Maximum Approvers for PR release WF

Hi All,
For the PR Release procedure, the std workflow is customized and there is no Org structure for agent determination the user who is creating the PR has to manually key in 4 approvers on the PR screen and the remaining 4 are determined using the exit M06B0001, based on release codes.
Is there any restriction that there can only be a maximum of 8 approvers for a PR release worflow.
or
can we have more than 8, bcoz i was asked to add two more approvers for the existing PR realease process.
Thanks In Advance
Prsna
Edited by: Prasanna Ram on Jun 5, 2008 5:14 PM

Hi PR,
first of all why wld the client require more than 8 levels of approval for just releasing a PO (I think as a consultant, try to convince ur client on the intricacies faced with lots of approvers, as it wld firstly delay a simple process like PO release and wld generate chain of mails),
secondly SAP can provide only 8 levels in a release.
Aditya

Similar Messages

PR Status = 04 : FOR OVERALL RELEASE

Hi Friends ,
We have PR status in PR ITEM DETAILS (Me53n) - STATUS Tab , which can have following status
1)Version in Process
2) Active
3) In release
4) release completed
5) For Overall Release
6) Release refused
I wanted to know the meaning of "FOR OVERALL RELEASE" here and when this status gets updated in PR.
Like to share, we have OVERALL release Strategy ( NOT Item LEVEL) implemented for PRs
Regards
Shrey

Thx for reply ...
But here in my case , the status "FOR OVERALL RELEASE" is only being appeared for few PRs, for all other PRs either the status is "IN Release" or "Release Completed".
Although all PRs are subjected to OVERALL Release.
I couldn't identify the reason why only few PRs have "FOR OVERALL RELEASE".Also like to share all such PRs has already been approved by approvers but instead of "Release complete" , system is showing me status "FOR OVERALL Release"
Appreciate if you could let me know the reason for the same.\
regards
Shrey

Maximum Distance for FCOE on Nexus 6004

Hi,
We have a fabric composed by 2 Nexus 6004. The links between the 2 Nx 6004 are configured with vE_ports.
What is the maximum length for the links between the 2 Nexus 6004 ?
Many thanks in advance.
Nicolas.

I found the following, which is most likely not up to date
Q. Is the Nexus 6004 capable of long distance FCoE and will this functionality work at FCS?
The Nexus 6004 hardware allows FCoE distances up to 100km with 10GbE interface, 30km with 40GbE interface between two Nexus 6004 devices. However at FCS, the FCoE distance will be limited to 300m. Future software release will provide CLI tuning options to support longer distance.
•300m FCoE at FCS (optical transceiver distance limitation)
10-km FCoE for 10 GE and 40 GE ports with global QoS policy (roadmap)

Maximum limit to create release estrategies to PO

Dear friends,
Does anyone knows the maximum number of release strategies to purch.order into SAP R/3 ?
Best regards,
Ale

Hi,
Let me Clarify, there are two things here:
1. No, of Release Strategies
SAP can support maximum 1296 Release strategies for a Release group ( the field being a 2 CHAR alphnumeric field can hold 36 * 36= 1296 i.e. from A0 to A9 -
Z0 to ZZ)
2. No. of levels /appprover in a release strategy
This can be 8 max as SAP provides only 8 fields here..
Now in your case the no. 4000-5000 may be there bcos of some limitation of legacy system, where as SAP provides a very flexible arrangement and it can support / supporting requirements of very big companies also, so try to analyse properly whether u can fit in ur requirement with in SAP.
Hope this clears the point
Regards
Dheeraj.

Set Maximum size for a subpanel created with splitter bars in LV8

Does anyone know how to set the Maximum size for a subpanel created with asplitter bar? If I show one cluster in the subpanel and use the scroll bar to scroll, I can see more (blank) area than I want. I just want the user to be able to scroll a cluster within a subpanel while the cluster is larger than the view area of the subpanel. I don't want to let the user scroll outside the cluster.
Ravi Beniwal

I apologize for the mixup in terminology. Please read Pane wherever the word Subpanel was used.
Please see the attached VI for a description of my problem.
I would really appreciate any help with this.
Ravi Beniwal
Attachments:
Pane Scrolling Problem.vi ‏10 KB

Line item not relevant for payment release

Dear Expert,
When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
I also have set payment block in master vendor and OBB8.
Can you tell me why the error message still appear?
Kindly need your help
Thanks and Regards,
YL

Do you have any workflow variant in place?
Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
Vendor itself will not get paid until unless you remove the block option
Thanks

V4.0 won't start. crashes each time. Had to go back to previous version. Version 4 is just not ready for general release, it is massively messed up. The online fixes here had no effect whatsoever. VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

What is the table field for PO releaser in R/3 (4.7 Enterprise)?

