MAX won't let me set the duplex mode of my RT target
We have a problem with speed in transfering data via
TCP/IP protocol from RT system (Pharlap) to Windows PC. For strings of length of 50 kByte it takes around 20 seconds to come to
PC, which is unacceptable for purposes of our real-time system. When runing the
same program and sending strings of the same lenght from Windows LabView on
PC to another PC, things works fine. It seems that this issue with TCP
data transfer speed comes around only when we try to use intentional TCP
data sending in our program on Real Time target. Labview on RT
target works OK, and refresh rates of online data from real-time target on front
panel are normal. Browsing NI discussion forums we learned that there is known
problem with RT 8186 controlers. RT 818x controllers working in Full-Duplex TCP
mode causes serious slowdown and data loss in TCP and FTP communicaton. As a
solution it is recomended to try working with Half-Duplex mode TCP.
The Problem:
So in order to change duplex mode of ethernet card on my
controller I go to MAX->Remote Systems and choose my
system. Then I go to Advanced Ethernet Settings of that system and from
drop-down menu of Media Mode choose 100Megabit/ Half-Duplex Mode (I have 4 modes
offered: 100 Megabit/Full Duplex, 100 Megabit/Half
Duplex, 10 Megabit/Full Duplex, 10 Megabit/Half Duplex . MAX then asks me to
reboot my RT system and I say OK. After the system reboots, when I look under
advanced TCP settings I can see that the mode is still 100 Mbit/ Full Duplex and
that it hasn´t changed. If I try to change mode to anything else offered than
100 Mbit/Full Duplex, there is no change after reboot.
So, the question is: How to force duplex mode of
controller to change? Is there anything I can write to one of .ini files to
change it, or do I need some other version of software
(drivers) maybe?
We are using configuration:
RT Controller NI PXI 8186
MAX 4.0.0.3010
LabView 7.1 Real-Time (on RT Controller)
NI Daq-mx 8.0.0
Intel 8254x Ethernet Driver 1.1.0.3.0 (on RT)
Labview 7.1 (on Windows PC)
RT system and PC´s are on 100 Mbit LAN
Thank you!
I do have to open some ports to set up my Apple TV because of the router I have (I was told this by Customoer Support) and I know what ports to open but there is a fixed number in the IP address section and I can't put in my Apple TV IP address exactly how it reads.
Similar Messages
-
FMLE won't let me set the sample rate with Blackmagic Decklink Studio 2 (Windows)
Hi,
I am trying to set the audio device on FMLE to the Decklink Studio 2's audio inputs. However,
the sample rate sticks to 44.1k and I can't change it to the 48kHz sample rate that
the Decklink defaults to (standard for broadcast is 48k).
Try as I may, it isn't changeable. I seem to remember a similar problem where the
sample rate defaults to the system audio card (on the motherboard) which is at
44.1.
Any ideas on a work-around? The audio from the Decklink is *much* better than
the built in card.....
thanks
jeffOne thing you might try doing is trashing the preference file in your user directory:
~/Library/Preferences/com.apple.compressor.Compressor.plist
Like repairing permissions, this is a bit of a "catch-all" fix, not something specific to this particular problem.
Also, have you tried different file types like: TIFF or JPEG, there could be an issue with output from Fireworks. You could use QT Pro to transcode the file. Sometimes that can work to fix funky problems.
Does the Text Overlay filter work?
BG -
How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?
An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.
-
So I have a problem with iTunes not letting me download anything without first responding to some security questions which I don't remember setting up, how can fix it? Oh, and it won't let me reset the questions either!
If you mean that you aren't getting the reset link, then from the page that you posted from :
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
You can contact iTunes Support in your country via this page : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
I need to change my Apple ID but it won't let me because the email address I want to put is already set as the second email address. I have the new iPhone 5
Hello Krystalb0407,
Thank you for using Apple Support Communities.
For more information, take a look at:
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
You can edit or delete your rescue email address at My Apple ID.
Have a nice day,
Mario -
My Firefox won't let me browse the Internet, even though I'm connected to the Internet.
