Maximum 3845 voice card capacity?
Hello,
I am trying to build a 3845 of the following spec.with the configurator tool.
in the NM slots:
2x EVM-HD-8FXS/DID each with 2x EM3-HDA-8FXS/DID
2x NM-HD-2V each with 2x VIC2-2BRI-NT/TE
in the HWIC slots:
1x VIC2-2BRI-NT/TE
1x HWIC-4ESW
I specify IOS upgrade to S384RSPSK9-12424T so that the EM3-HDA is supported.
But when I finally click check configuration, it says there are only 4 HWIC slots available in CISCO3800, it doesn't appear to take into account that 4 of them are going into the NM-HD-2V modules.
Is this a configurator bug?
Now someone has told me that the 3845 doesn't support 2x EVM-HD-8FXS/DID each with 2x EM3-HDA-8FXS/DID as well.
Is this true or not?
HELP!
Paul
I thought that the VG224/248 were non-preferred (going end-of-life) as the newer routers (28xx,38xx,29xx,39xx) have absorbed the functionality into their capability.
Customer wants to remain on analog handsets and TDM for voice, so VOIP is not an option.
Unfortunately, I have a requirement to interface to 8 ISDN BRI user devices, BRI is an essential component. I am using E1 for the PSTN trunking.
So, pushing the envelope or not, does anyone know if a 3845 can give me 48x analog voice ports, 8x BRI ports, 1x E1 port and 4x Ethernet switch ports? If so, what modules do I need to achieve this?
Similar Messages
-
What is the maximum micro SD card capacity that this 8320 will accept? The guy at radio schak said 4 Gig.
it all depends on your BB software version
options- about, 3rd line down... v4.x.x.x
tehn compare to this chart
http://www.blackberry.com/btsc/KB05461 -
Maximum number of cards saved on account?
You've currently saved the maximum number of cards allowed for your account. To pay with a new card, remove one of your saved cards from your stored payment details. when his father put a new card says I have too saved the maximum number of cards and I deleted all the cards in Stored payment details
Post transferred from blog article;
subject/title edited accordingly.SAME PROBLEM. I have no more saved cards yet I can't pay with a new one. So I have no more Skype number. Ahh, I can't help but be annoyed when Microsoft takes over things. Can someone provide a solution please? I need my Skype number and right now I can't receive calls at all.
-
Urgent,voice card problem
. hi all,
my friend have bought iphone 5s 32 gb from london for me. but my phone is problem either screen or voice card. How can ı use international guaranty?
best regards
my phone
Model: ME437B/A
Serian Number: DNPLK8XYFFGG
IMEI:35 876105 156176 4
ICC ID: 8990 0112 0714 0004 864
Taner BADEMIf you lost your memory card password, it is not possible to recover data on it.
But atleast you can save your memory card by using a trick.
Just insert your memory card into a smartphone like Nokia E66 which i have tried.
Now try to format, and it works without need of your forgotten password.
You know what
these Smartphone won't ask for password
Please click on Kudo button if my post helped to save your memory card.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.---------------------------- -
Router 2911 with voice card VIC3-E/M VOIP Problem
hi All
I want to ask if any of you have any experience like this. I have deployed a new Cisco router (model 2911) in my client. The previous router they used is 2811. After deployement, the WAN & LAN connection work fine, but the VOIP connection does not work.
The previous router (2811) uses a voice card module VIC2-e/m. But the new router (2911) use voice card module VIC3-e/m. It is used to connect to the PABX Panasonic TD-1232.
Could this be a factor?
Can anyone help?Hi,
In addition to what Terry has said, the only change is IOS 15.1 where Toll Fraud Prevention feature was introduced which says
The router will automatically add any destinations that are defined as an ipv4 target in a VoIP dial-peer to the trusted source list.You can run the command
show ip address trusted list
To overcome this behaviuor, you can follow the three ways as suggested in below link .The one has been already suggested by Terry.
https://supportforums.cisco.com/document/46566/understanding-toll-fraud-enhancements-1512t
your 28XX router has 12.4 IOS version
regds,
aman -
I have recently got a router - 1751v
and also a voice card - vip2-2fxs
The card is not getting initialized
error showing card not initializing, unknown hardware found in slot1.
is there any patch for the card to be initialized
pls replyHi Amit,
Thank you for ur response
here is the sh tech support details of the router
the card is vic-2fxs
------------------ show version ------------------
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 14-Apr-05 19:25 by yiyan
Image text-base: 0x80008120, data-base: 0x81190E44
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)
yourname uptime is 4 minutes
System returned to ROM by power-on
System image file is "flash:c1700-sv8y-mz.122-13.T16.bin"
cisco 1751 (MPC860P) processor (revision 0x400) with 83979K/14325K bytes of memory.
