Max size CPU for 6156bx ?
Hi all,
I'm still playing about with the "old trusty" ms6156bx MoBo. The P3 650 cpu was working fine untill we had a lightning strike fairly close to home - fried the CPU. So had to resort back to the P2 400 ;( (MoBo & all else still working fine)
Question is, Does anyone know what the max size CPU this board can take ? I have the chance of getting hold of a P3 1 ghz 100 fsb cpu ,But not sure if Mobo could take it. Maybe an 800 would be better (if I can find one)
Any advice ???
Hi, to get a Tualatin to work on that mobo you need a FCPGA2 to Slot 1 converter, it is not very usual, perhaps you don´t have this slocket, one that it´s known is the Powerleap PL-IP3 or something like that, it supports Tualatin processors. Check if your converter supports Tualatin processors first, so you don´t burn a processor again!!!
AMD Athlon XP 2000+ T-bred A (near for a change)
ASUS A7A266 PCB 1.10 1012 BIOS (ALi M1647 AGP 4X) (near for a change)
1 stick of Elixir 256 MB PC2700U CAS 2.5 (266 MHz=CAS2 6-2-2)
MSI 8907-TD128 Geforce FX 5200 128 MB red PCB with cooler (aditional fan behind the chip)
Crystal SoundFUSION CS4281 4 channel PCI
Intel 56 K V.92 PCI
3Com Fast Etherlink XL 100 Mbps PCI
WD400BB 40 GB ATA100 7.2k rpm
2 X CD-ROM drives
Useless floppy drive
Medium Tower case with 2 fans, 300 W NOGA PSU
PSU currents:
+3.3 V= 28 A
+5 V= 30 A
+12 V= 15 A
+5 VSB= 2 A
Similar Messages
-
Revision: 13276
Revision: 13276
Author: [email protected]
Date: 2010-01-05 07:18:31 -0800 (Tue, 05 Jan 2010)
Log Message:
Min/Max size fixes for AIR Window and WindowedApplication.
AIR won?\226?\128?\153t allow you to set the min width greater than the current max width (same is true for height). You also can?\226?\128?\153t set the max width less than the current min width (same is true for height). The code that sets nativeWindow.minSize and nativeWindow.maxSize has been modified to take this into account.
QE notes: None.
Doc notes: None.
Bugs: SDK-24566
Reviewer: Corey
Tests run: checkintests, apollo/spark/components/Window.as, apollo/spark/components/WindowedApplication.as, apollo/Window, apollo/WindowedApplication
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24566
Modified Paths:
flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/Window.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
flex/sdk/trunk/frameworks/projects/airspark/src/spark/components/Window.as
flex/sdk/trunk/frameworks/projects/airspark/src/spark/components/WindowedApplication.asTHank you , Nancy. Appreciate the input.
So instead of this:
<a class="brand" href="index.html"><img src="../img/logo-ca.png"alt="Consumers Advocate Review"> </a>
Would it be something like this?:
<a class="brand" href="index.html"><img src="http://ConsumersAdvocate/img/logo-ca.png"alt="Consumers Advocate Review"> </a>
And if I do that, is there a way to cope with that locally so that DW can still display the images?
jeff -
What is the max supported CPU for MSI 865PE-NEO2-LS?
Can someone please tell me what is the max supported CPU speed for the MSI 865PE-NEO2-LS? I have a P4 2.8@800Mhz, but was told that with a BIOS upgrade this motherboard can achieve up to 3.2? Is that right, or can it support higher speeds such as the 3.4+
Thank you!Hello,
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=433&kind=1
I think A6728IMS.210 means BIOS 2.1 so it may already work with the 3.2Ghz CPU.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=433&kind=1 -
I've been through the commuity and on-line retailer pages and I'm confused by the variety of answers here. I know the max thickness must be 2.5." But some say 5400 RPM; others say 7200. Some say 1TB but show only 750GB.