Excuse me, but my Firefox 3.6 just randomly stopped working. It won't let me browse the Internet anymore-- the error message it always gives me is "Unable to connect", even though I'm fully connected to the Internet. Earlier I opened up Safari and Internet Explorer 9-- both, in which, let me browse the Internet, and I had a full connection. But, whenever I use Firefox now, it says "Unable to connect". And every time I type in a URL on it, Firefox gives me the ''SAME'' error message. I don't know what to do now. I uninstalled and reinstalled Firefox and it does the same thing. So now I am stuck with using Safari, when I really wanna use my Firefox. Why is it doing this?
Make sure you are not set to Work Offline in File menu.
There is a possibility that your connection dropped even briefly, more so if using wireless. Make sure Firefox is not set to "[v] Work Offline" in File menu just above Exit.
By default, Firefox 3.5 and 3.6 will automatically use offline mode if there is no network connection. Under certain conditions, after the connection is reestablished it may remain in offline mode without the user's knowledge. Firefox 4 and newer prevents this behavior by default. To prevent this behavior in versions 3.5 and 3.6, add an entry to the '''about:config''' options, as follows.
* Type '''about:config''' in Location (address) bar
* Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean preference. Name: '''network.manage-offline-status'''. Value: '''false'''
http://kb.mozillazine.org/Error_loading_any_website#Work_Offline_Setting -
Help - i recently made put together a high quality movie for a relative, it has taken me months to complete and it goes for a total of 9 hours and 43 minutes ,however, it won't let me export the video at all! please help - its taken ages to make it!
9 hours??!
Twice the length of a cinema epic?
How are you expecting to distribute it?
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US -
Adobe Download Assistant won't let me accept the Terms and Conditions, freezes computer.
I downloaded the Adobe Download Assistant today, and when the Terms and Conditions pops up, it won't let me click the Accept or Quit button. I'm trying to accept so I can download the trial of Photoshop CS6/CS6 Extended and the program freezes after the Terms and Conditions comes up. Therefore, I can't accept and move on to download.
I tried going to the troubleshooting page for the program and it doesn't have anything relating to this problem.
Thanks in advance!that would be a firewall setting so if your firewall is disabled, that setting is irrelevant.
you could use a direct download of ps cs6, if you follow all 7 steps: http://prodesigntools.com/adobe-cs6-direct-download-links.html
if you see a dl error page, you did not follow all 7 steps.
you can also, uninstall adobe download assistant and try reinstalling. -
when trying to download apps, it's telling me to choose 3 security questions, but won't let me view the 3rd question, can anyone help plz ?
Reboot your iPad and then see if you can set the security questions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Compressor 3.5 won't let me reduce the MPEG2 program file average bit rate
Compressor 3.5 won't let me reduce the MPEG2 program file average bit rate less then 10Mbps. I just installed this new version and it is giving me this problem. I have been delivering an 1hr MPEG2 program streaming at 6Mbps average to 7.1Mbps Max output with Compressor 1 for a year now. Here is my workflow;
Drop the 1440X1080 into NTSC timeline and DO NOT conform so it will be rendering as 720X480 then shoot that sequence to compressor to above settings. It worked just fine for a year. Now, this new compressor wont let me do less then 10Mbps which is the lowest bitrate for HD. The network can not run any bigger file than 6Mbps. I checked my settings restarted and all that. IS this a bug that needs to be fixed? Any help would be appreciated since my deadline is tomorrow.Sorry, meant to say that this only happens with court databases. As far as I can tell, I can download from other sites with no trouble.
-
Satellite L850 - Win8.1 won't let me install the chipset drivers
Hi,
After i upgraded to windows 8.1 pro 64 bit from windows 8 64 bit (pre-installed), i figured that windows won't let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64 bit), but they remain with the windows drivers installed for them.
The device manager shows everything installed and properly using. Also, when the set up was running to install the chipset driver, it skipped most of them, to install only a missing driver (sadly haven't kept any screen to show). I tried to install using the device manager (either auto search or manually browsing in the pc the downloaded files from site), but it keeps saying that drivers are up to date (having drivers with version of 2006, when the latest on site are 2014). Any suggestion of what to do?
