Max speed for 645 ultra?

What is the max processor speed for the 645 ultra? The manual says can support from 1.5 to 2.0ghz and up. How high does the "up" go. Would I be able to get the new 3ghz processor when it comes out? Right now I have a 1.6ghz (overclocked to 2.02ghz) and want a higher speed...
(oh yeah, I have the MS-6547 version 1)

http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=43%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6547
not sure on 3.0 one way or other myself

Similar Messages

  • How do I set-up my memory amount for max speed for FCP and Motion

    Hey all, I have a Dual 2.3 G5 with (8 Gigs) Ram. I'm working with a new client. I want to set up my memory or whatever else to provide MAXIMUM processing power for FCP and MOTION. Does anyone have any recommended settings. I've maxed-our RAM. My card is (ATI Radeon 9600-128MB of VRAM)
    Is there a setting in FCP that allows more processing power to be applied to that application ?
    Appreciate any replies

    Most of FCP's speed in performing functions is directly related to processor speed. The only way to increase performance would be to use a Mac with faster processors. Performance is also related to data throughput, so if you're working with high data rate video formats, a fast RAID and/or SATA (or eSATA) media storage solution would help.
    The exception to FCP performance is when rendering/processing FX Plugs; they are dependent on the power of the graphics card.
    Motion is mostly dependent on the power of the graphics card.
    There is no way that I'm aware of that you can speed up RAM. Having the extra RAM will just mean that you can successfully work with more applications open at the same time.
    -DH

  • Max speed for scroller wheel

    I am using this scroller wheel and a weird things seems to
    happen. When
    you click over on the masthead image to the left of the swf,
    it goes
    really fast! That part is not even Flash file anymore. Is
    that something
    that can be caped? How can this be?
    File is here:
    http://www.diversenet.com/new/
    The speed inside the file gets set like so:
    this._visible = true;
    // speed at start
    var speed=.5;
    // speed by mousemove
    if ((_root._ymouse<100) || (500<_root._ymouse)) {
    speed = speed*0.9;
    } else {
    speed = (0-_xmouse)/150;
    Is there a way to create a maxspeed that the file will not go
    beyond?
    And why could clicking outside the file affect the file?
    Thanks for any help!
    Brian

    http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=43%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6547
    not sure on 3.0 one way or other myself

  • Max speed for Airport Extreme??

    I just connected with Verizon Fios (fiber) and have 15mb down and 2 mb up speeds. I have verified the speed with an XServe directly attached to the router.
    The airport extreme serve the rest of the house. I have yet to see speeds exceeding 3.5 mb once it goes thru the airport.
    Am I missing something in a setup??
    Or is there a limit to speeds??

    OK. So is there a setting I can use to beef up the
    speed? I'm about 75' away from the base but also
    using 2 Express Stations as extenders.
    I actually connect to one of the Express Stations as
    I get a full signal.
    With this kind of configuration you can get a maximum
    throughput of:
    - with only 802.11g (Extreme): 22 Mbit/s / 4 = 5.5 Mbit/s
    - with 802.11b: 5.5 Mbit/s / 4 = 1.5 Mbit/s
    (Here I'm speaking of throughput at a user level, for
    exemple with an FTP directly wrom one of your computers
    to the next).
    You may improve this by suppressing the 2 network
    extenders (they eat their share of the bandwidth).
    Then by using only 802.11g.
    Don't forget to check out that you don't have any
    neighbour's interfering network. They may interfere with
    your own network without completly droping it.
    dan    

  • Max speed for Autoflip in Acrobat?

    Hi!
    I need to scan a few pdf documents at fast speed as part of my work. I set the Auto Flip speed to 0.02 seconds in page transitions. Is this speed too fast for a 60Hz monitor? Will Acrobat be able to display all pages at this speed or will it miss some pages out? Also, is there a drop in quality this way or will all the images and text be catched and displayed in full quality at 0.02sec autoflip speed?

    Did you try it?