Hi Gurus out there:
Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
Many thanks in advance.
/hw

Hi
Have you tried reading the details of the PO Releaser using the BAPIs ?
BAPI_PO_GETRELINFO
BAPI_PO_GETITEMSREL
BAPI_PO_GETITEMSREL List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_RELEASE Release Purchase Orders
BAPI_PO_RESET_RELEASE Cancel Release of Purchase Orders
Related link ->
Re: How to fetch data from back end for PO?
Hope this will help.
Do let me know.
Regards
- Atul

Error while assigning user for release approval path for payment release

Hi everyone,
     I am trying to assign user for payment release in SPRO. I have defined upto 'Define relevant document types for release for payment', after that while assigning user in terms of position for release and save it, i am getting error 'Program error: ASSIGN with length 0 in program "MP120800" '.Because of it i can t proceed further.
The data in details below;
1. Create Workflow Variant for Release for Payment
   1000     SAP
2. Assign Company Code Workflow Variant for Release for Payment
1000     1000     SAP
3. Define Release Approval Groups for Release for Payment
0001     Vendor A
0002     vendor B
0003     Vendor C
0004     G/L accounts
4. Define Release Approval Paths for Release for Payment
0001     Vendor high
0002     Vendor middle
0003     Vendor low
0004     G/L accounts
0005     Other
5. Assign Release Approval Paths for Release for Payment
1000     KZ     0001     0001
1000     KZ     0002     0002
1000     KZ     0003     0003
6. Assign Release Approval Procedure for Release for Payment
1000     0001     20,000.00     KES     1     WS10000052     WS00400011
1000     0002     50,000.00     KES     2     WS10000052     WS00400021
1000     0003     1,000,000.00     KES     3     WS10000052     WS00400022
7. Define Relevant Document Types for Release for Payment
     1000     KR
1000     KZ
8. Define Users with Authorization to Payment Release
1000     0001     1     20,000.00     KES
1000     0001     2     50,000.00     KES
1000     0001     3     100,000.00     KES
here i have selected the option and tried to create Orgobject, i am getting following error
Program error: ASSIGN with length 0 in program "MP120800"
If any corrections in the definitions, Please let me know.
Thanks in advance!!

Hello,
Please start the report RSWOGIND, set also the checkbox "generate all
ObjTypes from new". This should solve the problem.
Best regards, Hana

I want to set a maximum size for pictures when FF shows websites. How can i do that? NO I DONT MEAN "HOW TO ZOOM".

I have FF 34 but this problem has been there for a lot of earlier versions. On many webpages there are pictures that cover my whole screen, and I want to set maximum size for showing images on webpages.
I ONLY wanr to change the maximum size of the images, AND IAM NOT asking about how to zoom the webpage.

Do you want to hide large images or merely make them smaller by setting a max-width and max-height?
You would probably have to use JavaScript (bookmarklet) to achieve this reliably.
There are bookmarklets to make large images fit in the window to avoid a horizontal scroll bar
You can try this code in the userContent.css file (adjust the max-width accordingly).
*http://kb.mozillazine.org/userContent.css
<pre><nowiki>img { max-width: 1024px !important; height: auto !important; }</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
*Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
*Use a plain text editor like Notepad to create a (new) userContent.css file in the chrome folder (file name is case sensitive)
*Paste the code in the userContent.css file in the editor window
*Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userContent.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userContent.css.txt file

Transaction code for bill release

hi all, help me in finding of the transaction code for bill release
thanks..

for Release Orders for Billing
Tcode: V.23
Program: RVAUFSPE
can check here
http://www.easymarketplace.de/transactions-u-z.php
reward if useful
santhosh

Best practice for distributing/releasing J2EE applications.

Hi All,
We are developing a J2EE application and would like some information on the best
practices to be followed for distributing/releasing J2EE applications, in general.
In particular, the dilemma we have is centered around the generation of stub, skeleton
and additional classes for the application.
Most App. Servers can generate the required classes while deploying the EJBs in the
application i.e. at install time. While some ( BEA Weblogic and IBM Websphere are
two that we are aware of ) allow these classes to be generated before the installation
time and the .ear file containing the additional classes is the one that is uploaded.
For instance, say we have assembled the application "myapp.ear" . There are two ways
in which the classes can be generated. The first is using 'ejbc' ( assume we are
using BEA Weblogic ), which generates the stub, skeleton and additional classes for
the application and returns the file, say, "Deployable_myapp.ear" containing all
the necessary classes and files. This file is the one that is then installed. The
other option is to install the file "myapp.ear" and let the Weblogic App. server
itself, generate the required classes at the installation time.
If the first way, of 'pre-generating' the stubs is followed, does it require us to
separately generate the stubs for each versions of the App. Server that we support
? i.e. if we generate a deployable file having the required classes using the 'ejbc'
of Weblogic Ver5.1, can the same file be installed on Weblogic Ver6.1 or do we
have to generate a separate file?
If the second method, of 'install-time-generation' of stubs is used, what is the
nature/magnitude of the risk that we are taking in terms of the failure of the installation
Any links to useful resources as well as comments/suggestions will be appreciated.
TIA
Regards,
Aasif

