MaxDB 7.3 Restore issue

Hi,
I'm trying to restore a 7.3 MaxDB across to a test server so that I can upgrade the Content Server. I'm getting the following error :
-24988 sql erro [util_execute INIT CONFIG]; -902,Message not available,wrong path specified.
Any help here would be greatly appreciated. I'm new to MaxDB and the there are very little resources out there for 7.3
Regards
Neil

Thanks for your response Thorsten. I did look in the knldiag.err and found this error:
wrong path 'C:\sapdb\CHD\dbsys\SYS' (dated 2014-09-04 15:39:58) Noticed that that file was there in the source system, but unable to copy across as it was in use (probably) as the db was up and in use. I went in to initialise the target dba and got it to create it's own 'SYS' file (under this structure) and this error has not been logged in the knldiag.err file since.

Similar Messages

I'm having restore issues, help please!!!

this has probably already been answered, but got new 8gb iphone today plugged it in etc it crashed tried to reboot and reconnect to itunes, told to restore tried failed error code 13 checked forum changed usb bingo it starts to restore, now though the progress bar on the phone is full but on itunes it's saying it's still waiting for iphone been like this for almost an hour can anyone help, i've not even made a phone call from it yet!
Message was edited by: sscsukltd

sorry... can't help, not having these "restore" issues (yet...) and I've done 4- Restore to Backup the past week and two "restore to new Phone" and no issues... other than the fact that with a "Restore to New Phone" my 3rd party data app's are not "recoverable" as with the "restore to backup"

Tivoli/TSAFS.NLM Restore issue

I am trying to restore a server using Tivoli and Storserver on the front end. I keep getting errors( server detecting system error). Storserver/Tivoli said this is a TSAFS.NLM error. I see a Novell TID dated Oct/05 that eludes to this problem( 10099433). The fix does not work. Tivoli is suggesting that this is a known issue with Novell and a fixed TSAFS.NLM should fix the problem. Our current date/version TSAFS.NLM is Aug 14, 2007/6.52.08.
Do we need to update/ back rev this NLM, or is there a specific fix?
Thank you,
Pete

Originally Posted by ataubman
You don't say specifically: is it the issue in the TID of not backing up files that have square brackets [] in them? Or a more general problem? You mention getting errors whereas that TID says there are no errors registered, the files with [] just don't back up. So it seems to me likely that TID does not in fact relate to your problem at all.
Also you say the fix in teh TID did not work. What exactly from the TID did you do?
START:
Here is an update of what we did that helped much, but we are still getting errors. This was my e-mail to Novell support:
This is in regards to our Tivoli/Storserve restore issues....
We did as you said as to TID 10089094 and TID 1009433 reloading the NLM
TSAFS with the switch:
/NoConvertUnmappableChrs
This DID help as we were able to restore much more with fewer errors. But we are still getting the errors I explained to you in the original call on many
files.
I ran a restore against two known files that give us these errors from
the original backup dated March 27. I have attached the DEBUG TSAFS log
as per TID 10097645.
END of e-mail to Novell support...But they have escalated to next level as we are still getting SOME errors of the same....I will update this thread as I get more...
NOTE: Intrestingly, we had to restore a second server. Using this switch from the start, we did NOT get any errors...
Stand by/
Pete

IPad 2 restore issue.

