Max stock level and reorder point for all the materials
Dear experts,
Is there any standard mm report that will give the details of max stock level and reorder point details for all the materials?
Thanks in advance,
Regards,
Krish
Your requirement can be pulled from table MARC. I dont think there is a standard report to meet your requirement. You can meet your requirement through SAP Query though.
Similar Messages
-
Reg storage location for all the materials in the plant.
Dear Gurus,
In my plant I would like to know the storage location for all the materials in the plant.can u guys suggest me the solution?If Stock is there in Each Storage Location then You can Run MMBE Report by Inputting Material & Plant. Then it will Show All the Storage Location Stocks for a Plant.
Or you can Run MM60 Report Which will give you Detail Report.
Else you Can Check in MMSC List of Extendable Storage Locations.
Regards,
Ashok -
Need to checks if ASN has been received for all the materials in the
Hi Experts,
Can you please give me an idea
I need checks if ASN has been received for all the materials in the Invoice.
what filed do i need to check.
Regd's
Vardesh,Hi Jagadeeswari,
If you need to check Workflow Trace check Transaction SWU9. This displays all the WOrkflow started on a particular time period we specify. Check Program RSWTTR01 and also table SWT_LOGCAT which could help you. The transaction i have specified displays all the Workflow that has been executed and whether it is been a success or a failure.
Hope this would help you.
Thanks,
Prashanth -
Query For Finding Yearly Opening and Closing Balance for All the Items
Hi Experts,
I am working on Query Based Report for finding the Yearly Opening and Closing Stock for all the Items
i will give yearwise selection and I want opening and closing stock in between that years
Warm Regards,
Sandip Kokate
Edited by: Sandipk on May 20, 2011 1:58 PMHi,
Declare @SDate DateTime
Declare @EDate DateTime
Declare @Whse nvarchar(10)
Set @SDate= (SELECT min(F_RefDate) FROM OFPR T1 where T1.[Name] ='[1%]' )
Set @EDate= (SELECT max(T_RefDate) FROM OFPR T1 where T1.[Name] ='[%1]' )
Set @Whse=(Select Max(s2.Warehouse) from OINM S2 Where S2.Warehouse = '[%2]')
BEGIN
Select @Whse as 'Warehouse', a.Itemcode, max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance, sum(a.INq) as 'IN', sum(a.OUT) as OUT,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing ,
(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from( Select N1.Warehouse, N1.Itemcode, N1.Dscription, (sum(N1.inqty)-sum(n1.outqty))
as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
Where N1.DocDate < @SDate and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,
N1.Dscription Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance,
sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <= @EDate
and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription
Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <=@EDate and N1.OutQty > 0
and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcode
END
I hope this will work for you.
In above query you can also user OFPR.Code, OFPR, Category OFPR.Indicator instead of OFPR.Name.
Regards
Vaibhav Anharwadkar
Edited by: Vaibhav Ancharwadkar on May 24, 2011 9:23 AM -
Use of max stock level w/o lot size HB
hello champs..
need a help on below functionality
Can I have the functionlity of max stock level without using "lot size - HB" in material master.
my requirement..tht system should not create any procurement proposal if stock reachs at max level..
but with this i am using min lot size also..and this functionality got vanish if I use "lot size=HB" ..system dont see min or max lot size..it just create the proc proposal for the qty upto max stock level..
my requirement
for a material max stock level -100
min lot size - 50 , max lot size 80
and if my stock is 30 ,and my reuirement is for 80..system should not cross the max stock level and should create the prc proposal for 70 only..
pl share your thoughts on this..I'll appriciate wih necessary reward points..
Br
SumitHi
thanks for reply..but i am not sure whther w/o using HB max stock level will be considered or not..
i yet have to test the same but as per SAP , if you want t maintain themax stock level in the plant , lot size should be EX
is this undertsnding is okie..
thx in advance
BR
Sumit -
Calculation of Safety Stock and Reorder Point under Forecast Model T
Hi Gurus!
Happy Holiday!