  • MS-6547E Ver.1, 654E Max-c, MS6547 Ver.1, 645 Ultra

    I have a Motherboard that had a red sticker on it listing 645E Max-C and MS-6547E Ver.1
    I peeled it off and underneath it has 645 Ultra and MS6547 Ver.1
    The BIOS lists MS-6547SMS 1.6 in the Startup Screen.
    When I run "MSIHQ USB Bootable Tool and BIOS Helper" It lists the Board as 6558 and the BIOS as something totally different from what I've ever seen as a bios.
    I figured that I could probably download the MS-6547 1.9 BIOS (The most updated version) and easily Flash the BIOS, but that has not been the case.  Every time I get to AMIFL847 and try to flash it, the message tells me that the new BIOS file is not a BIOS file, and is unknown.  I've downloaded it at least 3 times now (thinking it was a corrupt download) each time is the same result.
    I've tried to use Live Update 5 which is supposed to work with this board, and it gives me a message that I have the latest BIOS, or when I point to the BIOS file MS6547.190, it tells me that this is anything BUT a BIOS file.
    I even have been getting BSoD (Blue Screens of Death) in which the codes are telling me the problem lies with a MSILiveUpdate5 file dealing with the BIOS.
    Any help would be greatly appreciated.

    Do you really need to update BIOS? If you do, don't use LiveUpdate!
    There are a few to choose from: http://www.msi.com/service/search/?kw=6547&type=product
    You should also be warned, that the motherboard may have been specially built to suit for example Dell or HP, or another major computer system builder. If so you do not use data and BIOS:es from here, but from that manufacturer.
    With that warning in mind, this would be the best bet, I believe:
    http://www.msi.com/product/mb/645-Ultra.html#/?div=BIOS

  • Max write speed for CD-RWs with HL-DT-ST DVD-RW GH41N drive?

    hey all,
    I've had a look online, but I can't find the answer.
    Does anyone know where I can find the max write speed using CD-RWs, with the HL-DT-ST DVD-RW GH41N CD/DVD drive that's in my Mac Pro?
    Looking into getting some faster CD-RWs (10-16x), want to make sure my Mac Pro's drive can actually burn them at this speed first.
    cheers
    Sam

    apparently, it can burn up to 32x speed for CD and CD-RW discs:
    http://discussions.apple.com/thread.jspa?messageID=12513651

  • Power supply for MSI 645 Ultra mother board

    I need to replace the power supply for a MSI 645 Ultra mother board. I've available a switching power supply Allied model DR-B500E, that doesn't have the -5V output (infact its 20 pin ATX power supply connector has no wire in pin 18).
    Can I use this power supply with the MSI 645 Ultra?
    Thanks in advance for any help.

    Hi, here I am. Sorry for delay but I had some problems with the PC (as NTLDR missing).
    However now is ok and I can confirm that it runs ok also with power supply without -5V output.
    Thanks a lot for the support and best wishes for Christmas and new year.

  • MSI 645 Ultra Dead Mobo

    First a little background...
      Bought a new MSI 645 Ultra (version 1.0) about 4 months ago.  Installation of the new mobo, new memory, new video card, and new CPU went just fine.  
      It's been running very stable for the past 4 months, but two days ago I rebooted (warm) and the machine wouldn't even POST!  Hard drive and CD-ROM power up but I don't even get to the BIOS...
      I didn't change anything.  CPU is not overclocked.  I haven't added any hardware since the day I put it together.  I haven't tried flashing the BIOS.  I just rebooted and I get an Early Chipset Initialization error on the D-Bracket.
    Things checked so far...
      I have verified that the memory is still good.
      I have verified that the hard drive is still good.
      I have verified that the video card is still good.
    Things NOT checked so far...
      I have NOT verified that the CPU is still good.
    Things attempted to fix the problem so far:
      I have pulled the memory and booted without it... no change
      I have cleared the CMOS, no change: procedure follows:
        Unplugged power cable,
        Pressed power switch several times,
        Set jumper to "clear" position
        Removed CMOS battery for 2 hours,
        Re-installed CMOS battery,
        Put jumper back to original position,
        Plugged power cable back into computer.
      I have reseated the memory... no change
      I have reseated the video card... no change
      I have unplugged hard drive, cdrom, and floopy from the mobo... no change
      I have taken out the modem... no change
    System configuration:
      Intel P4 1.7GHz CPU
      MSI 645 Ultra version 1.0 mobo
      512MB DDR333 (1 stick)
      nVidia GeForce3 128MB video card
      3.5 floopy drive
      Western Digital 40GB IDE hard drive
      32 speed CDROM
      56K modem
    Is there something that you guys can recommend to fix this problem!?
    Did my bios somehow fry itself when I rebooted? Remember: I'm not getting to the bios at all... no POST... no nothing...!    ?(
    Thanks

