MaxDB Version 7.6 parameter settings

Hi
We implemented SAP Content Server 6.40 on Solaris and MaxDB 7.6.3 with Build 05.
Can you please suggest on whether we can implement u201CNote 814704 - MaxDB Version 7.6 parameter settings for OLTP/BWu201D on SAP Content Server 6.40 (MaxDB 6.6.3 Build 05).
Or
We need to implement any other note on Production Server.
Kindly suggest on this,
Regards,
Panu.

> We implemented SAP Content Server 6.40 on Solaris and MaxDB 7.6.3 with Build 05.
Then go and install the current patch.
Stop using software that's years old when newer better versions are available!
> Can you please suggest on whether we can implement u201CNote 814704 - MaxDB Version 7.6 parameter settings for OLTP/BWu201D on SAP Content Server 6.40 (MaxDB 6.6.3 Build 05).
Yes, please implement the OLTP parameter recommendations!
regards,
Lars

Similar Messages

MaxDb version compatibility

I currently have a MaxDb 7.3 running and want to upgrade the database to the newest version. Do I need to go to 7.5 first and then on to 7.7?
Also, if I need to go to 7.5, where can I find an install pkg that has the graphical installation manager?
Thanks,
Bob

Hello Bob,
If you are SAP customer, you will find the answer on your question in the SAP note::
1004973 Additions to MaxDB version upgrade to 7.7
Please update the thread with additional information:
Are you SAP customer?
What is the database version?
 < Please post the build information.
 The version information for the database software is provided according to the following notation:
 <major>.<minor>.<servicepack>.<build> >
 What is the value of the database parameter _UNICODE?
 < The direct upgrade to 7.7 is not supported by databases of Version 7.3.00 with a non-Unicode database catalog.>
If you are SAP customer =>
 What version of SAP kernel do you have on your system?
 What is the OS of the database server?
Thank you and best regards, Natalia Khlopina

MaxDB versions released on Linux

Ls,
I want to install MaxDB version 7.6.0.35 on Linux 5.6 but i get an error: "MaxDB version 7.6.0.35 is not released. Released Min. versions are: 7.6.03.09 : 7.7.02.19"
I also have MaxDB database running on 7.6.0.35 on Linux 5.5. For this environment a Linux upgrade to 5.6 is planned. Will this coarse issues for MaxDb?
In the PAM i found:
released Database Version     Operating System                              Date              Status       System Status     Remarks
MAXDB 7.6 64-BIT                      LINUX REDHAT EL5/X86_64 64BIT      24.07.2007       Released
but the info does not go further then release level, nothing about SP level or build level.
And in case this is only a check during the installation where can i manipulate this check?(like adjusting oraparam.ini when installing Oracle 10g on Linux RHEL 5)
thanks in advance
Peter

ok, so i got it working (just sharing the info) by adjusting the control.xml:
in function checkForExtendedReleases(cdversion)
replaced:
            if(row == undefined) {
               installer.showWarningPopupOrExit("dbmodada.generic", warnText);
               return false;
by:
return true
Installation finished successfully. Only afterwards i thought adjusting CDLABEL.ASC would have been enough may as well....
Big question now: is this a supported combination. I suspect it was nothing more then a check in the installer which was build in before RHEL5.6 was released....or something like that. Anyone knows?

What is the latest prod. supported MaxDB Version w. SAP Content Server 6.40

What is the most actual supportet MaxDB Version when using with SAP Contentserver 6.40?
In PAM Page 5 (of the Powerpoint) the official Version should be 7.5.
In "install and Upgrade" NW 7.0 there is the "NW 7.0 Presentation - MaxDB Release 7.6.03" available for Download and the "MaxDB RDBMS 7.7.06 Build 10 - Windows Server on x64 64bit "
Does that mean, that the 7.7 Version is official supported for Production?
Searched the Notest but found no answer for that.
Ulrich
... half an hour later ...
just found MAXDB 7.7 Installation which suggest the 7.7 is the latest official supported.
could that be the answer?
Ulrich
Edited by: Ulrich Neumann on Feb 2, 2010 12:39 PM

