Maximum Core File Size for Solaris 8

I believe that RLM_INFINITY for Solaris for core file sizes comes to 2GB.
Is there any mechanism ( patch ) etc. by which this can be increasd ?

if your application is 32-bit, then the core file size would be limited to 4GB (by default) and if your application is
64-bit, then the core file size would be limited to usigned long max (by default).
-Saurabh

Similar Messages

Maximum recommended file size for public distribution?

I'm producing a project with multiple PDFs that will be circulated to a goup of seniors aged 70 and older. I anticipate that some may be using older computers.
Most of my PDFs are small, but one at 7.4 MB is at the smallest size I can output the document as it stands. I'm wondering if that size may be too large. If necessary, I can break it into two documents, or maybe even three.
Does anyone with experience producing PDFs for public distribution have a sense of a maximum recommended file size?
I note that at http://www.irs.gov/pub/irs-pdf/ the Internal Revenue Service hosts 2,012 PDFs, of which only 50 are 4 MB or larger.
Thanks!

First Open the PDF Use Optimizer to examine the PDF.
a Lot of times when I create PDF's I end up with a half-dozen copies of the same font and fontfaces. If you remove all the duplicates that will reduce the file size tremendously.
Another thing is to reduce the dpi of any Graphicseven for printing they don't need to be any larger than 200DPI.
and if they are going to be viewed on acomputer screen only no more than 150 DPI tops and if you can get by with 75DPI that will be even better.
Once you set up the optimized File save under a different name and see what size it turns out. Those to thing s can sometimes reduce file size by as much as 2/3's.

Maximum attachment file size for email account

hi what is the maximum file/s attachment size for email accounts .com and where do I find the means to adjust/ change the setting? thanks Brewsta

Our BigPond mail attachment limit is 10MB. This is the user guide for our BigPond email service:
https://my.bigpond.com/res/pdf/premiummail/installation_user_guide.pdf

Maximum PDF file size for browsers to cache?

My site distributes daily newsletters via PDF that are typically about 2MB in size. A link is provided to the PDF, and when clicked, it opens the Adobe Reader plugin within the browser (Firefox, IE) and opens the file therein.
Recently it was brought to my attention by a dialup user (they do still exist) that when he navigates back or forward in his browser's history, the PDF has to be redownloaded rather than reloaded from his browser's cache. I, with a broadband connection and some wonderful Firefox extensions (Firefox Throttle and Live HTTP Headers) confirmed this behavior.
However, a similarly sized file (2MB) of a different type (text) is cached by the browser and I can go back and forth in the history without the file having to be redownloaded. I also had success with a smaller sized PDF (70kb).
What appears to happen is this:
1) Click the link to the 2MB PDF, and it loads in the browser.
2) Click browser's back button to back to previous page in browser history.
3) Click forward button to return to PDF.
4) A request with a "Range: <byte range>" header is sent which I think requests part of the PDF file (the byte ranges).
5) The server responds with a "206 Partial Content" response code and resends some/most/all of the PDF to the browser.
What should happen (and does with other file types and smaller sized PDFs) is that the browser should make a simple request for the PDF file, and assuming the PDF hasn't been modified since the latest request for it, the server should send a "304 Not Modified" response code which instructs the browser to use what it has in cache.
I've increased my browser cache sizes dramatically to no avail. Cleared them before starting the process to no avail. Should be no problem with any browser's cache limit.
I'm using Firefox 2 and IE7. My co-worker has IE6 and Acrobat Reader 6 installed on another machine and it works fine there (PDF is cached and does not need to be redownloaded).
Help! Why aren't these larger PDF files being cached correctly, and what can we do to get them saved in the cache so our poor dialup users don't have to redownload them everytime they navigate their browser history?
Thanks!