I would like to ask for your assistance on how the the safety stock and reorder point was calculated with the following values available. I would really appreciate it if you could give me details on the calculation.
Below are the values:
Basic data
Forecast date 01.12.2009 Unit CTN
Forecast model T Service level 0.0
Period indicator M Paramtr profile
Control data
Initialization Tracking limit 4.000
Model selection A Procedure selection 2
Parameter optimizatio Optimization level F
Alpha factor 0,10 Beta factor 0,10
Gamma factor 0,00 Delta factor 0,30
Basic value 5.464- Trend value 5.603-
MAD 4.758 Error total 4.722
Safety stock 1 Reorder pnt. 1
No. of values
Consumption 6 Forecast periods 1
Initial. periods 0 Fixed periods 0
Periods per season 12
Historical data
Period Original Corrected value
11.2009 3.000 3.000
10.2009 0.000 0.000
09.2009 0.000 0.000
08.2009 9.000 9.000
07.2009 21.000 21.000
06.2009 20.300 20.300
Forecast results
Period Original Corrected value
12.2009 0.000 0.000
Appreciate your assistance!
Thank you and Happy Holidays!
JiSweth, you are asking for consulting, and in my opinion it is way beyond what can or should be reasonable to achieve in such a forum. You are asking complex questions, that most probable have more than one possible answer.
I suggest that you get on-site help from a knowledgeable and experienced consultant. These are crucial business issues, and should be dealt seriously. -
Safety stock and Reorder point calculation in inventory planning
Hi,
How System does the calculation of own safety stock, and Reorder point, maximum safety stock level at parent and child location while running inventory planning services in SAP APO SPP. does anyone about the calculation please let me know
Regards
PuneetHi,
How System does the calculation of own safety stock, and Reorder point, maximum safety stock level at parent and child location while running inventory planning services in SAP APO SPP. does anyone about the calculation please let me know
Regards
Puneet -
Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping ! Thx
Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping ! Thx
-
Vb type in house production with controls on Max stock level, considering -
Dear friends,
Please think of possible solution to map the follwing scenario,
my client having vb tpe scenario for in house mfg product, As the it reaches to re-order level it generates planned order ,
eg mrp type -vb, reorder point-200 ,min lot size -150 and max lot size 500,
and Max stock level - 1500 and his lotsize -EX,
here after creation of planned order he wants a control , that when it is converted to process order , in change mode , he should able to change the order qty in such way that , it Need to consider open process orders and Available Stock
(Unrestricted & Quality) also in same Plant
e.g. Max Stock Lvl is 500 Unrestricted Stock 100 Quality Stock 50 open
ProcOrder is 200. If user trying to change ProcOrd 250 it should allow
to change ProcOrdr of 150 only.
please sugeest how to set the controls.Hi Dhar,
In av. check scope (OPJJ), include the stocks which you wish to consider eg: quality insp. stock etc in addition to unrestricted stock. The system will then create planned orders only for the needed items.
If user tries to change the qty of the order to more than required, MD04 will show an exception message. Hope this meets your need.
If helpful award points
Regards,
Vivek -
Max stock level as safety stock from material master while running SNP Heuristic
Hi Experts,
Our user wants to consider max stock level as safety stock from material master while running SNP Heuristic, not the actual safety stock.
Is there any possibility for this setup?
--KishoreHi Kishore,
With the given details I suggest that the user can maintain the max stock level values directly in safety stock field of the material master for all materials to be planned by SNP heuristic (keeping the max stock level field blank). Then this safety stock field (which has actually the max stock level values) will update the safety stock values in APO product master and in turn can be considered for SNP heuristic.
Note: The max stock level field in APO product master is used by SNP heuristic only when the target stock level method is maintained as 4, 5 or 6. Since your requirement is to use max stock level as safety stock, so it does not look like that you will be using these target stock level methods or the max stock level field in R/3 and APO. So, this can be left as blank in both R/3 and APO.
Please let me know if this helps.
Regards,
Umesh -
Hi all
How we can calclutate the manimum stock level for the materials tht we maintained in the mateial master mrp 1.
oh which basic we can calculate the maxi stocklevel. is this is system maitnain automatically.
