Maximum character length of user id (UID)

hello
i have couple questions about sunone directory
(1) what is the max length of UID i can have?
(2) where can i find the development (programmer's ) guide to find such information?
thank you,

1. 256
2. The best online source of this information is probably the IBM LDAP schema reference site:
http://www-1.ibm.com/servers/eserver/iseries/ldap/schema/
Just click on attribute types on the left hand menu then scroll down to the attribute you wish to find out information about. You will notice OC information is on this site as well ...
HTH,
-Chris Larivee

Similar Messages

  • How set maximum character length in Fxml

    Hey can any body help me set Maximum character length in Fxml.
    thanx in advance

    I wrote my own TextField.
    I can't give you the code right now, but it's easy to create it by yourself.
    0 - create a private method that deletes any unwanted char/s: restoreRightLength();
    1 - Add a listener on the textProperty of your TextField/TextArea that calls restoreRightLength() method.
    2 - Override  the following methods:
    @Override
    public void replaceText(int start, int end, String text) {
    super.replaceText(start, end, text);
    restoreRightLength();
    @Override
    public void replaceSelection(String text) {
    super.replaceSelection(text);
    restoreRightLength();

  • Editor maximum character length allowance

    Greedings,
    Is it possible to make an editor to have a max character length? and how is that possible?
    Thank you

    1. 256
    2. The best online source of this information is probably the IBM LDAP schema reference site:
    http://www-1.ibm.com/servers/eserver/iseries/ldap/schema/
    Just click on attribute types on the left hand menu then scroll down to the attribute you wish to find out information about. You will notice OC information is on this site as well ...
    HTH,
    -Chris Larivee

  • "Maximum Session Length in Seconds" Not Working In Apex 3.2

    Hello.
    I am using Apex 3.2 and have noticed that pages are session timing out after just 10 minutes of inactivity. I am aware of the new security attributes "Maximum Session Length in Seconds" and "Maximum Session Idle Time in Seconds".
    I asked our Apex admin and he reported that these attributes are set to 8 hours on the instance level. Within my own Apex application, these two attributes are not set at all. According to the popup help window associated
    with these attributes, if they are not set, then there is no timeout at all that is enforced.
    So, does anyone know why my application pages are session timing out after just 10 minutes of inactivity and users are forced to login again?
    Thank you.
    Elie

    Scott,
    Thank you for your help on this.
    I've uploaded my Apex app called "Online Model", App ID 62063 in my workspace EEG on the Oracle hosted site apex.oracle.com.
    Workspace = EEG
    Username = [email protected]
    Password = galaxy (I'll change the password after you're done helping me)
    Orginally, this app had "Database Authentication" set. I changed this to "DAD Authentication" so that you can simply run it without having to login.
    If I open up the app in developer mode and simply leave it alone for, say, 30 minutes and then click on the "developer bar" to see the definition of one of the pages, Apex instead prompts me to re-login again into Apex. I've not placed any values in any of the "Session Timeout" fields on any of the pages in this app.
    When the same app is run as a user (that is, no "developer bar" appears at bottom of pages), again the page will time out after about 30 minutes of in-activity.
    And as mentioned in my original posting, our Apex Admin has the "Administrator Timeout Session" field set to 8 hours.
    The Apex 3.2 docs say that if no value is placed in these Timeout Session fields, then there is no timeout imposed.
    Thank you for your help. It's much appreciated.
    Elie

  • SQL Loader-704: Internal error: Maximum record length must be = [10000000]