Just wanted to reply with my discovery and fix. I'm not sure if it is Adobe Reader or the web browsers (I tested Firefox 2 and IE7), but they appear to request parts of large PDF files "on demand." That is, they send requests to the web server with a "Range: <byte range(s)>" header which instructs the web server to only send segments of the file. I think they use the feature of HTTP 1.1 that keeps the connection open or alive to request/send the data incrementally. While this might seem preferrable, in the case of dialup users that navigate through their browser(s) history, they should instead download the PDF in its entirety and allow the browser to cache the file. This way, when they click the link to open the PDF again (or go back/forward in their browser's history), they use what they have in their cache instead of redownloading the PDF (which in the case of dialup users is quite painful). We fixed the problem by instructing our web server to ignore/disregard byte range requests. In a nutshell, you need to have the web server issue a header: Accept-Ranges: none In Apache, you can do this on a per-file-type basis using a FilesMatch directive. In IIS (we're using 5.0), you cannot specify a file type for this behavior; you have to set it in Internet Services Manager by adding a custom header under the "HTTP Headers" tab. Personally, I prefer folks use their browser cache than repeatedly request data (PDF file in this case) from our server. To each his own I guess. Hope this helps someone.

Maximum import file size for stills?

I am getting an error importing stills that are large, about 6000 pixels wide. I wanted to zoom into the image in my 1920x1200 video... Couldn't find info on max image size... anyone know?
thanks...

Studio3D,
I do a fair amount of work with stills in Premiere. I always plan the size necessary for the pans and re-size to exactly what is required, based on the Project's image dimensions. As I do not do any "random pans and zooms," (each is choreographed tightly) I do all of the re-sizing work in PS, before Import. However, with your hi-rez Project, you might well be pushing the limiting size in Premiere. You may have to step back, just a little, and tighten your pans to accommodate these limits.
Good luck,
Hunt
PS I like the re-sizing algorithms in PS better than any I have worked with in PrP. Have not experimented with CS4, so I might change my tune, should they have changed their algorithms.

What is an idea of maximum file size for a film in Captivate?

Hi there,
I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
Thanks in advance

Probably better guidelines that dictates 'size' of a vi are:
typically no more than 1 video screen in size
is it legible
and is it's function and operation clear.
I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Maximum file size for export into MP4?

Hello,
I am not able to export 2 hour HD video into standard MP4 file. It seems that reaching 100% export algorithm gets into loop. I was waiting for hours and still had seen progress at exactly 100% with final file size on hard disk to be 0 bytes. I am using CS5 on MAC OS X. I had to split my timeline to 2 parts and to export them separately (which is embarrasing). Is there something like maximum file size for export? I guess that 2h video would have about 25-35GB.
Thank you
jiri

You are right.
So I am running AP Pro 5.0.4, Adobe Media Encoder 5.0.1.0 (64bit). Operating system Mac OS X ver 10.7.3. All applications are up to date.
MacBook Pro Intel i5 2.53GB, 8GB RAM, nVidia GT 330M 256 MB, 500GB HDD
Video is 1920x1080 (AVCHD) 25fps in a .MTS container (major part of timeline), 1280x720 30fps in .MOV container (2mins), Still images 4000x3000 in .JPG
No error message is generated during export - everything finishes without any problem...just file created has 0 byte size (as described above).
This is my largest video project (1h 54min) I dont have any other problem with other projects.
I dont run any other special software, at the moment of export all usual applications are closed so that MacBook "power" can go to Media Encoder. No codecs installed, using VLC Player or Quick Time.
Attached please find printscreen from Export settings (AP Pro). Writing this ppost I tried to export only the first 4mins from timeline where all kind of media is used...and it was OK.
As a next step I will try to export (same settings) 1h 30mins as I still believe problem comes with length of video exported.
Let me know your opinion

Maximum file size for importing into Premiere Pro CS6

Hi,
I'm considering recording raw video, no compression at 720p, 30 fps for 20-30 min. This woudl result in a file that is close to 80 Gbytes. I'm wondering what the maximum file size for importing into premiere Pro is and if I need to split this file up into smaller pieces. Any recommendations on how I may deal with uncompressed raw video that is pretty long in length?
Thanks,
Serena

There is bound to be some limit somewhere in the program, but you should be well below that. The biggest issue might be whether your computer is up to the task of handling it. If you will post your computer specs., someone will give you comments on that aspect.
Good luck,
Hunt

Please can you tell me the default maximum file size for an attachment in Case Management v12 ?