i wonder is anyone can help.
after having my iPad 2 for 3 years with no problems, suddenly it just got stuck on the Apple logo and would not charge up. Aftear assuming I had somehow damaged the mains port, I took it to an iexpert who took a look and diagnosed a software issue. He took it back to basics and I took iPad home to sync with iTunes, being confident that iCloud would do its job and restore all my bits and bobs.
so .. My issues
IPad wouldn't recognise my password so eventually updated password via security questions , still didn't recognise, updated again - all good.
Then plugged it into iTunes on computer and logged in using my iTunes AppleID ( I have 3 and blame the Apple Genius in Manchester !!!)
Firstly it brought up the initial Apple Id , from an old email, which the Genius suggested I didn't change as wouldn't be using .... Issue 1. - I have most of my Apps either downloaded or purchased on this old account which I cannot locate as I do not know the password and even when I go through the 'forgot password' option - it does not recognise my date of birth and I am stuck as I can't ask it to send me an email to an account that no longer exits. I am only concerned about 1 app which I paid around £7 which has artwork stored on it for my work, which I cannot access.
issue 2 - finally logged in with latest Apple ID ( set up when purchased 6+) after password fight (above) I left it to restore for about an hour. It took longer than an hour but it seemed to have finished, apart from the fact that most of the Apps we still faded and could not be accessed. I assumed they were still loading but in fact it was quicker to delete and reinstall most, as they were free ones. Then went to take a look at backup status on iCloud and it says as it's currently being restored, it won't back-up until compete. I have no idea why it said it had completed , when actually it's still doing it or not. I seem to have all my emails and photos and it's still saying the download is 7gb, so I know the info is available ... It's just not 'finished'
i Have no idea what to do next, should I plug back into iTunes ?
so.... 1. Any Idea how to access the one app I have paid for on old Apple if and has stored info on and 2. How can I ensure that the iPad has finished restoring ?
APologies for waffling, it's quite difficult to explain in writing .. Any help greatly appreciated

An option ( and not a bad one) if you aren't too comfortable with tech stuff is to go dow to the Apple Store. They have outstanding customer service. Did the upgrade seem to complete successfully, or did this error come up sometime before it ended? You might also look at this kBase article...though again if you are close to an Apple Store, they are great to work with.
http://support.apple.com/kb/TS1275

Fusion drive and backup/restore issues

Hi,
since I installed a fusion drive on my early 2008 iMac, consisting of an internal 256GB SSD and an (external FW800) 320GB hard disk, I occassionally run into trouble when system updates are pending. In the past, at worst the time machine backup couldn't be restored and I had to reformat and reinstall the system from scratch - which is not really comfortable!
Currently, running Mountain Lion, when I try to select the startup disk, it complains that Boot-Caches on the Boot-Helper-Partition cannot be created. Nevertheless the system starts fine (and runs fast ;-).
Before upgrading to Mavericks, I would like to know
- if someone else ran into similar problems with fusion drives, when updating/upgrading system software.
- Is it normal that a Time Machine backup cannot be (completely) restore a Fusion drive?
Yes, I know that having the harddisk part of a fusion drive externally is not recommended/supported by Apple - and my Mac is nearly 6 years old, but that would not explain why system updates/restores nearly always fail and sometimes the Time Machine backup drive has a broken file system (needed reformatting)! And I always checked the disks with Disk Utility prior to updating...
Any comments are appreciated.

You can file feedback here. The more who file the more the faster the issues may be fixed.
Also you shoud look on the CCC forums.