2. what is mean by Takt Time in material master mrp 1 . pls explain me. how we can use this .You use the lot-sizing procedure Replenishment up to maximum stock level if you want to fill the stock up to the highest possible level or if you can only store a certain quantity of a material due to the container size. This applies to a tank, for example. The capacity of the tank determines the maximum stock level.
Takt time (Used in fixed lot size with splitting & overlapping) - You can determine whether a fixed or period lot size is divided into partial quantities and that these are to be produced at regular intervals that overlap each other.
This lot-sizing procedure is very useful if the actual requirement quantities that occur in the period or the quantity to be produced for a certain date are very large but production is only laid out for smaller quantities.
In fixed lot size with splitting & overlapping you have to maintain the Takt time field for the period of time that the procurement proposals are to overlap.
Hope its clear. -
Replenishment upto max. stock level during SNP heuristics run.
Hi Experts,
As per the requirement from client, we need to configure the setting of replenishment upto max. stock level during SNP heuristics run.
I am using below settings in R/3 for achieving the expected results.
(R/3 ) MRP1 u2013
Lot size HB Replenish to maximum stock level
Maximum stock level 20,000
(APO) Targ.Stk Lvl Methd 5 u2013 in APO u2013 product master - lot size tab.
Still, after heuristics run, the requisitions are getting created equals to forecast value. It should get generated as max. stock level maintained.
Could anyone share their experience regarding this? Am I missing some additional setting?
Inputs are highly appreciated!
rgds/JayDear Jayprakash ,
If the requirement is that you have to replenish upto a certain stock level then instead of maintaining the Max Stock level you can simply maintain
SB : Safety stock from product master
and in the Safety stock field maintain the quantity as desired ( in this case 20000 ) . This probably will solve the problem in your case . You may not require to maintain Max stock level .
Target stock level in heuristics also works fine with the following settings
make sure you maintain
Target stock level method as =5
In Maximum Stock level = maintain the quantity desired ( 20000 in your case say )
do not maintain any safety stock method keep it blank .
then location heuristics generates PR according to the the maximum stock level.
If still it is not working plz let me know what other settings you are maintaining probably we will find a way out .
Hope it helps .
Thanks
Debsankar -
I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?
dj_paige wrote:
however, I do point out that obtaining an additional hard drive and not throwing anything away seems a preferable solution to me.
heidie22, dj_paige has a very good point there. I would not through away the NEF files; I would archive them to a external drive.
By the way, I am assuming that converting RAW files to DNG is a decision you have made and not an accident. -
USELESS ONLINE HELP FACILITIES
For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
Peter Hanney
Miami, Fl.Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
Apple does not respond here and I can find no other questions for your fellow Apple users to answer. -
I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store
Maybe you are looking for
-
How to switch database at runtime usign OpenDoc
Hello, We are using crystalreport 2008 and BOE XI 3.1. I open crystal report from crystalreport using hyperlink and opendoc in java. This is working fine if I define db credentials in CMC, but I need to use different databases based on the parameter.
-
Advantages and Disadvantages of Client Object Model in sharepoint 2013
I need Advantages and Disadvantages of Client Object Model in sharepoint 2013 like below in javascript. Users will have read/edit and approve access to the list. var clientContext = new SP.ClientContext.get_current(); var oList = clientConte
-
I am working on a website using JSP and Servlets that contains multiple webapps. A user could potentially leave one webapp and spend a large amount of time in another before going back. We would like to find a way to prevent timeout from occurring if
-
Overwrite and Delta options in Input schedules
Hi, We are planning to use 'Park and Go' feature of BPC and save some input schedule to our local machine. We will send these files to our endusers for offline planning. Endusers are not connected to BPC server. They dont have client installed on the
-
Can't able to create delivery in ME2O
Hi MM Team, one of my user is created a subcontracting PO and try to create a delivery in ME20 at that time he is getting a error message (Essential transfer parameters are missing in record: 000001) also added to it the vendor is a new toller vendo