MaxDB configuration file - SAP System Rename

Hello,
I am new and tried to make a System Rename with SWPM.
We have maxDB.
After a few steps the setup wants you to choose a maxDB configuration file which was used for installation of the source system.
Does anyone new where I can find this configuration file?
I tried a few cfg files but nothing was correct.
These files here are not correct, I tried.
Configuration Files - SAP Documentation
Thank you so far and well greets.
Stefan

Hi Deepak,
Thanks for your suggestion but there are no existing enteries for MaxDB in the windows registry.
We are facing an issue while renaming the database. Kindly refer to SAP Note : 1427931
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
Best Regards

Similar Messages

Sabrix related configuration in SAP system

Can anyone let me know, what are the necessary configuration we need to do in SAP system to use Sbrix for the tax calculation?

Hi,
Logical port you can create in two ways.
One using LPCONFIG and other is using the SOAMANAGEr.
When you create a logical port using LPCONFIG you get the Customizing transport request which is client dependent. you can move this to any land scape. Only the thing we need to do change in the port is just accessing URL.
But the latest transaction SOAMANAGER does't give any transport number. I guess there should be a way for this too. If not then there is only one choice left is configure on each client.
Thanks,
Kishore.

SAP SID Rename using SWPM

Hi All,
I am trying to perform SAP <SID> rename using SWPM 1.0 SP6 and getting the following error.
<html> <head> </head> <body> An error occurred while processing option System Rename > Central System > SAP System Rename( Last error reported by the step: The JVM reports an exception during execution of class ( com.sap.sdt.ins.component.ora_clone_db_post_dia.DiSchemaUsersAndListener_validator ) and function executeStepClass. DIAGNOSIS: The reported error message from JVM is: com.sap.sdt.sltoolbox.kdb.KdbException: no server version found in /oracle/<SID>/11203
at com.sap.sdt.ins.component.ora_clone_db_post_dia.DiSchemaUsersAndListener_validator.updateTOraCopyInformation(DiSchemaUsersAndListener_validator.java:168)
at com.sap.sdt.ins.component.ora_clone_db_post_dia.DiSchemaUsersAndListener_validator.execute(DiSchemaUsersAndListener_validator.java:70)
.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more information about the error. </li> <li> Stop the option and continue later. </li> </ul> Log files are written to /tmp/sapinst_instdir/NW70/SBC/CENTRAL. </body></html>
FYI: I have unmounted the source <SID> file systems and monuted back with target <SID>
Could you please do the needful.
Thanks and Regards,
Prasad

Hi Srivastava,
Thanks for the quick responce !!
Yes, it is mentioned in the System Rename Gude(Page# 22).
https://websmp205.sap-ag.de/~sapidb/011000358700000664952012E
Unfortunately it is not writing the error logs at OS level other than attached
in my previous message.
Thanks and Regards,
Prasad

SCOT - How to send a mail from mail server to a SAP system

Dear SAP colleagues,
With SCOT you can configure the SAPConnect administration.
You can easily configure your SAP system to allow the send of email from SAP to your mail server.
Exemple :
1. SID SAP : DL1
2. Mail server : sn1exch.lec.local
3. Target email : "myeamailaddress"
Send email process 01 : 1. DL1 ==> 2. Mail Server ==> 3. You read your email in your inbox "myeamailaddress"
My problem :
From my inbox "myeamailaddress", I want to be able to send email to SAP (Dl1).
Send email process 02 : 1. My inbox "myeamailaddress" ==> 2. Mail Server ==> 3. SAP (DL1).
Question :
Do you have any help to configure it ?
Thanks in advance for your input.
Best regards
NetWeavAdmin

Dear Olivier,
I do not have a specifi technical problem.
Let's summarize - my request concerns a SRM Workflow :
I am ordering an article. When the order is higher than 2'000 USD, I need to get the approval of my manager.
That's the workflow.
Workflow :
1. I am user in DL1 SAP System.
    UserName : CharlesN
    In SU01,
    charles(a)green.com
2. From DL1 SAP system, I order articles. The order total amount is higher than 2'000 USD.
    In the workflow, an mail from DL1 is automatically send to my manager in his MS-Outook inbox.
    (manager(a)green.com)
3. My manager reads the mail I have sent him and give his approvals by clicking on a approvals button.
    When clicking the button, an mail must be automatically send from my manager MS-Outlook inbox
    to DL1 to CharlesN inbox in SBWP in DL1 SAP system.
I have configured SCOT and read OSS Note 455140.
The SAPconnect virtual host is activated in DL1 (SICF).
I think a miss a step in our mail server to relay a mail from MS-Outlook to my SAP system.
Any suggestion is welcome.
Best regards

How configurate a SAP System Registry in Web Dynpro ?