    Hi,
    running SQL*Loader (Release 8.1.7.2.1) causes an error "SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]". This error occurs when SQLLoader is trying to load several thousand records into a database table. Each record is less than 250 bytes in length.
    Any idea what could cause the problem?
    Thanks in advance!
    Ingo
    And here's an extract from the log file generated by SQLLoader :
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 50
    Bind array: 1360 rows, maximum of 10485760 bytes
    Continuation: none specified
    Path used: Conventional
    Table "SYSTEM"."BASICPROFILE$1", loaded from every logical record.
    Insert option in effect for this table: APPEND
    TRAILING NULLCOLS option in effect
    Column Name Position Len Term Encl Datatype
    UUID FIRST * O(X07) CHARACTER
    DOMAINID NEXT * O(X07) CHARACTER
    LASTMODIFIED NEXT * O(X07) DATE DD/MM/YYYY HH24:MI:SS
    ANNIVERSARY NEXT * O(X07) CHARACTER
    BIRTHDAY NEXT * O(X07) CHARACTER
    COMPANYNAME NEXT * O(X07) CHARACTER
    DESCRIPTION NEXT * O(X07) CHARACTER
    FIRSTNAME NEXT * O(X07) CHARACTER
    COMPANYNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
    FIRSTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
    GENDER NEXT * O(X07) CHARACTER
    HOBBIES NEXT * O(X07) CHARACTER
    HONORIFIC NEXT * O(X07) CHARACTER
    JOBTITLE NEXT * O(X07) CHARACTER
    KEYWORDS NEXT * O(X07) CHARACTER
    LASTNAME NEXT * O(X07) CHARACTER
    LASTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
    NICKNAME NEXT * O(X07) CHARACTER
    PREFERREDLOCALE NEXT * O(X07) CHARACTER
    PREFERREDCURRENCY NEXT * O(X07) CHARACTER
    PROFESSION NEXT * O(X07) CHARACTER
    SECONDLASTNAME NEXT * O(X07) CHARACTER
    SECONDNAME NEXT * O(X07) CHARACTER
    SUFFIX NEXT * O(X07) CHARACTER
    TITLE NEXT * O(X07) CHARACTER
    CONFIRMATION NEXT * O(X07) CHARACTER
    DEFAULTADDRESSID NEXT * O(X07) CHARACTER
    BUSINESSPARTNERNO NEXT * O(X07) CHARACTER
    TYPECODE NEXT * O(X07) CHARACTER
    OCA NEXT * O(X07) CHARACTER
    SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]

    As a second guess, the terminator changes or goes missing at some point in the data file. If you are running on *NIX, try wc -l data_file_name.  This will give a count of the number of lines (delimited by CHR(10) ) that are in the file.  If this is not close to the number you expected, then that is your problem.
    You could also try gradually working through the data file loading 100 records, then 200, then 300 etc. to see where it starts to fail.
    HTH
    John

  • Maximum record length in internal table?

    Is there a maximum record length in an internal table?  Please note:  My question is NOT related to table space.  I'm referring only to the length of an individual record (A.K.A. row length).
    I am using a work area to insert data into an internal table.  Both the work area and internal table are defined by the same structure.
    The structure has a total length of 672 bytes.  For the sake of this discussion I'll point out that at the end of the structure, bytes 669, 670, 671, and 672 are four separate fields of 1 character each.
    When viewing the work area record in the debugger I'm seeing all the fields and all the values.  When viewing the internal table in the debugger after a record is inserted, the internal table ends with the field defined at Byte 670.  The internal table does not include the two fields defined at Bytes 671 and 672.
    Am I to assume from the above explanation that the length of a record ( A.K.A. row) in an internal table cannot exceed 670 bytes?
    Thank you.

    Manish,
    False alarm!  While, technically, you didn't answer my question, your request for code ended up helping me answer my own question.
    To provide you with some code I wrote a simple test program using the record layout referred to above, with a DO loop to put some records into the internal table, followed by a LOOP AT, with accompanying WRITE statements to display the contents of the internal table and demonstrate that the last two fields weren't being stored.
    However, when I ran the test program, the last two fields were being displayed.
    It was at that point, when stepping through the debugger that I noticed the scroll arrows above the last column of my internal table that allowed me to scroll to the right and see my final two fields.
    Apparently, because of the large number of fields in my internal table I had reached the default display length of the debugger.  While I was obviously aware of the scroll bar found at the bottom of the display, I had never worked with an internal table of that width in the past and hadn't even noticed the scroll arrows above the last column before.
    Thanks for taking the time to respond helping me get to the solution.

  • I've created a character report without user

    I've created a character report without user parameters that works just fine.
    The moment I've created a user parameter, without even putting it in a query, instead of
    a report I've got the message: "REP-1219: 'repeating_frame_name' has no size - length or with is zero".
    The same message I've got few times before:
    1. When in the Layout Model -> Main Section Width and Height were not set correctly. Setting Width and Height to right numbers solved the problem
    2. When 2 frames were overlapping. Turning off Snap to grid and moving the frames just a little from one another solved my problem.
    What should I do this time ?
    What I have installed is:
    Report Builder 6.0.5.35.0
    ORACLE Server Release 8.0.5.1.0
    Oracle Procedure Builder 6.0.7.2.1
    Oracle ORACLE PL/SQL V8.0.5.1.0 - Production
    Oracle CORE Version 4.0.5.0.0 - Production
    Oracle Tools Integration Services 6.0.5.32.0
    Oracle Tools Common Area 6.0.5.32.1
    Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
    Resource Object Store 6.0.5.0.1
    Oracle Help 6.0.5.35.0
    Oracle Sqlmgr 6.0.5.33.0
    Oracle Query Builder 6.0.5.6.0 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle ZRC 6.0.5.24.0
    Oracle Express 6.0.5.11.0
    Oracle Virtual Graphics System 6.0.5.32.1
    Oracle Image 6.0.5.34.0
    Oracle Multimedia Widget 6.0.5.34.0
    Oracle Tools GUI Utilities 6.0.5.35.0