Is iTB safe in this box? Overheating issues?
I've seen a Seagate Momentus 1TB from one retailer but can't find any trace of it at others or on the Seagate site.Hello,
The most important thing is that it be Serial ATA (1.5 Gb/s) compatible, there is no practical limit other than manufactured size in that form & speed.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
The 750 GB WD I checked was SATA 3 Gb/s. -
Data size bigger than max size for this type - DB Control
All,
We are using a Java Control to fetch and store data
- it fetches data from a webservice through a webservice control
- it stores data in to database using a database control (stores the data as BLOB)
Here currently we facing an error - weblogic.jws.control.ControlException: ControlException on control databaseManager[Data size bigger than max size for this type: 4516]
The data is definitely not overshooting the max capacity of BLOB which is 4 GB. Initially this process was overshooting the transaction time-out limit of 300 sec but currently this is well within the transaction time-out limit and error happens soon after the webservice returns the data.
a. Are there any known issues with using BLOB's with database controls ?
b. what are the options - if we face this error ?
weblogic.jws.control.ControlException: ControlException on control databaseManager[Data size bigger than max size for this type: 4516]
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(Ljava.lang.Object;Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(JcsProxy.java:454)
at $Proxy14.storeObject(Ljava.lang.String;Ljava.lang.Object;)V(Unknown Source)
at com.pfizer.usp.uspdb.businessobjects.people.peoplemanagercontrol.CacheManager.storeInCache(Lcom.pfizer.usp.uspdb.businessobjects.people.peopledatabasemanager.PeopleDatabaseManager;Ljava.lang.Object;Ljava.lang.Object;)V(CacheManager.java:158)
at com.pfizer.usp.uspdb.businessobjects.people.peoplemanagercontrol.PeopleServiceManagerImpl.getTurnoverModel(Lcom.pfizer.usp.uspdb.businessobjects.people.PeopleBaseVO;Z)Ljava.util.List;(PeopleServiceManagerImpl.jcs:1334)
at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(DispMethod.java:371)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Ljava.lang.Object;Ljava.lang.String;Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:423)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:396)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(Invocable.java:248)
at com.bea.wlw.runtime.jcs.container.JcsContainer.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(JcsContainer.java:85)
at com.bea.wlw.runtime.core.bean.BaseContainerBean.invokeBase(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(BaseContainerBean.java:224)
at com.bea.wlw.runtime.core.bean.SLSBContainerBean.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(SLSBContainerBean.java:103)
at com.bea.wlwgen.StatelessContainer_ly05hg_ELOImpl.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(StatelessContainer_ly05hg_ELOImpl.java:99)
at com.bea.wlwgen.GenericStatelessSLSBContAdpt.invokeOnBean(Ljava.lang.Object;Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(GenericStatelessSLSBContAdpt.java:62)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.runAsInvoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(BaseDispatcherBean.java:153)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(BaseDispatcherBean.java:54)
at com.bea.wlw.runtime.core.bean.SyncDispatcherBean.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(SyncDispatcherBean.java:168)
at com.bea.wlw.runtime.core.bean.SyncDispatcher_k1mrl8_EOImpl.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(SyncDispatcher_k1mrl8_EOImpl.java:46)
at com.bea.wlw.runtime.core.dispatcher.Dispatcher.remoteDispatch(Lcom.bea.wlw.runtime.core.dispatcher.DispFile;Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(Dispatcher.java:161)
at com.bea.wlw.runtime.core.dispatcher.ServiceHandleImpl.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Ljava.lang.Object;(ServiceHandleImpl.java:436)
at com.bea.wlw.runtime.core.dispatcher.WlwProxyImpl._invoke(Lcom.bea.wlw.runtime.core.request.ExecRequest;)Ljava.lang.Object;(WlwProxyImpl.java:326)
at com.bea.wlw.runtime.core.dispatcher.WlwProxyImpl.invoke(Ljava.lang.Object;Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(WlwProxyImpl.java:315)
