Maxamize browser speed with Airport Express

Safari has recently become soooo slow; I've tried the tips posted by 'Bee" in Sept., 2005, but with no increase in speed and also tried Netscape Navigator and Explorer with no increase in sped. I think the slow speed is the result of my uneducated attempt to set my computer up as a server -- I changed around many of the settings on my airport network., but now I don't know what to change them back to.... What should my network settings be to achieve maximum browser speed? I am using airport express to connect to Road Runner on a G5 iMac.

The Express can only "repeat" or "extend" the quality of signal that it receives. It can help improve the signal strength....but it cannot make the signal that it receives go any faster.
Temporarily, power off the Express and move your laptop around to test the connection. When you see 10-15 Mbps, that is approximately where the Express needs to be located.
Power the Express back up at that location to test the connection.
Another rule of thumb...assuming no major obstructions....locate the Express approximately half the distance from the main router the area that needs more wireless coverage.
If you need full speed where the Express will be located, the only way to achieve this is connect the Express back to the main router using a wired Ethernet connection. The pros do this to maintain full bandwidth on the network.

Similar Messages

Very slow download speed with Airport Express

Hi.
I've recently experienced painfully slow downlink (download) speed using Airport Express.
My WiFi configuration:
- main router: WRT54G connected to my provider (speed limit: 4Mbit up/down link),
- AirPort Express with WiFi N and Airtunes hooked up to stereo in living room,
- AirPort Express WiFi G and Airtunes connected to stereo on bedroom.
Second Airport is currently not used to simplify tests and description of my problem.
The problem: when connecting from MacBook to Airport Express I can't reach more than approx. 512kbit downloading from internet, usually even 300kbit, while uplink reaches easily 2.5Mbit (limited probably by my network provider). While connected to WRT54G I can get 2.5 up to 4Mbit downlink, same when using cable directly plugged in to WRT54G.
I tried changing channels, switching different options in Airport with no effect - still getting pathetic download speeds. Even worse - browsing experience is awful, with frequent slowdowns, etc.
I tried different encryption methods, and seems like only switching it off at all (unprotected network) seems to let my Airport work on full speed (2.5Mbits symmetrically up/down, up to 4Mbits - provider speed limit) - which is unacceptable, I refuse to set up and use unprotected network at home.
Problem is clearly in Airport or in interaction between Airport and Macbook. I've just ran out of ideas - can you help me?

I can't offer any help with your problem except for the fact that mine has recently done the exact same thing. It's ridiculous, for months and months it was extremely fast and then all of a sudden it takes 20 minutes to open a simple browser page. Something is definitely wrong with the airport because all other wireless internet connections from other routers are as usual. \

Slow transfer speed with Airport Express N in an N-only 5Ghz network.

I have a Time Capsule set to 802.11n-only (5GHz).
My new Airport Express N is set to extend such network.
I have a Mac Mini connected via Ethernet to the ethernet port of the Airport Express; however when I transfer files from the Mac Mini to Time Capsule the speed is incredibly slow (1 Megabyte of data every 3-4 seconds).
I know I'm supposed to get 100Mb/s via the Ethernet airport.
Any ideas?

I have the same problem with the 5ghz mode from my time Capsule. The connection is fine until the wireless connection is maxed out, then the wireless conenction drops and I have to click on the airport toolbar icon to get it reconnected (Just click on the menu item...I dont actually have to re-select the wireless network).
Dropping down to the 2.4ghz mode solves the problem, but I want the bandwidth increase 5ghz gives me. Thats why I bought the Time Capsule to begin with.
Some have said that this issue started with Leopard. I cannot confirm this since I didnt have any 802.11n equipment until after I upgraded to Leopard. Also, I noticed that with Time Capsule firmware 7.3 the connection drops but the airport icon stays solid. In 7.3.1 the connection drops and the airport icon greys out (indicating no connection).

Intermittent browser services with Airport Express

Hullo. I am using an Airport Express to access my internet wirelessly. However, since I moved recently I am having a strange connection issue. All of my settings state that my connection to the internet is strong and that I am connected, but about every third or fourth webpage I access it takes an extended time to load, for instance, I can browse through a few pages and then there will be a page that takes about 5 minutes to load. It is not page based or content based as it will happen if I refresh my same page again and again. I have checked with my ISP and there hardware is working properly, and indeed when I bypass my Express everything works fine. Has anyone had this issue that can help me?

The Airports internet connection's Connection Sharing option is set to 'Share a Public IP address'.
The correct setting would be "Off (Bridge Mode)"
My limited understanding tells me that perhaps the Express should be set to bridge mode, to allow the BTHomeHub to handle all of the DHCP, to avoid random DHCP conflicts
That is correct
I could give the Express a static IP, assigned by the HomeHub, and all other connections would be controlled by the HomeHub. Would this be a good first step to take?
There is no need to assign a "static IP" to the AirPort Express, but you could if you wanted to.

