Maximize Graph on Screen to full screen

I am looking to simply take a waveform graph and when I click a button next to it, I want to maximize it to full screen size. Whn I mess with teh bounds properties, the buttons at teh bottom of the graph dont grow accordingly and it appears messed up. Any recommednations on how to proceed with this?
Solved!
Go to Solution.

Here is a crude way; you may have to play with it if you don't want all of the controsl to resize.
CLA, LabVIEW Versions 2010-2013
Attachments:
resize.png ‏30 KB

Similar Messages

In normal view, half the page disappears off right of screen. in full screen this does not happen. what can be done to correct the screen ratio for normal screen?

version 5 loaded on windows 7. all went well for a while. one day while using, ratio of normal screen doubled in width; i.e. half the page disappears off the screen to the right (on a wide screen). when full screen mode applied, ratio is fine. it only happens in normal view, which is the usually prefered option. I cannot determine any means within the program to resize the normal screen. nothing else is affected, only mozilla firefox in normal view. not that when program is opened from keyboard the page is correct for a moment, then enlarges the width with 1/2 page dissappearing.

This issue can be caused by the Babylon Toolbar 1.1.8 extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Why is there a grey block on the bottom of my screen in safari and i cant see the top of my screen in full screen mode?

When I put the window into full screen mode a gray block appears across the bottom of the screen. Thus the top of any given web page is truncated upward and I cannot access anything...But if I minimize the view what was once unavailable reappears.
Is there a way to get rid of this gray block?

Provide computer and OS version info and maybe we can help. Phone and iOS stuff tells us nothing useful.

Playback only stutters in preview screen, not full screen.

Brand new iMac 5k, maxed processor and graphics driver, and loaded up with 32gb of ram. Files live on internal 1tb drive. Originally 1080p 30fps MP4 with h.264 codec. Have created proxy, have optimized, have used compressor to switch to prores format. The files play, freezes, then plays again and freezes. Occasionally I get a dropped frame alert when playing on timeline or when previewing original file. Files do not stutter when doing full screen playback! I have turned on and off background rendering also. This is my first foray into FCPX so any help is appreciated. Timeline is set to match the frame rate of clips when I load it in. Beta testing the new Yosemite, could that be it?

Same here. I sent feedback to Apple since this stuttering didn't occur for me before the beta. I suggest you do the same.

Multiple Screens with Full Screen App

Wondering if there is a way to change the behavior of the Full Screen App function in 10.7 - by default - with my 3 monitors attached - full screen effectly blanks two of the screens. Not quite as useful as it could be if for example I wanted to go full screen on my wing monitor with one app - while still working on other apps on the built-in or primary displays.

this is currently not possible. mutiple display support went out the window with Lion. please submit issue to
http://www.apple.com/feedback/macosx.html
the more of us do it, the more likely 10.7.1 will have a fix for this.
Shame on you Apple!

Videos take all the screen in Full Screen mode!!!!!

I mean, if you have a flash, and a video on it, which is smaller than the size of the flash, AND if the project is set to be in Full Screen, then, when you publish it and test the .exe, the video will TAKE all the screen area!
I have included some pictures so you can see what I mean.
This is how it SHOULD be in full scree, and how it IS if it's not in full screen:
And this is how it actually IS if I play it on Full Screen:
I know, this is really weird. Try it by your self. Create a flash, insert a video that doesn't take all the screen, add the Full Screen CODE, publish it and execute the .EXE file. The video will fill all the Screen.
HOW CAN I SOLVE IT??????????

videoplayer.fullscreenTakeover = false;

Slow graphics performance - login screen, launchpad, full screen video all stutter

Since installing Mavericks, I've found that several system animations are slow/stutter. This is on a 2012 MacBook Air with maxed out hardware specs so its not b/c I'm running an old system.
Some examples:
- When booting up, right before I reach the login screen, the display quickly flashes blue. This leads me to believe something funky is going on with my graphics card/drivers
- The login animation, where you click your username and it floats to the middle of the screen so you can type in your password, is very jerky, taking 2+ seconds to complete. Previously it had been fast and smooth
- When using Launchpad, expanding folders often takes several seconds. The folder will start to expand, freeze, and then finally finish. This tends to be more of a problem for folders with 1 row of icons. Large folders oddly seem to expand ok / smoothly
- Watching full screen video in iTunes causes the audio to stutter (the video playback is still smooth). If I make the window smaller, audio and video playback are smooth again
Is anyone else experiencing these kinds of graphics issues? Any idea whats going on or how to fix?

