Maximum amount of video?

When I put about 100 videos in my itunes library the program stops working. I have to delete the videos otherwise I cannot use itunes anymore (it will crash everytime when i try to start it). Does itunes have a maximum amount of data or videos it can handle? Maybe someone has some information about this.
thanx Ivo from holland!!

Such a length of video will need a data rate of approximately 2MBPS if you intend to use MPEG2 at full D1 resolution. You could use MPEG1 and fit the content on the disc very easily, although visually it won't be as rich as MPEG2 at a higher rate.
Your other option is to use an encoder that can work at half D1 - which means you can use a higher data rate (if that's what you want to do) and still fit the footage onto a DVD-R.
If you are only using Compressor, have a go at using MPEG1 if you are sure that you only want to use 1 disc. Depending on the source material, you might be pleasantly surprised at the possible quality you can achieve with it.

Similar Messages

What's the maximum amount of video able to fit on a DVD?

I have roughly 4.5hrs of video. Is it possible to fit this onto one DVD using Compressor & DVDSP? Or am I going to have to do it on 2 DVD's? Is it possible to compress it enough to make it fit?
Please help.
Thanks

Such a length of video will need a data rate of approximately 2MBPS if you intend to use MPEG2 at full D1 resolution. You could use MPEG1 and fit the content on the disc very easily, although visually it won't be as rich as MPEG2 at a higher rate.
Your other option is to use an encoder that can work at half D1 - which means you can use a higher data rate (if that's what you want to do) and still fit the footage onto a DVD-R.
If you are only using Compressor, have a go at using MPEG1 if you are sure that you only want to use 1 disc. Depending on the source material, you might be pleasantly surprised at the possible quality you can achieve with it.

How do I identify the maximum length of video in iMovie which can be made into a dvd in iDVD, please?

How do I identify the maximum length of video in iMovie which can be made into a dvd in iDVD, please?
I made a sellection of video clips > pressed on "share" > on iDVD > after one hour of formating the message was under "project duration" : "Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window."
I have edited out some of the clips and waited anothe hour or so bu the same message appeared !
I want to know in advance how long can be the video clip sellection for the quality of video chosen ( the best before HD).
please help if ou can.
thank you very much indeed.
Michael
North London

It's trying to tell you to change the encoding setting:
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

Slow iMovie - Does it has limitation in the amount of video files it can edit?

Dear All,
I would like to do some videoediting of holidays video with my iMac i7 12gb ram.
I have imported with iMovie my dv video and this worked fine. But starting from a certain point iMovie became really slow. Thinking of a memory issue, I added 8gb ram (now 12) but the problem persisted. So I decided to move video files from mac hdd to my gbit lan NAS, and than I got a firewire800 hdd.
I got a MyBook Studio II (http://wdc.com/en/products/products.aspx?id=210) which I tried using first RAID1 and than to increase speed I configured into RAID0.
Now, what I noticed is that if the project has a total of:
- 29gb of video files, editing the project (move, delete, add) and play works quite fine. (project file size about:17mb)
- 53gb of video files, editing is slow (about 7sec to move or delete a clip) (project file size about:128mb)
This happens both if the video and pj files are on the iMac hdd or in the firewire one.
Does anyone of you know if iMovie has some limitations in the amount of video files it can edit, or if it is not performing correctly under certains conditions?
Furthermore I will start editing 1080/50p video since I got a new camera. Keep going with iMovie is the right way? Do you suggest other products?
Thank you for your advices,
blp

It appears you have enough processor speed, memory, and hard drives.
Once these are taken care of, there are two main things that cause slowness
1) Events should be logical events. You should not dump all your footage into a single event. A project can use clips from multiple events and the performance is fine. In DV for example, an event should hold maybe two tapes maximum. If a single tape has three logical events: say Birthiday, Vacation, and Christmas, make three events.
2) if you editing feature length movies, you should use Final Cut Pro X. For short movies iMovie is fine. For movies in the middle, it is more of a judgment call. The reason is that iMovie renders everything in one pass. Final cut Pro does background rendering as you go. If this were the case for you, you would be able to edit at full speed, and you would only notice the slowness or a crash when you shared the movie.

Powermac G5 Quad- Maximum Amount of Display cards?

Is there a maximum amount of display cards I can have?
What card does one recommend i add as a second card (i guess there is less bandwidth for the second card) i need something else with two DVI outputs..
I want to have my two displays for regular computing and then another video card that goes to my HDTV so i can sort of have a media center setup.. anyone done anything like this? Is there any "media center" software or display management software to make something like this work cool? something like.. an iTV with my existing powermac, if you know what i mean.

It is possible to run four PCI-e graphics cards so long as none are double slot cards. You would be limited to the usual suspect cards nV 6600LE, nV 6600, ATI X1900, nV quadro 4500. each card can drive one or two monitors.
Elgato EyeHome or EyeTv would give you many AppleTV like capabilities and Front Row-ish interface

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.

If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

I just bought a docking station for my iPad so I could plug into a mixing board and record a live show. I was disappointed at the time limitation for the recordings. What is the maximum amount you can record a song into GB for the iPad?

I purchased a docking station for my iPad so that I could record a live recording of my band directly from a mixing board this weekend using GarageBand. Unfortunately, I was unaware of the song length limitations of the iPad version of this program. Basically, was unable to capture more than 15 minutes of the gig. I've read other conversations on this forum and can't really determine the maximum amount of time this application can record. Can anyone tell me how long GarageBand for ipad can record at one single time and how to adjust the settings to achieve this? Also, is anyone aware of any other apps than could be used to record a longer please share. Thanks.
CP

I received an email reply from George, the Founder and CEO of Studiomini, he indicated to me that their app does not have any time limitations in regards to recording like GB does, you are only limited by the amount of free space on your iPad. Fo what it's worth, I think the Alesis IO Dock is an amazing piece of equipment. I would highly recommend purchasing the IO Dock and plugging your mixing board into the dock to capture your rehearsal. Hopefully the feedback I received from Studiomini is accurate and I can capture my entire rehearsal at one time. I hope this feedback helps. One last note, apparently their will be a update soon to view Studiomni in the landscape view on the iPad instead of just the portrait view.