2008 Enterprise R2 : Image restore issue on domain contoller : LDP, DNS, NETLOGIN failed : failed test DNS

Dear All,
I need your help in order to resolve issue i got. I have domain controller, and additional domain controller in production and both were working fine untill i restore image on 'Domain Controller' and after that i was not able to browse 'AD'. I checked and
came to know that NETLOGIN service was PAUSED. i fixed that issue but when i went to Additional Domain, that machine was not able to find Dmain. i realise that DNS/LDAP is not working. I run the command "DCDIAG /TEST:DNS" just to check the connetivy,
and found DNS connectivity sissue on Main Domain controller. Please help me with the issue.
Window Server 2008
Domain Main : GTMAIN : 192.168.0.1
Additional Domain Controller : GTMAIN2 : 192.168.0.2
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator> DCDIAG /TEST:DNS
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = GTMain
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\GTMAIN
Starting test: Connectivity
Although the Guid DNS name
(0d76309b-aebd-4f7e-b024-d0c3f380c1b1._msdcs.goldteam.co.uk) resolved
to the IP address (87.82.208.116), which could not be pinged, the
server name (GTMain.goldteam.co.uk) resolved to the IP address
(fe80::5efe:192.168.1.1%12) and could be pinged. Check that the IP
address is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your
firewall settings.
......................... GTMAIN failed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\GTMAIN
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
......................... GTMAIN passed test DNS
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : goldteam
Running enterprise tests on : goldteam.co.uk
Starting test: DNS
Test results for domain controllers:
DC: GTMain.goldteam.co.uk
Domain: goldteam.co.uk
TEST: Basic (Basc)
Error: No LDAP connectivity
Warning: adapter
[00000014] Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t)
has invalid DNS server: 192.168.0.100 (<name unavailable>)
Warning: adapter
[00000014] Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t)
has invalid DNS server: 212.135.1.36 (<name unavailable>)
Error: all DNS servers are invalid
No host records (A or AAAA) were found for this DC
TEST: Dynamic update (Dyn)
Warning: Failed to add the test record dcdiag-test-record in z
one goldteam.co.uk
TEST: Records registration (RReg)
Error: Record registrations cannot be found for all the network
adapters
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 192.168.0.100 (<name unavailable>)
2 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.168.0.100 Name resolution is not functional. _ldap._t
cp.goldteam.co.uk. failed on the DNS server 192.168.0.100
DNS server: 212.135.1.36 (<name unavailable>)
2 test failure on this DNS server
Name resolution is not functional. _ldap._tcp.goldteam.co.uk. fai
led on the DNS server 212.135.1.36
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: goldteam.co.uk
GTMain PASS FAIL PASS PASS WARN FAIL n/a
......................... goldteam.co.uk failed test DNS
C:\Users\Administrator>

Thanks for the response.
DC1 :Main Domain Contoller: Issue @ momemnt because of restore. seems to me DNS is working/responoding
along wiht RPC but i can see that DNS service is started?
DC2 :Additional Domain Contoller: Healthy but i am not able to login on AD on that server becuase of
below mentioned issue
Naming information cannot be located becuase: the target principle name is incorrect
I am confused that if i downgrade the DC1,
how about if i am not able to recove AD?
which process should i adopt?
Thanks

Iphone 6 restoring issue

I got a new iphone this morning at 1030 am and it has been restoring from icloud backup for almost 10 hours now. Is something happening here or does it take this long?

I am having the same issue! I received my new iPhone 6 plus from atnt yesterday at 10am ... activated it and asked phone to restore from my sprint iPhone5s backup at 10:30 am. It is now 2:17pm the next day and most of the apps that are incomplete are still incomplete right now. What can I do to fix this or do I have to just wait?

When I try and open the camera it just closes again and doesn't activate the lens, is it a restore issue or a hardware issue and happened out of the blue

The camera function wont open and connect to the lens it just closes again with showing any error, do I need to restore the I Pad or is it a hardware issue
Thanks

Before you go restoring the iPad, try this first. Close the camera app and reboot the iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the camera app icon. Tap the home button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Newbie Automatic restore issues

Hi:
I have two issues with a program I am working on to do an automated restore, The restore takes a backup from production, and replaces the database entirely every day so we have offloaded current information: I avoid logical names because we don't want a
database named production:
FIRST ISSUE:
I would like to be able to drop the database. When I drop it interactively, I always click the box close existing connections: The problem is what to do with an interactive connection: Is there any way with an automated restore replace to intrinsically drop
the database? Although it's not something you normally want to do, it is something in this case that I HAVE to do to ensure the restore works and the with moves move the correctly named files.
SECOND ISSUE
When I run the following statement:
USE [coll18_FinAidNoHR]
DBCC SHRINKFILE (N'coll18_production_log' , 0, TRUNCATEONLY)
GO
I get the following error:
Cannot shrink log file 2 (coll18_production_log) because the logical log file located at the end of the file is in use.
(1 row(s) affected)
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Is there any way to work around this without programming?