Model name: Satellite L850-1MK
OS version: Microsoft Windows 8.1 Pro 6.3.9600
CPU: Intel(R) Core(TM) i7-3630QM cpu @ 2.4GHz
GPU: AMD Radeon HD 7600MProblem solved, after even a deeper google search, i found that if y make a shortcut and add to it a command (-OVERALL), it forcefully installs all components.
Message was edited by: chmpotzolis -
IPad won't let me set up Microsoft Exchange for Gmail
My new iPad 3 won't let me set up a Microsoft Exchange acct for Gmail. In Settings / Mail, Contacts, Calendars / Add Account / Microsoft Exchange I add all of the info, hit next and nothing happens - it just takes me back to the same screen with Next grayed out. I followed the same steps on my iPod Touch and had no problems. Any help would be appreciated.
Quit the settings app and restart the iPad - then try again.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If the email account is appearing on the iPad - delete it and then try adding it back on. -
Compressor 1.5 won't let me reduce the MPEG2 program file average bit rate
Compressor 1.5 won't let me reduce the MPEG2 program file average bit rate less then 10Mbps. I just installed this new version and it is giving me this problem. I have been delivering an 1hr MPEG2 program streaming at 6Mbps average to 7.1Mbps Max output with Compressor 1 for a year now. Here is my workflow;
Drop the 1440X1080 into NTSC timeline and DO NOT conform so it will be rendering as 720X480 then shoot that sequence to compressor to above settings. It worked just fine for a year. Now, this new compressor wont let me do less then 10Mbps which is the lowest bitrate for HD. The network can not run any bigger file than 6Mbps. I checked my settings restarted and all that. IS this a bug that needs to be fixed? Any help would be appreciated since my deadline is tomorrow.Sorry, meant to say that this only happens with court databases. As far as I can tell, I can download from other sites with no trouble.
-
iPhone is stuck on old ID and won't let me change the ID in settings to get into Cloud. Want to sync phone to Cloud before updating the Systems. No such problem on other phone or 2 iPads linked to account. Help!
Thanks Bob,
That was just a typo.
I have three accounts set up in Mail, one of which, apart my the username which is my son's, has exactly the same settings as the one that isn't working and remember it's affecting all my devices.
I would feel happier even if I could create a fourth account on my MacBook Pro using what I know to be the correct password for the server but when I try it keeps defaulting to imap type, I don't get an option for Pop which is what I need.
Oh Bum.
K -
i have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number. also, when i click buy, i get an error message saying, "application not found."
There are two different LR’s, one with a serial-number licensing and one with a CC-signin license.
You should uninstall the serial-number LR you have installed, then
Quit the CC Desktop application,
Restart the CC Desktop application—this will rescan what you have installed and not see LR,
LR will now be on the CC Desktiop apps list, so install that.
Maybe you are looking for
-
Moving standard reports to XML Publisher
Customer wants to use XML Publisher features for the Standard reports. He would like to attach custom templates for the PL/SQL standard reports. If I understand correctly we can get XML output for reports written in Oracle Reports(OR) by setting form
-
About a week ago, my harddrive crashed and we finally ran a scan and got rid of the corrupted data. Unfortunately, the corrupted data happened to be my iTunes library. Everything was wiped--my iCloud stuff, CDs I'd downloaded, mp3s I'd gotten in musi
-
How to mass change posting date of parked logistics invoice verifications
I was wondering if someone can help... We are looking if there is a standard SAP program available to mass change the posting date (to a new date in a new period) for a number of parked logistics invoice verification documents. Example: Invoices are
-
i write a program with applets but i coundn't run it. it gives an error " Exception in thread "main" java.lang.NoClassDefFoundError: welcomeApplet2 " why? i also write its html page
-
Is there really no one who can help me with my question postet 3 days ago!?
I have a problem with blurry images after publishing -Am I really the only one who thinks this is a big problem -I tried to get some help 3 days ago? Is there other forums that can help me on this topic? It looks fine in iweb, but not in the browser