    Hey dude, try this first. I had 2 648 Max's today. Neither of them would boot. Cpu's good, memory good. PSUs good. Dude, I was pulling my hair out, argh......
    Then what I did was removed all the pin connectors for the Power Switch, Hard Drive LED, Reset SW. I left the speaker connected. I cleared the CMOS. Took a small screw driver and jumped the two power pins. And walla! The thing started up and was able to get into the BIOS.
    Man, I ate a scooby snack and did a little more investigating and low and behold it was a bad Reset Switch that prevented it from booting.
    This is almost the exact sme sysmptoms your talking about. A similar one I had about two months ago was a bad power switch. It was just arely making contact not allowing the board to start, but all the fans etc... would work.
    So add this to your trouble shooting and maybe this will work.
    Scooby Dooby Doo! 8)

  • 645 Ultra Memory Limitation?

    I've had the 645 Ultra board for about 3 years now and I've had no problems running with 756MB of memory, one 512MB double-sided module and one 256MB double-sided module.  I received another 512MB single-sided module for Christmas (from Crucial, using their selector) and I've been unable to use it in my system.  It either reboots spontaneoously or else I receiver an error that says "can't write data 0xXXXXXXXX to location 0xXXXXXXXX can't 'write' the location"  or else it says the same thing except it can't read instead of write.  The memory location changes each time.  I got another 512MB module that is double-sided but I still encounter the same problem but it seems more stable.  I've set the BIOS to manual 100MHz FSB with 3:4 Memory ratio at 266MHz.  I set CAS at 2.5T.  The AGP size is 128MB.  It seems that any amount of memory over 756MB does not work.  Anyone else have a similar problem?  I've read many of the forum issues but none seem like mine.
    1.6GHz Pentium 4
    MSI 645 Ultra 1.0 Motherboard BIOS 1.9
    MSI Ti200 GeForce 3 with 64MB RAM
    1.2GB DDR running at 266MHz
    80GB IBM Harddrive
    20GB IBM Harddrive
    1GB Jaz Drive
    CDROM
    CDRW
    SiS IDE driver 2.03.02.00
    SiS AGP driver 7.2.0.1170

    I had same problem...
    I had 2 x 256 twinx llpt 3200 from corsair, no problem, running verry aggrssive timings and turbo timing.
    added a 512 stick XLPT (faster still) and system would only boot at safe timing setting and cas2.5, with delay1T (2T)
    I posted question on asktheramguy, corsairs very own and very responsive specialist, and he put it down to excessive load on the memory controller.
    Also if you have different memory manufactures mixed in the slots, that's even worse, and you may not get the system to boot even after relaxing the timings
    maybe lower speed 2100's and relaxd timing would be OK, but not much use with todays games
    Or set memory timings to safe in bios...
    So i bought another 512 3200XLPT stick and am selling the TwinX 2x256 LLPT's.
    Well, I'm at 1gig at present 2 x 512 PC3200 XLPT (little over kill but fast).
    With mem ratio set correctly and with my overclock this is running at about 380 Mhz (not the rated 400Mhz).
    So upshot is, you'll need to get better ram, get a mached pair, and if your not bothered abour raw memory speed get something mid range cas 2.5 say....

  • Help with the MSI 645 Ultra!

     I've got a very frusturating problem. I just bought the MSI 645 ultra mobo to upgrade my system, along with a brand new P4 2.0 GHZ processor and 512 mb DDR ram to go onto the board. My problem is as follows: The computer is not booting up. No OS, no BIOS, no nothing. When I turn the power on and hit the switch, all the hardware in the case starts up and sounds fine... but the screen remains blank. All four lights on the little diagnostic tool/usb port thingy that came with the board stay red, which, according to the manual, indicates a problem with the processor.
    The processor is either bad (highly unlikely with it being an Intel chip) or for some reason its not working with the mobo. So, heres my question: Does an Intel P4 2.0 GHZ Northwood processor work with the MSI 645 Ultra?
    Under the list of supported speeds, 2.0 ghz is not listed ?( . Can anyone tell me whats going on here?

    Quote
    Originally posted by Confused_Bystander
     I've got a very frusturating problem. I just bought the MSI 645 ultra mobo to upgrade my system, along with a brand new P4 2.0 GHZ processor and 512 mb DDR ram to go onto the board. My problem is as follows: The computer is not booting up. No OS, no BIOS, no nothing. When I turn the power on and hit the switch, all the hardware in the case starts up and sounds fine... but the screen remains blank. All four lights on the little diagnostic tool/usb port thingy that came with the board stay red, which, according to the manual, indicates a problem with the processor.
    The processor is either bad (highly unlikely with it being an Intel chip) or for some reason its not working with the mobo. So, heres my question: Does an Intel P4 2.0 GHZ Northwood processor work with the MSI 645 Ultra?
    Under the list of supported speeds, 2.0 ghz is not listed ?( . Can anyone tell me whats going on here?
    ANy beep?