    SEGURAMENTE UN FRAME TIENE POCA ALTURA,
    A MI ME HA PASADO LO MISMO,LO QUE HAGO ES QUE LOCALIZO EL ITEM Y LE DOY MAS ALTURA, POR ALGUNA RAZON REPORTS EN MODO CARACTER NO ACEPTA UNA ALTURA CORTA

  • Unity 7.02 maximum message length only 30 secs

    Unity 7.02 maximum message length is approx 30 secs regardless of the settings in sys admin.
    Has anyone encountered this issue?

    Hi Peter,
    It sounds like you may be running a Demo License;
    Limits on a Cisco Unity Demonstration System
    Depending on the type of license file you use-Default License File or Time-Limited License File-the Cisco Unity demonstration system will have the limits listed below.
    Default License File
    •10 languages
    •2 RealSpeak text-to-speech (TTS) sessions
    •10 mailboxes for one of the following subscriber types:
    -Unified Messaging (UM) subscribers
    -Voice Messaging (VM) subscribers
    •10 Cisco Unity Inbox subscribers
    •2 voice ports
    •2 voice-recognition sessions
    •30-second limit for messages
    •The ability to integrate with any supported phone system
    Time-Limited License File
    The time-limited license enables either Unified Messaging (UM) or Voice Messaging (VM) with the following limitations:
    •UM feature package
    -50 UM subscribers with 16 sessions
    -2 RealSpeak text-to-speech (TTS) sessions
    -2 languages
    -AMIS
    -16 voice ports
    -2 voice-recognition sessions
    •VM feature package
    -50 VM subscribers with 16 sessions
    -2 RealSpeak text-to-speech (TTS) sessions
    -2 languages
    -25 Cisco Unity Inbox users
    -16 voice ports
    -2 voice-recognition sessions
    The time-limited license includes the following additional limitations:
    •Time limit (after which Cisco Unity stops handling calls)
    -60 days
    -90 days
    •Only one license file on the Cisco Unity server is permitted
    •Non-renewable
    •Locked to the specific MAC address of the network interface card (NIC) on the Cisco Unity server
    •The ability to integrate with any supported phone system
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/702curelnotes.html#wp49973
    Hope this helps!
    Rob

  • Upgrade error  "exceeded maximum allowed length (134217728 bytes)

    Hi:
    I'm trying to add a patch to the OEM patch cache, and I'm getting an error:
    Error: - Failed to Upload File.Uploaded file of length 545451768 bytes exceeded maximum allowed length (134217728 bytes)
    The patch file is what it is (545451768 bytes). How do I install this patch? I'm trying to upgrade a 10.1.0.3 DB to 10.1.0.4
    Thanks

    This log is for external user.
    Did you deploy Lync edge server?
    The Edge Server rejects the authentication request, and redirects the Lync 2010 client to the Lync Web Services (https://lyncexternal.contoso.com/CertProv/CertProvisioningService.svc).
    It seems the redirect fails, please check the event view on Lync edge Server.  
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Error message "Maximum character output size limit reach Err_WIS_30272"

    Users are getting the Error message "Maximum character output size limit reach Err_WIS_30272" while creating the Universe Query in the Live Office, but when they create the same query in the Web intelligence Report then it work fine.
    To resolve this error message we can have to increase the value of "Maximum Character Stream Size" parameter in the Web intelligence Processing Server.
    But i want to know the reason why the error message is only appearing in the Live Office Query, where it work fine in Web intelligence Query.
    Are there architectural difference in Web intelligence and Live Office?

    Hi,
    maybe one of the following SAP Notes will answer your Question.
    https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133373030343526
    https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133373537353526
    https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133383336363426
    Regards
    -Seb.

  • Character Length restrictions in BW

    Dear BW Experts,
    We are getting data from an external source. We have a field whose length is more than 60. I am unable to bring this field in to BW since BW has the restriction of not more than 60 character length. I cannot split the field since it is like a comment field.
    Could you tell me if there are other ways of getting such data in to BW where the length is more than 60 say like 500 or 1000 in length.
    Thanks,
    Sai

    Hi Sai,
    As we all know maximum length of info object is 60.The only way to get the data more than 60 is create another info object and add this as attributes to the base info object and make this attributes as display attributes.
    check the below blog, you have clear explanation
    /people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
    Regards,
    Venkatesh

  • ID character length - 16 or 20?