Hi everybody,
When i deploy a web dynpro application,
i obtain the following error:
"No default system is configured in SAP System Registry"
In menu Window->Preferences->SAP AS Java,
i need to register SAP instance.
However, i don't know how to retrieve the following information of my SAP system:
- Instance Host ?
- Instance Number ?
Need your help!
Thanks
Rodolphe

localhost
0

One SLD means rename of SAP system after transport?

On development got the situation of having naming conventions for SAP boxes like R3DCLNT100 within the configuration directory. Do I have to rename manually my systems after a transport to Q into R3QCLNT100?

Hi Yuki
Does it matter what transport system you are using? File transport system or the CMS?
Normally, you define a business system as transport target, which is different from the business system the transport target is being defined for.
If we have the requirement to have the following transport targets:
BS_MJD (Dev) -> BS_MJQ (Tst) -> BS_MJP (Prd)
we should always define a target for that system?
Best regards,
Marco

Error phase Install Common system files SAP NW 7.1

Hello
I have a problem in my installation of SAP NW 7.1 for PI
I was installating the SAP NW but I stopped it and deleled this system (SID=TPI), then I started again the installation (SID=PI1) but in the phase Install Common System Files i got this message:
sapint_dev.log
           CJSlibModule::writeInfo_impl()
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO       2010-07-09 17:30:13.765
           CJSlibModule::writeInfo_impl()
File system node D:/usr/sap exists already. Nothing to do.
INFO       2010-07-09 17:30:13.765
           CJSlibModule::writeInfo_impl()
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921 [ianxbservi.hpp:244]
           CServiceHandle::Open(ClusSvc)
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR      2010-07-09 17:30:14.234 [sixxcstepexecute.cpp:984]
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING    2010-07-09 17:30:14.437 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2010-07-09 17:30:14.437 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO       2010-07-09 17:30:45.921 [sixxcstepexecute.cpp:1072]
An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories".
INFO       2010-07-09 17:30:48.640 [synxccuren.cpp:1016]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS)
           lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS.
   LOG sapint.log
INFO 2010-07-09 17:30:13.296
Execute step createFirstSystemDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0
INFO 2010-07-09 17:30:13.750
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
File system node D:/usr/sap exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR 2010-07-09 17:30:14.234
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING 2010-07-09 17:30:14.437
Could not get property IDs of the JavaScript object.
ERROR 2010-07-09 17:30:14.437
FJS-00010 Could not get value for property
I had found information about saploc however still I got the same
The installation is on Windows 2003 + Sql 2005
Any suggestion    for this problem
Thanks
Danny

Hello
I deleted the system with the wizard on sapinst
NetWeaver Process Integration 7.1 Software Life-Cycle Options Uninstall Uninstall ‒ SAP systems or
single instances .
Danny
Edited by: Danny Sanchez on Jul 12, 2010 4:17 PM

Was advised to delete system configuration file from hard drive and now computer will not start - any help would be appreciated.

Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.

Boot the MBP with the OPTION+COMMAND+R keys down. The result should be a display showing a revolving globe. By following the instructions, you will be able to reinstall the original OSX. Then you may reinstall Yosemite.
A solid Internet connection will be required.
Ciao.

How to call an EXE file on a remote system from SAP system?