Quit Chrome and see whether there's any change. If not, see below.
Step 1
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, andIdle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Lenovo 24 inch touch screen not full screen with 1920x1080 selected (L2461xwA)

I have the L2461xwA Lenovo Widescreen Touchscreen display. When I set the resolution to 1680x1050, it is full screen as expected. When I set the resolution to 1920x1080, which is the native resolution, it is NOT full screen. There is about a 1 inch black border on the left and right sides and about a 3/4 inch border on the top and bottom when in 1920x1080 resolution. How do I make it full screen?
(I'm running Windows 7 64-bit and have installed all of the drivers. The touch functionality and camera are working great)
Thanks
Solved!
Go to Solution.

Nevermind. I resolved it. When I switched DVI ports on my video card, it worked.

Separated screens in full screen mode

Hi all,
I use Acrobat to edit and present a PDF slide show on a projector. Now, I've discovered the need to navigate among my slides while the current slide is in full screen mode on the projector. Just like in Powerpoint when you use your laptop monitor to select the images you want to show as thumbnails, while the projector shows the slides in full screen mode. Is there a way to make Acrobat do the same thing?

Anyone?

Can i have 2 screens go Full screen

I am trying to get my second screen to go full screen as well when running full screen apps. Can this be done?

No. Although, you can set one monitor to be the primary monitor (instead of the physical laptop) if your second monitor is larger than you first. You can do this by going to system preferences then arrangement and drag the little bar on the top of the first monitor to the other monitor.

E71 photo zoom, full screen & video full screen sh...

anyone know any short key for this? my old nokia 6630 can zoom photo with pressing key #5. full screen photo with key *key, video full screen with pressing key #2. does E71 have these short key?
Solved!
Go to Solution.

In E71 photo viewer you can zoom in with 5, zoom out with 0 and toggle fullscreen with #. 2, 4, 6 and 8 scroll the image when zoomed in.
However, you need to press the function key simultaneously in order to access the numbers, which makes these shortcuts a little less handy

Mountain Lion Dual screen window Full screen problem?

I could not upgrade from Snow Leopard to Lion on my iMac because dual screen operation was broken when a window on one screen was set to full screen. Has this been fixed in Mountain Lion?

CuckooPint wrote:
I could not upgrade from Snow Leopard to Lion on my iMac because dual screen operation was broken when a window on one screen was set to full screen. Has this been fixed in Mountain Lion?
Hey Cuckoo
i Use an iMac with 2 dual screens and the problem you are describing is fixed in the final build release of ML.
i have not seen the breaking of activity when switching too full screen on even all 3 monitors. so looking good in the multiscreen support.
cheers

Bizarre split screen in full screen mode

Hi,
I've having some weird display issue when in full screen mode. Please see attached picture.
Can anyone help.
Thx in advance.

Each of the images you want to have in the split screen need to be in separate video tracks. If you are doing a 2-part split screen, then each of the 2 clips you are using need to be on separate video tracks (say, v1 and v2).
Next, with Image + Wireframe turned on, you can move & resize the images in the canvas so they are placed where you want them on screen (you do this with one image at a time).
Piero's QuarterPIP filter makes this a lot easier. You may want to try it.

Hiding things outside screen in full screen

I've already finished my flash presentation and now I'm
trying to enlarge it to full screen. The problem is that when I do,
it shows some objects outside of the screen on the screen since my
presentation doesn't happen to fit my monitor. How can I make it so
that the presentation enlarges without cutoffs or extras and shows
a black background in the areas outside of the screen when in full
screen mode? Thanks for any help!

another way (since masking entire movie can cause a
performance hit) is to make a new layer above
all others - make a ery large rectangle and cut a hole the
same size and shape and position as the
stage. This will hide everything outside of stage and you
wont have the overhead of a mask to worry
about (masks use ram).
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
chrism59 wrote:
> Use a mask over the entire movie. Make the mask fit the
movie size, this wll make all items outsize the masked area not
visible even in full screen.

Want to show bookmarks by moving cursor to edge left screen, then full screen for viewing websites; no bookmarks, lost on reset.

Firefox was set up so when the cursor was moved to the extreme left of the screen, the bookmarks list was viewed and when the cursor was elsewhere on the screen the bookmarks list was hidden and one would see the whole screen. It was very handy ....this setup was lost when I did a reset of Firefox two days ago. Would like to get that back to the way it was, and haven't had any luck so far....hoping you can help me. I have Windows XP .
Thanks so much.
Stu

I think this probably was a feature of an add-on (specifically, an extension).
The "Old Firefox Data" folder that the Reset feature creates on your desktop would contain your old extensions. However, there isn't a convenient list with recognizable names; most will be named with a long unique ID code. It might be easier to run some searches on [https://addons.mozilla.org/en-US/firefox/ the Add-ons site] than to look up all of those codes...

Maximize Graph on Screen to full screen

Similar Messages

Maybe you are looking for