Processor board ID FOC08310YEZ (1669471188), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
------------------ show diag ------------------
Slot 0:
C1751 1FE VE DV Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 4.0
PCB Serial Number : FOC08310YEZ
Part Number : 73-7241-04
Board Revision : B0
Fab Version : 04
Product Number : Unknown
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 02 4D 41 04 00 C1 8B 46 4F 43 30 38 33
0x10: 31 30 59 45 5A 82 49 1C 49 04 42 42 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Packet Voice DSP Module Slot 0:
Hardware Revision : 3.2
Part Number : 73-6726-01
Board Revision : A0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : VIC09267FBE
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 02
Number of DSP's : 1
DSP memory size(in kwords): 256
Type of DSP : TMS320C549
Product Number : PVDM-256K-4=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 02 AC 41 03 02 82 49 1A 46 01 42 41 30
0x10: 80 00 00 00 00 02 03 C1 8B 56 49 43 30 39 32 36
0x20: 37 46 42 45 03 00 81 00 00 00 00 04 00 09 02 FF
Packet Voice DSP Module Slot 1:
Not populated
WIC/VIC Slot 0:
Serial 2T (12in1)
Hardware revision 1.0 Board revision D0
Serial number 0024047013 Part number 800-03181-01
FRU Part Number WIC-2T=
Test history 0x00 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 12 01 00 01 6E ED A5 50 0C 6D 01 00 00 00 00
0x30: 68 00 00 00 00 10 12 00 FF FF FF FF FF FF FF FF
can u pls help.... -
Differences betwin Cisco Voice Cards
Hi,
I have a Media Gateway that is certificated to work with Cisco 2650XM using NM-HDV-1E1-30E or NM-HDV-2E1-60 cards to make trunk TDM and cisco work as ARU (Automatic response Unit) using TCL 2.0.
Now, i have a cisco 2811 and seen VWIC-2MFT-E1 and VWIC-2MFT-G703 cards, that are more cheap than that the NM cards.
My question is if can I use this VWIC to replace that NM voice cards for applications of ARU (Automatic response Unit) using TCL 2.0.
Thanks.
FredThanks,for your answer.
How i now if my router alredy gave a dsp module ??
Have a cli commando to check ???
using show voice dsp i get:
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT
==== === == ======== ======= ===== ======= === == ========= == ===== ============
----------------------------FLEX VOICE CARD 0 ------------------------------
*DSP VOICE CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ======== ======= ===== ======= === == ========= == ==== ============
*DSP SIGNALING CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ======== ======= ===== ======= === == ========= == ==== ============
------------------------END OF FLEX VOICE CARD 0 ----------------------------
Thanks. -
Maximum size SDHC card for the Z
As subject, what is the maximum size card you can use in the Zen? i have the 6gb version.
Cheers
AlanAt the moment, I believe it is 6 gb.
-
Largest Media Card Capacity for BB Curve 8330
I have read the largest supported capacity for the BB curve 8330 is 8 GB but I was wondering if anyone had tried any larger capacities memory cards with any success or failure. I would love to put all my music on my phone, but 8 GB is not going to hold it all. I have A LOT of music. I would need at least 16 GB to get by with to be able to have room for all my music, pictures and videos. But before I run out and spend a bunch of money on a larger card I wanted to know if anyone else had tried it.
*~*Felix*~*
Solved!
Go to Solution.Hi,
Check the below for max media card suppot. Max media card support depends on the device OS not the device model.
