MSG_SIZE_LIMIT parameter in SXMB_ADM but it doesn't help us at all.
     How can we set the max size for a message that going thru SAP PI.
     We have SAP PI 7.0 SPS 13.

HI Luis
Whats the message size and whats the value you have given in EO_MSG_SIZE_LIMIT. After saving this parameter did you verified at RWB ->RWB->Component Monitoring->Integration Engine->
Settings->Tuning
Add one more EO_INBOUND_TO_OUTBOUND this will allow data not to be placed on Outbound queue and bring to inbound queue. This is having advantage that to process high volume message you will get better performance but disadvantage is when there is no receiver inbound queue is blocked.
It can be a issue related to connection. Please check with the RFC you have for proxy and IE RFC's
Thanks
Gaurav
Edited by: Gaurav Bhargava on Nov 22, 2008 11:44 PM

I'm looking at the dell Inspiron Desktop 4th Generation Intel Core i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400?

I'm looking at the dell Inspiron Desktop 4th Generation Intel® Core™ i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400? my old desktop is a AMD about 5 years old so there will be a huge change in speed to what I am use to
Here are the specks on both:
Inspiron
Processor
4th Generation Intel® Core™ i5-4460 Processor (6M Cache, up to 3.40 GHz)
Operating System
Help Me Choose
Windows® 8.1 (64Bit) English
Memory2
8GB Dual Channel DDR3 1600MHz (4GBx2)
Hard Drive
1TB 7200 rpm SATA 6Gb/s Hard Drive
Video Card
NVIDIA® GeForce® 705 1GB DDR3
Ports
Front
(2) USB 2.0, MCR 8:1, Mic and Headphone Jacks
Rear
Four USB 2.0 connectors , Two USB 3.0 connectors, HDMI, VGA, RJ-45 (10/100/1000 Ethernet), 3-stack audio jacks supporting 5.1 surround sound
Media Card Reader
Integrated 8-in-1 Media Card Reader
(supports Secure Digital (SD), Hi Speed SD (SDXC), Hi Capacity SD (SDHC), Memory Stick (MS), Memory Stick PRO (MS PRO), Multimedia Card (MMC), Multimedia Card Plus (MMC Plus), xD-Picture Card(XD))
Memory Slots
2 DIMM Slots
Chassis
Bluetooth
BT 4.0 via 1705 WLAN card
Chipset
Intel® H81 PCH
Power
300 Watt Power Supply
XPS 8700
Processor
4th Generation Intel® Core™ i7-4790 processor (8M Cache, up to 4.0 GHz)
Operating System
Help Me Choose
Windows 8.1 (64Bit) English
Choose Options
Memory2
12GB Dual Channel DDR3 1600MHz (4GBx2 + 2GBx2)
Hard Drive
1TB 7200 RPM SATA Hard Drive 6.0 Gb/s
Video Card
NVIDIA GeForce GTX 745 4GB DDR3
CPU Thermal
86W
Graphics Thermal
225W/150W/75W
Power
460W, optional 80 PLUS Bronze, 85% efficient, supply available on ENERGY STAR configurations
Ports
Bays
Support for 4 HDD bays: including (3) 3.5” HDDs
–Capable of 1 SSD and 3 HDD configuration
Media Card Reader
19-in-1 Card Reader (CF Type I, CF Type II, Micro drive, mini SD, MMC, MMC mobile, MMC plus, MS, MS Pro, MS Pro Duo, MS Duo, MS Pro-HG, RS-MMC, SD, SDHC Class 2, SDHC Class 4, SDHC Class 6, SM, xD)
Slots
Memory Slots
4 DIMM

From my personal experience, I wouldn't go for an Integrated card. This is one of the most important components for Photoshop, so invest in a decent graphics card (ATI or NVidia). It doesn't have to be a really exepensive one - I have been using ATI Radeon with 256MB of RAM on my Dell Studio for almost two years and it still rocks! (even when I work with 3D in Ps CS5 Extended).
I would also invest in more RAM (this can be added easily - I bought extra 4GB as my Studio came with 3GB).
I wouldn't worry about the processor - I'm on Intel Core 2 Duo - and it works very very well, it's very quick which is very important as I'm training Photoshop.
I hope this helps.