at $Proxy12.getTurnoverModel(Lcom.pfizer.usp.uspdb.businessobjects.people.PeopleBaseVO;Z)Ljava.util.List;(Unknown Source)
at portlets.PeopleStaffing.StaffingController.begin()Lcom.bea.wlw.netui.pageflow.Forward;(StaffingController.jpf:356)
at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at com.bea.wlw.netui.pageflow.FlowController.invokeActionMethod(Ljava.lang.reflect.Method;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Lorg.apache.struts.action.ActionMapping;)Lorg.apache.struts.action.ActionForward;(FlowController.java:1519)
Caused by: java.sql.SQLException: Data size bigger than max size for this type: 4516
at oracle.jdbc.dbaccess.DBError.throwSqlException(Ljava.lang.String;Ljava.lang.String;I)V(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(ILjava.lang.Object;)V(DBError.java:179)
at oracle.jdbc.ttc7.TTCItem.setArrayData(Z[B)V(TTCItem.java:95)
at oracle.jdbc.dbaccess.DBDataSetImpl.setBytesBindItem(III[B)Z(DBDataSetImpl.java:2413)
at oracle.jdbc.driver.OraclePreparedStatement.setItem(II[B)V(OraclePreparedStatement.java:1166)
at oracle.jdbc.driver.OraclePreparedStatement.setBytes(I[B)V(OraclePreparedStatement.java:2208)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(ILjava.lang.Object;II)V(OraclePreparedStatement.java:3002)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(ILjava.lang.Object;I)V(OraclePreparedStatement.java:3107)
at weblogic.jdbc.wrapper.PreparedStatement.setObject(ILjava.lang.Object;I)V(PreparedStatement.java:244)
at com.bea.wlw.runtime.core.control.DatabaseControlImpl._setParameter(Ljava.sql.PreparedStatement;ILjava.lang.Object;I)V(DatabaseControlImpl.jcs:1862)
at com.bea.wlw.runtime.core.control.DatabaseControlImpl.getStatement_v2(Ljava.lang.reflect.Method;[Ljava.lang.Object;ZLjava.lang.String;)Ljava.sql.PreparedStatement;(DatabaseControlImpl.jcs:1708)
at com.bea.wlw.runtime.core.control.DatabaseControlImpl.invoke(Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(DatabaseControlImpl.jcs:2567)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(DispMethod.java:377)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Ljava.lang.Object;Ljava.lang.String;Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:423)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:396)
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(Ljava.lang.Object;Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(JcsProxy.java:388)
at $Proxy13.insertObject(Ljava.lang.String;Ljava.lang.Object;)V(Unknown Source)
at com.pfizer.usp.uspdb.businessobjects.people.peopledatabasemanager.PeopleDatabaseManagerImpl.storeObject(Ljava.lang.String;Ljava.lang.Object;)V(PeopleDatabaseManagerImpl.jcs:263)
at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Optimized Method)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(DispMethod.java:371)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Ljava.lang.Object;Ljava.lang.String;Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:423)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:396)
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(Ljava.lang.Object;Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(JcsProxy.java:381)
at $Proxy14.storeObject(Ljava.lang.String;Ljava.lang.Object;)V(Unknown Source)
at com.pfizer.usp.uspdb.businessobjects.people.peoplemanagercontrol.CacheManager.storeInCache(Lcom.pfizer.usp.uspdb.businessobjects.people.peopledatabasemanager.PeopleDatabaseManager;Ljava.lang.Object;Ljava.lang.Object;)V(CacheManager.java:158)
at com.pfizer.usp.uspdb.businessobjects.people.peoplemanagercontrol.PeopleServiceManagerImpl.getTurnoverModel(Lcom.pfizer.usp.uspdb.businessobjects.people.PeopleBaseVO;Z)Ljava.util.List;(PeopleServiceManagerImpl.jcs:1334)
at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)Sudeep SV wrote:
All,
We are using a Java Control to fetch and store data
- it fetches data from a webservice through a webservice control
- it stores data in to database using a database control (stores the data as BLOB)
Here currently we facing an error - weblogic.jws.control.ControlException: ControlException on control databaseManager[Data size bigger than max size for this type: 4516]
The data is definitely not overshooting the max capacity of BLOB which is 4 GB. Initially this process was overshooting the transaction time-out limit of 300 sec but currently this is well within the transaction time-out limit and error happens soon after the webservice returns the data.