    What is the max character length of dimension IDs in BPC for NW? I thought it was 16 initially but now apparently is 20? According to an SAP doc:
    "Dimension field names may ONLY be max of 16 characters instead of 20"
    I understand property values can be up to 60 or greater. But, what about the the value of an ID? Does the above mean IDs can only be 16?

    Hi John,
    According to Scott from SAP, ID can be 20 characters.
    Ba
    Here is message from page 5 of below thread:
    BPC NW - Questions on How to Automate Master Data Loads
    Scott Cairncross      
    Posts: 272
    Registered: 1/5/05
    Forum Points: 548 
       Re: BPC NW - Questions on How to Automate Master Data Loads
    Posted: Jan 21, 2010 10:17 AM    in response to: Dries Paesmans           Reply 
    MDA - 20100121.zip (126.5 file.size.kilobyte) 
    Hi Dries,
    Velavan and I have been meaning to publish a new guide for sometime however we have not gotten the time to update everything. I am attaching a transport with the latest and greatest updates here to the forum for your and the rest of the communities benefit.
    There are some things to watch out for. Specifically if you are using scenario 1 of the guide and you are trying to load from an infoObject into a BPC Dimension where the infoObjects technical length is greater than 20 (the maximum length for a BPC Dimension) it automatically generates a hash key for the ID value that is 20 characters in length. This is not the behavior when running scenario 2.
    I hope this update helps.
    Cheers, Scott

  • Increasing character length

    Hi Experts,
                     I want to increase the character length of column in MS SQL Server 2005. How to modify the length of character.

    Hi Shailesh......
    You can modify the character length of UDF from Tools> Customization Tools> User Defined Management
    Select the UDF and press Update button and increase character length. Here also you can increase length and can not decrease it......
    Regards,
    Rahul

  • How to get Maximum Number of Concurrent users for last few days?

    Hi,
    How I can get maximum number of concurrent users which were logged in to the system (ECC 5.0) I mean I want to check the hostory for last few weeks. Is there any way to get the same? I know that I can get Cumulative number of users in st03 under Expert mode but that is the number of users logged into the system during the day. Is there any place where SAP maintians the High Watermark of Number of concurrent users reached in the system?
    Thanks in advance...
    Regards,
    Pravin

    Sorry I really missed that I have posted a question here on sdn. I wanted to know this for planning the system hardware requirements. Activities like PM ( Performance Management ) happens once a year and during that activity we see heavy user loan on the system so if I have the exact stats of 1 or 2 years data I can size the system better next time. Fortunately last 2 years PM was very smooth for us. In that look for the improvement because each time we had little extra Harware. By doing the exact analysis we can save a Cost of ownership...
    I was looking for R/3 users. I could see the number in st07 but I want to know the exact number at particular time.. I believe that st07 stores only for few days.
    Thanks
    Pravin

  • How to find out maximum number of login users?

    Hi all,
    Is there anyway to find out what is the maximum number of login users since a database is started? Maybe I should ask, what's the largest number of sessions has been opened in a busy time of a database since it is started?
    I know v$session is my target. But how can I find out hte HWM of opened sesions?
    Thanks.

    Thanks Serch-NET. That's what I'm doing today. I should be a little more specific. I'm looking for a script that lends itself to automation. A script that can determine all the databases on a given server, find their background dump dest., grep all alert logs and return the highest of the HWM's. This is all scripting I could do myself, but being a follower of the Lazy DBA, I was hoping someone else had done it. :-)
    Thanks again.

Maybe you are looking for

  • Access to customizing default: report templates

    I seem to remember far back in the corners of my memory, someone here on the forum mentioning that although we didn't have access at the time (probably back at HTMLDB 2.0) to customize the default report templates, that there were plans to make this

  • Pictures not getting through on Attachment

    I have designed a website (Dreamweaver 8) and when I forward a page from it via Microsoft Outlook (as an attachment), the text makes it, but the pictures do not?  The alternate text does make it in place of the pictures.  How do I send the webpage an

  • Adobe Acrobat X Standard

    I have created a fillable PDF application form which we placed the link for it on our website. The forms were turned in regularly and showing up in the response file for a week. Then after that they stopped. I submitted and form to myself to test and

  • How can I change the name of the XML file which is submitted by mail?

    Hello Everybody, If I submit my pdf file as XML I will get something like this: MyFile.PDF -> submit as XML -> MyFile_data.XML My problem is with the _data at the end of the file name -> this addition is coming from the windows logon language, I know

  • Google Toolbar is blank in FF 3.6.10 on MacBook Pro running latest OS. Preferences look strange in settings.

    On MacBook Pro, running the latest OS, Google Toolbar is entirely blank. Setting preferences shows duplicated settings icons on the left with no "Close" button at bottom.