As for question 2-thanks for all the info on DBCC SHRINKFILE I think the best decision is to do it as needed.The
Restore is a knottier problem. I can't to a restore replace because I want to change the file names. I can't have the logical names.
I run a prestep before my restore that does this common stuff:
if exists (select * from sys.sysdatabases where name = 'FinAidNoHR')
EXEC msdb.dbo.sp_delete_database_backuphistory @database_name = N'FinAidNoHR'
if exists (select * from sys.sysdatabases where name = 'FinAidNoHR')
ALTER DATABASE [FinAidNoHR] SET SINGLE_USER WITH ROLLBACK IMMEDIATE
if exists (select * from sys.sysdatabases where name = 'FinAidNoHR')
drop DATABASE [FinAidNoHR];
The restore step fails with this error:
Executed as user: CAMPUS\UCCTD10_SQL. Exclusive access could not be obtained because the database is in use. [SQLSTATE 42000] (Error 3101)
When I run an SP_WHO it DOES show the database open in a sleeping state on a remote machine that did not shut down the instance, but this DROP should have had the effect of an interactive drop with close existing connections checked.
When I did other tests like selecting top 1000 rows from another test database,SP_WHO shows it open in the same way but the DROP works fine.
Before I tear out what little hair I have left, can anybody tell me why it would not drop the connection?
(It was my boss's PC)

HT1267 Iphone restoration issue

Hi
I was restoring my iphone via itune and the restoration was not completed due to incomplete disk space. I cleared the disk space and restarted itune. When I tried to syn it again, I received this error message: this iphone cannot be used because apple mobile service not started. How to resolve this issue?
Regards
Ken

Make sure you've got atleast 2-3GB space on the hard drive of the computer where your operating system is installed.
Download the latest version of iTunes : http://www.apple.com/itunes/download/
After installing, try restoring the iPhone once again
This should solve your issue!

RSA1 - Source system(R3 - BI) restore issue

HI Everyone,
I am trying to restore my source system(R3) from BI from RSA1. iam getting some error.
Error:
Source system cannot use any of the proposed connection names
Message no. RSAR362
Diagnosis
Every connection to a source system is named using a unique two-digit identifier. Source system SAPSQ1 does not accept any of the proposed values.
The last proposed value was BA.
System Response
Source system has not been connected.
Procedure
If you want to recreate the source system from BI information, then you can only use a single value, namely BA, because the connection already has this name in BI.
Delete the existing connections in the source system or contact a BI consultant.
I checked the table RSBASIDOC also. The Target BI logical system is not present. CHecked the partner profile & IDOC Ports also.
RFC connection is also working fine
We recently performed R3 system refresh
please help me resolve this issue since its a critical issue which neds to be resolved immediately
thanks & Regards,
Siva

If you have done system refresh then to restore the connections you have to follow the below note as per your scenario
Note 886102 - System Landscape Copy for SAP NetWeaver BW
Only then the connection can be restored

Live cache restore issue

Hi All,
We are facing the below error while restore the LC MAXDB database.
Source version : 7.9.08.10
Target Version : 7.9.07.09
dbmcli on SU4>db_state
OK
State
OFFLINE
dbmcli on SU4>db_start
OK
dbmcli on SU4>db_state
OK
State
ADMIN
dbmcli on SU4>db_online
ERR
-24988,ERR_SQL: SQL error
-9407,System error: unexpected error
3,Database state: OFFLINE
Internal errorcode, Error code 6433 "system_error"
20017,RestartFilesystem failed with 'System error: unexpected error'
13,Could not execute migration, because migration check failed
20000,Assertion of state The software version is too old failed!
The persistent version is: Version = 7.9.8.10
dbmcli on SU4>version
OK
version,os,dbroot,logon,code,swap
"7.9.07","UNIX","/sapdb/SU4/db",True,ASCII,1
Please advice.
Regards,
Yuvaraj M B