  • Ms-645 ultra (MS-6547) CPU:RAM

    Hullo,
    I Just Finished building my new system. I am in the process of clocking it out. I used Fuzzy Logic 4 to find out at what speed my system crashes at. Fuzzy crashes any where between 139MHz & 143MHz system clock with CPU core voltage only slightly juiced to 1.5 volts.
    This is probably not a good program for the actual overclocking from what I've read, but does serve as a good burn in utility. So I've decided on a 133MHz system clock in bios. Don't want to get too greedy right now as I am using stock H/S and fan. Next did a 5X burn in with Sandra and couldn't crash my system 49c idle 62c load. I must say this is a very nice mobo, extremely stable.
    What I am having problems deciding on are my memory timings. This is my first MSI mother board and I'm not really familiar with the normal fast ultra and turbo settings.
    Initially I set at the normal selection with CPU - RAM ratio at highest setting of 4:5 and CPU-Z gives me these memory numbers 166MHz & 2.5-3-3-7-11.    
    Next I tried the ultra setting and the highest ratio of 1:1 any other ratio causes system to lock up. CPU-z gives me these memory numbers 133MHz 2.5-2-2-6-9
    It dosen't Appear that the Ultra timing mode offers any advantages over default memory timing settings. Are these words "Ultra" and "turbo" just marketing schemes meant to entice the common PC user, or are there some additional speed settings that go along with with the ultra and turbo modes that I am unaware of. Also after setting system clock to 133MHz My PCI & AGP are left untouched at 33MHz & 66MHz. I was expecting higher speeds. How are these independant? Where can I adjust these to clock along with the system clock. With those AGP & PCI numbers it behaves like a true 533MHz FSB system. I'm a little baffled with this new system. Any explainations would be greatly appreciated.
    MSI 645 Ultra (MS-6547 bios ver. 1.0)
    Channel Watt Tech. 350w Power Supply
    P4 Northwood 2.4(400FSB)@3200
    1 Stick 512MB Kingston PC-2700([email protected])
    Western Digital 80GB 7200 RPM 8MB Cache
    Sony CD/RW 52X
    Samsung CD ROM 40X
    Sound Blaster PCI512
    GeForce MX/MX 400 (PCI Slot)
    Yahama YST-MS50 (Powered Multi Media Speakers)
    HP Deskjet 656C
    Windows XP Pro SP-1

    I'm not displeased, only a little puzzled. in fact i was counting on having to reduce the core & memory speed of my card just a little bit. to allow for a higher oc. Is this a 400/533 mobo manual says 400. Hmmm. I wonder what would happen if I put an 800 FSB cpu in here. bios system clock goes to 200. I happen to have one. this mat be interesting.  

  • 645 Ultra OR 645EMax?

    I have purchased and installed a motherboard from MSI.
    Unfortunately it has a problem - it intermittently will not pass beyond the 3rd stage of the LED warnings ( Memory Detection Test ).  I have changed the RAM and it is fine.
    I am confused as to its identity, since on the mother board it has various markings:
    645 Ultra
    MS- 645EMax  ( however the 645EMax is stuck onto the motherboard.
    N 1996
    D33008
    Bar code on right hand side says - 2620023509
    The BIOs rom has the following marks:  AMI BIOS - 686 - 1999 - BK26 - 4537
    It also has an orange MSI-DDR chip near the processor and a SiS 961 chip to the south ( PM01014 - 0214IA )
    CAN YOU TELL FROM THIS WHAT MY BOARD IS PLEASE.
    The only place I can find a reference to a problem with booting is in BIOS Ver. 1.5 of the 545Ultra - where there is a fix for "Fixed after resume from S3, power button cannot work."
    I have applied this but it still has problems.  Can you help please??

    Sounds like my board:
    ms-6547 v1.0... 645dx max c
    333 mhz DDR
    133 ATA
    I know from previous posts that there is alot of
    confusion about the difference between thr
    Ultra and MaxC...the MaxC is a souped-up
    ultra and has the same markings except the
    sticker that says Max.

