Max speed support on serial 2503

Hi All,
I have a router cisco 2503, I need to know what is Max. speed supported on serial interface? Presently we have 128KB leased line, and want to know weather I can upgrade the leased line to 256K with the same router ?
THanks,
A.S

Hello,
if you are referring to the two serial interfaces on your 2503, these are high-speed serial interfaces, which support speeds up to 2048kbps, or roughly 2MB.
Check this link for more details:
Cisco 2503 Router
http://www.manucomp.com/cisco_catalogue/cisco_2503_router.html
HTH,
GP

Similar Messages

How to find the max data transfer rate(disk speed) supported by mobo?

I plan on replacing my current HDD with a new and bigger HDD.
For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
Here's dmidecode:
# dmidecode 2.11
SMBIOS 2.5 present.
80 structures occupying 2858 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 101 bytes
OEM-specific Type
Header and Data:
DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A17
Release Date: 04/06/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 17.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 755
Version: Not Specified
UUID: 44454C4C-5900-1050-8033-C4C04F434731
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PU052
Version:
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Space-saving
Lock: Not Present
Version: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 0.0 V
External Clock: 1333 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x1 Proprietary
Current Usage: In Use
Length: Long
Characteristics:
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel Gigabit Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF01000
Status: Valid, Not Full
Change Token: 0x00000018
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: AD00000000000000
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FDFFFFFF
Range Size: 4064 MB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1103
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1410, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD01
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8200, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
00 00 00 00
Handle 0x8300, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 11 02
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
00 00
Handle 0xD401, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 152 bytes
OEM-specific Type
Header and Data:
D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
65 FC 01 FF FF 00 00 00
Handle 0xD403, DMI type 212, 157 bytes
OEM-specific Type
Header and Data:
D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
52 BF 40 45 02 52 BF 00 FF FF 00 00 00
Handle 0xD800, DMI type 126, 9 bytes
Inactive
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf says that it is 3.0Gb/s
and here's hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD800JD-75JNC0
Firmware Revision: 06.01C06
Standards:
Supported: 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156250000
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76293 MBytes
device size with M = 1000*1000: 80000 MBytes (80 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Last edited by Inxsible (2011-03-27 04:40:49)

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

Re: Satellite L855 - max speed with newest SSD

I am looking to buy this notebook
+Message was edited: broken link has been removed+
(Croatian language, but will help)
I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
thanks,
Mario

> I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
I guess you are speaking about the Satellite L855 series since this model mentioned in your subject.
I dont think that Satellite L855 supports an SATA III HDD controller.
I think its SATA I, maybe SATA II
My notebook supports SATA I (1.5Gb/s) and I upgraded the unit with an SSD SATA III drive (6Gb/s). The SSD works fine but of course it does not reach the full 6Gb/s due to the HDD controller limitation.

Max speed with Auto Flip?

Hi!
I need to scan a few pdf documents at fast speed as part of my work. I set the Auto Flip speed to 0.02 seconds in page transitions. Is this speed too fast for a 60Hz monitor? Will Acrobat be able to display all pages at this speed or will it miss some pages out? Also, is there a drop in quality this way or will all the images and text be catched and displayed in full quality at 0.02sec autoflip speed?

> I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
I guess you are speaking about the Satellite L855 series since this model mentioned in your subject.
I dont think that Satellite L855 supports an SATA III HDD controller.
I think its SATA I, maybe SATA II
My notebook supports SATA I (1.5Gb/s) and I upgraded the unit with an SSD SATA III drive (6Gb/s). The SSD works fine but of course it does not reach the full 6Gb/s due to the HDD controller limitation.

Max CPU Supported?

Hi there,
Could someone tell me what is the max cpu speed supported for the msi 5182 (socket 7 & alladin 5 based) motherboard?
Thank you.

http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=230&NAME=MS-5182
1.4 Update date 1999-9-9
Update Description - Fixed Windows98(R)SE Standby problem
- AMD(R) K6-III 450MHz
best i can find

Fan stuck on max speed

Hi there I have a HP Envy 700-230ea and for some reason the system fan seems to be stuck on max speed I have tried many options to reduce it but none seem to work. I set it to power saver and left it to be idle but it continues to run on full. I have checked bios but there doesnt seem to be any settings to control the speed and have also installed speedfan but yet again doesnt make the slightest bit of difference for first week the computer ran really quiet but now the fan is very loud even when its not under pressure.
Please help
Thanks in advance
This question was solved.
View Solution.

