Maximum bit rate for video

I am using Handbrake to convert some video for use on my iPod. Their FAQ alleges that with the advent of iTunes v7.4 the iPod can handle an average bit rate of 2500 kbps. However, I find that the video intermittently pauses briefly on playback if I encode at that rate. Does anyone know the maximum bit rate that the iPod can handle?

Changes to iTunes will have no effect on what the iPod can handle. Different software and hardware.
Which iPod are we talking about? The original 5th generation iPod or the second versions (aka "5.5" gen)?
http://support.apple.com/specs/ipod/iPodwith_video_30_60GB.html
says...
H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
http://support.apple.com/specs/ipod/iPodFifth_Generation_Late2006.html
says...
H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per sec., Baseline Low-Complexity Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 768 Kbps, 320 by 240 pixels, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per sec., Simple Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats
Patrick

Similar Messages

What is the maximum bit rate for a short NTSC standard def DVD?

I have about 30 minutes of content from FCP that I want to put on a DVD.
At first I tried iDVD and had problems with burning (although I did somehow make one DVD). So I built the project on DVD SP and made a DVD. However, the iDVD version looked much better. I checked out the file sizes and saw that there was 2 gigs on iDVD and only 1.6 DVD SP. Then I discovered the encoding options on DVD SP and I was curious what is the recommended average and maximum bit rate should be for the highest quality, yet still works in most DVD players?
Thanks.

DVD Bandwidth
The rate is not based on running time.
Some thoughts on rates
7.2 - 8.0 seems to be the general consensus for discs from computers. I play more conservative for the reasson listed in that link

Optimal bit rate for videos?

I've used 512 kbps bit rate for my videos, their size was really good (low) but the quality was just too poor...
What do you think the optimal bit rate would be for videos? (A cartoon show, actually)
Thanks.

I use about 1000

Maximum bit rate iTunes/iPad

I am creating movies with Adobe Encore. Format is H.264 720p.
Encore doesn't have a preset for iPad. After the movie is created I drag it into iTunes (no problem), then I try to sync the iPad and get the message "movie was not transferred to iPad because it cannot be played in this iPad".
What is the maximum bit rate that can be used?
Thanks.

It seems to vary depending upon the specific format used. The iPad tech specs for video:
- H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
- MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
- Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Note the "up to 2.5 Mbps" for MPEG-4 and "up to 35 Mbps" for M-JPEG

Maximum Bit Rate help

I have been trying to find the best bit rate settings to display from a USB drive on an Xbox 360 or PS3. I found the recommended settings but the maximum bit rate that I set it at, is always exceeded during playback.
For example if I am using the h.264 codec with the bit rate settings of VBR and the maximum bit rate set for 10 Mbps, my bit rate will always spike way higher then 10 Mbps during scenes with more movement. A scene where I'm pointing my camera out of a moving car with houses going by displayed a bit rate of 38.8. In case anyone is wondering I use the bit rate counter on my PS3 to find the bit rate at any give time.
Now When the bit rate spiked at 38.8 for that scene, it dipslayed fine on my PS3, but when played back on my Xbox it stutters a little at that moment.
If I use a CBR of 10 Mbps the bit rate still goes quite a bit over 10 Mbps but didn't approach 40 Mbps like it does when using a variable bit rate. When using a CBR it played back flawlessly on both devices but there was a little drop in quality.
Is there something I am doing wrong or is this just how it works? I assumed the target bit rate is what you are shooting for and the maximum bit rate would never be exceeded. Is that not the case?

I took that it could be inaccurate in to consideration but when I play a blu-ray back the bit rate usually fluctuates between 25-35 Mbps so I assumed the readings were pretty accurate.
I'll try the VLC player as you suggested when I get home. Does it show you the bit rate during playback, the average bit rate, or what?
Also if I set my maximum bit rate to 10 Mbps should it never exceed that?

Best bit rate for blu rays with Toast 11

I'm burning a ProRes422 (uncompressed @ 18GB) movie to blu-ray using Toast 11 Titanium. The maximum bit rate is 9.0 Mbps. Is this sufficient? It seems very low...
Compressor has never worked properly with burning a blu-ray (I know there are more custom settings). I would use this but have had no luck, the blu-ray never burns properly only had luck with Toast.

Thanks for the info, somehow I've had to pay extra for the blu-ray plug in to burn a blu-ray at 26Mbps.
Now I need to figure out why the audio now is 'cracking' on the deeper parts of the soundtrack. The audio is set to PCM 96kHz 24 bit just like the original Pro Res file. In the original it does not 'peak' or 'distort' on the deeper parts of the soundtrack when playing in Quicktime, not sure what is happening to the audio after being burned to blu-ray. I might have to post in Soundtrack to get some feedback, any suggestions?