Hello Ulrich,
Please refer at SAP link http://service.sap.com/pam for full platform availability information of the new version. SAP Content Server is shipped with NetWeaver 2004s SR1.
< service.sap.com/pam -> SAP NetWeaver 04 -> Database Platforms -> Content Server
 Select in MAXDB section u201CWINDOWS SERVER... u201C >
< according PAM :
MAXDB 7.6 64-BIT is released on WINDOWS SERVER 2003/X64 64BIT for
SAP CONTENT SERVER 6.40 >
As you know the SAP installation guide for Content server is available at::
service.sap.com/installations -> SAP Components
->SAP Content Server -> Release 6.40 and higher
< Installation - Standalone Engines >
For additional information and documentation please go at SAP link:
http://service.sap.com/ContentServer
-> FAQs SAP Content Server
Thank you and best regards, Natalia Khlopina

IDES IS GETTING UP AFTER PARAMETER SETTINGS-----DAMN URGENT

hi frnds,
i made parameter settings in the spfile in the IDES SERVER as,
ALTER SYSTEM SET parallel_threads_per_cpu=2 SCOPE=SPFILE;
commit;
ALTER SYSTEM SET parallel_max_servers=10 SCOPE=SPFILE;
commit;
ALTER SYSTEM SET replication_dependency_tracking=TRUE SCOPE=SPFILE;
commit;
from the next second onwards my ides system's dispatcher is stopped and the ides system is not getting up.
now i want to delete these parameters so that i can make the ides system up.
i want to delete these parameters completly from the database..
WHICH COMMAND IS USED TO DELETE THEM COMPLETELY FROM THE DATABASE.

Hello. Read Note 601157 - Oracle9i: Server Parameter File -->
in this note SPFILE - Restoring an Inconsistent SPFILE
Regards.

Parameter settings for windows - Note

Hi,
Can anyone help me to know the SAP note number for default Parameter settings for windows .
I want to verify all the parameter values.I tried to find out the number, but no luck
We have severe performance issue in our D01 and Q01
Thanks is advance.
Regards,
Prakash

Hi,
Most of the performance parameters are OS independent. You need to check ST02 and check most of the SWAP comings in which area and there you can click on detail analysis menu which will give you parameters for the buffer settings. You need to adjust these parameters in instance profile in RZ10.
Also, if your database is oracle10g then make sure that SAP note 830576 should be implemented.
Thanks
Sunny

Storage Parameter Settings for Cube

Hi , Thank alot for such a wonderful suggestions, We have 25 millions of records going to cube so for high load performance on cube Can you check and help me Data Base Storage Parameter Settings. can you tell if
Fact Table
1. Data Class for fact tables is DFACT or should i change to any other
2. Size 4 >150 MB or should i change to any other
Dimension Table
1. Data Class DDIM or should i change to any other
2. Size 0 <500 K or should i change to any other
Help me with this.
Thanks
Poonam Roy

Hi,
I don't think that we need to some extra settings at cube , if want to go with Acceletor.
I am not able give good info on it,because I have not yet worked on it. But if you spend some time to go through all the mentioed links,Definately You would not have any doubts on it.
Also refer the help link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/48c0417951d117e10000000a155106/frameset.htm
If you donot have chance to use acceletors, then I suggest you think about Data marts (no of cubes with same structures and with ssame datasource) which holds physically have different range of data.And then use a Multi provider upon it.
And also use Cache methodology for the reports built on these cubes.And use precalculattion to heat up the cache.
Also check the 1025307 note.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma
Message was edited by:
Anil Kumar Sharma

Apex Version 4.2: Why doesn't the session timeout parameter settings work?

Prior to an upgrade to Apex Version 4.2.0.00.27, we ran Apex Version 4.1 in our environment. This is on a platform using Oracle Database Enterprise Edition 11g R2 on Windows Server 2008. The session timeout parameters (set for a single application using "Shared Components" -> "Security Attributes") were set to the following:
Maximum Session Time: 1 day
Maximum Session Idle Time: 8 hours
This worked with no problems in Apex 4.1; our user would leave a data entry form open for several hours, complete the data entry then submit the page. Now, with the upgrade to Apex 4.2, doing the same thing causes the system to redirect to the login page and aborting any edits or new data entered into the form previously.
I have tried to set both session parameters to ZERO (0) which is what the documentation explains is the equivallent to "no timeout" but that didn't work as well.
I have reset the session control parameters to what they were before the upgrade and my session times out before the time values I set. (on the version 4.2 upgraded instance).
Why was the session timeout parameters I set ignored by the system? Can anyone else out there confirm/repeat the problem I observed?