Hello again DavichGee,
I am sorry to hear you are still having the issue. I would like you to try resetting the BIOS on your computer. You can do this by restarting the computer and tapping F10. When you get into the BIOS click on File and click on Apply Defaults and Exit.
If this does not resolve your issue I still think it would be best if you contact HP Technical Support for repair options.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP Compaq 615 | no pwm-capable sensor modules | fans at max speed

Hi,
I have installed archlinux on an old HP Compaq 615 laptop, everything is working fine, but I have problems with the fan speed. After installing lm_sensors, configuring the sensors with sensors_detect resulted in this:
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 11h thermal sensors' (confidence: 9)
Driver `to-be-written':
* Bus `SMBus PIIX4 adapter at 0b00'
Busdriver `i2c_piix4', I2C address 0x4c
Chip `SMSC EMC1402' (confidence: 6)
Driver `adm1021':
* Bus `SMBus PIIX4 adapter at 0b00'
Busdriver `i2c_piix4', I2C address 0x4e
Chip `Maxim MAX1617' (confidence: 3)
Note: there is no driver for SMSC EMC1402 yet.
Check http://www.lm-sensors.org/wiki/Devices for updates.
Running pwmconfig leads to the error:
/usr/bin/pwmconfig: There are no pwm-capable sensor modules installed
If I execute sensors, I get this:
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +51.4°C (high = +70.0°C)
(crit = +100.0°C, hyst = +95.0°C)
max1617-i2c-5-4e
Adapter: SMBus PIIX4 adapter at 0b00
temp1: +0.0°C (low = +0.0°C, high = +0.0°C)
temp2: +51.0°C (low = +45.0°C, high = +60.0°C)
The fans are blowing at max speed, and the sensors are not providing information on fanspeed. I have found multiple threads on this topic, and tried the following:
Turning OFF/ON the option "Fan always on while on AC power" .
Passing the parameter "acpi_enforce_resources=lax" to the kernel via GRUB.
That didn't help. If I list the modules and search for k10
lsmod | grep k10
k10temp 12588 0
hwmon 12930 3 k10temp,adm1021,radeon
It seems that k10temp is loaded and used to show the sensor temperatures. On the fancontrol page of the ArchWiki, there were tips on increasing fan_div, but the problem was for me to find the chipset name.
The reported chipset `adm-1021` is not available in `/etc/sensors3.conf`, only `adm-1025`. Also, what's up with
Driver `to-be-written':
result of `sensors-detect`? Is there any way to stop the fans from blowing at full speed for HP Compaq 615?

I just tried turning ACPI off, by passing `acpi=off` kernel parameter in the /etc/defaults/grub:
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="acpi=off"
The fans were dead afterwards, but as the warning on the Acpi Modules Wiki Site states
2. "Easy" Put acpi=off in the kernel line in your bootloader's configuration file, but that will kill all ACPI functionality like battery charging and power saving.
killing all ACPI functionality for HP Compaq has left me without the synaptics touchpad and the keyboard. I found on the Ubuntu Community Wiki - Boot Options that `noacpi` shuold be equivalent to `acpi=off`. That sounded weird, so I checked The Kernel Documentation:
acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
Format: { force | off | strict | noirq | rsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
rsdt -- prefer RSDT over (default) XSDT
copy_dsdt -- copy DSDT to memory
See also Documentation/power/runtime_pm.txt, pci=noacpi
noacpi [X86] Do not use ACPI for IRQ routing
or for PCI scanning.
Seeing that the options are in fact different, I tried the `noacpi` thinking that "disabling the use of ACPI for IRQ routing or for PCI scanning" ( I have no clue what that means ) might just do the trick. So back to `/etc/default/grub`
GRUB_CMDLINE_LINUX_DEFAULT="noacpi"
I updated the grub.cfg with
grub-mkconfig -o /boot/grub/grub.cfg
and removed: acpid, Cpu Frequency Scaling, and I cleaned up `mkinitcpio.conf` of everything :
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
rebuilt the kernel with `mkinitcpio -p linux` and rebooted. It seems to be working. What I don't know is why. Anyway, I wanted to post this in case someone comes across the same problem with HP Compaq <615> k10temp driver. I still get the error
/usr/bin/pwmconfig: There are no pwm-capable sensor modules installed
so I can only guess that for this specific laptop, there is an IRQ problem, and using `noacpi` solves it. This is the 6th time I've rebooted without hearing the fans at max, when I use the machine, the fan speed is adjusted for the tempereature, even without pwmconfig/fancontrol. My guess is that BIOS is doing it, if someone knows more about this stuff, I would like to hear abuot it. I'll use the machine for the next few days, if the fans behave properly, I'll mark the thread solved.

