Max speed with Auto Flip?

Hi!
I need to scan a few pdf documents at fast speed as part of my work. I set the Auto Flip speed to 0.02 seconds in page transitions. Is this speed too fast for a 60Hz monitor? Will Acrobat be able to display all pages at this speed or will it miss some pages out? Also, is there a drop in quality this way or will all the images and text be catched and displayed in full quality at 0.02sec autoflip speed?

> I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
I guess you are speaking about the Satellite L855 series since this model mentioned in your subject.
I dont think that Satellite L855 supports an SATA III HDD controller.
I think its SATA I, maybe SATA II
My notebook supports SATA I (1.5Gb/s) and I upgraded the unit with an SSD SATA III drive (6Gb/s). The SSD works fine but of course it does not reach the full 6Gb/s due to the HDD controller limitation.

Similar Messages

Re: Satellite L855 - max speed with newest SSD

I am looking to buy this notebook
+Message was edited: broken link has been removed+
(Croatian language, but will help)
I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
thanks,
Mario

> I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
I guess you are speaking about the Satellite L855 series since this model mentioned in your subject.
I dont think that Satellite L855 supports an SATA III HDD controller.
I think its SATA I, maybe SATA II
My notebook supports SATA I (1.5Gb/s) and I upgraded the unit with an SSD SATA III drive (6Gb/s). The SSD works fine but of course it does not reach the full 6Gb/s due to the HDD controller limitation.

Mac Pro fans run at max speed with no load

I recently picked up a Mac Pro 12core and it's been working amazingly well for the past few months... in the past day or two though the fan has been ramping up to maximum and staying there. When this happens there are no processes taking more than 4% CPU and the system is never less than 99% idle. Resetting the SMC controller solved the issue for about 8 hours overnight, but when I started using the computer this morning the fan ramped up about 15mins into using it.
The temps (in degrees C) around the mac pro: (collected with iStat Server):
CPUs: 23,22
Ambient: 23
HD Bays: 23,25,24
Mem Banks: 22,21,25,25,25,27,27,22
Northbridge: 27
Power supplies: 33,36
As you can see, nothing is hot... I'm not exactly sure how to calm it down. Nothing is working any differently than it was, it's just VERY LOUD now where it was whisper quiet, haha

I did order it from the Apple Refurb shop and I think it'd fall into that timeframe (got it early November), but I was kinda hoping for some things I could try on my own before shipping it out?

Max speed in Acrobat auto flip?

Hi!
I need to scan a few pdf documents at fast speed as part of my work. I set the Auto Flip speed to 0.02 seconds in page transitions. Is this speed too fast for a 60Hz monitor? Will Acrobat be able to display all pages at this speed or will it miss some pages out? Also, is there a drop in quality this way or will all the images and text be catched and displayed in full quality at 0.02sec autoflip speed?

0106xzh
If your program is Acrobat, you are in the wrong forum. You have posted in the Adobe Premiere Elements Forum (video editing).
Please post in the correct forum or wait for a moderator to see your thread here and move it to the appropriate Adobe Forum.
Acrobat
Thank you.
ATR

Suggestion - 5D3 minimum shutter speed for auto ISO

Hi, I would like to make a suggestion to Canon on the 5D3 camera, with regard to the minimum shutter speed for auto ISO. Currently I find that most of the selectable shutter speeds are on the low side (mostly below 1/125), and this may not be useful for handheld photography, or for fast moving subjects. I would like to suggest the following:
- More minimum shutter speed settings faster than 1/125 including in-between speeds e.g. 1/160 (between 1/125 and 1/250)
- Automatic shutter speed based on a multiple of lens focal length e.g. 2x lens focal length (for both prime and zoom lenses)
I hope that Canon can come up with an updated firmware that does this. Thanks.

