Maximum Bandwidth on ML-1000-2 POS Interface

I have an ML-1000-2 card on Cisco 15454 ONS, I want to set up IP between two ONS with STM-4 SDH between them. I wand to map the STM-4 to the POS interface on the ML-1000-2 card. Will this POS take the STM-4? If yes, what is the maximum STM bandwidth I can map to the POS interface on the ML-1000-2?

I wand to map the STM-4 to the POS interface on the ML-1000-2 card. Will this POS take the STM-4.
Yes you can map STM-4. But u can use only if u have XC-10G cross-connect card
If yes, what is the maximum STM bandwidth I can map to the POS interface on the ML-1000-2
You can map both port to a STM 16 rate. Each port to STM 8bandwidth.
info from cisco
The new Cisco IOS-based ML-1000-2 card is used for Gigabit Ethernet (1000
Mb/s) when the XC-10G cross-connect card is in use. It supports Layer 2 and
Layer 3 services and provides up to 2.4 Gbps of transport bandwidth, software
provisionable in transport bandwidths from 50Mbps to the ports full line rate, in
STS1, STS3c, STS6c, STS9c, STS12c and STS24c.

Similar Messages

Handling of Down payments / advance payments retail POS interface

Hi all,
Does anyone know if there´s a best practice to handle down payments with POS interface?
thanks in advance
Mariana

Hi Mariana,
Pl use the following link:
help.sap.com/bp_retailv1470/documentation/EN/Store%20Business%20Offline%20EPOS_EN_PRES_V147.ppt
IDOC for down payment is WPUTAB01.
Entries will be as follows:
If a customer is making a down payment of Rs.1000/-
Cash a/c DR 1000/-
Customer or Site CR(Retail Stores if u dont maintain individual customers) 1000/-
When sales are closed say for example Rs.10000/-
Cash a/c DR Rs.9000/-
Customer or Site DR Rs.1000/-
Sales CR Rs.10000/-
In SAP u need to create a Special G/L with Indicator A and this special G/L will be assigned to your main a/c in Tcode OBXR.
F-29 Post Customer Down Payment ,F-32 Clear Customer ,F-39 Clear Customer Down Payment are the FICO transactions which will be used. Pl contact yr FICO
consultant for further details.
Hope this helps you.
Regards,
Mani

What is the maximum bandwidth of a BT Home Hub 3.0...

I've just had an interesting chat with a BT rep trying to sell me a new contract by promising a new YouView box. (As if!) During the conversation some interesting info came out.
I have unlimited Infinity2 installed November 2011. I was supplied with a BT Home Hub 3.0B at that time. Despite the promises of Infinity2 of "up to", (yeah I know ), 76Mb I have never achieved over 38Mb. Strange as BT themselves say my line should be capable 56Mb based on their own tests of my postcode.
When I complained about this I was told that it was the Home Hub 3.0 which is the bottleneck as that has a maximum bandwidth of 40Mb. Can any knowledgeable person confirm this?
If that is the case how could I be sold a 76Mb package when a 38Mb one is available and supplied with only 40Mb hardware to run it. If this is true, in my estimation it is another example of marketing sharp practice in spades.
Any advice from the gurus?
Solved!
Go to Solution.

Can you get your IP Profile by running the BT Performance test at www.speedtest.btwholesale.com, please? When the first test has finished, press the Further Diagnostics button then after you enter your phone number, your IP Profile should be displayed.
I'm interested to see what your Upstream profile is set to as it should be 20 if you're on Infinity2 but may be 10 if you're actually on Infinity1.
If you found this post helpful, please click on the star on the left
If not, I'll try again

How to get the maximum bandwidth/MaxSpeed/Capacity of a Hyper-V virtual-switch?

We are trying to monitor Hyper-V environment (Windows 2008 R2 and Windows 2012) using WMI, and have a very specific question Hyper-V virtual-switch.
We have referred the below mentioned classes and their properties.
1. Win32_NetworkAdapter (namespace:root\cimv2, property:Speed)
2. Msvm_InternalEthernetPort (namespace:Root\virtualization\v2, property: Speed and Maxspeed)
3. Msvm_EthernetSwitchBandwidthData (namespace:Root\virtualization\v2, property:Capacity and Reservation)
All of the above classes and their properties returns 10000000000 (10 GBps) as MaxSpeed, which is NOT correct (as we know that our network connection is of 1 GBps)
Here is our question: How to get the maximum bandwidth/MaxSpeed/Capacity of a Hyper-V virtual-switch?

