Maximum Content Height

What is the maximum height for an iWeb page? Can't seem to get a content height of more than 4000 pixels. Would that be it?

Jeffrey ~ +"To increase the default max height of an iWeb page, add a texbox and move it down beyond the 4000pixels perimeter."+
...Quoted from this old thread:
http://discussions.apple.com/thread.jspa?threadID=1686399
And found by doing THIS.

Similar Messages

I need more content height

It seems the maximum for the content height is 4000px, which isn't enough for me. Is there any way to get more content height? Does iWeb '09 have a different maximum content height?
Thanks

Jeffrey ~ +"To increase the default max height of an iWeb page, add a texbox and move it down beyond the 4000pixels perimeter."+
...Quoted from this old thread:
http://discussions.apple.com/thread.jspa?threadID=1686399
And found by doing THIS.

I have a 13 inch macbook (late 2007) what is the maximum allowable height for a hard drive?

what is the maximum allowable height for an internal hard drive. I want to replace my hard drive are there any other things I should make sure of in terms of compatability?

timfromdoylestown wrote:
would they erase it and reformat it? what is the purpose of doing so?
they have to format it to make it mac "compatible", for a lack of better terms. I don't know what they would do.

Content Height Problem

Hi all,
Just now i faced a Crazy problem....
When The flash content height is Over than 4000 My content is
not displayed correctly ... Say for example, i am having a Strip
with a Dynamic Text not more than that... I am displaying something
in the Strip dynamic text.... Well, i am duplicating the MovieClip
to generate some more clips,,, upto some points it s working
fine(With the same Code no change in the GUI also)
If the _y position exceed 4000 it creates problem, i can able
to view the Dynamic text but not the strips.....
can any one guess what s the problem here

Yes exactly i am talikng about pixel....
Terribily the problem is I can able to View the Dynamic text
in that area but not the Background Vector Rectangle...
I need more than this much of height, bcz i am Developing a
Hotel management Application...
in tha For 50 Employees(Consider minimum 40) for 7 weeks
means (Each employee is represented as a strip) so totally 350
strips, each strip height is 25 so 350x25 = 12,250 Approximately i
need this much of height, BCZ client don't want to put scroll on
flash....

How can the content height of an iWeb page be reduced below zero?

In some of my iWeb "Photo" pages, there is a large amount of white space, below the last photos, that I can not reduce. In Inspector/Page/Layout, Content Height is 0 px, but the unwanted bottom white space can be as great as the top space occupied by photos. The problem comes when double-clicking on a photo that resides near the bottom of the page: the new page opens at its TOP, but the enlarged photo can be in the white space at the bottom of the page. Scrolling up is then necessary EACH TIME just to view the enlarged photo.
My question, why is there empty white space at the bottom of my photo pages, and how can I get rid of it?

And it remains a puzzlement!
I followed your suggestions, but nothing changed: there is still excess white space below pictures in some of my albums.
Maybe the reason is that my domain files are not in User/Library/Application Support/iWeb folder. They are in User/Sites, and their are three of them now. When I first started using Web years ago, User/Sites is where domains were found and I had only two of them (my travel photos and the pages for my Mac user group, SMUG.net). Last March I added a third site, but by then iWeb no longer allowed creating more than one domain file. So SMUG and the new site co-existed in the second domain file. Eventually, I duplicated the domain file, deleted the SMUG site from one of the duplicates, and the new site from the other domain file. The result is that I got three domain files.
I don't think having three domain files caused the problem that I am having, as I did not add new photos to my travel domain until late May at the least, when my photos of Portugal were entered. And not all those Portugal photo albums have the excess white space below the pictures.
Do you have other suggestions I might try? As other strange happenings have been occurring now and then in my Mac, I've been considering reinstalling OS 10.6 for a while now.

Spry Accordian panel content height for more than 1 accordian in site

Hi,
I have added a couple of accordians to my website on different pages.
When I adjust the panel content height for 1 it automatically changes it for all of them on my site causing scroll bars to be visible - which I am trying to avoid.
I'm new to Spry coding and am not sure what to change.
Thank you for your help

