Max users for a AIR-LAP1142-A-K9

I work at a small University where are are moving from a hitspot infrastructure (just provide wireless access) to dense user support model in order to use wireless during classrrom instruction. It have a request to provide wirless coverage in a classroom for up to 30 users. I have installed a Lap-1142 in the hall just overisde of the classroom last semister which provided wireless access for about 12 students. The class enrollment has grown and now will need to support up to 30 users. I just install a C3560G-POE to provide 1GB uplink for the switch. The instructed stated she will require students to download pdf files and some streaming media during class and I was asked if the wireless will be able to support this requirement.
I am not sure how many concurrent users a LAP-1142 can support and if it can can it support streaming media for 30 users. How would I go about testing this senairio? How can one test AP throughput? How do I ensure it will work during class with having to place another AP within the classroom?
Thank you for your help.
Mike

Where could I located Cisco's 25 user limit recommendation
If you have an autonomous AP, then there's no need to worry. It's just a rule-of-thumb. If it's controller-based then it's:
Wireless > 802.11a/n (or 802.11b/g/n) > General and look at "Clients (1 to 75)".

Similar Messages

Max users for a chatroom seems to be 30?

Running 10.5.8, iChat Server. I have a chatroom that seems to max out at 28-30 users. I tried creating a "persistent room" using a jabber script, but it still seems to max out at 30 users even though I specified 100. Is there any way to modify this? Surfing config data for jabberd2 seems to be pretty sparse on info for this, same with the documents for muc.

My searches behave a little differently. Maybe this will be helpful.
I have some messages from numeric sources. Say one of them is 12345678. I find that if I search for "1234", I can find the message, even though 12345678 never appears in the body of the text. But if I search for some string not at the beginning of the message, like "4567" or "5678", I cannot find it.
So the conclusion seems to be search for a string at the start of the name.

Changed Ulimits values for the Oracle user and getting error -bash: ulimit: max user processes: cannot modify limit: Operation not permitted when logging in.

I'm trying to increate the ulimits for max user processes and open files for the oracle user. I've set the values in limits.conf, /etc/profile and in oracle's environment scripts. Now when I log in as oracle I get the below errors. If I change the ulimits back to the original values errors go away but ulimits aren't changed.
login as: oracle
[email protected]'s password:
Last login: Fri Mar 6 09:56:02 2015 from mtkadmin12
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
[oracle@servername ~]$

Thanks for the update.
I modified the /etc/security/limits.d/90-nproc.conf and added a line for oracle and also modifed the oracle.sh file. The ulimits are setting correctly when I su - oracle but they are still wrong when sshing in as oracle.
[root@mtkdevorap11d-1 ~]# su - oracle
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 94371840
max memory size         (kbytes, -m) unlimited
open files                      (-n) 65536
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$
[oracle@mtkdevorap11d-2 ~]$ ssh mtkdevorap11d-1
Last login: Mon Mar 16 13:04:16 2015 from mtkdevorap11d-2.conveydev.com
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 64
max memory size         (kbytes, -m) unlimited
open files                      (-n) 4096
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$

Implementing max user sessions settings for TACACS with ACS 5.3

I'm a little confused about the configuration of max user sessions for device administration with TACACS.
When I've changed the configutration of unlimited sessions for a value in Access Policies > Max User Session Policy > Max Session User Settings
I think this value could limit the maximum number of sessions for each user, but instead this value limit in a global meaning all of my sessions.
For example: I need to limit the session for my users in 2.
user1 = Max 2 sessions
user2 = Max 2 sessions
user3 = Max 2 sessions
Whe i Put the value of 2 in Max Session User Settings
user1 + user2 + user3 = Max 2 sessions
This is a limitation of ACS 5.3 or my configuration needs something aditional.