Good idea, you can add it to the thread "Firmware Update Wishlist", and "Canon dSLR Wish List?" because a proper, configurable, flexible auto ISO is much needed and would beneficiate all cameras, not only 5D3.
I am not sure what Magic Lantern can give you on that issue, but you can take a look at their page.
Now, as a short term solution, on 1D4 I have put the cfns for 'shutter speed range' and 'iso speed range' in MyMenu, and when I need I change the max ISO (usually 1600) and a min shutter seepd (depends on lens and subject) on the fly. Not very practical (many button push needed), but it works.
I hope that helps
Alain

Slow Wireless Speeds with E900

Hello People, I have a linksys E900 Wireless Router which was working fine from last 2 years. Currently the download speeds are showing as max of 20 Mbps but when wired it goes up to 48 Mbps. Firemware - 1.0.06Security - WPA2 PersonalChannel Width - 20 MHz,, have tried with Auto 20 or 40 as well Channel - 9 -2.452GHZ ,, have tried , 1,3 ,6.WMM Support - Disabled Sam.com

WMM Enable should be enabled for N mode and fast speeds on N to work correctly.WMM Support must be enabled for single wireless N mode to function.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&respid=0&snid=2&dispid=0&cpage=search
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=acca9b9008f04a66af818c2ab366001e_Positioning_the_external_antennas_on_the_Linksys_WRT1900AC.xml&pid=80&converted=0

Poor internet speed with time capsule or Airport extreme

I'm trying to find away to increase the throughput of my 1st generation tme capsule. i'm getting a 33% drop in speed over wireless compared to wired conncetions.
current setup
Virginmedia XXL broadband 100Mbit down 5Mbit up.
Modem standard virginmedia modem (not the superhub) connected to Apple time capsule (500Mb) @ 1000Mbit full duplex
time capsule reset to default and then configured to use 5Ghz band, channel 36 . (no other networks in the area using this band) tested using wifi scanner and istumbler
tested down/up speed using www.vmspeed.com
wired connection
105Mb/sec download 4.9Mb/sec upload
wireless connection
73.14Mb/sec download 4.7Mb/sec upload
i have tried testing with an airport extreme 3rd Gen with the same setup and get the same results.
Tested using a 2008 Macbook running Lion 10.7.3 and also tested using 2010 Macbook unibody running snow leopard 10.6.8. both laptops connecting to wireless network at 270Mb/sec and are both exhibiting the same drop in speed over wireless. only one laptop connected to the network at a time.
is thier a limit to the time capsule/airport extreme wireless throughput?

Further to Bob's comments..
A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

Very slow download speeds with ATT U-Verse

Hello,
Experiencing very slow download speeds with Macbook Pro 2011, on Lion, and ATT UVerse Max, which should allow for an avg. 11-12 MBPS speed. Instead, I get a fluctuating 60-370 kbps speed. I am not experiencing this problem on my Windows machines (Laptop running Windows 7 and Desktop on XP), it is only affecting the Macbook pro. I wonder if this issue is a known problem with ATT U-Verse and Macs, I spent hours yesterday with their support online and they couldn't help me, stating that from their side all settings were OK; the first representative from ATT re-booted the router remotely and that seemed to work for about 10 minutes, and then it went back to a crawling speed...
Any suggestions welcome!
Thanks

Do you have QOS enabled in your router? Did you try plugging the win7 laptop directly and check the speed?

Improve Download Speed with Mobile Wireless Card

I just purchased a GT MAX 3.6 Express LaptopConnect Card from AT&T to allow mobile internet access. While I can connect to the internet, the speed is very slow (I'm getting 3 of 7 bars). I understand there might be a Mac "booster" I can purchase. Has anyone heard of such a thing? Or, do you know how I can improve my download speeds with a wireless card? Thanks kindly for your help on this...

I received M Q today. To my surprise, there is no way to connect M Q to PB or any computer. I called Verizon and talked with their data connect department. They confirmed that M Q cannot be used as a modem The only device that will is Treo 700p. I am returning the unit by FedEx today. Treo is xpensive. So I will downgrade from MBP to PB G4 15" and use Verizon's Broadband Wireless PCMCIA card

Catalyst 2960, Auto-MDIX, Auto-Speed and Auto-Duplex

Hi
I have a 2960 switch. Our ISP provided me with a straight-through cable and said that I needed to use a cross-over, and set speed to 100 and duplex to full.
Instead, I used Auto-MDIX, but then I have to set speed and duplex to Auto - the switch won't allow manual setting of speed and duplex when using auto-MDIX. The link then sets itself to 100-half.
Do I have to use a cross-over cable so that I can set the speed and duplex?
Thanks and regards
Lee

Hi Lee,
Yes with auto-mdix you cannot manually set the speed and duplex settings.
I think your ISP had set the duplex settings to half duplex and that is the reason it is negotiating to half duplex or if he is using some kind of converter between your switch and thier switch it could be an issue.
Also yes if you use a cross over cable you will definetely be able to set the speed and duplex setting to 100 and full but if your isp is on half duplex you will face collisions so just confirm from your ISP his switchport settings.
HTH, if yes please rate the post.
Ankur

Hub 1 max speed?