Hi Richard,
You probable have it ok, but the time should be in seconds.
Kees

Explanation for DB parameter settings with version 8.

Hi,
I would like to get hold of some documentation that explains the "DB2 Profile registry" parameters and also provides an insight into performance aspects when these parameters are changed.
For example-
CATALOGCACHE_SZ
LOGBUFSZ
UTIL_HEAP_SZ
BUFFPAGE
LOCKLIST
DB2_REDUCED_OPTIMIZATION
DB2_INLIST_TO_NLJN
DB2_MINIMIZE_LISTPREFETCH
DB2_ANTIJOIN
DB2_EVALUNCOMMITTED
Though standard SAP Notes are available that provide start up values for the above parameters, i would like to get documentation explaining the purpose of these parameters and their impact on performance.
thanks for your time.
regards
shaibal

DB2_REDUCED_OPTIMIZATION
DB2_INLIST_TO_NLJN
DB2_MINIMIZE_LISTPREFETCH
DB2_ANTIJOIN
DB2_EVALUNCOMMITTED
are no initial values. They are recommended and should be set as requested by SAP.
BUFFPAGE is used as default for newly created bufferpools. If you need new bufferpools you should create it by specifying its size and don't rely on the default value.
The other parameters you have mentioned (CATALOGCACHE_SZ,
LOGBUFSZ,UTIL_HEAP_SZ,LOCKLIST) are really initial setting and need to be tuned. For this you need to check e.g. the package cache quality to tune CATALOGCACHE_SZ or the number of lock escalation to tune LOCKLIST. All those dependencies between snapshot counters and db config parameters are described in the "System Montioring Guide and Reference". The documentation gives you some rule of thumbs, but I suppose nobody can tell you exactly how much performance for example a log buffer overflow costs and how often it can occure before it has to be seen as a problem which causes a performance problem.

AIX related Parameter settings...

This is related to BW 3.1C on AIX 5.2 (pSeries 690) and Oracle.
We are at 64-bit 6.40 kernel patch 66 and SAP_Basis and SAP_ABAP is patch level 47.
My question is specific to AIX related parameters as I am not able to find a very good information from notes.
I am reviewing a Earlly Watch report and not able to understand the AIX specific parameter.
Following parameters are my concern.
EM/TOTAL_SIZE_MB - 262144 MB (recommended 26301 MB)
ES/SHM_MAX_PRIV_SEGS - 64 (recommended 8)
ES/SHM_PROC_SEG_COUNT - 63 (recommended 7)
ES/SHM_SEG_COUNT - 4096 (no recommendation)
ES/SHM_USER_COUNT - 4096 (no recommendation)
ES/TABLE - SHM_SEGS (no recommendation and I understood the purpose of this parameter.)
ES/SHM_SEG_SIZE - 256 (recommendation 2048)
Our Physical memory is 32Gb and OS Swap is 26GB. As this is AIX, do I have to worry about the parameter em/initial_size_MB. it is set to 4Gb and we are planning to increase to 8GB. No recommendation SAP. but when you multiply ES/SHM_SEG_SIZE * ES/SHM_MAX_PRIV_SEGS, it comes to 16GB. So should I have to extended memory em/initial_size_MB to 16Gb or the EM/TOTAL_SIZE_MB will take care of it. I have read the IBM redBook that ES model ignores the em/initial_size_MB (Do not knwo what do they mean by this). Our model is IBM eServer pSeries 690.
I am just trying to find out the calculation/relation among these parameters to justify the team so that they are not off the limit.
Please help me and I will be really grateful to your advice.
Please let me know if you need more information.
I will appreciate your help.
Thank you.
SC.