BlackBerry Device Software version
Media card size limit
BlackBerry Device Software 4.2.0
Up to 2 GB
BlackBerry Device Software 4.2.1
Up to 4 GB
BlackBerry Device Software 4.2.2
Up to 4 GB
BlackBerry Device Software 4.3.0
Up to 8 GB
BlackBerry Device Software 4.5.0
Up to 8 GB
BlackBerry Device Software 4.5.0.81 and later
Up to 16 GB
BlackBerry Device Software 4.6.0 and later
Up to 32 GB
Check MicroSD media card sizes supported by BlackBerry Device Software versions
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Voice card not appaering in configuration?
we have inserted pvdm3 module in to the 2901 router
but its LED status is showing Amber continuolsly.
I would like configure the VIC3-2FXS/DID card but I am not able to see the card in running configuration but I could see the card in sh diag.
Can any ony help?
Its sh diag command giving the following output.
/#sh diag
Slot 0:
C2901 Mother board 2GE, integrated VPN and 4W Port adapter, 4 ports
Port adapter is analyzed
Port adapter insertion time 00:58:11 ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC16310CSA
Hardware Revision : 1.0
Part Number : 73-11834-09
Top Assy. Part Number : 800-30795-05
Board Revision : A0
Deviation Number : 0
Fab Version : 03
Product (FRU) Number : CISCO2901/K9
Version Identifier : V05
CLEI Code : CMMHB10ARA
Processor type : C1
Chassis Serial Number : FGL16312126
Chassis MAC Address : 6073.5c26.7440
MAC Address block size : 72
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 36 33 31 30 43 53 41 40
0x10: 06 17 41 01 00 82 49 2E 3A 09 C0 46 03 20 00 78
0x20: 4B 05 42 41 30 88 00 00 00 00 02 03 CB 8C 43 49
0x30: 53 43 4F 32 39 30 31 2F 4B 39 89 56 30 35 20 D9
0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 48 42 31 30 41 52
0x50: 41 09 C1 C2 8B 46 47 4C 31 36 33 31 32 31 32 36
0x60: C3 06 60 73 5C 26 74 40 43 00 48 C4 08 00 00 00
0x70: 00 00 00 00 00 F3 00 65 40 01 25 41 00 87 42 00
0x80: 00 F8 00 28 03 E8 1C 89 07 D0 20 21 0B B8 20 93
0x90: 0F A0 21 2F 13 88 21 83 17 70 21 A8 1B 58 21 B0
0xA0: 1F 40 21 AB 23 28 21 79 27 10 21 78 41 01 1D 42
0xB0: 00 00 F8 00 28 03 E8 1C 20 07 D0 1F 40 0B B8 20
0xC0: 6C 0F A0 21 34 13 88 21 34 17 70 21 98 1B 58 21
0xD0: 98 1F 40 21 98 23 28 21 34 27 10 21 34 FF FF FF
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
PVDM Slot 1:
16-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card
Hardware Revision : 1.0
Part Number : 73-11576-03
Board Revision : C0
Deviation Number : 0
Fab Version : 03
PCB Serial Number : FOC162257KD
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM3-16
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 05 D8 41 01 00 82 49 2D 38 03 42 43 30
0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 36 32 32
0x20: 35 37 4B 44 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 8F 50 56 44 4D 33 2D 31 36 20 20 20 20 20 20 20
0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0:
3rd generation - FXS DID Voice daughter card (2 port)
Hardware Revision : 1.0
Top Assy. Part Number : 800-30501-02
Board Revision : A0
Deviation Number : 0
Fab Version : 07
PCB Serial Number : FOC1350420M
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : VIC3-2FXS/DID
Version Identifier : V02
CLEI Code : IP9IAB3CAB
Longitudinal Calibration : 01 10 10 4F 8D 10 10 8F
9F
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 06 21 41 01 00 C0 46 03 20 00 77 25 02
0x10: 42 41 30 88 00 00 00 00 02 07 C1 8B 46 4F 43 31
0x20: 33 35 30 34 32 30 4D 03 00 81 00 00 00 00 04 00
0x30: CB 8D 56 49 43 33 2D 32 46 58 53 2F 44 49 44 89
0x40: 56 30 32 20 D9 02 40 C1 C6 8A 49 50 39 49 41 42
0x50: 33 43 41 42 D3 09 01 10 10 4F 8D 10 10 8F 9F FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Embedded Service Engine 0/0 :
Total platform memory : 524288K bytes
Total 2nd core memory : 0K bytes
Start of physical address for 2nd core : 0x80000000
Virtual address start of 2nd core memory : 0x0 - 0x0
2nd core configured disabled
L2 cache ways for 2nd core : 0
Its sh running-conf command giving the following output.