Luis,
Are you saying that when you authenticate with user1 and user 2 that user3 isnt able to get access?
Do you have tacacs accounting enabled on the network access device?
Also what do you have configured for the group settings? If there is a maximum group setting and all the users are a member of the same group then the lesser of the two will be enforced. So if the group max sessions is set to 1 then the all users in that group will have a max session of 1.
Here is some reference material.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/access_policies.html#wp1162177
Thanks,
Tarik Admani

Please, where I can find the user guide for Macbook Air

Where , on the site of Apple, I can find a user guide for Macbook Air?
A new buyer of Apple products

somehwere in this list you will find the one for your model: http://support.apple.com/manuals/#macnotebooks

Query to find out the time used by an user for an application

Hello All,
I want to know the query to find out the whole time used by the user for an application. Please view the below data
Employee:
SNO EMP_ID EMP_NAME EMP_DATE LOGIN_TIME LOGOUT_TIME
1 10 Visu 21-Nov-2010 06:30:00 07:30:00
2 10 Visu 21-Nov-2010 06:40:00 07:20:00
3 10 Visu 21-Nov-2010 06:50:00 07:50:00
4 10 Visu 21-Nov-2010 07:30:00 08:30:00
5 10 Visu 21-Nov-2010 09:30:00 10:30:00
By checking the above data we can say that the total time Visu used the application is
8.30 - 6.30 (From 1,2,3,4 records) = 2hrs
10.30 - 9.30 (Based on 5th rec) = 1hr
So the total time Visu used the application would be 3 hrs = 180 mins.
Could you please help me in getting the result from that data using a query?

odie_63 wrote:
I think it may be solved with analytics too.
with t1 as (
            select 1 sno,10 emp_id,'Visu' emp_name,'21-Nov-2010' emp_date,'06:30:00' login_time,'07:30:00' logout_time from dual union all
            select 2,10,'Visu','21-Nov-2010','06:40:00','07:20:00' from dual union all
            select 3,10,'Visu','21-Nov-2010','06:50:00','07:50:00' from dual union all
            select 4,10,'Visu','21-Nov-2010','07:30:00','08:30:00' from dual union all
            select 5,10,'Visu','21-Nov-2010','09:30:00','10:30:00' from dual
     t2 as (
            select emp_id,
                    emp_name,
                    emp_date,
                    to_date(emp_date || login_time,'DD-MON-YYYYHH24:MI:SS') login_time,
                    to_date(emp_date || logout_time,'DD-MON-YYYYHH24:MI:SS') logout_time
              from t1
     t3 as (
            select t2.*,
                    case
                      when login_time < max(logout_time) over(
                                                              partition by emp_id,emp_date
                                                              order by login_time
                                                              rows between unbounded preceding
                                                                       and 1 preceding
                        then 0
                      else 1
                    end start_of_group
              from t2
     t4 as (
            select t3.*,
                    sum(start_of_group) over(partition by emp_id,emp_date order by login_time) grp
              from t3
     t5 as (
            select emp_id,
                    emp_date,
                    min(login_time) login_time,
                    max(logout_time) logout_time
              from t4
              group by emp_id,
                       emp_date,
                       grp
select emp_id,
        numtodsinterval(sum(logout_time - login_time),'day') time_spent
from t5
group by emp_id
order by emp_id
    EMP_ID TIME_SPENT
        10 +000000000 03:00:00.000000000
SQL> SY.

RoboHelp Packager for Adobe AIR (BETA)

It is so exciting. It been just a few months since we
released Adobe RoboHelp 7 and a brand new Technical Communication
Suite, and today we are ready to share with you guys what we
perceive as the future of Online Help. All I can say is that Time
flies like an arrow. With this, I welcome you all to this new world
of Web 2.0 and the future of Online Help - check out the Public
Beta of
RoboHelp
Packager for Adobe AIR
The tool is available for Free of Cost and can be used by
customers who have either Adobe RoboHelp 6 or Adobe RoboHelp 7 or
the Technical Communication Suite.
The RoboHelp Packager for Adobe® AIR™ allows you
to convert your existing WebHelp files generated using Adobe
RoboHelp® to an Adobe AIR application. Help and knowledge
bases delivered as Adobe AIR application will have a consistent
look and feel across all platforms.
RoboHelp Packager for Adobe AIR can:
Generate a single distributable file
similar to a .chm file.
Provide a variety of skins from which a user can choose from.
In addition, for any skin a user can choose different themes, which
control the look and feel in terms of colors and button/icons
images.
Provide a consistent look and feel on all platforms and
operating systems.
Enable you to comment, in addition to using other advanced
features such as Breadcrumbs, Mini TOC and Security (Digital
Signatures).
The output generated after running this tool is an .air file.
This is a single file that has built-in logic to install itself.
The same file can be installed on any platform that has Adobe®
AIR installed. Installing the Adobe AIR runtime is as seamless as
installing the Adobe Flash® Player for your browsers.
Another important aspect of the Adobe AIR installer file is
that it is a single file that contains all of the information
regarding the look and feel of the Help along with the content. It
is one package with no separate viewer required.
To read more about the benefits of packaging your help as
.air file, please visit the following link:
http://labs.adobe.com/technologies/robohelp/aboutoutput.html