Hi Friends,
I want to execute an EXE file existing on the remote system from SAP system. Could some one give me an idea of how to execute that?
Thanx in advance,
Ram

Hi Ram,
Try this
SXPG_COMMAND_EXECUTE
Reward if this helps,
Satish

Error while opening PDF file created in SAP System

Dear Friends,
We have customized transaction through which a Inspection Lot gets generated with predeifned Inspection Characteristics data. User enters the reading in that Inspection Lot and SAVE. In another customized transaction, this Inspection Lots gets Released and when released, SAP System generates PDF file through this custmized program and send it to repspective Mangers through SAP Inbox for view. Before 07.10.2010, this was working correctly. On 08.10.2010, our Basis team has applied patches provided by SAP. Afte that the generated PDF file can not be open. Error message shows that this file is damaged OR corrupted.
We wrote to SAP support but they advise to contact DAP Forum for the customized program, SAP supprt will not help.
We need help to overcome this issue.
Regards,
Jayant Joshi - Bahrain

Hi,
Find out the FM that's generating the actual error through de-bug and analyze the same by looking in OSS and or SDN.
Regards
Narasimhan

MM configurations for SAP AFS System

Hi,
        I'm working in MM configuration for SAP AFS production system, After uploading AFS Materials successfully and also created Purchase order to make a stock for that material, but PO created successfully but not able to do Goods receipts for created PO.
       Errors : Purchase order xxxxx has no items,
Once created sales order for the same material again we got the error while GR but error is different.
      GR is not possible for this PO number.
But material type is ROH , and its external procurement only.
Please let me know when we will get this type of errors.
Thanks and regards
Nisar.

Hi Nasir;
Some possible causes are;
1.     Defining inbound delivery (Or kind of a confirmation) in the PO LI level and not maintaining the document subsequently
2.     Not releasing the PO before the GRN
3.     Creating the PO with a material with Grids (AFS Basic Data Screen) and not maintaining the grid value at item detail level of the PO
Azwath Mohammad
http://www.sapafs.net

Hi, what's the impact of creating sites through configuration in Sap retail System?

Hi Experts,
Business requirement is to have a production plant created through config in retail system and then ship the finished product to DC using STO's and Dc will be created as master data in retail system. please share your experience on business impact on this integartion of production plant and site in Retail?
Thanks in Advance !

Hi Govind,
In SAP Retail system, the options for creating plant from configuration is disabled. Means in SPRO screen, the execute button is not there for these options. So you will not be able to create plant through configuration in SAP Retail system where the retail switch is activated.
All the Retail related features will not support that plants.
To the best of my knowledge, Site created in Retail system using WB01 transactions can be used for production cycle to implement manufacturing scenario. Using article to article stock transfer you can transfer the stock of Finished Goods articles to trading articles and so on.
Various processes are available for this.
Let me know if you need any more information.
Regards,
Amit

Receiver File Adapter - Create File on another SAP System

I am working on a project that includes this requirement: PDF files to be copied from a third party company via SFTP to a directory on our ECC system.
We have worked out the sender side config, and the transfer of the files into PI works fine via SFTP.
However, the PDF files are ending up in a directory on the PI system and not on our ECC system as expected.
The receiver communication channel is set up as follows:
Party = blank
Communication Component = communication component of the ECC business system
Adapter type = File
('Receiver' is ticked)
Transport Protocol = File System (NFS) (etc)
Target directory = /tmp (using this temporarily for testing)
I would have thought using the ECC business system would mean the files would end up on that system, but instead they end up on the /tmp directory on the PI system.
We are not permitted to use FTP between our SAP systems, so I can't go with that option.
I've searched for help on this and only see conflicting and vague statements about whether the NFS protocol can or can't be used for transfer to another SAP system in the landscape.
Any suggestions and help on the above, and the best method of transferring the files to the end SAP system would be very appreciated.
Regards,
Christine

remember that NFS means that it is referring to a file system on PI server.
What you could do is mount a space on SAP PI onto SAP ECC so that ECC will be able to access the files on SAP PI.
Guess that should solve the problem.

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

Synchronous file adapter sender side configuration in sap pi

Hi Experts
synchronous file adapter sender side configuration in sap pi
can you explain any one tell me step by step procedure?
Regards
Sagar

Hi,
You can use RequestResponseBean in the sender file adapter module .
RequestResponseBean (SAP Library - SAP Exchange Infrastructure)
Request/Response Bean for IDOC_AAE adapter
Instead of IDOC_AAE adapter you can use FILE adapter.
Regards,

MaxDB configuration file - SAP System Rename

Similar Messages

Maybe you are looking for