/#sh running-config
Building configuration...
Current configuration : 1228 bytes
! Last configuration change at 06:29:29 UTC Fri Feb 7 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname /
boot-start-marker
boot-end-marker
enable secret 4 tnhtc92DXBhelxjYk8LWJrPV36S2i4ntXrpb4RFmfqY
no aaa new-model
no ipv6 cef
ip source-route
ip cef
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO2901/K9 sn FGL16312126
hw-module pvdm 0/1
username cisco
interface Embedded-Service-Engine0/0
no ip address
no ip route-cache
shutdown
interface GigabitEthernet0/0
ip address 172.169.2.152 255.255.255.0
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
control-plane
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password cisco
login
transport input all
line vty 5 15
password cisco
login
transport input all
scheduler allocate 20000 1000
end
and sh flash giving me the following output.
/#sh flash
-#- --length-- -----date/time------ path
1 74503236 Jul 30 2012 20:08:54 +00:00 c2900-universalk9-mz.SPA.151-4.M4.bin
2 2903 Jul 30 2012 20:21:54 +00:00 cpconfig-29xx.cfg
3 3000320 Jul 30 2012 20:22:10 +00:00 cpexpress.tar
4 1038 Jul 30 2012 20:22:18 +00:00 home.shtml
5 122880 Jul 30 2012 20:22:26 +00:00 home.tar
6 1697952 Jul 30 2012 20:22:40 +00:00 securedesktop-ios-3.1.1.45-k9.pkg
7 415956 Jul 30 2012 20:22:54 +00:00 sslclient-win-1.1.4.176.pkgThank you Gergely Szabo,
Sh Inv output and sh version output is as follows.
/#sh inv
NAME: "CISCO2901/K9 chassis", DESCR: "CISCO2901/K9 chassis"
PID: CISCO2901/K9 , VID: V05 , SN: FGL16312126
NAME: "3rd generation two port FXS DID voice interface daughtercard on Slot 0 SubSlot 0", DESCR: "3rd generation two port FXS DID voice interface daughterca"
PID: VIC3-2FXS/DID , VID: V02 , SN: FOC1350420M
NAME: "PVDM3 DSP DIMM with 16 Channels on Slot 0 SubSlot 5", DESCR: "PVDM3 DSP DIMM with 16 Channels"
PID: PVDM3-16 , VID: V01 , SN: FOC162257KD
NAME: "C1941/C2901 AC Power Supply", DESCR: "C1941/C2901 AC Power Supply"
PID: PWR-1941-2901-AC , VID: , SN:
/#show version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
/ uptime is 3 hours, 22 minutes
System returned to ROM by power-on
System restarted at 08:40:55 UTC Mon Feb 10 2014
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FGL16312126
2 Gigabit Ethernet interfaces
1 terminal line
2 Voice FXS interfaces
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device# PID SN
*0 CISCO2901/K9 FGL16312126
Technology Package License Information for Module:'c2900'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc None None None
data None None None
Configuration register is 0x2012 -
Creative ZEN 4GB max. SD-Card capac
Hi
does the ZEN support SD-Cards with more than 4GB capacity ?Here is a list of SD / SDHC that do work in the ZEN. This have been tested by owners of ZEN's from around the world
A-Data 6GB Class 6 SDHC
A-Data 6gb SDHC
A-Data 2gb g02gnm26c0059. Part #SD2G50X
Apacer Gb 60x
Core Micro SD cheapo 2GB
Crucial Standard miniSD? (CTGBMSD) GB
Dane Elec 4GB
Dane-Elect SD card 8Gb
GoodRam 4GB
I-O Data microSD? (SDMC-2G/A) 2GB
I-O Data microSD? SD (SD-256M) 256MB
Impact 2Gb
Integral 8Gb SDHC Class 4
KingMax 4GB High-Speed Class 6 SDHC
Kingston 6 GB
Kingston 4 GB mini SDHC Class4
Kingston 4GB
Kingston 8GB SDHC Class 6 card
Kingston miniSD (SDM/GBFE) GB [color="#000000"]
Kingston SD High Capacity (SDHC), Class 2 (SD2/8GBFE) 8GB
Kingston SDHC class 4 card, 8 GB
Lexar (el-cheapo) 4GB SDHC (Speed Rating 2)
Lexar 28 MB SD card,
Lexar Gb & 2Gb,
Lexar SDHC, Class 2 (SDHC8GB) 8GB
Panasonic SD, Class 4 (RP-SDM02G) 2GB
Patriot 8 GB
Patriot Memory 6GB sdhc
PenDri've SD, 50X 2GB
PNY 32GB SDHC Model: P-SDHC32G4-Fs
PQi 8gb SDHC