Its much easier to distribute schema/data from an older version to a newer one than the other way around. Nearly all SQL Server deployment features supports database version upgrade, and these include the "Copy Database" wizard, BACKUP/RESTORE,
detach/attach, script generation, Microsoft Sync framework, and a few others.
EVEN if you just want to distribute schemas, you may want to distribute the entire database, and then truncate the tables to purge data.
Backing up and restoring your database is by far the most RELIABLE method of distributing it, but it may not be pratical in some cases because you'll need to generate a new backup every time a schema change occurs, but not if you already have an automated
backup/maintenance routine in your environment.
As an alternative, you can Copy Database functionality in SSMS, although it may present itself unstable in some situations, specially if you are distributing across multiple subnets and/or domains. It will also require you to purge data if/when applicable.
Another option is to detach your database, copy its files, and then attach them in both the source and destination instances. It will generate downtime for your detached databases, so there are better methods for distribution available.
And then there is the previously mentioned method of generating scripts for schema, and then using an INSERT statement or the import data wizard available in SSMS (which is very practical and implements a SSIS package internally that can be saved for repeated
executions). Works fine, not as practical as the other options, but is the best way for distributing databases when their version is being downgraded.
With all this said, there is no "best practice" for this. There are multiple features, each offering their own advantages and downfalls which allow them to align to different business requirements.

Best practices to reduce downtime for Database releases(rolling changes)

Hi,
What are best practices to reduce downtime for database releases on 10.2.0.3? What DB changes can be rolling and what can't?
Thanks in advance.
Regards,
RJiv.

I would be very dubious about any sort of universal "best practices" here. Realistically, your practices need to be tailored to the application and the environment.
You can invest a lot of time, energy, and resources into minimizing downtime if that is the only goal. But you'll generally pay for that goal in terms of developer and admin time and effort, environmental complexity, etc. And you generally need to architect your application with rolling upgrades in mind, which necessitates potentially large amounts of redesign to existing applications. It may be perfectly acceptable to go full-bore into minimizing downtime if you are running Amazon.com and any downtime is unacceptable. Most organizations, however, need to balance downtime against other needs.
For example, you could radically minimize downtime by having a second active database, configuring Streams to replicate changes between the two master databases, and configure the middle tier environment so that you can point different middle tier servers against one or the other database. When you want to upgrade, you point all the middle tier servers against database A other than 1 that lives on a special URL. You upgrade database B (making sure to deal with the Streams replication environment properly depending on requirements) and do the smoke test against the special URL. When you determine that everything works, you configure all the app servers to point at B and have Streams replication process configured to replicate changes from the old data model to the new data model), upgrade B, repeat the smoke test, and then return the middle tier environment to the normal state of balancing between databases.
This lets you upgrade with 0 downtime. But you've got to license another primary database. And configure Streams. And write the replication code to propagate the changes on B during the time you're smoke testing A. And you need the middle tier infrastructure in place. And you're obviously going to be involving more admins than you would for a simpler deploy where you take things down, reboot, and bring things up. The test plan becomes more complicated as well since you need to practice this sort of thing in lower environments.
Justin

Error in event receiver in workflow for PO release strategy

Hi Expert,
I am trying to trigger an email through workflow for PO release. I have setup following
In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
In PFTC, under Triggering events, Object type BUS2012 is green light
When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.

laurarice wrote:
Hi Expert,
>
> I am trying to trigger an email through workflow for PO release. I have setup following
>
> In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
> In PFTC, under Triggering events, Object type BUS2012 is green light
> When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
> Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.
I suppose, you are using the workflow WS20000075. Add sending email as an additional task to the same workflow in SWDD.

Maximum resolution for external monitor on a B570e

hi,
i've just bought a Lenovo B570e in which i've plugged a Philips 221 V. That has a nominal resolution of 1920 x 1080.
However, when I try and setup its resolution, whether it's through the native windows graphic manager or the intel graphic manager, to 1920 x 1080, nothing is displayed. I need to lower the resolution down to 1680 x 1050 in order for the lenovo to display anything on the external monitor.
am i missing something, or is 1680 x 1050 the maximum resolution for dual display?
thank you
J.

thanks for the help.

Maximum Approvers for PR release WF

Similar Messages

Maybe you are looking for