When you are comparing this to Flash, does this comparison
extend to the requirement for each end user to install the Air
runtime on their PCs before they can access our RoboHelp system?
And that they will also get reminders to update to the latest
version of Air runtime?

Firewire to usb adapter for macbook air

Hello,
Just purchased the latest version Macbook Air. I'd like to transfer video from a Sony video camera w/mini DV tape, into iMovie '11 on the laptop. Trouble is, I can't use my existing firewire cable as before on the iMac desktop. There are prior discussions on the forum about this but none current. Have there been any new developments in the firewire adapter arena for Macbook Air? Thx.

Sonnet Technologies is supposed to introduce a Thunderbolt-Firewire adapter called the Sonnet Allegro later this month. http://www.sonnettech.com
"The Allegro™ FW800 Thunderbolt™ Adapter enables users to plug in a FireWire® 800 device, including a bus-powered drive, to any computer with a Thunderbolt port."

What's the semantic of "max user processes" (ulimit)

Hello everyone,
I don't understand the behaviour of ulimit, have a look at this shell dump:
$ ps hax | wc -l
120
$ ps h -u myUsername | wc -l
35
$ ulimit -Su 78
$ ps h -u myUsername | wc -l
bash: fork: retry: No child processes
bash: fork: retry: No child processes
bash: fork: retry: No child processes
bash: fork: retry: No child processes
bash: fork: Resource temporarily unavailable
$ ulimit -Su 80
$ ps h -u myUsername | wc -l
35
$
If I am currently running 35 processes, one would assume that >35 more should be sufficient to start two more processes - but obviously it isn't.
In this case, I needed at least "ulimit -Su 80" to start ps and wc.
If I set the "max user processes" limit to 79, the first four error messages change from "bash: fork: retry: No child processes" to "bash: fork: retry: Resource temporarily unavailable"
Can somebody explain this bevahiour to me, please? Why am I not allowed to create new processes, although the limits should be sufficient?

Apologies for the necro-bump but I hope this will help others.
ulimit -u does not give you the max number of processes rather it displays the max number of threads. To list the number of threads a user is currently using:
ps -L -u myusername | wc -l
The output from the above two commands can now be compared and allow you to set the appropriate ulimit.

How to calculate Min & Max temperature with just air temperature

Hi Gurus,
I have a requirement in which I have to build a Bex Query in which I have to find the Min & Max temperature of a day if a specific date range is used in the query.I have checked the multiprovider and there is only one field available
which is "Air temperature" and it's a KF. I have built a query which will give you the temperature for the day if you give a particular date range.
My question is,is it possible for me to find the min and max temperature with just air temperature as input?
Please let me know your thoughts.
Thanks,
Raj

Hi,
You have to create two KFs for Min and Max temperatures,
In Min Temp KF definition, Aggregation Tab-->Minimum--> reference char as 0calday
In Max Temp KF definition, Aggregation tab-->Maximum-->Reference char as 0calday
Regards,
Suman