a. Are there any known issues with using BLOB's with database controls ?
b. what are the options - if we face this error ?
Hi Sudeep. The problem is that WLW is trying to set the datum as a byte array
and the oracle driver won't take a byte array that big. Please check whether
WebLogic Workshop has any explicit instructions for BLOB data. Otherwise, do
contact official BEA support for your WebLogic WorkShop issue.
Joe
weblogic.jws.control.ControlException: ControlException on control databaseManager[Data size bigger than max size for this type: 4516]
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(Ljava.lang.Object;Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(JcsProxy.java:454)
at $Proxy14.storeObject(Ljava.lang.String;Ljava.lang.Object;)V(Unknown Source)
at com.pfizer.usp.uspdb.businessobjects.people.peoplemanagercontrol.CacheManager.storeInCache(Lcom.pfizer.usp.uspdb.businessobjects.people.peopledatabasemanager.PeopleDatabaseManager;Ljava.lang.Object;Ljava.lang.Object;)V(CacheManager.java:158)
at com.pfizer.usp.uspdb.businessobjects.people.peoplemanagercontrol.PeopleServiceManagerImpl.getTurnoverModel(Lcom.pfizer.usp.uspdb.businessobjects.people.PeopleBaseVO;Z)Ljava.util.List;(PeopleServiceManagerImpl.jcs:1334)
at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(DispMethod.java:371)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Ljava.lang.Object;Ljava.lang.String;Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:423)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:396)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(Invocable.java:248)
at com.bea.wlw.runtime.jcs.container.JcsContainer.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(JcsContainer.java:85)
at com.bea.wlw.runtime.core.bean.BaseContainerBean.invokeBase(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(BaseContainerBean.java:224)
at com.bea.wlw.runtime.core.bean.SLSBContainerBean.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(SLSBContainerBean.java:103)
at com.bea.wlwgen.StatelessContainer_ly05hg_ELOImpl.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(StatelessContainer_ly05hg_ELOImpl.java:99)
at com.bea.wlwgen.GenericStatelessSLSBContAdpt.invokeOnBean(Ljava.lang.Object;Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.dispatcher.InvokeResult;(GenericStatelessSLSBContAdpt.java:62)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.runAsInvoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(BaseDispatcherBean.java:153)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(BaseDispatcherBean.java:54)
at com.bea.wlw.runtime.core.bean.SyncDispatcherBean.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(SyncDispatcherBean.java:168)
at com.bea.wlw.runtime.core.bean.SyncDispatcher_k1mrl8_EOImpl.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(SyncDispatcher_k1mrl8_EOImpl.java:46)
at com.bea.wlw.runtime.core.dispatcher.Dispatcher.remoteDispatch(Lcom.bea.wlw.runtime.core.dispatcher.DispFile;Lcom.bea.wlw.runtime.core.request.Request;)Lcom.bea.wlw.runtime.core.request.Response;(Dispatcher.java:161)
at com.bea.wlw.runtime.core.dispatcher.ServiceHandleImpl.invoke(Lcom.bea.wlw.runtime.core.request.Request;)Ljava.lang.Object;(ServiceHandleImpl.java:436)
at com.bea.wlw.runtime.core.dispatcher.WlwProxyImpl._invoke(Lcom.bea.wlw.runtime.core.request.ExecRequest;)Ljava.lang.Object;(WlwProxyImpl.java:326)
at com.bea.wlw.runtime.core.dispatcher.WlwProxyImpl.invoke(Ljava.lang.Object;Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(WlwProxyImpl.java:315)
at $Proxy12.getTurnoverModel(Lcom.pfizer.usp.uspdb.businessobjects.people.PeopleBaseVO;Z)Ljava.util.List;(Unknown Source)
at portlets.PeopleStaffing.StaffingController.begin()Lcom.bea.wlw.netui.pageflow.Forward;(StaffingController.jpf:356)