Bit Rate for Mixed angle DVD

What bit rate will give an decent quality image if there are 4 video streams (v1-edited video,v2-4 source angles), 1 ac-3 audio stream, 1 mpeg1 audio stream. Three of the video streams are alternate angles that popup for brief ( 1 to 5 minutes ) periods of time in a 1 hour wedding ceremony. I guest the safe bit rate for all streams is around 8.5, the manuals say the max is 10.3 mbps. Can I mix bitrates for video in a mixed-angle track or do they all need to be the same?, is four video tracks just too much info ?
Thanks for all the help !

One last question; if there are four user selectable streams are you adding up the bitrate for all streams or is the total just the stream that's being played plus any audio that gives you your total ?
thanks

Sample/bit rate for Garage Band '08

Hello, I don't have a Mac yet, but am going to get the mini soon and do some acoustic/keyboard stuff in Garage Band to get back into recording. What is the sample and bit rate for the new version? I had read that older versions were 16?
Thanks.
Joe

joewherefast wrote:
Hello, I don't have a Mac yet, but am going to get the mini soon and do some acoustic/keyboard stuff in Garage Band to get back into recording. What is the sample and bit rate for the new version? I had read that older versions were 16?
Thanks.
Joe
The sample rate is fixed at 44.1kHz. The bit depth (audio resolution) is selectable at either 16 bits or 24 bits.

Suggestions for bit rate for books on cd

Hi
I'm trying to clear some room on my ipod. Thus far I've been importing everything at 192. I'm hoping to reimport some of the books on cd that I've put on and would like some suggestions as to how low of a bit rate I can use without affecting sound quality too much (I tried 96 and really couldn't tell the difference).
Thanks
Evelyn

Hi, Evelyn.
For spoken word recordings, 32 kbps is generally considered an acceptable setting.
And, for what it's worth, that's the Bit Rate for Audiobooks purchased from the iTunes Store.
EDIT: You may also want to have a look at these suggestions: Link

Best average bit rate & max bit rate for DVDs playing on laptops...

I encode and burn many DVDs for use in regular DVD players....usually in the half hour range and have been encoding with Compressor 3 using these specs:
6.6 average bit rate
7.8 max bit rate
Those same DVDs, which play flawlessly in the DVD players, can occasionally hiccup when played from a laptop. Should I change the max bit rate from 7.8 to 7.7. or lower? Is that the biggest part of the equasion that may affect a laptop's ability to play without choking?
Many thanks,
John

Thanks for all your help, David S, but the point is
that I have tried many different bit rates, from 4.0
to 7.0, and I don't have time to waste all day trying
different bit rates for an 8-minute project.
My main question is: Why would it work fine on all
of my other short projects, including the 8-minute
one, and then when I cut out 20 seconds of that same
project, it starts screwing up!?!
I am going to try trashing my preferences. It is
starting to seem like a corrupt pref file to me.
It turned out to be a corrupt pref file, as I thought. Thanks for your many, many questions, David S.

Can I tweak the bit rate for iPod video?

I am starting to produce quite a bit of iPod video for podcasting. Some of our newer pieces are up to 2 hours long and I want to cut the bit rate back so that the files aren't so large. There does not seem to be a way to tweak the m4v parameters in Final Cut Pro or Quicktime Pro. I was able to make an mp4 video file with what a I wanted. It worked in iTunes but the iPod would not recognize it. Is there anyway to tweak the bitrate when making a video for iPod?

Is there anyway to tweak the bitrate when making a video for iPod?To exercise the greatest amount of control, use MPEG Streamclip (free). The MPEG-4 iPod presets can be user modified to limit data rates as desired.
I was able to make an mp4 video file with what a I wanted. It worked in iTunes but the iPod would not recognize it.The "Movie to MPEG-4" exports are limited to the 320 x 240 "Baseline" profile (up to v1.3).
There does not seem to be a way to tweak the m4v parameters in Final Cut Pro or Quicktime Pro.The "Movie to iPod" export is adaptively pre-set for maximum "LC" (640 x 480) and "Baseline" (320 x 240) data rates. There are no manual adjustments.

Common video dimensions and bit rates for dynamic streaming?

I'm going to be converting my videos to flv and am trying to decide what to use for video dimensions and bit rates. Some of my users have slow computers and connections so I'm thinking 150 on the low end.
Is there a common practice? What has worked well for you in the past?

Hello MrWizzer
I am not sure what FMS version you are currently using.
Well, if you look at the sampe vod folder that ships with FMS4.5, it has files encoded @ 150kbps, 500 kbps, 700 kbps, 1000 kbps, 1500 kbps.
I am sure that all of these files stream perfectly fine given the correct bandwidth environment.
Its totally depend upon the FMS hosting service provider depending upon the user base of a particular provider.
You need to judge what kind of BW is available to your viewers and put the files encoded at appropriate bitrates.
You may also look at http://www.adobe.com/devnet/flashmediaserver/articles/beginning-fms45-pt06.html for refrences.
Regards,
Shiraz Anwar

Optimal Audio Sample/ Bit Rate for DVD?