2009 17" Macbook Pro fans running at max speed aafter hard drive upgrade.

I recently picked up a 17" 2009 unibody MacBook Pro with Intel Core 2 Duo 2.8ghz, 4gb RAM, SuperDrive and a Samsung 1TB hard drive. The system did not come with the original hard drive and I don't have any other hard drives to test and verify that the new larger hard drive is the cause. I have tried a clean install of Snow Leopard, Lion and even Mountain Lion but no matter what my fans always running at max speed (5k+ RPM). I have looked at iStat and the temps of any of the components in the machine never show more than 42*C so the fans should never be running at full blast. Oddly enough smcFanControl shows 0* temp but fan speds for both left and right are always 5.5k+ and very noisy. Using HDD Fan Control I am able to get at least the right fan to run at a controlable speed but its silence is drowned out by the left fan that still runs on full blast. I have already done multiple SMC resets and PRAM resets with no change in the condition. These noisey fans are driving me insane! I have run every available update as well. Is there a chance that the hard drive or something elses temp not being supported or detectable by OSX is causing the fans to default to the fail safe constant high speed?!

rriggin wrote:
I will have to try that when I get can find the original discs because I have been unable to boot into the diagnostic utility with my Snow Leopard, Lion, or Mountain Lion discs. More than likely I am thinking a sensor failure because even booting into Ubuntu Live USB thumbdrive the fans still run at max.
Well your just a regular pirate. There is no Mountain Lion disks, it's not even out of Beta and avaialble to the public yet
We thought you were just mistaken but now your tech handy enough to boot a Mac off a Linux live USB, so that means you've been bad and downloaded MT Lion off a P2P network or something.
If your beta testing 10.8 your bound to secrecy and not allowed to be discussing it and posting this sort of question on this forum, but the other one.
If you know anything, OS X must "talk" to the hardware or else the default setting is to race the fans. Linux doesn't do this by default as it's designed for generic PC's which a Mac may appear to be one it's not really. Apple only supports OS X and Windows 7 on Mac's, not Linux.
Obviously something on your machine is SEVERLY messed up in hardware, likely a dead sensor, you bought a used lemon that someone didn't want to pay to get fixed.
Want to try Linux?, read this

Hub 1 max speed?

Hi,
A very quick question if I may?
What is the max speed that the version 1 of the BT Hub is capable of delivering?
Thanks,
Arnak
Solved!
Go to Solution.

Here are my home hub 1 stats. Upload speed is usually about 1.2 mb, but dropped due to some noise recently.
It will sort itself out eventually.
DSL Connection
Link Information
Uptime:
13 days, 10:20:51
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
846 / 12,437
Data Transferred (Sent/Received) [GB/GB]:
1.50 / 13.05
Output Power (Up/Down) [dBm]:
12.5 / 0.0
Line Attenuation (Up/Down) [dB]:
18.0 / 33.5
SN Margin (Up/Down) [dB]:
11.5 / 4.5
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
5 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
1,201 / 0
FEC Errors (Up/Down):
0 / 662,385,328
CRC Errors (Up/Down):
0 / 31,836
HEC Errors (Up/Down):
0 / 29,524
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Max speed 1.0Mbps?

Why is the max speed that I get with my WRT150N 1.0Mbps? It doesn't matter where I'm at in the house, it doesn't matter if its an HP laptop, Dell laptop etc...the max speed i get is 1.0Mbps?

What is the speed you are getting when you connect the computer straight to the Modem...?
What is the speed you are getting on the wired computer(computer connected to the router via ethernet cable)...?
Try upgrading your Router's Firmware and then reconfigure it...
Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Often I will leave my office and return to find the fan running at max speed and the computer is unresponsive