at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at com.bea.wlw.netui.pageflow.FlowController.invokeActionMethod(Ljava.lang.reflect.Method;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Lorg.apache.struts.action.ActionMapping;)Lorg.apache.struts.action.ActionForward;(FlowController.java:1519)
Caused by: java.sql.SQLException: Data size bigger than max size for this type: 4516
at oracle.jdbc.dbaccess.DBError.throwSqlException(Ljava.lang.String;Ljava.lang.String;I)V(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(ILjava.lang.Object;)V(DBError.java:179)
at oracle.jdbc.ttc7.TTCItem.setArrayData(Z[B)V(TTCItem.java:95)
at oracle.jdbc.dbaccess.DBDataSetImpl.setBytesBindItem(III[B)Z(DBDataSetImpl.java:2413)
at oracle.jdbc.driver.OraclePreparedStatement.setItem(II[B)V(OraclePreparedStatement.java:1166)
at oracle.jdbc.driver.OraclePreparedStatement.setBytes(I[B)V(OraclePreparedStatement.java:2208)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(ILjava.lang.Object;II)V(OraclePreparedStatement.java:3002)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(ILjava.lang.Object;I)V(OraclePreparedStatement.java:3107)
at weblogic.jdbc.wrapper.PreparedStatement.setObject(ILjava.lang.Object;I)V(PreparedStatement.java:244)
at com.bea.wlw.runtime.core.control.DatabaseControlImpl._setParameter(Ljava.sql.PreparedStatement;ILjava.lang.Object;I)V(DatabaseControlImpl.jcs:1862)
at com.bea.wlw.runtime.core.control.DatabaseControlImpl.getStatement_v2(Ljava.lang.reflect.Method;[Ljava.lang.Object;ZLjava.lang.String;)Ljava.sql.PreparedStatement;(DatabaseControlImpl.jcs:1708)
at com.bea.wlw.runtime.core.control.DatabaseControlImpl.invoke(Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(DatabaseControlImpl.jcs:2567)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(DispMethod.java:377)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Ljava.lang.Object;Ljava.lang.String;Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:423)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:396)
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(Ljava.lang.Object;Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(JcsProxy.java:388)
at $Proxy13.insertObject(Ljava.lang.String;Ljava.lang.Object;)V(Unknown Source)
at com.pfizer.usp.uspdb.businessobjects.people.peopledatabasemanager.PeopleDatabaseManagerImpl.storeObject(Ljava.lang.String;Ljava.lang.Object;)V(PeopleDatabaseManagerImpl.jcs:263)
at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Optimized Method)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(DispMethod.java:371)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Ljava.lang.Object;Ljava.lang.String;Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:423)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Lcom.bea.wlw.runtime.core.dispatcher.DispMethod;[Ljava.lang.Object;)Ljava.lang.Object;(Invocable.java:396)
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(Ljava.lang.Object;Ljava.lang.reflect.Method;[Ljava.lang.Object;)Ljava.lang.Object;(JcsProxy.java:381)
at $Proxy14.storeObject(Ljava.lang.String;Ljava.lang.Object;)V(Unknown Source)
at com.pfizer.usp.uspdb.businessobjects.people.peoplemanagercontrol.CacheManager.storeInCache(Lcom.pfizer.usp.uspdb.businessobjects.people.peopledatabasemanager.PeopleDatabaseManager;Ljava.lang.Object;Ljava.lang.Object;)V(CacheManager.java:158)
at com.pfizer.usp.uspdb.businessobjects.people.peoplemanagercontrol.PeopleServiceManagerImpl.getTurnoverModel(Lcom.pfizer.usp.uspdb.businessobjects.people.PeopleBaseVO;Z)Ljava.util.List;(PeopleServiceManagerImpl.jcs:1334)
at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source) -
Data size bigger than max size for this type
First, I'd like to thank you for release 1.2.1, it works like
a charm! Keep up the good work. Here are my questions:
1. When parsing a stored procedure, I get the message "Data
size bigger than max size for this type". Can you tell me what
causes this?
