MAXDATAFILES in Control File differs from initSID.ora: Server v8.0.5 on HP-UX 11.00

Maybe it's because I've never looked before, but I have never before noticed a database which has been started with a pfile containing
"db_files = 80"
and yet displays
"MAXDATAFILES 30"
when I dump the control file to trace.
Views? and thanks up front

Similar Messages

How to Serialize a file path from client to server?

I am using serializing concepts in java. I am stuck, that how can i send only file path from client to server?

Um, ill take a wild guess and say that youre trying to
access a file on another computer using that path?
That wont work.
What could the other computer possible do
with that path unless both computers are networked to a
common drive, or if they are networked to each other in a way
where the root in the file path would point to the same place
on either computer?

Custom logging, multiple apps in one file, different from server.log

I have several applications running on my integration server. I would like to log from these apps to a single file (different file from server.log)
I tried to use custom log4j logging, but there's a problem with the RollingFileAppender. Whenever a file is rolled, the backup copies are deleted. It probably happens because different classloaders load different apps and I configure the log4j in every app, but I don't understand classloaders.
Here is a part of the log4j.properties file:
log4j.appender.file=org.apache.log4j.RollingFileAppender
log4j.appender.file.File=/path/log
log4j.appender.file.maxBackupIndex=10
log4j.appender.file.maximumFileSize=10485760and I configure the logger in every app by
org.apache.log4j.PropertyConfigurator.configure( logPropertiesPath );(Is this wrong? Is it even possible to use one log file from different apps? The integration servers does it...)
I don't need the log4j, if the internal logging can be set up to log app. messages to a different file and configured with a different layout pattern, it would be enough.
Can anybody please help with my logging problem?

I've tried this:
I've put log4j.jar to the lib dir of the logicalhost and log4j.properties to another jar (my own) and put it to the lib dir too. I deleted the PropertyCOnfigurator.configure() line from the apps. Built it, manually deleted log4j.jar from the EARs. Then I deployed EARs, restarted the domain and ran the apps. They both logged to the same and correct file, but again the rolling didn't work. How is this possible? I thought that this way the IS should have one and only one instance of Log4j...

Is 5d mark II raw (CR2) file different from CR2 file from 5d? Adobe Camera Raw error on mk II not 5d

I use Photoshop Camera Raw plugin (Adobe) to preprocess color, then finish image preparation in Photoshop. Never a problem opening CR2 files, usually from my own 5d camera. But a customer sent a few CR2 files that won't open (error says it is wrong kind of document). So far no explanation or fixes from Photoshop users... thought I would ask the Canon experts. Why would CR2 file from 5d mk II fail but CR2 files from 5d all open ok?
Still using Photoshop CS2, and the Camera Raw plugin is v 3.7. I really want to continue this workflow (works for me), prefer not to experiment with dpp or other possibilities. Not ready to upgrade yet to Photoshop CS6.
Solved!
Go to Solution.

I have a photographer friend who has used Photoshop for years and basically never used anything else. He bought his 5D III from a store which was offering a free copy of Lightroom with the purchase. He didn't buy because of the incentive... he bought his camera and a copy of Lightroom came with it. He put it on the shelf to collect dust.
One day we're out shooting and somehow get onto the topic of how he's processing his images and I mention Lightroom to him (I use Aperture, but that's for Mac users only -- he's on a PC). He tells me has it... it's on the shelf... he never installed it.
I gave him my "are you crazy" look and then proceeded to tell him why he needs to learn to use Lightroom. He now pretty much just uses Lightroom and is much happier for it.
I'll sum up (again... I'm an Aperture user but Lightroom was designed to fend off Apple from taking over in photography.)
Photoshop is NOT made for photographers. It's made for people working in graphics arts and publishing, etc.
Apple, recognizing that the tool was awkward for photography made a tool targeted specifically at professional photographers...and Aperture was born. Adobe, seeing this as the very real threat that it is, realized they'd better get busy. Adobe produced Lightroom. Both are targeted to photographers and NOT to those in graphics arts or publishing.
I think of Aperture and LIghtroom as being outstanding at image management for large collections of photos and also outstanding when you come back to your office with cards loaded with images that now all need to be processed.
This is a painful long and tedius task of opening things image by image in Photoshop.... but a breeze to do in Aperture or Lightroom. You don't actually open images... you import the entire contents of the card into your library and now you can breeze through them apply adjustments as needed. Some types of global adjustments such as "white balance" can be applied to every image in the shoot as long as it was taken in the same lighting. No need to do that image by image... you adjust one, then select all the other images shot in the same light and tell it to apply the same adjustments. Don't try that in Photoshop... you'll injure yourself.
Lastly... Photoshop is a "destructive" editior. You can take precautions to try to make sure you don't actually edit any original data, but the tool WILL let you change original data if you aren't careful. Aperture and Lightroom are non-destructive by their very nature.
I find that with Aperture or Lightroom that I still do need to open an image in Photoshop. Aperture and Lightroom can't do everything. They do not, for example, allow you to create composit images by combining elements of multiple other images. But I will say it's not often that I need to open something in Photoshop anymore.
If you are a photographer and you've been using Photoshop because that's what you know... you _really_ need to evaluate one of the tools which were actually intended for use by photographers.
Tim Campbell
5D II, 5D III, 60Da