This is a frequent question, in one form or other. It helps to understand that when you insert a Spry Widget, the associated javascript and CSS files are also added to your site files. And if you insert a second of the same type of Widget, DW checks and sees the original js and css files and does not add a second (or third). This is efficient, and also keeps your styling uniform across all instances of that Widget in your site.
If you want Widgets of the same type styled differently, you need to add to your CSS stylesheet style selectors that focus on those parts you want to be different.
Because Widgets are already ID'd, you can't add a new ID directly to the Widget <div> But you can wrap the Widget in a new div and put an ID on that.
Say you want two accordions on a page, one with panel content height of 100px and one with panel content height of 200px.
ID your accordions' wrapper divs: <div id="normalheight"> and <div id="doubleheight"> (use better descriptive IDs).
In the CSS stylesheet, do this:
.AccordionPanelContent {
    overflow: auto;
    margin: 0px;
    padding: 0px;
    height: auto;
#normalheight .AccordionPanelContent {
     height: 100px;
#doubleheight .AccordionPanelContent {
     height: 200px;
Be sure to add them directly after the given rule for .AccordionPanelContent; you are re-writing the height in that style selector for your two more specific accordions.
Beth

Masked content height is counted!?

I'm building a new full-page flash site and I have a Flash
Scrollbar setup to automatically enable itself when the page
content exceeds the Stage.height. Pretty basic. The problem here is
that I have some components of this website, such as a image
gallery, that uses a "filmstrip" style display to show all of the
thumbnails. Again, basic concept with the clip of the thumbnail
images simply masked. The issue here is that the _height of those
thumbnail clips are included even though the content is masked! So,
if I load enough thumbnails, the masked content eventually gets
long enough to cause the scrollbar to appear even though the
content is masked and technically the scrollbar isn't needed! How
can I stop this _height from being counted? Seems pretty stupid
that the _height of that masked content is being counter. Any ideas
at all? Putting checks into the system for every component with
masked content to offset this problem would be very cumbersome. Any
help is greatly appreciated!
-Jason Kringen
[email protected]

Hey, I think I may have come up with an idea and have started
coding it. I unfortunately have to have the scrollbar pointed at
the very root container becuase this site if a 100% full flash site
that has multiple components/pages that can, at any time, exceed
the stage height and I need that scrollbar to automatically appear
when that happens. What I've started is created a static class
called MaskedContentRegistry that allows any movieclip to define
masked content that it is showing. The MaskedContentRegistry class
keeps a list of all masked content currently being displayed and
determines if in fact the "viewable" content actually exceeds that
stage height or not by calculating the difference between the mask
height and the masked content height, etc. Trying to finish that up
and it seems that that may solve the problem. Thanks again for the
help. :)
-Jason Kringen
[email protected]

Flash Content Height Problem

Hi all,
Just now i faced a Crazy problem....
When The flash content height is Over than 4000 My content is
not displayed correctly ... Say for example, i am having a Strip
with a Dynamic Text not more than that... I am displaying something
in the Strip dynamic text.... Well, i am duplicating the MovieClip
to generate some more clips,,, upto some points it s working
fine(With the same Code no change in the GUI also)
If the _y position exceed 4000 it creates problem, i can able
to view the Dynamic text but not the strips.....
can any one guess what s the problem here

Yes exactly i am talikng about pixel....
Terribily the problem is I can able to View the Dynamic text
in that area but not the Background Vector Rectangle...
I need more than this much of height, bcz i am Developing a
Hotel management Application...
in tha For 50 Employees(Consider minimum 40) for 7 weeks
means (Each employee is represented as a strip) so totally 350
strips, each strip height is 25 so 350x25 = 12,250 Approximately i
need this much of height, BCZ client don't want to put scroll on
flash....

Layout Content Height limitation

Greetings,
I have tried unsuccessfully to increase the layout content height to over 1,000 px, however it seems there is a limitation of approximately 700 px. Does anybody know how to get around this, or am I just missing something?
Thank you - Scott

Scott:
How are you trying to increase the height? Are you using the Inspector/Page/Layout pane?
Click to view full size
You should be able to go far beyond 700 using that method. Unless the theme you're using won't let you. Plain themes have no limitation. What theme are you using?
One method you can try is to create an empty text box and drag it down. That will usually let you increase the page height. Some themes may not appear right if they have a fixed background height and use special files for the background.
OT

Changing Content Height

Does anyone know if iWeb version 1.1.2 has a bug in the Page Inspector - specifically, with the field for setting Content Height? It's the easiest, most bone-headed thing in the world to do but, and I even checked the Help files to make sure I was doing it exactly as I'm supposed to, but the values will not change, no matter what I do or how many times I press Return. I'm an experienced designer and coder so I don't think it's due to plain incompetence... I sure hope not. Am I overlooking something obvious? Does iWeb place limits on page height, but not make that information known or visible? Help... and thanks. Sorry that was long-winded.

ad-hoc wrote:
Does iWeb place limits on page height...?
Welcome to the discussions. Yes — see this old thread:
http://discussions.apple.com/message.jspa?messageID=8080901

Content height

I have been sucessfully using the content height in inspector to adjust the height of my pages. On some occasions it does not work, the numbers go up in the height box but the page does not change, any ideas?