Hello SC,
To clarify further.
The relevant notes in one place for 64-bit AIX memory management
in one place are as follows for you kernel version:
#146289 Parameter Recommendations for 64-Bit SAP Kernel
#789477 Lots of Extended Memory on AIX (64-Bit) as of Kernel 6.20
#425207 SAP memory management, current parameter ranges
#153641 Swap space requirement for R/3 64-bit kernel
When settings mentioned in the attached notes are used for AIX
64-bit systems as recommended then only EM/TOTAL_SIZE_MB is used
for the total instance extended memory, em/initial_size_MB is
ingored and the only reason to set this to the new value of
note #95454 is for the SAPPFPAR information to be more accurate as
it is looking at value em/initial_size_MB as for other Unix platforms
that don't use ES/TABLE = SHM_SEGS. The value em/initial_size_MB
will be ignored for all memory management settings purposes.
Because I suspect that ztta/roll_extension is set to 2GB then
the current values of ES/SHM_MAX_PRIV_SEGS and ES/SHM_PROC_SEG_COUNT
are not reached. The note #789477 goes into more details about
these parameters.
If RAM resources are 32GB and no other instances is on the
server then the recommendation for EM/TOTAL_SIZE_MB is made
for 26301 MB so that this is the new pool for total EM for this
instance. According to note #789477 this can be higher in some cases
and even surpass the RAM but the Early Watch team have determined
that this is the correct value. Other recommendations should
be reviewed contained in note #789477 also.
In case of any errors similar to those of note #352604, I would
suggest you review the parameters mentioned there and in note
#789477 also about these potential errors that may occur in the
future for a heavily used instance.
The references to em/initial_size_MB for SAPPFPAR are related to the
segment count in total for AIX. This was very important for 32-bit
AIX systems as there was such a shortage of available segments
for pool 10, 40, SAPOSCOL and other keys. It was important to
get the sappfpar segments as close as possible to the real value
so that you could optimize the pools etc. I many cases the
recommendation was still to ignore the segment cound in sappfpar
and manually count the used segments but all this information is
redundant for you and doesn't apply.
There are no such shortages for 64-bit and so the value is of
little importance in this case. You should therefore set
em/initial_size_MB to the same value as EM/TOTAL_SIZE_MB just
so they match. The actual SAPPFPAR output for the pool 10 and 40
sizes will not be affected by this and therefore you can use
the recommendation here for the sizing of the parameters of each the pools.
Regards, Mark

Determining OS Kernel parameter settings in HP ITANIUM

Hi
Can any one help me out to determine the depedant OS kernel parameters settings in HP IA-64 for Oracle database 10.2.0.4 after increasing the processes parameter value in the database level .
As after increasing the processes parameter to 10000 , we are getting n number of issues related to one or the other OS kernel parameter , so we want to take one single downtime and settle all the issues.
Regards,
Phani Kumar P

Hi
Acutally we already increased the processes parameter to 10000 by modifying nproc value to 30000 , now we are receiving issues respect to database as below and inturn there is problem in getting connected to the database giving ora-12502 error
Errors in file /ora/newdump/ACEPROD/udump/aceprod1_ora_4712.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-27504: IPC error creating OSD context
ORA-27300: OS system dependent operation:bind failed with status: 227
ORA-27301: OS failure message: Can't assign requested address
ORA-27302: failure occurred at: sskgxpcre3
kkjcre1p: unable to spawn jobq slave process
Tue Jan 5 18:28:57 2010
Errors in file /ora/newdump/ACEPROD/bdump/aceprod1_cjq0_20387.trc:
So now we want to fix the issues by setting optimal values for OS Kernel parameter for NPROC value equals 30000.
Regards,
Phani Kumar p
+919948677317

Missing IDES ECC5 installation disk for SAP Kernel - MaxDB Version

Hi,
Our HQ sent us installation disks for IDES ECC5. We copied them all onto our server and started installation. The system is now informing us that it can't find the SAP kernel information.
I can only assume that we're missing one of the installation disks.
We're desperate to get this installed and it will take another week for our HQ to send through another disk. Does anyone know whether we can download this from somewhere? We have had a look on SAP marketplace but you only seem to be able to download the kernel for Oracle, MSSQL and DB2....no MaxDB.
Additionally, if there is somewhere in Asia we can download this, then that would be better as we are having internet problems when connecting to Europe and the US.
Thanks in advance!
Tristan