File transfer from a FTP server to another External FTP server

Hi,
I have one FTP server , I need to transfer a file from this FTP server to aother external FTP server. Could any one please help me how to write a batch file on FTP server so that my file is transfered to another FTP server by executing the Batch file. I don't want to use SAP server for this.
best regards
bobby

CREATE CONTROLFILE
Caution:
Oracle recommends that you perform a full backup of all files in the database before using this statement. For more information, see Oracle9i User-Managed Backup and Recovery Guide.
Purpose
Use the CREATE CONTROLFILE statement to re-create a control file in one of the following cases:
All copies of your existing control files have been lost through media failure.
You want to change the name of the database.
You want to change the maximum number of redo log file groups, redo log file members, archived redo log files, datafiles, or instances that can concurrently have the database mounted and open.
Note:
If it is necessary to use the CREATE CONTROLFILE statement, do not include in the DATAFILE clause any datafiles in temporary or read-only tablespaces. You can add these types of files to the database later.
An alternative to the CREATE CONTROLFILE statement is ALTER DATABASE BACKUP CONTROLFILE TO TRACE, which generates a SQL script in the trace file to re-create the controlfile. If your database contains any read-only or temporary tablespaces, that SQL script will also contain all the necessary SQL statements to add those files back into the database.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_54a.htm#SQLRF01203

Exported file differs from that created in workspace

Hi,
I have created a 5 minute movie which is bookended by two different After Effects animations.
When I preview the movie in CS4, and even in Media Encoder, it plays perfectly. However, the exported file (I have tried WMV and AVI) puts the introductory After Effects animation at the end of the movie as well, in place of the one which it is supposed to end with!
I basically have my introcuctory animation both at the beginning and at the end, despite the fact that it doesn't appear this way in After Effects, Premiere CS4 or Media Encoder.
Any clues?!
Many thanks

Are the AE Comps Dynamically Linked, or did your Export from AE, then Import them into PrPro?
Good luck,
Hunt

Local_listener name is different from listener.ora

I'm on 11g R2 solaris10 platform.
lsnrctl status adv_sec_listener2 shows all the correct items I would expect including the Alias = adv_sec_listener2
but when I do lsnrctl status listener_farley it shows the same thing with Alias = adv_sec_listener2
My listener.ora file is set with adv_sec_listener2
In the spfile it has local_listener=listener_farley
I try to edit the parameter and set local_listener to adv_sec_listener2 but I get errors:
ORA-02097: parameter could not be modified
ORA-00119: invalid specification for LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'ADV_SEC_LISTENER2'

is your listener registered with all instances in the server? if so, its new from 10g that all instances will listen through one instance
try to see the ouput of
$ lsnrctl status <listener_name>
and check if all instances are shown

Write to binary file different from 8.0 to 8.2?

I am communicating with a device via USB and am using a method setup by the USB driver programmer. To communicate, I write to a binary file with a filename of \\?\COMx. This has been working fine for about a year in mfg with Labview 8.0. I recently "upgraded" to 8.2 and now it does not work. If I save for a previous version and run 8.0 it works fine. How can I make this work with 8.2?

Yi Y,
The USB device is one of the instruments we manufacture. The USB driver is written so writing to the USB port is just like writing to a file. I use the binary read/write VI's to send and receive commands to this USB device. The filename I use is \\?\COM#. I am told by the USB driver creator that this is common for low level C. I have been using this VI for that last year and recently upgraged from 8.0 to 8.2 and it does not work. I run the same vi under 8.0 and it works fine. This is not a common way to communicate, so will probably not get an answer.
My next question is, is there any way to run an 8.0 dll or vi from an 8.2 executable?
Thanks
Hi dgtest1,
Which USB device you are using, and which driver are you using? I'm trying to figure out specifically how you are communicating with the USB device by writing a binary file and how was the binary file written. Could you please post more information to describe in more details about what your set up is doing?
Thanks!
Yi Y.
Applications Engineer
National Instruments
http://www.ni.com/support

SWF file different from internal movie testing

ok i made a basic website in flash when i test the movie
while my file is open everything works fine, no errors pop up or
anything, but when i go to drag the swf file into a web browser,
random movie clips as well as all of my buttons are missing and the
code dosent work like it should, I have absolutely no idea why my
file works in one place and not another so if anyone can give me
any feed back at all id appreciate it

I would recommend trying different browsers if you haven't
already. I am working through a similar issue with a dynamic Flash
menu and it is veryyyyy different in IE then in Firefox. Also, if
you have a test site we could look at that might get you more help
too.

