Maximum Amount display in report

Dear Friends,
I hav eone report, and which is build on Multiprovider. Cube1 will give Qty and Cube2 will give Prive, so finally there is a formula called Price * Qty = Total.
                 CalDay     9/10/2008
Plant         Material    Total
DA01     MD2112     254,282.0000000
     ME2122     110,731.5000000
     MG2114     71,582.1000000
     MJ2112     53,492.4500000
     MM2111     357,903.0000000
In above result I want to disply only
                CalDay     9/10/2008
Plant         Material    Total
DA01     MM2111     357,903.0000000
Note: My report always displays calday in columns. i.e. day wise rollup.So if I execute that report for one month, it will disply the report for all 30 days with Plant and Material contains Maximum value only.
Thanks
Ganga

Are you using version 3.5?
Have you tried Exception Aggregation? Maximum value is one of the options.
Patrick

Similar Messages

  • Maximum line display in reports ex : Normal or ALV.

    Hi ,
          I like to know maximum lines display in reports normal classsical or ALV report .Can any one let me know .
    regards,
    veera

    Hey Veera,
    This is Ravi this side.
    In SAP there is concept of pages.
    There is no maximum no. of lines for the entire o/p as the o/p itself is divided into pages.
    However each page has its own size.
    The maximum for a page is 60,000
    Ravi

  • Powermac G5 Quad- Maximum Amount of Display cards?

    Is there a maximum amount of display cards I can have?
    What card does one recommend i add as a second card (i guess there is less bandwidth for the second card) i need something else with two DVI outputs..
    I want to have my two displays for regular computing and then another video card that goes to my HDTV so i can sort of have a media center setup.. anyone done anything like this? Is there any "media center" software or display management software to make something like this work cool? something like.. an iTV with my existing powermac, if you know what i mean.

    It is possible to run four PCI-e graphics cards so long as none are double slot cards. You would be limited to the usual suspect cards nV 6600LE, nV 6600, ATI X1900, nV quadro 4500. each card can drive one or two monitors.
    Elgato EyeHome or EyeTv would give you many AppleTV like capabilities and Front Row-ish interface

  • Maximum amount of messages allowed

    Please advise what is the maximum amount of messages allowed during the Automatic Message Propagation in Intranet applications.

    Are you sure this is a report, and not an extract? If it's an extract there are better tools to use for the job. (SSIS perhaps?)
    If you must run it through SSRS, you'll need to shrink your columns widths down to 454.5 / Number of Columns.
    It might be worth considering displaying the data the other way, too.

  • Maximum amount of RAM on Y570 and Z570

    What is the maximum amount of RAM that the Y570 and the Z570 can support? Is it 8GB or 16GB?

     
    velenoso666,
    I think you are all right - this is peer to peer support, and customers / non-employees who participate here do provide the vast majority of the answers.  I think that is actually a really good thing, and it makes sense if you think about all the different possible scenarios - combinations of various software, OS versions, 3rd party option accessories, and environments being used.   
    Indeed, I think Lenovo does learn from our customers in many ways, and I think that is a good thing too.  I continue to be impressed by the kinds of people here - many who are engineers or professionals with advanced degrees,  some like AndyP who work on our systems on a daily basis (and have for years) based on their "day jobs" , and some who may just be brilliant on their own account.   
    In terms of providing "official answers" when it comes to specs, we have to answer based on reference doccuments - PSREF sheets, content on support or marketing site (except when a mistake is noted there).
    When it comes to memory or HDD compatibility - the official answers are what is published, and those come from a combination of the test plan and the products that we sell at the time the spec was published.   For example, if we didn't sell an 8 GB module, it may well work, but we may not have tested.   We have to provide an answer for what we are prepared to support through engineering.
    In many cases, the community may report that things actually do work in configurations beyond which Lenovo offiicially supports, and I think that's a good thing too.  Another value for having our customers pool their knowledge and experience here.
    Thanks for your feedback and suggestions / knowlege you share with others here.
     

  • Budget is not getting displayed in Report S_ALR_87013558

    Hi Friends,
    For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
    Is there any setting in customising in information systems to display in the report.
    Please treat this as quite urgent.
    Regards,
    Manohar N

    Hi Sridhar,
    Thanks for the input.
    But still Budget is not appearing in the report, even after running CJBN & CJEN.
    I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
    Regards,
    Selva

  • Complete data not displayed in Report

    Hi forum,
    I have a cube based on data source 0FI_AR_4,which is updated via an ODS.I have created a query for ageging analysis.The query uses Referrence number ( invoice number) to display the receivables of various customers and number of days from due date.
    To my surprise many invoice numbers are not being displayed in the query, but when i restrict the query to the invoice numbers which are not being displayed the report generated is able to display all the doccuments.
    I have checked the data in the cube and all the invoice numbers are flowing well fro R/3.
    My only way of saying thanks to the people who solve the issue or provide helpful answers is by assigining points.
    Regds
    Suhel

    hello
    This is simple problem
    The result the query fetches is not able to display in the number of cells provided in the excel sheet
    So when you restrict the data, the query is able to show all the data fetched by accomadating in the columns available in the excel.
    Here in your case , there are not enough columns in the excel sheet to display all data
    Regards
    N Ganesh

  • Text data is not displaying at Report level for an Infoobject Item name

    Hi All,
    Texts data is maintained at Info object level but text information is not displaying at Report level for an object.  I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information.  This problem occured in QA(Quality) system but not replicated in Production system.  I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
    Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend.  In production it is displaying textal data for the IO.
    Thanks in advance.

    Hi All,
    Thanks for your valuable information.  I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
    In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
    As per my understanding might be the issue with Patches will be checking with Basis team on the same.
    Please suggest if you have any alternatives to fix the issue.