Hi,
A very quick question if I may?
What is the max speed that the version 1 of the BT Hub is capable of delivering?
Thanks,
Arnak
Solved!
Go to Solution.

Here are my home hub 1 stats. Upload speed is usually about 1.2 mb, but dropped due to some noise recently.
It will sort itself out eventually.
DSL Connection
Link Information
Uptime:
13 days, 10:20:51
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
846 / 12,437
Data Transferred (Sent/Received) [GB/GB]:
1.50 / 13.05
Output Power (Up/Down) [dBm]:
12.5 / 0.0
Line Attenuation (Up/Down) [dB]:
18.0 / 33.5
SN Margin (Up/Down) [dB]:
11.5 / 4.5
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
5 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
1,201 / 0
FEC Errors (Up/Down):
0 / 662,385,328
CRC Errors (Up/Down):
0 / 31,836
HEC Errors (Up/Down):
0 / 29,524
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Max speed for Autoflip in Acrobat?

Hi!
I need to scan a few pdf documents at fast speed as part of my work. I set the Auto Flip speed to 0.02 seconds in page transitions. Is this speed too fast for a 60Hz monitor? Will Acrobat be able to display all pages at this speed or will it miss some pages out? Also, is there a drop in quality this way or will all the images and text be catched and displayed in full quality at 0.02sec autoflip speed?

Did you try it?

Max speed support on serial 2503

Hi All,
I have a router cisco 2503, I need to know what is Max. speed supported on serial interface? Presently we have 128KB leased line, and want to know weather I can upgrade the leased line to 256K with the same router ?
THanks,
A.S

Hello,
if you are referring to the two serial interfaces on your 2503, these are high-speed serial interfaces, which support speeds up to 2048kbps, or roughly 2MB.
Check this link for more details:
Cisco 2503 Router
http://www.manucomp.com/cisco_catalogue/cisco_2503_router.html
HTH,
GP

Max speed 1.0Mbps?

Why is the max speed that I get with my WRT150N 1.0Mbps? It doesn't matter where I'm at in the house, it doesn't matter if its an HP laptop, Dell laptop etc...the max speed i get is 1.0Mbps?

What is the speed you are getting when you connect the computer straight to the Modem...?
What is the speed you are getting on the wired computer(computer connected to the router via ethernet cable)...?
Try upgrading your Router's Firmware and then reconfigure it...
Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Airport Extreme + Airport Express and Max Speed. Does my solution work?

So, I am setting up a new network, with these parameters
1) Extreme - main station, broadcasting dualband 2.4Ghz 802.11b/g/n and 5 Ghz 802.11n
2) Express - to extend network
3) Max Speed!
So from what I've read, I could "simply" do this
On the Extreme set to broadcast SSID "XYZ" on both 2.4/5
On the Express set it to Extend "XYZ" on either 2.4 OR 5, not both.
And then presto, network. However, I'm thinking this is way to simple
So my question is
1) Does the Exteme only broadcasts one network on both bands? I have seen that some posters have suggested to broadcast "XYZ" on 2.4 and then call another "XYZ 5 Ghz". If I want to maximize throughput for all devices, what should I do? Range is not an issue, both signals are perfect.
Cheers

First, there is no assurance that 5 GHz will provide you with higher throughput if the signal has deteriorated due to distance or obstructions. It is not unusual to see the 2.4 GHz band providing better throughput if the signal must pass through a few walls to reach the Express.
The point is this....the Express will choose the best signal quality based a complex formula of speed and noise. If it "sees" a better signal at 2.4 GHz, that is where it will connect. If the 5 GHz signal is of high quality, the Express will connect at 5 GHz.
Your computer will do exactly the same thing. If you are in the same room as the main router, it will connect to 5 GHz. Walk the laptop down the hall past a few rooms and around the corner and it will most likely connect to 2.4 GHz.
If you have a Mac laptop handy, move it very close to the area where you plan to install the AirPort Express. Hold down the option key on the Mac while you click on the fan shaped AirPort icon at the top of the screen. Look at the Channel information to find out whether the laptop is connected at 2.4 GHz or 5 GHz.
That will be a good indication of the band that the Express will connect to. What are your results when you try this?

Max speed with Auto Flip?

Similar Messages

Maybe you are looking for