San Disk Ultra? II SDHC High Performance Card, Class 4 4GB
San Disk Extreme? III SD 2GB
San Disk microSDHC? (SDSDQR-892-AM) 8GB
San Disk sdhc, 4gb
San Disk Ultra? II SDHC High Performance Card (SDSDRH-06G-A) 6GB
Sandisk GB SD card.
Sandisk GB Class 2 SD
Sandisk 2GB Class 2 SD
Sandisk 2Gb,
SanDisk microSD (SDSDQ-024-P60M) GB
SanDisk miniSD (SDSDM-024-P60M) GB
Sandisk Ultra II 4gb
Toshiba microSD (SD-C0GR4W) GB
Toshiba SDHC, Class 4 (SD-HC08GR3W) 8GB
Toshiba SDHC, Class 5 8GB
Toshiba Ultra High Speed SD, Class 6 (SD-F0GR3W) GB
Transcend GB SD card, and the
Transcend 4GB 50X SD 4GB TS4GSD50
[color="#000000"]Transcend 8GB Class 2 SDHC
Transcend 8GB SDHC CARD (SD 2.0 SPD Class 6)
Transcend microSD (TSGUSD) 8GB
Transcend SDHC, 50X Ultra-X SD 4GB
Transcend SDHC, Class 6 (TS8GSDHC6) 8GB
Transcend TS4GSDHC6 4GB SDHC card (SD 2.0 SPD Class 6)
Transcend TwinMos miniSD, Class 5 (SDSDM-024) GB -
What SIM card capacity does the new iPad require (64K or 128K)?
I brought a new iPad (4G+wifi) to my parents to replace their old laptop, I am trying to get them a micro-sim. Since they are not in Australia, I am not quite sure which capacity of sim card does the new iPad require (my one working pretty good with Optus). 64K is the most comment one in their country, therefore I am not sure which one should I purchase. If would be really greatful if anyone has an answer for that! Thanks in advance
The iPad comes with 16, 32, or 64 GB of storage. Perhaps that is what you are referring to. The sim card has no storage so amount of "K" is meaningless. Sim cards have the single purpose of connecting to your provider's network.
Perhaps you are referring to phone sim cards that can store contact numbers. I think these have 64K or 128K storage capacity on the sim card. -
Hi
Could you kindly assist with the following?
Do the Cisco VWIC-1MFT-E1, VWIC-2MFT-E1 cards support half duplex communications? We have VHF radios at our remote sites which our guys can access through a Vanguard router. Each timeslot carries a specific frequency(radio) and the E1 card is configured as half duplex to eliminate any feedback.Hi. Thanks for the reply!!
Let me explain properly what I meant about half duplex comms. At present we have 6 digital radios(frequencies) at our remote site which is connected to our main site through IP Link (IP VPN MPLS). These remote radios need to be communicated with our voice switch at main site. The communication interface for both radios and voice switch is E1 ie we want to have communication between voice switch and remote radios through routers having E1 cards. All radios are connected to a E1 card on our Vanguard router and routed through MPLS cloud to our main office where we take it from an E1 card to our voice switch. Each of the 6 frequencies is assigned a timeslot on the E1 and the idle state is set to 0101. When one of the air traffic controllers keys the remote radio(PTT) the TX code 1010 is sent to the remote side and the radio gives the squelch code of 0011 back which means the radio has opened the path for transmission from voice switch to antenna and the controller can speak to the pilot. At this time, ideally the receive path from pilot should be closed ,ie. half duplex, but the E1 card was , by default, set to full duplex and this caused feedback as the rx path was still open when the controller was sending a transmission. Vanguard then changed their software to half duplex so that when a controller PTT's the remote radio only the transmit path is open and on the other side, when pilot keys the mike, only rx path become open and not tx path. This cleared the feedback problem we had.