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Looks like this is a known issue which has been fixed for Java 8:
https://javafx-jira.kenai.com/browse/RT-23328 "Mac: Impossible to use -splash:<image> with JavaFX 2.2 and JDK 7"

Problem with Airport express N (2nd gen)

Problem with Airport express N (2nd gen)
Firmware 7.6.4
ISP - 20 Mbps ethernet cable
I have MacBook Air 13 mid 2013 os x 10.9.5, ipad 4 ios 8.0.2, ipad4 ios 7.1.2 , iphone 5 ios 7.1.1
When i try to use speedtest.net from my Macbook i got good results of download speed and incredible upload http://www.speedtest.net/my-result/3801286946 (connection 300 Mbps) , both ipads got terrible speedtest download result and incredible uploadhttp://www.speedtest.net/my-result/i/981631804 (connection 150 Mbps), iphone 5 got bad download and great uploadhttp://www.speedtest.net/my-result/i/981695357.
All these tests were done near airport express with really good signal and 5ghz. I tried to choose different channels, 802.11 mode, guest ssid, 5ghz ssid ...
I think that something is wrong with my new airport express. Can anyone help me to solve this problem?
ps sorry for my bad english

As a last resort, try a factory default reset on the AirPort Express as follows:
Power off the AirPort Express
Wait a minute
Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
On an iPhone or iPad home screen....
Tap Settings
Tap WiFi
Look for a heading of Setup a New AirPort Base Station. If it appears.....
Tap on AirPort Express just below the heading to start the configuration process on the Express again
If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

Mac OS X not working with Airport Express but Win XP is ok on the same iMac

Hello everyone,
as the message says I am having troubles with Airport Express.
To say it quickly, I live in a house share in London, and everyone in the house enjoys the wifi without troubles. I do as well with my macbook from every point of the house.
The troubles are with the big iMac: with mac os the internet signal won't just work at all, pages take minutes to load with both safari and firefox, and most of the times the loading times out.
I thought it was a signal power problem, but the weirdest thing of them all is that... when I switch to Windows XP on the same iMac (and right now I am writing from that!) the internet works perfectly!
Then I switch to mac os again... and slow internet again!
Anyone has an idea of what could this be?
Many thanks for the support

Yes, I just discovered this problem on my own machine.
I just wanted to check some settings and discovered that the behaviour of the GUI of Server Admin was somewhat "erratic": First this "no services are configured" message. Some of the configured servers were marked with the usual green "up and running" bullet, others dark grey - those were normally configured and running and clicking the appropriate line seemed to force Server Admin to check the actual state and then turned also green. But sometimes configuration pages were "greyed out", or while switching through the tabs Server Admin claimed that where were "unsaved changes" which should be saved (or discarded).
And then SMB: this was light grey, as usual when a service is not running and clicking on it I browsed through the configuration tabs - everything seemed ok (all my settings were correctly shown, configured as PDC with right domain name etc.) - and I started the service. Then suddenly the configuration settings changed to the default settings - no more PDC, but a "standalone server" with workgroup name "WORKGROUP"...
Looks for me, as if Server Admin lost it's "source" file for the configuration (the file in /var/db/smb.conf says, that it is automatically generated -- does somebody were the source file is stored?)...

Itouch with airport express?

Can you use the itouch with airport express. So you can play music from the itouch on your stereo?
That would be great!

Thanks for that!
Do I navigate to the Signal website via the Safari browser on my iTouch, and then install Signal onto the iTouch? Or do I install Signal onto my desktop Mac, open the app, and then navigate to the URL provided by Signal using Safari on the iTouch?
Kurt
*There is a cunning workaround!*
*Read this article:*
*http://lifehacker.com/software/hack-attack/remote-control-your-computer-with-you r-iphone-300762.php*
*Basically you run a web server application on your Mac (remember to open the ports in 'Sharing') it allows you to log in via Safari (on the iPhone or Touch or any browser) and remotely control iTunes, which of course can be connected to Airport Express.*
*I tried Signal last night and it's pretty impressive, I haven't tried the opensource application mentioned but will do later.*
*So you'll be remotely controlling iTunes, which will probably contain more music than your iPod.*

How do i use my time capsule and extend the network with airport express

I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

Use the search as this has been done to death ..
Bob Timmons is the expert on this.. look at his answers here.
https://discussions.apple.com/thread/4274187?start=0&tstart=0
https://discussions.apple.com/message/21856077#21856077
This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
Apple doco is also good to read.
http://support.apple.com/kb/HT4145
http://support.apple.com/kb/HT4259
Note.
You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

Setting up a multi-zone stereo system in my home with Airport Express

I'm trying to set up an in-home stereo system using iTunes as my main hub. I want to play iTunes as well as Pandora and possibly Sirius. Can I set this up with Airport Express? Would I control everything through iTunes on my MacBook or an iPad? How is this all wired if I have some existing external speakers with a receiver in my family room, built-in ceiling speakers in the kitchen, and outdoor external speakers? I am comparing this to a Sonos system, but the Sonos is not really in my budget.
Also, what is the difference between Airport Express and Airport Extreme? What would I need for this situation? Thanks in advance for your help.