Hi,
Please can you tell me the default maximum file size for an attachment in Case Management v12+? I am able to define a maximum attachment size but I am not able to see what the default is set to.
Thank you
Regards,
Anthony

Hi,
The default max attachment size is 8MB.
Regards.
Mike

Maximum input payload size(for an XML file) supported by OSB

Hey Everyone,
I wanted to know, what is the maximum payload size that OSB can handle.
The requirement is to pass XML files as input to OSB and insert the data of the XML files in the oracle staging tables. The OSB will host all the .jca,wsdl, xml, xml schema and other files required to perform the operation.
The hurdle is to understand, what is the maximum XML file size limit, that OSB can allow to pass through without breaking.
I did some test runs and got the following output,
Size of the XML file: OSB successfully read a file of size, 3176kb but failed for a file of size 3922kb, so the OSB breakpoint occurs somewhere between 3-4 MB, as per the test runs.
Range of number of Lines of XML: 102995 to 126787, since OSB was able to consume a file with lines (102995) and size 3176kb but broke for a file with number of lines (126787) and size 3922kb.
Request to please share your views on the test runs regarding the OSB breakpoint and also kindly share the results, if the same test has been performed at your end.
Thank you very much.

Hey Everyone,
I wanted to know, what is the maximum payload size that OSB can handle.
The requirement is to pass XML files as input to OSB and insert the data of the XML files in the oracle staging tables. The OSB will host all the .jca,wsdl, xml, xml schema and other files required to perform the operation.
The hurdle is to understand, what is the maximum XML file size limit, that OSB can allow to pass through without breaking.
I did some test runs and got the following output,
Size of the XML file: OSB successfully read a file of size, 3176kb but failed for a file of size 3922kb, so the OSB breakpoint occurs somewhere between 3-4 MB, as per the test runs.
Range of number of Lines of XML: 102995 to 126787, since OSB was able to consume a file with lines (102995) and size 3176kb but broke for a file with number of lines (126787) and size 3922kb.
Request to please share your views on the test runs regarding the OSB breakpoint and also kindly share the results, if the same test has been performed at your end.
Thank you very much.

Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hello,
I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
I've been receiving these errors at boot;
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 11/10/2009 7:51:03 AM
Event ID: 4
Task Category: Logging
Level: Warning
Keywords: Session
User: SYSTEM
Computer: herbt-PC
Description:
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
 <EventID>4</EventID>
 <Version>0</Version>
 <Level>3</Level>
 <Task>1</Task>
 <Opcode>10</Opcode>
 <Keywords>0x8000000000000010</Keywords>
 <TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
 <EventRecordID>28</EventRecordID>
 <Correlation />
 <Execution ProcessID="4" ThreadID="164" />
 <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
 <Computer>herbt-PC</Computer>
 <Security UserID="S-1-5-18" />
</System>
<EventData>
 <Data Name="SessionName">ReadyBoot</Data>
 <Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
 <Data Name="ErrorCode">3221225864</Data>
 <Data Name="LoggingMode">0</Data>
 <Data Name="MaxFileSize">20971520</Data>
</EventData>
</Event>
The image for PID 4 is listed as System.
My searches have turned up similar events listed but no solutions.
Any help would be appreciated.
Cheers!

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
As suggested above I assume this is a microsoft issue? It has been discussed here and other forums for quite some time. I never have seen a fix? I wish when we received errors of this nature microsoft would tell us what they were. How is this related to superfetch? What is superfetch? Why would superfetch have changed?
BY THE WAY.... Superfetch is on(started) is on automatic and logs on as local system. So this is not the cause of my issue. Also what is readyboot? Does the average computer really know what these programs/services or unique microsoft words/terms are?
System
Provider
[ Name]
Microsoft-Windows-Kernel-EventTracing
[ Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
[ SystemTime]
2010-04-11T14:35:49.829600000Z
EventRecordID
25
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
48
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
Daddy-PC
Security
[ UserID]
S-1-5-18
EventData
SessionName
Circular Kernel Context Logger
FileName
ErrorCode
3221225525
LoggingMode
268436608
Windows7, Windows, Win7

Maximum Data file size in 10g,11g

DB Versions:10g, 11g
OS & versions: Aix 6.1, Sun OS 5.9, Solaris 10
This is what Oracle 11g Documentation
http://download.oracle.com/docs/cd/B28359_01/server.111/b28320/limits002.htm
says about the Maximum Data file size
Operating system dependent. Limited by maximum operating system file size;typically 2^22 or 4 MB blocksI don't understand what this 2^22 thing is.
In our AIX machine and ulimit command show
$ ulimit -a
time(seconds) unlimited
file(blocks) unlimited <-------------------------------------------
data(kbytes) unlimited
stack(kbytes) 4194304
memory(kbytes) unlimited
coredump(blocks) unlimited
nofiles(descriptors) unlimited
threads(per process) unlimited
processes(per user) unlimitedSo, this means, In AIX that both the OS and Oracle can create a data file of any Size. Right?
What about 10g, 11g DBs running on Sun OS 5.9 and Solaris 10 ? Is there any Limit on the data file size?