2. Is there any list of all the error messages that can be
given by Migration Workbench?
Thank You,
Shane Brubaker
nullShane,
With respect to your questions :
1. Could you possibly send [email protected] (that is
our helpdesk, a direct line into development) a little more
information about what you were doing. Also, if you could
send us the stored procedure in question (no data required)
then we could try to reproduce the error in-house and better
evaluate what is going on.
2. The majority of errors ORA-**** are actually generic
Oracle errors and can be found in the Server documentation.
As for our specific errors most parser messages can be
found in the appendix "Parser Reference" from the help system.
Regards,
Marie
===
Shane Brubaker (guest) wrote:
: First, I'd like to thank you for release 1.2.1, it works like
: a charm! Keep up the good work. Here are my questions:
: 1. When parsing a stored procedure, I get the message "Data
: size bigger than max size for this type". Can you tell me what
: causes this?
: 2. Is there any list of all the error messages that can be
: given by Migration Workbench?
: Thank You,
: Shane Brubaker
Oracle Technology Network
http://technet.oracle.com
null -
Exchange 2013 with Outlook 2013 - Not getting pop-up or mail tips for attachments exceeding max size
Our environment is Exchange Server 2013 CU3 and Outlook 2013 in cached mode. We have a transport rule that sets the max attachment size to 20 mb.
If someone sends an attachment larger than 20 mb they receive an NDR letting them know the message wasn't delivered because it exceeded the max attachment size. We would like for the user to be prevented from sending the message at all or to at least
get a mail tip before they try to send the message. The Outlook pop-up message that says "The file you're attaching is bigger than the server allows. Try putting the file in a shared location ..." isn't being generated for us. Not sure if that's
because we're running Exchange or not. If that pop-up isn't going to work it would be nice if the user could at least get a mail-tip warning them that the attachment exceeds the limit. But it doesn't look likes there's a mail-tip for attachment size, only
for message size. And, I've found that the message size mail-tip only works if the limit is set on the user. It doesn't seem to work if the limit is set via a transport rule.
Has anyone else gotten Outlook to present the pop-up or a mail-tip when exceeding attachment size? Any help you can offer would be greatly appreciated.Thanks but I performed all of those trouble shooting prior to posting to the forum. But, I have found the answer!
After referring to this article;
http://technet.microsoft.com/en-us/library/bb124345(v=exchg.150).aspx
I removed the 10mb default limits from the organization config and chose to set the attachment and message size limits in our environment via transport
rules instead. That is the only way you can actually set an attachment size limit.
I had read this article several times searching for an answer;
http://support.microsoft.com/kb/2813269#appliesto
The key is here;
"If you are using an Exchange Server account, the 20-MB attachment
limit for Internet email accounts is not used by Outlook 2013. Instead, Outlook uses the limit that is configured on your Exchange server. To modify the setting that is used to control the size of a message that is sent through an
Exchange Server account, follow these steps."
The steps that follow are for Exchange 2010 but they show setting organization limits not server limits. And note that it
says the size of a message, not the size of an attachment. Since mail-tips for message size are not displayed when the limit is set via the transport rules I thought it
was possible that the same inconsistency might apply to the attachment pop-up warning. I set the organization limits and voila! The pop-up now displays when an attachment that exceeds the message size limit is added to a message.