In using recorded material to add to DVDs for family and friends, that is, non-commercial, what is recommended formatting for the audio file? Soundbooth seems to default to 48000 Sample Rate/32 Bit but if I use that am I achieving anything over a simple 44100 Sample Rate/16 bit, since the human ear cannot detect above 20000Hz? I want the DVDs to sound as good as possible in STEREO.I don't want to cross-post, so sorry if this is wrong forum.
Thanks...

I'm not positive about this, but I think they used 48KHz simply because most professional audio/video gear uses that same sample rate. This makes it easier to tramsfer audio from DV, DAT, etc. without the need for resampling.
As for why 48 in the first place? This has to do with the Nyquist limit... and that's way too deep for this thread!
Higher bit depth is another thing all together: This represents the number of possible volume levels (dynamic range) of each sample. 16 bit has 65535 levels which is a dynamic range of 96 dB. This is fine for final delivery -- assuming that the audio was well-mastered at an appropriate volume level.
During recording and editing, however, where it is likely that adjustments to dynamics (compression, expansion, noise gating, fading) and effects will be applied, it is best to use a higher bit depth so that less information is lost (quantized) on successive transformations of the audio. It also will keep broadband noise from creeping in when the audio is amplified.
For example, if you have audio recorded in 16 bit and then you amplify it to be 20 dB louder, your dynamic range has decreased to 76 dB and the noise floor has been raised -- meaning there is a constant whitenoise "hiss" in the background.
32 bit audio is different. The dynamic range is sufficient enough so that moderately large amplification will not neccessarily result in audible background noise.
The 32 bit audio is then downsampled during mastering to 16 bit for final delivery (often with aid dithering, noise shaping, etc. to avoid distortion and give the "illusion" of greater dynamic range)
I do agree that 48 KHz is a little bit silly for DVD when the audio is AC3 compressed anyway. I am fairly certain that none of these ultrasonic frequencies will survive AC3 encoding -- even at high rates.

Boosting Bit Rate for Higher Quality

In Two Pass VBR Best DVD (bit rate defaults to 6.2mbps), if I pump up the bit rate to 9mpbs or higher, will my DVD quality increase? File size is not an issue -- it's a 15-20 minute video.
David A.

In theory, yes.
However - +and this is key+ - increasing the bit rate past a certain point will reduce compatibility with many set-top players. For the most part, so long as you're using Dolby Digital audio, you can make due with increasing the average to, say, 6.5 mbps. I personally would not advise going higher than 6.5 mbps unless you're only using the DVD for playback on systems you know you can control (your home or you mac).
Also, there is a certain point of diminishing returns with encoding. The 90 preset (6.2 & 7.7) is already at the high end of things.

Best Bit Rate for Better sound

I’m new to the iTunes/iPod thing. A friend told me that he re-sets the bit rate from the default of 128 kpbs to the top of 320 kbps for better quality. [He plays everything off of his computer which is wired to speakers throughout his house and does not travel or drive much so hardly uses his iPod.] I played around a tad with the various rates on the same album and found that a fairly short one used 34.9 MB at 128 kbps, 52.1 MB at 192 kbps, 60.8 MB at 224 kbps and 86.6 MB at 340 kbps. Another friend told me that he noticed a big difference when he played a song off his iPod through his several thousand dollar system if it was imported at 128 kbps. While hard disc space is cheap and I would simply opt for the higher quality setting, the iPods are not so big when one almost triples the file size.
I tried to figure out what the max bit rates in the CDs are so that could guide the max import rate, but I could not and that question may make no sense at all anyway.
What is the max that a human can notice the difference at and what have folks found to be the best balance between sound quality and storage space?
Thanks for your help.
PC Windows XP

Monty, this is really going to be up to your ears to decide. All I can tell you is my experience during the 2+ years of owning an iPod. I initially thought AAC @ 128 was satisfactory. I then started experimenting with various bitrates, but kept the AAC format. I decided that 192 was a discernible improvement over the 128. Not to go into a lot of detail, but I, quite by accident, had one album download at 256 & thought, "Wow, this is unbelievably better sound, even over inexpensive computer speakers." At that point, I started importing everything in AAC @ 256 VBR which I feel is pretty darn close to CD quality sound. I have a 60GB iPod that I'm willing to sacrifice some capacity in order to ensure the best audio quality I can. This is also why I do not buy frequently from the iTunes store as I do not feel the 128 downloads are the best quality. I buy & my own CD's, now, to insure good quality. I will by the occasional song from the store when I do not care to buy the whole CD. Hope this helps!

Maximum bit rate for video

Similar Messages

Maybe you are looking for