JAVA for embedded systems: just a myth ?

Hi,
I'm relatively new to JAVA (a year or so), and so far I'm fascinated. I've only developed for PC using J2SE, although I'heard a lot of hipe about J2ME, which I guess is the JAVA for embedded systems (correct me if I'm wrong here).
I worked a lot with microcontrollers, and I think it would be really nice to program them using JAVA. I googled serched for JAVA enabled embedded systems, but I couldn't find anything.
Anyway, this morning I got to this site and find a very interesting article, which I'd like to share with you and hear your opinions about the 5th myth.
The link is: http://www.chipcenter.com/knowledge_centers/embedded/todays_feature/showArticle.jhtml?articleID=10300909
Cheers!!

>... very interesting article, which I'd like to share with
you and hear your opinions about the 5th myth.
Very interesting. I'd always wondered what happened to the Java chips...
Here's a thought, and an associated question, if any of you reading this happen to be up on modern processor architecture...
What about microcode? Back in school (decades ago) I learned a bit about microcode, which was like very simple, low-level instructions that a processor would "execute" to execute each assembly/machine language instruction. The idea was that if you needed to tweak the instruction set of a processor, you could rewrite its microcode. Seems like this would lend itself nicely to implementing a JVM in "hardware"... The question is, do they even use microcode anymore? With the pursuit of speed and optimization, I wonder if they didn't abandon it and go with highly specialized/optimized circuits instead...
Back to the original question -- it would be somewhat ironic if Java weren't available for embedding systems. The original target system was set-top boxes, etc. I've tried a few JVMs on my Palm -- they're getting there!

JCO connection error:Couldn't create JCOClientConnection for logical System

Hi All,
We are facing a production outage issue.
We have a Federated Portal Network setup where one of our producer goes down automatically (seems on heavy load).
On this Producer server we have 3 Web Dynpro applications deployed and default trace is full with JCO connection error   saying Could   not create JCOClientConnection for logical System: CSVMR_WD_MODELDATA_DEST.
We had issue with max allowed JCO connections so we changed the below mentioned parameters for JCO connection settings in portal:
u2022     Minimum value of JCo Pool Size in total = 80
u2022     Minimum value for CPIC_MAX_CONV per SAP Web AS = 320
u2022     Maximum Number JCo Connections = 160
Please let us know if we are missing on some settings, any help in this regard is appreciated.
Regards,
Priyanka

Hi,
As you have already increased the maximum number of connections/pool size but still you are facing this problem. I would suggest you to check the web dynpro application which might not be able to release/disconnect the JCO connection.
Please check this [Thread|How to close a model object connection for Adaptive RFC?; for more details.
Regards
Puneet

Configuration of EWA reports for java systems.

Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!

Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks

Best option for a word processor for the G3 dual usb running Panther

More and more I am coming to rely on my G3 for word processing tasks - particularly research notes and a personal journal.
So far I've tried the simple text editor (quick but poor text on-screen), OpenOffice (being xwindow it's slow to load and slow to update screen) and AppleWorks (good display but no spell checker) -each have problems for me.
What is the best word processor for the G3 running Panther (or Classic/9 for that matter). I need: Quick to load/run, readable text, automatic word wrap, spell checking and a reasonable path to exchange files with my desktop Linux system.

AppleWorks does have a spellchecker; it just is not automatic (check-as-you-type).
In AppleWorks, go to Edit menu > Writing Tools > Check Document Spelling.
I've never used anything (in a major way) except AppleWorks.
A couple of options which you haven't mentioned are Pages in _iWork '06_ (or earlier; the current version has left behind G3 processors) and _Microsoft Office for Mac_.
I'm unsure of how well any of these will integrate with Linux. Open Office may be your best bet there. (I'm just guessing. It seems like common sense to me that Open Office would work with an open OS like Linux.)
Another application which is creating a buzz and sounds like it could work for you is _Google Docs_. There would certainly be no problem with Linux integration there. It looks like it would be easy sharing all the way around and you shouldn't find any incompatibilities as long as you have a decently up-to-date browser.
I'm not sure anyone has developed the "perfect" word processor, but there are some good ones out there. Good luck on your quest.

Max Processor for T61P system?

Similar Messages

Maybe you are looking for