This is exactly what I wanted. Now users won't fill up their sent items trying to send large attachments that just bounce anyway.
It would be wonderful if Microsoft would provide information about what features of Outlook are affected when you apply message size limits at the
various levels. -
From 1 DB:Data size bigger than max size for this type
I am getting error while inserting text file as a string in the table (oracle DB)as :java.sql.SQLException: Data size bigger than max size for this type: 11412
This particular column is Long data type.
The mystry is there is: In one DB instance the code is working fine without error but in other DB instance its giving the following Error:
(CMessageLog.java:118) java.sql.SQLException: Data size bigger than max size for this type: 11412
at oracle.jdbc.dbaccess.DBError.throwSqlException(Ljava/lang/String;Ljava/lang/String;I)V(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(ILjava/lang/Object;)V(DBError.java:179)
at oracle.jdbc.ttc7.TTCItem.setArrayData(ZLjava/lang/String;I)V(TTCItem.java:147)
at oracle.jdbc.dbaccess.DBDataSetImpl.setBytesBindItem(IIILjava/lang/String;)Z(DBDataSetImpl.java:2460)
at oracle.jdbc.driver.OraclePreparedStatement.setItem(IILjava/lang/String;)V(OraclePreparedStatement.java:1190)
at oracle.jdbc.driver.OraclePreparedStatement.setString(ILjava/lang/String;)V(OraclePreparedStatement.java:1610)
at weblogic.jdbc.wrapper.PreparedStatement.setString(ILjava/lang/String;)V(PreparedStatement.java:638)
Can anyone please help me out.
Thanks,
Joydeep MaitiYes Rajat . Your are right
I have pasted the code below. I am using "String" to hold the message (strQueueMessage). That should be the problem
Pls let me know How should I overcome this problem.
public void dbWriteLog(String strQueueMessage,
ExtractionEngineDetails objExtractionEngineDetails,
QueryBuilder objQueryBuilder) throws DBException
objPrepStatement.setString(1,strQueueMessage);
objPrepStatement.setDate(2,new Date(new java.util.Date().
getTime()));
objPrepStatement.setString(3, ExtractionUtils.getProperty(
ExtractionUtils.EXT_FAIL_TYPE2));
objPrepStatement.executeUpdate();
objPrepStatement.close();
stmt = conn.createStatement();
Thanks
Ashwin N. -
Max Size for a message thru SAP PI 7.0 SPS13
Hi,
I have a problem with a very large message. The scenario is a JDBC -> SAP PI -> ABAP Proxy. I'm getting this error:
ErrorTransmitting the message to endpoint http://<server>:8000/sap/xi/engine?type=entry
using connection JDBC_http://sap.com/xi/XI/System failed, due to:
com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: Error writing to server.
We try to solves it changing the EO_MSG_SIZE_LIMIT parameter in SXMB_ADM but it doesn't help us at all.
How can we set the max size for a message that going thru SAP PI.
We have SAP PI 7.0 SPS 13.HI Luis
Whats the message size and whats the value you have given in EO_MSG_SIZE_LIMIT. After saving this parameter did you verified at RWB ->RWB->Component Monitoring->Integration Engine->
Settings->Tuning
Add one more EO_INBOUND_TO_OUTBOUND this will allow data not to be placed on Outbound queue and bring to inbound queue. This is having advantage that to process high volume message you will get better performance but disadvantage is when there is no receiver inbound queue is blocked.
It can be a issue related to connection. Please check with the RFC you have for proxy and IE RFC's
Thanks
Gaurav
Edited by: Gaurav Bhargava on Nov 22, 2008 11:44 PM -
Maximum count of messages, and average/Max size of the messages for a retry
I like to know what will be the maximum count of messages, Average/Max size of the messages that a retry queue can handle andhow it’s is handled in OSB/Admin console and also the CPU and other Infra Structure requirements to support this scenario
The below link has some explanations but not a detailed one
Max file size OSB 11g can process -
SqlEjava.sql.SQLException: Data size bigger than max size for this type: 5200
can any one help how to resolve this errorIm using clob object I want to insert more data
how to insert more data -
Getting error "Data size bigger than max size for this type"
Hi,
I'm getting the error "Data size bigger than max size for this type: 122446" when am uploading the RTF template. RTF template size is 831 KB. Can anyone let me know what is the maximum size that an RTF template should be.