The easiest way to increase your content height quickly is add a text box with your Copyright © notice and drag it down the page.
This notice is usually at the bottom of the page so, anytime you want to lengthen or shorten the page, just click, hold and drag.
To adjust this notice in relation to the bottom of the page, change the "Footer" height.

Maximum Content Mystery

What the...?
Okay, I'm a novice w/ iDVD and seem to have painted myself into a corner. Can someone figure this one out?
I took a 2 hour 30 minute iMovie w/ 23 chapters and dropped it into iDVD. It was (of course) too long/large @ 10GB. In preferences I changed to "Best Quality" and the status meter dropped to around 5GB. Still too large. I reduced the time of the menu and it dropped to around 3GB.
I clicked burn. It took FOREVER. Still, it worked.
But then, I tried to burn a second disc and I received the "Maximum Content Exceeded" error message.
For some reason, the capacity now reads 5 GB and I'm now no longer able to reign it in.
Huh?
What happened and how can I fix it?
Any help is most appreciated.

You really should not have been able to create a DVD of 2hr 30min length. Max length for iDVD, even at Best Quality, is 2 hrs, including menus, drop zones, etc
Check that first DVD you made ... willing to bet you have some probs with it
You can use something like DVD Studio Pro to create a movie longer than two hours ... maybe Toast 7 as well, but don't quote me on that
Your best bet, if you cant trim the 30 minutes away, is to put your movie on 2 DVDs

Accordion in CS3 - content height

I know that changing the appropriate CSS style changes the
height of the first content panel in the Accordion widget.
Setting the height to 'auto' makes the content fit. no
problem.
However, each subsequent content panel is the SAME height as
the first, whatever the amount of content.
How can I change this behaviour so that each panel is
sufficiently hight so that all content fits without
scrolling?

The easiest way to increase your content height quickly is add a text box with your Copyright © notice and drag it down the page.
This notice is usually at the bottom of the page so, anytime you want to lengthen or shorten the page, just click, hold and drag.
To adjust this notice in relation to the bottom of the page, change the "Footer" height.

Cannot burn in iDVD 2008: maximum content problem on small file!!

Hello all,
I am having a very weird problem with iDVD '08. I have a file that is only 15 minutes long that I edited in iMovie. The file is about 840mb, and with the menu and everything, it comes up to about 866 mb. iDVD shows everything as fine, encodes, previews, etc..
However, when I go to burn the DVD, it says "Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window."
In the project info, I have it set as "Best Performance", and that, according to the movie should be ok because the movie is only 15 minutes!!
I have tried everything that I can think of, and it is driving me crazy. I have tried DVD+R, DVD-R, and I have even tried saving the image to the PC, and then burning with Disk Utility.
When I try to burn with Disk Utility (the file is 849mb), it says the DVD does not have enough free space!
Can anyone shed some light on this for me?
Thanks in advance.
Subhash

Hello
I'm having the exact same problem, my file is only 12 minutes @ 424 mb! I'm still trouble shooting as we speak so if anyone hears of a worthy solution please pass it on.
With a file containing only 424mb, space should not not a problem. One problem could be the DVD-RAM recordable disk I'm trying to burn to. I was told it would work.
Could it be that my video comes from my new Oylmpus Stylus 820 camera that the apple dudes said would be great for importing video to imovie then sharing to idvd so I could burn with no problem. hmmm.
Is there some crazy application that I have to download to supplement idvd?
Please help.
Thanks
Zimmerlucky

Project Exceeds maximum content Duration

I have a movie from iMovie that is 106 minutes long. I sent it to iDVD and/or Media Browser. As I place it in iDVD it says the project exceeds the Maximum content duration. It is my understanding that projects can be 2 hours long. The file is only 1.2GB. In iDVD it says the project is 5.85GB for some reason and at 106 minutes it exceeds the duration. Any ideas.

Hi
Yes iDVD doesn't care about GBs at all only duration of movie + menu
and 60 or 120 minutes for SL DVDs
iDVD 08 & 09 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to *120 min*.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies up to *120 min.)* - slightly lower quality than above
Yours Bengt W

Maximum Content Height

Similar Messages

Maybe you are looking for