For reasons I don't want to get in to I'd rather use Cisco but I would like to know if the above mentioned is possible before purchasing E1 cards only to find out we're stuck with the feedback problem.
Cheers!! -
Maximum cos1 (voice traffic) supported by Cisco ASR 1006 router
Dear Team,
Please confirm the maximum cos 1 traffic supported by cisco ASR 1006 router.Yes, it would. If you are planning on terminating a single site on this router I would spread over multiple routers for redundancy.
Table 6 explains number of ports and channels providing you have the DSPs:
http://www.cisco.com/c/dam/en/us/products/collateral/routers/2800-series-integrated-services-routers-isr/product_data_sheet0900aecd8057f2e0.pdf -
ISL and card capacity question.
Greetings,
When using ISL's on 16 port 2 Gb cards, you can use one port for an ISL but when using 32 port cards, you must use only one port in the port group (four ports). So the other three ports are useless (turned off).
With the new 4 Gb cards, port groups are no longer composed of four ports. The DS-X9124 is composed of six ports and the DS-X9148 is composed of twelve ports in a port group.
So, what exactly does that mean? Will an ISL require 5 ports and 11 ports to be wasted in the 24 and 48 port 4 Gb cards respectively? If so, thats a huge waste of ports.
The reason I ask is that my edge 9216's will have the 16 port 2 Gb ports (the second card will be a DS-X9148) for Port Channel ISL's to my 9509 core.
Our project manager has gotten carried away with the new 4 Gb ports but has not done much research. So if I had a 8 port Port Channel ISL from the 9216, can I use a 24 port 4 Gb card in the 9509 or do I need another 16 port 2 Gb card?
The Cisco doco on the 4 Gb cards sort of suggests that the 24 port 4 Gb card can be used for ISL's but it does not state if port groups have restrictions like the 32 port 2 Gb cards.
Clear as mud isn't it? Any help would be appreciated.
StephenNo restrictions like on the 32-port card.
With the new 24 and 48 port cards you have 12.8 Gbps of bandwidth available per port group and you can dedicate bandwidth per port from that. ISLs require dedicated bandwidth. As long as you do not overbook the port group by dedicating more bandwidth than available you're fine and do not need to put any ports out of service.
E.g. on a 24 port card you have 4 port groups of 6 ports each. You could dedicate 2 ports @ 4G in the port group for two ISLs and have the other four ports in the group share the rest of 4 Gbps (running 4:1 oversubscribed). Or you could just use one ISL per port group and have five ports share the rest of 8.8 Gbps.
All that is described in detail here:
http://cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080664c6b.html
Ralf
Maybe you are looking for
-
I pull up google. Type in a search query. The results pull up. I choose a website link and instead of going to the website, a notification window pops up asking me to confirm a download of a .jsf file or a .txt file. I will post an example below: "Yo
-
TS1369 why does I tunes crash in windows 8 when I connect my ipod classic?
severe problems setting up and syncing ipod classic on new pc with windows 8
-
I have a MacBook air from 2009. Today I erased the HD to reset the computer to his factory settings using the command I'm trying to reinstall Lion on it. ""It says that this item is unavailable at the moment!!!! I tried with his apple ID, with my App
-
List of new/updated/fixed features in 1.1.2?
Hi all, Is there a website that list all the updates specifics of the 1.1.2 release? I mean what should I be expecting? Thanks,
-
Trouble with 10.3.9: possiblly network or permissions problems?
Hello, I'm running OS X 10.3.9 on my iBook G3 (old but still works ) Lately I've had a problem with my entire interface that may be related to file paths, network problems or permissions problems. Whenever I try to open anything on my desktop (includ