  • I need to display a Report which contain -- del QTY  and  INV QTY   in one

    Hi ALL,
    I need to display a Report which contain
    <b>Customer  , Material , Order No, Delivery No, Billing No , Order Qty , Dev Qty, Bill Qty , Invoiced Qty  and There Values  in One Line  .</b>
    How can I Display, When I am executing the report against the Delivery Number Bill Qty and Invoiced Qty is showing Hash ( # ).
    Do I need to right any Routines for this, if I am correct,  where I have to write that code and what is the code ,
    What are the Consolidation  routines ?????
    I am working on BI 7.
    Regards ,
    Shaik
    Message was edited by:
            shaik

    Frst check in backend, which all cubes have got data for each of three..
    Corresponding you can go ahead with Multi/Infoset..
    Look for reference no in all three cubes and pick one order and track tht by reference no in all cubes,
    Hope it helps..
    Thanks for points assigned

  • Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

    Would someone tell what I missed, I have set up the following:
    1) a report using report builder on NT
    2) my database is in Unix
    3) my report server is started in NT
    4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
    Error: The requested URL was not found, or cannot be served at this time.
    Oracle Reports Server CGI - Report Job has terminated with error.
    Reports Server Replies:
    REP-3002: Error initializing printer. Please make sure a printer is installed.
    Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
    null

    It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
    http://hostname:port/cgi-bin/rwcgi60exe?
    If you get a help screen, then you should be able to bring up your report.
    Regards,
    Xiaoling

  • Field symbol has not yet been defined-ALV Grid Display in Report

    Hi all,
              Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

    Hi,
    <li> This is problem with fieldcatalog.
    <li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
    <li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
    Thanks
    Venkat.O

  • Can not display BI report in Web ui

    I created reporting profile with both bi and interactive reporting active and assigned to the business role functional profile
    I gave the BI connection client in the report that I wanted. When I select the report in webu ui, it's taking me to a sign on pad. I assume this for BI sign on pad and When i enter sign on, it's not taking me any where.
    This just a standard report in CRM My top 5 quotations. All necessary steps in basic bi connection, basic sales analytics are done too
    How does the the connection between BI and crm works?
    Please advise

    Hi Experts,
    We are using Webiu 2007 with BI 7. 
    We linked our sandbox to RWT system to test the report output. In my CRS, I have source system RWT defined and the same way in BI also we have assigned CRS to link these systems together. It is my understanding that when we select the report, we are just calling the from BI into CRM.  I have done the following steps in CRM
    1) Created reporting profile in CRM analytics as both BI and CRM interactive reporting activated
    2) Assigned this reporting profile to business role
    3) I selected My-Top-5 quotation report and gave the BI system in display  bi reports
    4) I can see the report on webui.
    Problem: When I selected the report,  a logon pad appears and I enter RWT user id and password, it's doing nothing.  But, I have another user who is logging in for the first time got an error "Error loading template "OTPLB_OCRM_QUTO_Q0001_1 notification number BRAIN276". When the same new user tried to login second or third time, it's not showing the error and nothing is happening when we enter userid and pass word.  But, we can logon to GUI RWT.
    We tried to pull a query view report and web template reports see if we can display data. The BI team gave me couple of info objects keys. 
    1) I created the report with object key and type as one for 3.x template and one for 3.x query view
    2) Created logical links for these two reports and selected these two reports in business role. Now the reports are showing in webui
    3) When I select any of these, it taking to a blank screen without any logon screen. 
    BW team says that these reports are running with data in their system.
    Can someone please help?

  • Display of report in excel format.

    Hi,
      How to display a report in excel format?? I have the display details in an internal table.
        Is it possible for the output to come in excel format as soon as we  run the pgm other.than downloading from list or grid format..If so how to do it??Kindly help..
    Thanks..

    Hi,
    Once you have all the data in the internal table, just use function module 'Download' or 'WS_Download' and pass the parameters in function module like the below for example.
    if not i_list[] is initial.                          " i_list is an internal table  
    call function 'WS_DOWNLOAD'                          
          exporting                                       
               filename            = filename1            
               filetype            = 'DAT'                
          tables                                          
               data_tab            = i_list               
               fieldnames          = i_header     "i _header has the field names
          exceptions                                      
               file_open_error     = 1                    
               file_write_error    = 2                    
               invalid_filesize    = 3                    
               invalid_table_width = 4                    
               invalid_type        = 5                    
               no_batch            = 6                    
               unknown_error       = 7                    
               others              = 8.                   
    endif.
    Now, the excel will be created which has all the data.
    Hope this helps.
    Thanks,
    Srinivasa

  • Display Oracle Report on new window

    Hi,
    How can I display Oracle report from HTML DB on a new browser window? I have branch to this report. Thanks much for your help.
    Lakshmi

    Search this forum for "new window". You should find it. Try:
    checkbox and report page in new window

  • Display @ interactive Report

    Hello All,
    In my interactive Report, there is couple column in the “Do Not Display Column”.
    I would like to display them as other default column.
    Anyone can lead me about this issue ?
    EB NY

    Hi,
    Login to the application, and run the report as developer account. After running the page, click on interactive report Action menu --> select columns. Select the columns which you want to display in report and move them to Display in Report list box, arrange the order of the columns as per your requirement. Now Click on Apply. Now you should be able to see the new columns on the report page.
    To make this report setting available for all the users, you have to save this layout as default report setting. To do that, click on Action menu -> Save report . Select default report setting and then click on apply. This will save the current report as default report for all the users and they can see the newly added columns.
    Hope this helps.
    Regards,
    Manish

Maybe you are looking for