  • MSI 645 Ultra + FX5600 G-Card

    Will the MSI 645 Ultra Motherboard take a FX5600 VTDR Graphics card. Any issues with this combo would be apprciated.
    I'm looking to upgrade and the 5600 VTDR looks a good start to get the FX features in place with a top spec card. :D :D :D

    Hey dude, try this first. I had 2 648 Max's today. Neither of them would boot. Cpu's good, memory good. PSUs good. Dude, I was pulling my hair out, argh......
    Then what I did was removed all the pin connectors for the Power Switch, Hard Drive LED, Reset SW. I left the speaker connected. I cleared the CMOS. Took a small screw driver and jumped the two power pins. And walla! The thing started up and was able to get into the BIOS.
    Man, I ate a scooby snack and did a little more investigating and low and behold it was a bad Reset Switch that prevented it from booting.
    This is almost the exact sme sysmptoms your talking about. A similar one I had about two months ago was a bad power switch. It was just arely making contact not allowing the board to start, but all the fans etc... would work.
    So add this to your trouble shooting and maybe this will work.
    Scooby Dooby Doo! 8)

  • Need help setting up MoCa for superior speed for upstair room in house

    Hey guys i need some help. I just upgraded my plan to the 50/20 Fios and now i really want that speed upstairs to my gameroom. Before i had the 10/2 plan where wireless was sufficient (i could get 9mpbs download speed wirelessly everywhere i needed internet using the mi424wr)
    But now this crappy (no offense ) router is just not sufficient for the 50mbps download speed. Even if my laptop is RIGHT NEXT to the router, i only get max speed of 20 - 23mpbs download. Whereas if im connected via ethernet, i get the full 50+Mbps download speed. For some reason the upload speed is fine at over 20mpbs. (Anyone has any explanation for this? If other 2.4ghz devices were causing interferences, shouldnt the upload speed be affected also?) And Yes, i have changed the channel to 11 (every other wifi network is on 6)
    I also have this hawking high gain antenna connected to the router: http://www.newegg.com/Product/Product.aspx?Item=N82E16833164156
    In any case i feel that MoCa would be a much cheaper and more reliable approach to achieve better speeds compared to buying a wireless n dual band router & adapter
    Currently i have the ONT connect to the WAN Router VIA Coax
    I also have Dish network for Tv services with the STB upstairs (same room where i want the Ethernet from MoCa to connect to PC,PS3). Not sure if relevent, but the dish is set up so that my downstair tv has acces to Dish tv VIA the coax connected to the STB upstairs. So ONE STB provides TV upstairs AND TV downstairs with dish services via Coax.
    From the various articles i have read, this is my understanding of what i should do but of course im a newbie so i need your suggestions. I should add splitter the coax coming out of the ONT and connect one split to the router and the other split to the wall? then upstairs add a splitter to the coax connection from the wall and split one for dish STB and split one for MoCa actiontec which will then be connect to the internet and i could run ethernet from MoCa actiontec to ps3 and PC.
    Is that anywhere even close to a working solution or im just dreaming that it would this easy? lol
    Thanks for all the help!

    mominn8266 wrote:
    The actiontec router is b/g mode only and I've changed it from mixed to g only. I wish they had upgraded my router with the services but nope still have the crappy actiontec router.
    If you read my post I've already changed the channel most appropriate for me.
    I've also read that post about interferences but if im literally ONE feet away from the router, I should atleast get above 40 mbps download speed. Why is my upload speed above 20mbps but Download speed can't exceed 23mbps?
    Is there a possible solution for moca to coexist with dish services? A special splitter to seperate both lines? Or is powerline my only option?
    Keep in mind, with Wireless you're limited by the fact that it is also a Half Duplex connection by design (can only send OR receive on a radio, can't do both like you can on Full Duplex Wired connections) which reduces speeds, and also protocol overhead which increases as you add additional devices to an access point.and increase traffic in a broad scale. So, if you're getting 22-25Mbps on Wireless G, that's about all you're going to get from it. 54Mbps is a theoretical limit with the assumption you've cut down all overhead, have a full duplex connection and are not encountering noise.
    I recall seeing something on DSLReports about using MoCa with a Satellite TV provider, and it involved a lot of filtering within the coaxial to work. Ideally, you're best using a dedicated line for Coaxial if you're going to use MoCa to cut down on the complexity and risks caused by using a satellite system's coax.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

Maybe you are looking for