F110/ FBZP - maximum amount paid per Vendor in Payment run

Hi
How do i create payment run where i want to restrict the maximum paid to a vendor per transaction.
If amount exceeds this, i still wish to pay, but to split over more than one payment order
Our BACS payments are now being processed via FASTER PAYMENTS, and there seems to be a limit of £100,000 per transaction per vendor - anything over is being rejected by danske bank
So far example above, if vendor is due 156,000 - i wish to make this payment still to them, but over 2 or 2 payment orders, none of them to be more than 100,000
I have tried several methods via FBZP by using the maximum amount, but none of my settings seem to work so far,
Please advise
Many thanks for your help
Tony

Hi Tony,
Not exactly the solution, but going forward you can try split the invoices and process it separately at the time of invoicing itself. Otherwise you can try the option installment payment terms, but there may be at least one day difference in payment.
Warm regards,
Murukan Arunachalam

Maximum amount of items in an edb database

I try to find out if there´s a limitation concerning the maximum amount of items (messages,appointments ...) in an edb database.
I´m currently on Exchange Enterprise 2010 SP3 with 3 databases in a DAG. One of this databases contains more than 5000000 items.
Does anyone know when its going to be critical?
Thanks for your help.

Thank you for your reply. This website seems to have its scope on limitations to user mailboxes but it led me to this Technet article and this was helpful.
http://technet.microsoft.com/en-us/library/cc535025.aspx
"When you consider the appropriate maximum item count for your organization, understand that there is no cliff at the maximum value, but instead a progressive degradation in performance. The stated limits are not hard-coded. They are numbers based
on testing and code analysis. As the item count increases, performance may degrade to a user perceivable level. The level of performance that is acceptable for users in your environment will dictate the appropriate maximum item count for the environment."
I think that is what I´ve been searching for. In fact there´s no limitation for objects in a database. There are limits for objects in critical folders that must be considered to keep up performance for Exchange.
Cheers

How can I copy the maximum amount of music to my ipod classic 160gb

how can I copy the maximum amount of music to an ipod classic 160gb

See also Repair iTunes Security Permissions and apply the suggested steps to the iTunes folder and the source media folder.
I may be reading too much into things, but is your media stored in a bunch of folders where each folder represents a playlist? If so my script ImportFolderStructure might be useful to you...
tt2

Maximum Amount for a Payment

Dear Expert,
i have set a limit 1,500,000.00 u20AC within the tcode FBZP so in case of the outgoing supplier payment and the paid amount > on what I have defined I got an exception , I think that it is logic.
My question what are the possibilities that we have on this functionality?
Thanks a lot

It is just used as maximum amount limit for a payment method.
For example: for India, the RTGS transactions are only for amount above 100000, so you can define here the minumum amount as 100000 for the payment using RTGS.
Exactly what is your business scenario, which you want to solve.
Regards,
SDNer

An global maximum amount limit for single payments made via the ACH

Hi
Can any one guide how to config the gobal maximum amount limit for a single payments made via the ACH (Automated Clearing House) network.
Pl do the needful.
thank you.

Hi Tony,
Not exactly the solution, but going forward you can try split the invoices and process it separately at the time of invoicing itself. Otherwise you can try the option installment payment terms, but there may be at least one day difference in payment.
Warm regards,
Murukan Arunachalam

Setting maximum amount to print cheque using transaction F-58

Dear SAP Colleagues
We have a requiement to set the maximum amount of $25M cheque to post and print when using transaction F-58. We have set all our payment terms to have this maximum amount. However the user can still use the transaction F-58 with mount exceng $25M.
Please advise if there is a setting in SAP where we can define the maximum amount for cheque to post and print using transacton F-58.
Regards

Try creating a validation in AP for that transaction code and the amount. I am not sure, but you can test. I don't think there is any place in SAP where you can restrict the amount for a transaction.
Hope this helps.
Shail

Credit receipt exceeds Maximum amount allowed

Hello,
We were recently requested to update one of our expense type's "Default/Max. value", also we were requested to have the "Amount type" set to "Error message for exceeding maximum". We have now come across a problem where credit receipts that are uploaded to our system are above the maximum amount allowed and are receiving the error message, these receipts cannot be itemized with personal expense down to the maximum because of the error message, so the users are having to enter these receipts in manually.
Is there a way to keep the error message for the maximum value and be able to itemize the receipt even if the receipt is above the limit?
- Edward Edge

hi
no you cannot.
the only way you can change the system error message as warning and proceed.

Large amounts of video data 2TB+

Over the next several months the University of Michigan will be videotaping elementary school classes. We hope to tape at least 40 classrooms with two cameras in each classroom for about 90min each. Im estimating I will have 2-3 TB of video files I need to safely store and edit. Im considering buying External 1TB Firewire Hard drives for this. In the past using multiple external HDDs was not the best solution. When I have more than 1 or 2 Firewire devices hooked up I start losing connections.
Can someone help me locate information on best practices for storing and editing large amounts of video files with PPro?

I'd recommend looking at solutions offered by one of these companies. If you contact them and describe what you are trying to accomplish, they can offer suggestions...
http://www.caldigit.com/
http://www.dulcesystems.com/
http://www.sonnettech.com/product/fusiond800raid.html

Maximum amount of video?

Similar Messages

Maybe you are looking for