Until MSFT makes a change to increase the max speed of the virtual switch (and the resulting virtual ports) it will be 10 Gbps.
It has been this way since the original introduction in 2008.
What you are looking for is the most limiting segment in the path. The virtual switch does not assume the properties of the most limiting segment. Since the physical side could be a team, it could be a single NIC.
Your management layer must interpret the most limiting segment.
If you have not already been here:
http://blogs.msdn.com/b/tvoellm/archive/2009/04/23/monitoring-hyper-v-performance.aspx Then take a look.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

POS Interface with SAP

Hi,
We are currently using SAP ECC6.0, not on IS Retail.
As we have quite a few POS machines being used in the business, we would like to interface POS with ECC6.0.
Is there any third party tools available in the market for achieving this solution?
Thanks
Ram.

Hi Ram
SAP offers regarding POS integration to IS Retail basically two options:
- POS DM (see http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=113246846)
- classic POS interface direct in ECC (WPUBON/WPUFIB/WPUTAB IDoc's for POS transactions)
You want to interface directly in to a non IS Retail ECC system.
Question is what do you want to interface only financial postings or also goodsmovements?
How are the stores represented in SAP (customers/plants?)
The transaction logs (TLOG) info from the POS should be converted to a IDoc that will represent you functional needs on the ECC side.
For this mapping SAP offers SAP PO (proces orch), formally know as PI (or before that XI).
There are also several middleware solutions from third party vendors that can work with SAP.
In such a tool you have to map the TLOG to the desired IDoc you want to use in SAP.
(IDoc could also e replaced with a BAPI/RFC for instance).
Regards
Bob

POS Interface

Hi Friends
I am working on Batch Valuation. Using Standard IDOC WPUUMS for sales posting from POS. The standard IDOC do not have Batch field and In have enhanced it to insert batch number in article and billing documents. But still batch number is not getting updated for the purpose of cost price that is condition type VPRS. Standard sales order, delivery and billing process is picking batch level cost price. Can you please let me know any exit for sales inbound processing which can pass batch number in standard table MBEW to get correct valuation for VPRS during inbound processing.
Regards
Gautam Anand

Hello,
The standard POS interface idocs do not include the batch number because it is not relevant nor necessary for the POS sale transactions however, The batch number could be included using an enhancement segment.
Idoc type WPUBON it is possible to have the batch number using E1WPB02-SERIENNR, after which userexit "EXIT_SAPLWPUE_102" can be used the field e1wpb02-seriennr into g_t_imseg-charg. Using the enhancement
segments for WPUMMS you should also be able to add the batch number.
Goodluck.
Suhail Shaik

POS interface without IS Retail

Hello everyone,
We have ECC6.0 but do not have IS retail. There are some retail business in the organization, so we are trying to build a POS interface with development. Does anyone has experience with that? Does anybody know how the AR should be posted with all the sales data uploaded from POS?
Thanks a lot for the help!

To,
Dear Colleague,
The objective can be achieved by using SAP Middleware and you have to define Business Object, IDOC, BDOC, and sites and you have to activate all parameters as same as in both Source system and Target system,
Also try Groupware, FTP Server, TREX, for further compatibility as per your business process.

POS Interface with no POSDM!! Possible?

My client is planning to implement standard POS interface in IS Retail. I have worked several times with POSDM in order to post the Sales, Financial and Inventory Data into SAP, but all used standard POSDM. The client does not have POSDM license and just wants to post the sales and financial data.
Can this be done with standard POS Interface by posting WPUBON01, WPUFIB01 Idocs straight in IS-R?

Hi Raj,
My client is asking for POS to POSDM integration using SAP standard services (not IDOC or BAPI). You have mentioned using standard in your previous integrations. Can you please provide more information on the POS to POSDM that you have done so far. I have no knowledge in this integration. Any documentation or links that you can provide will be great.
Thanks in advance.
Regards,
Srinivas

Idoc erros.......POS interface.......

Hi All,
Using transaction WPER for POS interface i can see the errors associated with idocs, not processed due to errors. My requirement is to capture same error messages and show in output of my report against idoc number
Can anybody tell me from which table or function module , i can capture these error messages.?
Table EDIDS doesnt contain same error messages.
Regards.

Hi Micky,
Exact error messages showing in WPER can't be extracted from EDIDC and EDIDS tables.....
Regards.

Reg timeslot in POS interface

Hi i have pos oc3c/sdh interface. I would like enable 8 timeslot. can anyone help to do this.
regards,
kamalnath

What sort of device is the pos interface on?