RoboHelp Packager for Adobe AIR is GM

RoboHelp Packager for Adobe AIR is GM now and you can
download it now for FREE from Adobe site –
http://www.adobe.com/products/robohelp/robohelp-packager-for-air
Adobe AIR runtime enables applications to deliver both the
benefits of server connectivity and the compelling end user
experience of a desktop application. With a seamless offline-
online experience, end-users of Adobe AIR applications can continue
to work when they are temporarily offline. RoboHelp Packager for
Adobe AIR now enables you to publish in Adobe AIR format. Neither
of the popular help output options - CHM or WebHelp or WebHelp on a
Server provide the array of features as RoboHelp Packager for Adobe
AIR does today. That said, in my opinion, RoboHelp Packager for
Adobe AIR is a beginning, beginning of a new revolution in help
authoring. Here is a list of what you get today
· Auto Update - Adobe AIR applications that can update
themselves when online connection is available and that can work
perfectly when desktop is offline. For example, Adobe AIR help file
created with RoboHelp Packager for Adobe AIR will prompt the
end-users when an update is available. With a single click, the
help file will update itself.
· Get Web 2.0 features - Adobe AIR applications can
store information locally – for example, when you add
comments to Online Help, they are stored locally and can be viewed
after you have closed the application. End users can also comment
on external pages and store the comments as part of help file.
Comments are still available when Online Help has been updated
(provided file names don’t change) or when you are offline.
· Extensibility - Unlike HTML Help which depends on the
CHM viewer, the functionality of the Adobe AIR is extensible and
customizable. For example, organizations can add branding
information to Adobe AIR help file, including icons for help file,
branding imagery on the top of the help file and so on.
· Multiple tab – never before end user experience
- Adobe AIR help file also allows you to open multiple tabs within
the tri-pane enabling multiple help topics and threads to be
navigated at the same time.
· Integrated interface to everything your end users need
- You can also add resource links to your help files –
enabling a single access point for product pages, user forums,
knowledge base, online help and external web pages.
· Multiple templates to choose from - Organizations get
to chose from several of the templates and can select a particular
skin or theme for each of these templates. With RoboHelp Packager
for Adobe AIR, there are three templates come out of the box -
Multi-Tab Accordion, Unipane and Classic Help.
· End user preferences - RoboHelp Packager for Adobe AIR
enables the help users to customize their help by selecting their
preferences (something they can’t do for a CHM or for WebHelp
output – which is not hosted on a Server).
· Cross Platform - Adobe AIR is cross-platform and
cross-browser, supported on Windows, Mac and Linux (currently in
pre-release).
Needless to say, Adobe AIR has attracted a lot of interest
among the help community and some of the experts believe that
within two years, Adobe AIR will be the preferred help format for
40% of all help authors.
If you have not tried it, you can download it now from
http://www.adobe.com/products/robohelp/robohelp-packager-for-air
Thanks and regards
Vivek Jain
Group Product Manager, Adobe Systems
Adobe Technical Communication Suite, FrameMaker and RoboHelp
www.adobe.com/products/technicalcommunicationsuite/
blog-
http://blogs.adobe.com/techcomm/

When you are comparing this to Flash, does this comparison
extend to the requirement for each end user to install the Air
runtime on their PCs before they can access our RoboHelp system?
And that they will also get reminders to update to the latest
version of Air runtime?