Hello Tristan,
This is not the correct forum to post your question.
You was not asked about the database(MAXDB) kernel software.
You need SAP kernel software
-> Review the installation guides at service.sap.com/instguides ->
mySAP Business Suite Applications -> mySAP ERP -> mySAP ERP 2004
-> SAP ECC 5.0 ->
Installation Guides of SAP ECC 5.0 SR1
-> < Please see the steps 'How to Proceed' > ->
-> MySQL MaxDB
< Part I: Planning and Preparation
Part II: Installation and Post-Installation >
-> select the documents for the OS of your server.
And the document from the 'Part I: Planning and Preparation' you will get information that you need the SAP kernel CD & & what is the minimum required version & the reference to the location at the SAP Marketplace to download it, if you don't have the required SAP kernel CD.
< You could download the CD from service.sap.com/installations ->
Entry by applicataion group ->
Installations and Upgrades -> SAP NetWeaver -> SAP NETWEAVER->
SAP NETWEAVER 04 ->
Installation and Upgrade ->
< OS> -> < database > -> CD 'SAP Kernel ... <database><OS>.
SAP kernel software is database, platform, Unicode specific. >
In the 'Part II: Installation and Post-Installation' document you will find the the list of the required DVDs for the SAP system-ABAP installation.
-> Are you running the installation of the the 'Central Instance', 'Dialog Instance' or 'Database instance' ?
For the 'Database instance' Installation you need:
SAP Installation Master DVD
SAP Kernel DVD
RDBMS DVD
SAP Export DVD
-> What CD/DVD do you have for the installation?
< You could download the CDs from service.sap.com/installations ->
Entry by applicataion group ->
Installations and Upgrades -> Entry by Application Group
-> SAP Application Components -> SAP ERP-> SAP ERP 2004 -> Installation and Upgrade -> <OS> ->SAP DB >
You could also order the CD, if you have problems with download from the SAP Marketplace.
Thank you and best regards, Natalia Khlopina
PS: SAP Note 19466 will give you information about download of SAP Kernel Patches.
Message was edited by:
Natalia Khlopina

Dreamweaver Help | Version Control and Advanced settings

This question was posted in response to the following article: http://helpx.adobe.com/dreamweaver/using/version-control-advanced-settings.html

FlashBanger wrote:
Why am I getting an "Image is not inside the site." alert?
It could be because you haven't defined/setup your site. In DW you always need to define a site before you can do anything. I suggest read this part 1 tutorial to get the idea.

Error loading control. a newer version needed. the default settings will be used

Hi I am using LabVIEW DSC 7.1 for programming my application. My VI contains NI hypertrend which I am publishing on a browser using the web publishing tool. When I open the web browser on a different computer I get this error- Component works Error loading Control. A newer version needed. The default settings for the control will be used. I have disabled firewall, pop up blocker etc...but for some reason it keeps giving me the same error. I read the knowledge base and it talks something about the .OCX file. I am not sure what I am supposed to do..I also have the DSC runtime installed in my machine. I'd appreciate it if someone could help me with this.

If you're on a 64-bit OS, OCX files must be in the folder: %windir% \ SysWOW64
and not in %windir% \ System32 (only for 32 bits OS)
>> %windir% is the environment variable that defines the Windows folder! (eg: C:\Windows)
French version:
Si tu es sur un OS en 64 bits, les fichiers .ocx doivent se trouver dans le dossier : %windir%\SysWOW64\
et non pas dans %windir%\System32
>> %windir% étant bien sur la variable d'environnement qui défini le dossier de Windows ! (par ex: C:\Windows)

PSAPTEMP default storage (Parameter settings)

Hi there,
I am trying to increase INITIAL and NEXT values for default setting of PSAPTEMP. Using sapdba version 9, under Tablespace, when I select the INITIAL and change value, the value gets reset to default 1024K. How can I extend these values. Do I need to drop and recreate or can I do it online.
Regards,
Jeet

Dear Jeet,
first of all: don't use sapdba anymore.
It's not developed anymore and the recommendated tool is now br*tools.
See note
12741 - Current versions of SAPDBA and BR*Tools
for details
Concerning your question:
When you've got a locally managed temp. tablespace (as it is recommended) then the INITIAL and NEXT values should be identical and the allocation type for the tablespace should be UNIFORM.
The exact value for this parmeters depends on the sort_area-size used in the database.
The formula looks like this:
( N * sort_area_size ) + 2 * db_block_size
db_block_size is 8K in SAP systems and the N depends on the size of your PSAPTEMP (tempsize):
N = 1 : tempsize <= 2 GB
N = 3 : 2 GB < tempsize <= 6 GB
N = 5 : 6 GB < tempsize <= 10 GB
N = 10 : 10 GB < tempsize
All this - in more detail - can be found in these notes:
164925 - Storage parameter of tablespace PSAPTEMP
659946 - FAQ: Temporary tablespaces
Hope that helps.
Best regards, Lars

MaxDB Version 7.6 parameter settings

Similar Messages

Maybe you are looking for