Hello Yuvaraj M B,
first, update the target database to the vestion of the source database kernel including the LCAPPS.
Then run the copy procedure using backup/restore.
See note 457425.
Pay attention to Reason and Prerequisites section:
"4. The same liveCache version is installed on the target host and the source host."
Regards, Natalia Khlopina

Restoring issue

hello,
today I woke up to find my phone (iPhone 3Gs) was not working correctly; my internet and other features would not function along with other issues. I figured a simple fix was to restart my phone so I did so. when I turned the phone back on it showed up with a picture of a usb cable and a disk saying I needed to plug the phone into iTunes.
I did so and nothing happened so I tried to restore my phone to the factory settings but for some reason it wont allow me to do so. it gave me an error (3149) and told me an unexpected error had occurred.
Any help with this issue would be appreciated.

Try it on another computer or check if you have a firewall blocking accessing Apple servers.
http://support.apple.com/kb/ts1275
Error 3000-3999: (3002, 3004, 3013, 3014, 3164, 3194, and so on) Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an entry in your hosts file redirecting requests to gs.apple.com, or due to your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

IOS 7.04 and configurator 1.4.2 backup and restore issues

I have 20 brand new iPad air's and I am trying to establish a base image in configurator, then use that to restore from as a mass deployment option. I created the backup from the first iPad air succesfully, I installed a few apps via configurator and tweaked icon placement via itunes, I also changed a few settings from the device, wallpaper, bluetooth, and I turned on reduce motion. I am able to backup the first device succesfully in configurator, when I attempt to restore then next device it errors out with a message "Could not restore backup code 4 domain com.apple.configurator.operation.error". I have tried manually proceeding past the greeting screen, rebooting the mac running configurator, restoring the device via itunes, and recreating the backup image. It continues to fail with the same error. The frustarting thing is that i cannot find a table to tell me what these error codes mean, so im left in the dark as to what is causing the issue. does anyone have any ideas?

I have gotten this resolved, but as to how i got this accomplished I am unsure. I ended up deleting the backup image I had created, and starting over from the beginning. I then created a backup at each step of the process, then tested it to see if it failed to apply. At no step in the process did the process fail, so I dont have a clue what change was the culprit. The last issue I'm having, which appears to be fairly widespread, is that when the image is applied theres a 3-5 minute hang where it stays in the "waiting for device to be ready" state. Im not overly concerned about this but it is a pain to have to wait so long for each device to finish. Anyone have a clue about this?

IPhone: 1.1.4/Restore Issues

I'm trying to upgrade my iPhone to 1.1.4 on my MacBook Pro. I successfully download the package and the software extracts, but when it gets to the "backing up iPhone" screen, it appears to hang and then after a couple minutes my iPhone restarts and I get "iTunes could not sync because iPhone is disconnected." What the ****?
I've tried updating on 2 Macs--NO GO!
I've tried restoring on 2 different Macs--NO GO!
I've connected it to a PC and tried updating and restoring--NO GO!
I've trashed the updates in my library\itunes\iphone software updates--NO GO!
I've created a second account and tried using the new iTunes--NO GO!
I have a lot of text messages that I'd like to save with Syphone so I don't want to do a hard reset on the iPhone itself unless I absolutely have to. Does anyone have any ideas as to what I can try next?
Remixlab

Not an expert by any means but I did go thru a pretty hectic time getting my iPhone--sync issue right.
Try Opening iSync. --->open preferences ---->reset sync history.
Reset your phone.
(Not sure if running disc utility will help--->repairing disc permission.) can't hurt.
Restart your computer.
Sync. w iTunes.
Hope this helps... The calvary will be here soon.

MaxDB 7.3 Restore issue

Similar Messages

Maybe you are looking for