>I want to play iTunes as well as Pandora and possibly Sirius. Can I set this up with AirPort Express?
From iTunes you can stream a single audio source to one or multiple 802.11n AirPort Express Base Stations (AXn), but you cannot stream multiple audio sources to separate AXns. You would need a third-party product, like Rogue Amoeba's Airfoil to stream audio sources other than from iTunes.
>Would I control everything through iTunes on my MacBook or an iPad?
You could do either.
>How is this all wired if I have some existing external speakers with a receiver in my family room, built-in ceiling speakers in the kitchen, and outdoor external speakers?
Of the speakers you mentioned, only the ones connected to the receiver would work directly connected to an AXn. The audio output port on the AXn is a combo 3.5 mm stereo analog/optical digital port. Assuming your receiver accepts either analog or digital audio input, you can feed the output of iTunes or Airfoil from the AXn to the receiver. In turn, the receiver (if configured for whole home stereo) can feed the kitchen and outdoor speakers.
>Also, what is the difference between AirPort Express and AirPort Extreme?
What's similar: Both are Internet routers that provide wireless. Both provide the ability to share an attached USB printer. What's different: The Extreme has a built-in Ethernet switch. The Extreme supports sharing HDDs and printers together or separately via a USB hub. The Express has a built-in audio circuitry, the Extreme does not.
>What would I need for this situation?
Only the Express can accomplish providing an audio stream.

Trying to set up wireless network on PC with Airport Express

I'm helping a friend set up his network with AirPort Express. He's got a modem attached to his PC, and currently has a router that sends a wireless signal to a receiver on the PC in the other room. Now he's added a Mac, and the old router/receiver doesn't work with Mac. So he bought an Airport Express.
I've turned on the Airport, and first I connected the ethernet cable from the modem to the AirPort. Per the AirPort utility I put on the PC, it couldn't find it (got the flashing amber light). So then I took out that ethernet, and I hooked up the ethernet directly from the CPU to the AirPort. Suddenly, it was found, and it took me step by step through the set up. It asked for password info from our internet provider (??why would I have that info??), so we just hit "enter". Then it couldn't set up the network, and said to check the "manage network settings". I've tried everything. Not only can I NOT manage to create a network, but now NEITHER ethernet cable will cause any recognition in the AirPort. All I get is the blinking amber light. I'm about to throw all the computers out the window...it really should not be this difficult. I've set up networks in my own home, before, with both PC and Mac, and never had these problems. So, now, I've had to relink up the old router/receiver in order to send out this call for help. Can anyone suggest anything else to try before I use these computers for target practice?
Thanks in advance,
Jennifer
P.S. The main PC w/modem is on Vista with service pack 2.0...since I can't even get that one working with AirPort, I hardly think it matters what the other computers are...

I had some initial problems too. Make sure that you have the latest Airport Utility in the utilities folder. I used that to correct the problems I had when I first got Time Machine. I recommend resetting everything through there to get it working right.
Mine is not set up to run an n network because my macs are all g and b compatible. Does the airport utility see the time machine? And if so, does it have a green light in the utility?

HP LaserJet 1000 not working with Airport Express

Has anyone had any luck getting a HP LaserJet 1000 working with Airport Express on Windows XP or even OS X for that matter?
I can connect to the Airport Express device using iTunes, but its pretty muched gimped for printing. uggh.
MacBook Pro Mac OS X (10.4.6) D-Link DI-524

I've no personal experience with your particular printer but these pages may help you
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
http://www.ifelix.co.uk/tech/1013.html
Steve

How do I stream rhapsody from my MacBook Pro to my receiver with Airport Express?

How do I stream rhapsody from my MacBook Pro to my receiver with Airport Express?

You will need an application like Airfoil for Mac to be able to stream any audio files on your computer to the AirPort Express.
http://www.rogueamoeba.com/airfoil/mac/

We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

Refresh all your devices before reconfiguring printer to connect to your computer.
a Shutdown computer
b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
d Once router is ready , put back brick at the back of the printer to turn it on
e Wait one minute
f Turn on computer
Repair your disk permission: http://bit.ly/OeD7U3
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website http://bit.ly/ToA1fo
Run firmware update http://bit.ly/AcNqbg

How to output surround sound with airport express N

is this possible? I am streaming successfully with airport express, sounds great with no audio dropouts. I have it hardwired to my router and the AX is connected optical to my surround receiver. Music is only played through my fronts. Is there a way to output surround sound? I can't even choose different audio options through my A/V receiver.

I Found out the problem. When I was hooking everything up, I kept the t.v. on so I can assign audio inputs with the onscreen display. If the T.V. is left on....only stereo outputted. When I turned the t.v. off and with the airport express plugged into AUX, I was able to switch between surround sound settings.
so the moral of the story is, turn off video devices when you just want sound, especially if they are hooked up to the AVR with HDMI.

Maxamize browser speed with Airport Express

Similar Messages

Maybe you are looking for