Help swf file different from internal movie testing

ok i made a simple website and when i test it while the file
is open it works fine but when i drag the swf file into a web
browser random movie clips are missing, my buttons are gone and the
code dosent work right, Im totally clueless as to how to fix this
since it works fine and with no errors in my flash file so if
anyone has any idea what i should do that would really help cuz im
outta ideas

"Laur56" <[email protected]> wrote in
message news:e4g5hf$btf$[email protected]..
> ok i made a simple website and when i test it while the
file is open it works
> fine but when i drag the swf file into a web browser
random movie clips are
> missing, my buttons are gone and the code dosent work
right, Im totally
> clueless as to how to fix this since it works fine and
with no errors in my
> flash file so if anyone has any idea what i should do
that would really help
> cuz im outta ideas
Check for publish version not matching the player. If
publishing for player 8, make sure your browser has that version of
the
player.
tralfaz

File download from client to server

I am trying to set up a JSP/servlet to download a file from the client to the server in a webapp.
The solution I thought about was to post a form using a <INPUT TYPE="file" > element
But this does not work! In the form, I am setting the encoding to ENCTYPE="multipart/form-data" and I am wondering if that causes the problem.
Is it possible to do what I want to do? Am I doing it the right way?
Thanks

hi hacot
u can do it by using a servlet. In your html form u have done the rigth thing (INPUT TYPE and ENCTYPE).this ENCTYPE will take care of the input data and convert it into a stream. capture this flow of stream using a servlet's getInputStream() method. Detect the header part and the body part of that stream...and try to print the body part in the console and u will get an idea , about how to parse the stream's body part.

Upload and Download a JAR/JAD file to/from a Web Server

How do I upload the JAR and JAD file to the Web Server?
And once deployed on the Web Server,how can I down load this.
I have written a small MIDlet.
I would like to upload this to my Web Server(I have Apache running),and then
I would like to download this and test this,
Please can any suggest.I am testing this on Siemens m50.
Ajay

You should configure your web server to send the correct mime types
for .jad and .jar extensions
Ivan

Save media file captured from client to server

Hi all,
I need to capture webcam at client side and save it to the server.
I am thinking of two solution:
1) save file to client computer then upload to server.
2) streaming to server simultaneously while capturing.
If I choose the second method, I should you the RTP feature right (I don't have exp with it)? Or the first method is better?
Thanks you all
Regards
K.

If your usage scenerio doesn't involve the word "live" then you want to avoid anything that involves the term "real-time" as any actual real-time system intentionally drops data anytime the processing gets behind.
Option 1 is going to be easier to implement, but option 2 will save the user some time. Option 1 is going to be less hardware intensive, so it really depends on whether or not you want to (1) invest more work upfront to make your program terminate faster (2) care whether or not your users have to wait there while the file uploads after the recording ends (3) want to give your users the ability to review the video before they upload it (which I would recommend for most applications).
I'd definately just do option 1 unless you have a good reason to need option 2.

ORA-00210: cannot open the specified control file

Hi all,
Initially we faced the following error:
ORA-00214: control file '+DBDG/dws/controlfile/current.256.638648487' version
75647 inconsistent with file '+FLASHDG/dws/controlfile/current.256.638648489'
version 75645
Then the following action:
RMAN> restore controlfile from autobackup;
Starting restore at 05-DEC-07
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=997 devtype=DISK
recovery area destination: +flashdg
database name (or database unique name) used for search: DWS
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: +flashdg/DWS/AUTOBACKUP/2007_12_04/s_640476511.697.640476513
channel ORA_DISK_1: control file restore from autobackup complete
output filename=+DBDG/dws/controlfile/current.256.638648487
output filename=+FLASHDG/dws/controlfile/current.256.638648489
Finished restore at 05-DEC-07
RMAN> recover database;
Starting recover at 05-DEC-07
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 12/05/2007 15:16:10
ORA-00210: cannot open the specified control file
RMAN>
Any idea why this is happening?
Regards,
Soma Sekhar Karri

Something which you should have looked up prior to posting
00210, 00000, "cannot open the specified controlfile"
// *Cause: Cannot open the controlfile.
// *Action: Check to make sure the controlfile exists and is not locked by
// some other program.
Sybrand Bakker
Senior Oracle DBA

Bursring control file from Lunix to windows server

Hi all
I have devloped an rdf file to return payment data I want to store the output on sharefolder on windows server is it possible to move the file (FTP) from the application server which is Linex to my windoes server using XML Bursting Control File ?
If it is not could you please direct me to correct way
Thanks.

I write bursting ctrl file to save the output file from concurent program to be saved on other location on the same server it executing normaly without error but when I check the directory ther is no file there =c02/TEST/apps/apps_st/appl/xx/12.0.0/bank/
<?xml version="1.0" encoding="UTF-8" ?>
- <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
- <xapi:request select="/ABC\LIST_G_CUSTOMER_REFERRENCE_NUMBER\G_CUSTOMER_REFERRENCE_NUMBER">
- <xapi:delivery>
<xapi:filesystem id="FILE_DELIVERY" output="/c02/TEST/apps/apps_st/appl/xx/12.0.0/bank/" />
</xapi:delivery>
- <xapi:document output-type="excel" delivery="FILE_DELIVERY">
<xapi:template type="rtf" location="xdo://XX.ABV.en.00/?getSource=true" />
</xapi:document>
</xapi:request>
</xapi:requestset>

MAXDATAFILES in Control File differs from initSID.ora: Server v8.0.5 on HP-UX 11.00

Similar Messages

Maybe you are looking for