ThanksHi,
Can you please let me know what could be the reasons for encountering the error. Am struck with this issue.
Thanks. -
ORA-17070: Data size bigger than max size for this type error
Hi,
While importing the mapping from one location to another location, I am getting the error ORA-17070: Data size bigger than max size for this type. Can anyone help me on this.
PaulThis error occurs when the incoming data is larger than the size of the column in the expression operator. Solution for this is that you need to set the datatype to that of the source and give in the appropriate size in the expression properties.
If it is conversion to number (for example) from character then set the datatype to Number and specify the size to 30 or 40 or depending upon the size of the incoming data.
For any datatype you can set the size till 9999 characters. It worked for me although my source was not as big as yours. I havnt experimented anything larger as this.
I hope this is what you were looking for.
If you are able to solve this, please post it here. I may need it at some point of time in the future.
Regards
Vibhuti
Message was edited by:
Vibhuti_Devatraj -
Error: Data size bigger than max size for this type: 4774
Hi all,
I am using Oracle 8.1.7.I am having long datatype in one table.I installed Oracle 9i jdbc driver( ojdbc14.jar) file and using it .When i try to submit the form from web it is giving the following error
java.sql.SQLException: Data size bigger than max size for this type: 4774
The same thing worked if i use Oracle ODBC driver.
Regards
VasuHi,
Can you please let me know what could be the reasons for encountering the error. Am struck with this issue.
Thanks. -
Max size for integer and number;
Hi,
its said that the maximum precision for a number is 38.
but the below code does execute....
declare
a number;
begin
a := 111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111;
end;
The same if i declare a as integer will fail during execution
Any ideas plz
Thanks<FONT FACE="Arial" size=2 color="2D0000">
max size of integer in oracle 10g
This fails because
INTEGER
This ANSI datatype will be accepted by Oracle - it is actually a synonym for NUMBER(38)
-SK
Edited:
</FONT>
Maybe you are looking for
-
First movie download report...
Yesterday I successfully downloaded my first movie from iTunes directly to my HD and this evening we watched it on my 40" Sony. I was very impressed with the quality of the video considering the source. My hardware for this was a MacBook with 4MB. I
-
Error when creating connection to oracle db using Designer
Hi guys, Iu2019m trying to create a new connection to an oracledb but keep getting the error u201Cdbd_oci file, specified procedure could not be foundu201D. Following is the installed software; u2022 Oracle 10g u2022 Oracle client 10g running
-
Macbook purchased in June acting possessed, not sure what else I can do.
SPECS: MacBook Pro, 2.5GHz Intel Core i5 4gb 1600MHx DDR3 RAM, 500gb HDD running OS X 10.9.4 Okay, so my family purchased me a new MacBook back in June, after my other one died after nearly 5 years. Right out of the box I had problems with it. When
-
Sun Communications Suite 6 U2 Training Workshop coming to USA
JavaWorkshops.com is going to have 9 public classes over the next few months in the USA. I just wanted to pass this along. I was luck enough to attend their Directory Workshop in London and it was amazing. The instructor is a former Netscape professi
-
PROBLEM WITH REUSE_FIELDCATALOGUE_MERGE
HI, HELP ME WITH THIS FUNCTION MODULE IT IS NOT GENERATING ANY FIELCATALOGUE WHAT IM DOING WRONG type-pools:slis. tables:mara. data:BEGIN OF IT_MARA OCCURS 0, MATNR type MARA-MATNR, MBRSH type MARA-MBRSH, MATKL type MARA-MATK