ORA-00020: maximum number of processes 1000 exceeded

Hello,
Oracle 10.2.0.4.0
O/S: Windows Server 2003-64 bits
RAM: 32Gb
Instance: opext
show SGA
Total System Global Area 10284433408 bytes
Fixed Size 2180960 bytes
Variable Size 1574353056 bytes
Database Buffers 8690597888 bytes
Redo Buffers 17301504 bytes
Today at 8:01 am we've got this error:
ORA-00020: maximum number of processes 1000 exceeded
That incident was reported in a trace file (opext_ora_8240.trc):
Dump file c:\oracle\product\10.2.0\admin\opext\bdump\opext_ora_8240.trc
Tue Jul 31 08:01:03 2012
ORACLE V10.2.0.4.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
Windows NT Version V5.2 Service Pack 2
CPU : 8 - type 8664, 1 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:18773M/32767M, Ph+PgF:66964M/80966M
Instance name: opext
Redo thread mounted by this instance: 1
Oracle process number: 0
Windows thread id: 8240, image: ORACLE.EXE
ORA-00020: maximum number of processes 1000 exceeded
Died during process startup with error 20 (seq=212441)
OPIRIP: Uncaught error 20. Error stack:
ORA-00020: maximum number of processes (1000) exceededThis was the first time in three years that happened an incident like this. Due my Windows server allows me to setup processes and sessions with a very high value, I did it when configuring this database for the first time.
select resource_name,initial_allocation, limit_value from V$RESOURCE_LIMIT;
RESOURCE_NAME     INITIAL_ALLOCATION     LIMIT_VALUE
processes     1000     1000
sessions     1105     1105
transactions     1215     UNLIMITEDI would like to know what application or process made that my database exceeds 1000 processes. I read that one possiblity is that there's a web app that open many connections to database and doesn't close them.
In my listener.log, I got this at 08:05 am:
31-JUL-2012 08:05:41 * service_update * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36578)) * establish * opext * 0
31-JUL-2012 08:05:47 * service_update * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36579)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36580)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36581)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36582)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36583)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36584)) * establish * opext * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
Host SRVXXX is a server where a web app is and 192.168.1.1 is our firewall. May I think that this server was the one that made so many connections?
I checked alert.log, trc file and listener.log. What else can I check to determine what was the cause of this incident?

user521219 wrote:
Host SRVXXX is a server where a web app is and 192.168.1.1 is our firewall. May I think that this server was the one that made so many connections?
I checked alert.log, trc file and listener.log. What else can I check to determine what was the cause of this incident?check IIS logs
It could result from Denial of Service attack or trojan or virus infecting webserver

Check Light Levels on 7300 POS Interface

Is there a way to check the incoming light levels of SM fiber link to a POS interface on the router itself?

Not that I'm aware of. The card itself has the Carrier/Alarm LED that should be Green if/when a valid SONET signal is detected on the incoming line.
To measure the optical power level though, I believe you need to disconnect the fiber and use an Optical Power meter.
The higher end SONET cards (e.g, those used in the 15400 series) have built-in power signal level measurement but then you pay a lot more for those.

Ensuring maximum bandwidth for iChat connection

I want to use ichat for a corporate event linking two locations. I can get a 5mb/s adsl line not behind a firewall at both locations, or I could use the corporate connection of which I don't know much other than there is/are firewall(s).
In short I want to use the maximum bandwidth to ensure the best quality sound and image. How can I do this? What kind of connection do I need and what do I do to iChat so that it works optimally?
Thanks for any help you can provide
Cheers

Hi,
It does depend on several factors.
Processor
Bandwidth (How much the connection you have is being shared at different times by other computers/apps)
And of course the Internet Speed itself both Upstream and down.
There are settings within the OS and in iChat that can help get the most out of any connection.
Lighting and a good camera are a given.
Not doing things like a download at the same time will give you a better performance.
First set System Preferences > Quicktime > Streaming to 1.5Mbps and restart iChat if Open.
In iChat Menu > Preferences > Audio/Video Section the Bandwidth setting here is Best at NONE.
However some ISPs practice Bandwidth stream Management to combat Peer-to-Peer File Sharing and iChat can suffer as a consequence and you should try 500kbps as well.
8:36 PM Friday; February 6, 2009

Connection between CRS 1 POS interfaces and 7600 POS Interfaces

Hi,
I am trying to connect a CRS 1 POS interface to a Cisco 7609 POS interface and i keep geting the following alarms, and the line protocol i s down on both device ends
RP/0/RP0/CPU0:at_crs_01#LC/0/2/CPU0:May 1 10:42:47.363 GMT0: spa_oc48[245]: %L2-SONET_LOCAL-4-ALARM : SONET0/2/0/2: SLOS cleared.
Please help!!
Attached are the configurations on the Devices

Hello Obiora,
if the two are connected in back to back: one side provide the clock with
clock source internal
the other side should take the clock from line
clock source line
I would change one of the two in clock source line
Hope to help
Giuseppe

POS interface using JCo

Hello,
We're currently developing a JCo based interface to integrate a java based POS with SAP ERP. What are the relevant BAPI's to be used in order to implement an inbound (upload sales data) and outbound (download article data and prices) interface?
Thanks in advance for your response.

Hello,
We're currently developing a JCo based interface to integrate a java based POS with SAP ERP. What are the relevant BAPI's to be used in order to implement an inbound (upload sales data) and outbound (download article data and prices) interface?
Thanks in advance for your response.

Maximum Bandwidth on ML-1000-2 POS Interface

Similar Messages

Maybe you are looking for