RoboHelp Packager for Adobe AIR - Beta 2 Announced

RoboHelp Packager for Adobe AIR is now updated. You can
download the new version for FREE from Adobe labs -
http://labs.adobe.com/technologies/robohelp/.
It has added a long list of novel features - first time for a HATT.
Now, besides multiple tabs, favorites, commenting and multiple
skins like Multi-Tab Accordion and Uni-pane Help, you have another
set of new features.
Designed for End Customers - Adobe AIR based Help templates
have been designed keeping in view the end customer. They have some
high-end navigation features like Mini TOC, Breadcrumbs, etc. Apart
from these capabilities, the new Adobe AIR based Help also empowers
the end customers to customize the Help. An end customer can set
their own preferences and customize Help as desired.
Compelling Rich Branded Experience- RoboHelp Packager for
Adobe AIR provides a compelling rich user experience. It includes
templates that help authors package the same content into three
completely different styles – Multi-Tab Accordion, Uni-Pane
or the Classic Tri-Pane Help. Apart from this it also helps the
Authors brand the Help as per Corporate Branding Guidelines. It
provides support for the addition of a Company Logo and a Punch
line in the main Help window. Apart from this it also provides an
About Box in the Help that details the version, description,
copyrights, logos etc.
Auto Update -Adobe AIR based Help applications provide an
Auto Update feature using which updates can be pushed to all
installed connected versions of Help. Usually, the Help content
bundled with the application is never updated, while the web
content is updated with current feature enhancements and additional
resources. Adobe AIR based Help provides you with the option to
publish updates for your end users at a common server location. The
Adobe AIR based Help is intelligent enough to check for updates and
prompts users to apply updates when it detects a new version is
available.
Review Workflows / Personalization of Help
Adobe AIR based help files can be configured in such a way
that you can add comments to topics and publish those comments at a
common location. This feature enables a complete review workflow,
whether or not the reviewer is a part of your group/organization.
* Reviewers within your network: Reviewers can publish their
comments to an XML file on a shared folder. They can also
synchronize the comments from other reviewers on the same network.
This enable multiple reviewers to simultaneously view the comments
being made by other reviewers as they review.
* Reviewers outside your network: You can send the .air file
to these reviewers who can then export their comments to an XML
file and send it to you. You can import these comments into your
Adobe AIR application.
Apart from the rewire workflow, the feature is designed to
help an end customer personalize Help by adding comments on the
same. These comments will not be uploaded to the server, however
can be exported to a file and shred with friends over email.
New Classic help Template - A new template called Classic
Help has been added. It is named Classic because it is a Tri-Pane
Help. Apart from that it has got all the power of any other Adobe
AIR based Help template. This template has a new feature called
“How do I” that lists all the browse sequences defined
in the WebHelp. We recommend that authors design their browse
sequences in such a way that they provide complete workflow
information to end customers.
Supports Packaging of Merged WebHelp- RoboHelp Packager for
Adobe AIR now supports merged WebHelp. If an author specifies the
WebHelp folder of a Master project, the Packager is intelligent
enough to detect and convert all referenced projects in the Master
Project. However, one needs to be careful while using this feature.
It doesn’t provide as much flexibility as Merged WebHelp. A
new Package needs to be created every time even when you update any
of the sub projects.
In Beta 2, zoom works flawlessly and search results has been
further improved.
If you have not tried the RoboHelp Packager for Adobe AIR,
you can download it now for FREE (Adobe RoboHelp 7 required).
Thanks and regards
Vivek Jain
Group Product Manager, Adobe Systems
Adobe Technical Communication Suite, FrameMaker and RoboHelp
www.adobe.com/products/technicalcommunicationsuite/
blog-
http://blogs.adobe.com/techcomm/
RoboHelp Packager for Adobe AIR-
http://labs.adobe.com/technologies/robohelp/

When you are comparing this to Flash, does this comparison
extend to the requirement for each end user to install the Air
runtime on their PCs before they can access our RoboHelp system?
And that they will also get reminders to update to the latest
version of Air runtime?

What is the preferred anti-virus/malware software for MacBook Air

What is the preferred anti-virusmalware software for MacBook Air?

None is required.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Can i use ms office code for mac air on my macpro instead of purchasing the CD

can i use ms office code for mac air on my macpro instead of purchasing the CD?
Because i just got a new macbook pro and my sister has the macair she purchased ms office for her mac air so i was wondering if i could just use her code or do i have to buy a specific Ms office CD for my kind of mac?

Bibi234 wrote:
can i use ms office code for mac air on my macpro instead of purchasing the CD?
Because i just got a new macbook pro and my sister has the macair she purchased ms office for her mac air so i was wondering if i could just use her code or do i have to buy a specific Ms office CD for my kind of mac?
Office for Mac comes with a single or (for extra cost) a 3 license pack. Unless your sister has multiple user licenses you may not use her code.

Forms max user session 11gR2

Hi,
I have three simple questions, can anyone help me to find out the answers.
What is the max user session for oracle forms 11.1.2.1 version?
If the max user sessions limit reached how can we handle it?
How can i get max user session for forms 11.1.2.1 version through sql code?
Thank You!
Dilli Babu. S

What is the max user session for oracle forms 11.1.2.1 version?
How can i get max user session for forms 11.1.2.1 version through sql code?
Not sure what you mean by "max user session", but since you mention sql code, then I have to think that you mean database sessions. If so, you can check out SESSIONS parameter :
SQL> sho parameter sessions
If you mean something different, please clarify.

Max users for a AIR-LAP1142-A-K9

Similar Messages

Maybe you are looking for