I also have a MacPro3,1 (2009) I believe and just started experiencing similar issues as described here.
I have scheduled sleep and start cycles and often I will leave my office and return to find the fan running at max speed and the computer is unresponsive or I find the computer booted in to disk utility mode.
I also often loose ethernet connectivity and have to try renewing DHCP lease several times before it will finally work.
Has anyone found solutions for this. I have looked at the console errors right before shutdown and don't really see anything fishy. Here are the last couple of lines before it looks like it shutdown.
12/4/14 10:08:37.447 PM xpcproxy[5066]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
12/4/14 10:08:58.145 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.193 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.235 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.269 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.301 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.662 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:09:57.998 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:09:58.142 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:10:30.000 PM kernel[0]: PM notification timeout (pid 1514, Messages)
12/4/14 10:10:31.129 PM mDNSResponder[39]: DHCPWakeTime: SCDynamicStoreCopyDHCPInfo index 0 failed CFDateRef start 0000000000000000 CFDataRef lease 0000000000000000 CFDataGetLength(lease) 0
Any help would be greatly appreciated.
<Re-Titled By Host>

Mac Pro early 2009 is Mac Pro4,1, anyway, I think you need to boot into recovery mode, launch Disk Utility, then select startup volume and run repair disk.
Xcode is the latest one, by the way?

Airport Extreme + Airport Express and Max Speed. Does my solution work?

So, I am setting up a new network, with these parameters
1) Extreme - main station, broadcasting dualband 2.4Ghz 802.11b/g/n and 5 Ghz 802.11n
2) Express - to extend network
3) Max Speed!
So from what I've read, I could "simply" do this
On the Extreme set to broadcast SSID "XYZ" on both 2.4/5
On the Express set it to Extend "XYZ" on either 2.4 OR 5, not both.
And then presto, network. However, I'm thinking this is way to simple
So my question is
1) Does the Exteme only broadcasts one network on both bands? I have seen that some posters have suggested to broadcast "XYZ" on 2.4 and then call another "XYZ 5 Ghz". If I want to maximize throughput for all devices, what should I do? Range is not an issue, both signals are perfect.
Cheers

First, there is no assurance that 5 GHz will provide you with higher throughput if the signal has deteriorated due to distance or obstructions. It is not unusual to see the 2.4 GHz band providing better throughput if the signal must pass through a few walls to reach the Express.
The point is this....the Express will choose the best signal quality based a complex formula of speed and noise. If it "sees" a better signal at 2.4 GHz, that is where it will connect. If the 5 GHz signal is of high quality, the Express will connect at 5 GHz.
Your computer will do exactly the same thing. If you are in the same room as the main router, it will connect to 5 GHz. Walk the laptop down the hall past a few rooms and around the corner and it will most likely connect to 2.4 GHz.
If you have a Mac laptop handy, move it very close to the area where you plan to install the AirPort Express. Hold down the option key on the Mac while you click on the fan shaped AirPort icon at the top of the screen. Look at the Channel information to find out whether the laptop is connected at 2.4 GHz or 5 GHz.
That will be a good indication of the band that the Express will connect to. What are your results when you try this?

IP4 3G Internet max speed?

What is the max download speed for iP4 over 3G? I just tested and got 765kbps. Thank you.

The HSDPA-Standard supports up to 3.6 / 7.2 Mbit/s (download)

Max speed for 645 ultra?

What is the max processor speed for the 645 ultra? The manual says can support from 1.5 to 2.0ghz and up. How high does the "up" go. Would I be able to get the new 3ghz processor when it comes out? Right now I have a 1.6ghz (overclocked to 2.02ghz) and want a higher speed...
(oh yeah, I have the MS-6547 version 1)

http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=43%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6547
not sure on 3.0 one way or other myself

MIG 3.92 for Spartan 6 LX9/LX16 DDR2 max speed

This is my setup:
ISE 14.7
MIG 3.92
FPGA spartan6 ( xc6slx9-2csg225 )
DDR2 Micron mt47h64m8xx-25e
Question#1: Table 25 in DS162 shows max 625Mbps (3200ps) for -2 FPGA speed grade, but MIG ver. 3.92 GUI only allow 3750ps (533Mbps).
Question#2: Should this FPGA support DDR3? On UG388 Table 1-2, Note 1 says it supports 512Mb for DDR3. Why DDR3 is not in the "memory type" drop list?
Thank you very much!

Hi,
DS162 gives performance characteristics for difefrent speed gardes but it has not mentioned any specific package.
If you select csg324 it supports DDR3 and 625Mbps
CSG 225 might not be having enough pins to support a DDR3 device that are currently available.
Also fmax of differnt packages depends on FPGA, memory speed garde and our characterization results which cannot be changed
So if you need DDR3 and 625Mbps please go for csg324 package.
Hope this helps
-Vanitha

Max speed support on serial 2503

Similar Messages

Maybe you are looking for