How do i determine maximum number of blocks for an OS?df -g would give you the block size. OS blocksize is 512 bytes on AIX.
Lets say the db_block_size is 8k. What would the maximum file size for data file in Small File tablespace and Big File tablespace be?Smallfile (traditional) Tablespaces - A smallfile tablespace is a traditional Oracle tablespace, which can contain 1022 datafiles or tempfiles, each of which can contain up to approximately 4 million (222) blocks. - 32G
A bigfile tablespace contains only one datafile or tempfile, which can contain up to approximately 4 billion ( 232 ) blocks. The maximum size of the single datafile or tempfile is 128 terabytes (TB) for a tablespace with 32K blocks and 32TB for a tablespace with 8K blocks.
HTH
-Anantha

Sql loader maximum data file size..?

Hi - I wrote sql loader script runs through shell script which will import data into table from CSV file. CSV file size is around 700MB. I am using Oracle 10g with Sun Solaris 5 environment.
My question is, is there any maximum data file size. The following code from my shell script.
SQLLDR=
DB_USER=
DB_PASS=
DB_SID=
controlFile=
dataFile=
logFileName=
badFile=
${SQLLDR} userid=$DB_USER"/"$DB_PASS"@"$DB_SID \
 control=$controlFile \
 data=$dataFile \
 log=$logFileName \
 bad=$badFile \
 direct=true \
 silent=all \
 errors=5000Here is my control file code
LOAD DATA
APPEND
INTO TABLE KEY_HISTORY_TBL
WHEN OLD_KEY <> ''
AND NEW_KEY <> ''
FIELDS TERMINATED BY ','
TRAILING NULLCOLS
 OLD_KEY "LTRIM(RTRIM(:OLD_KEY))",
 NEW_KEY "LTRIM(RTRIM(:NEW_KEY))",
 SYS_DATE "SYSTIMESTAMP",
 STATUS CONSTANT 'C'
)Thanks,
-Soma
Edited by: user4587490 on Jun 15, 2011 10:17 AM
Edited by: user4587490 on Jun 15, 2011 11:16 AM

Hello Soma.
How many records exist in your 700 MB CSV file? How many do you expect to process in 10 minutes? You may want to consider performing a set of simple unit tests with 1) 1 record, 2) 1,000 records, 3) 100 MB filesize, etc. to #1 validate that your shell script and control file syntax function as expected (including the writing of log files, etc.), and #2 gauge how long the processing will take for the full file.
Hope this helps,
Luke
Please mark the answer as helpful or answered if it is so. If not, provide additional details.
Always try to provide actual or sample statements and the full text of errors along with error code to help the forum members help you better.

How to increase file size on solaris 10 from 2g

HI All,
how can i increase the file size on solaris 10 from 2gb .
please reply complete steps.
or any helpful tutorials
thanks

files (log files ) are being created by application and max size for the files is "2147483647" and that restriction i cant get complete logs so how can i increase the file size ?
Q) What filesystem are you using?
A) UFS
Q) What Kernel release are you using? (uname -a)
A) SunOS ss00 5.10 Generic_120012-14 i86pc i386 i86pc
Q) What system are you running Solaris on? (prtdiag -v | head)
A) System Configuration: Sun Microsystems Sun Fire V20z
BIOS Configuration: Phoenix Technologies Ltd. V1.34.4.2 08/24/2005
BMC Configuration: IPMI 1.5 (KCS: Keyboard Controller Style)
==== Processor Sockets ====================================
Version Location Tag
AMD CPU0-Socket 940
AMD CPU1-Socket 940
Q) Are you running a 32-bit or 64-bit Kernel? (isainfo -v)
A) 64-bit amd64 applications
sse2 sse fxsr amd_3dnowx amd_3dnow amd_mmx mmx cmov amd_sysc cx8 tsc
fpu
32-bit i386 applications
sse2 sse fxsr amd_3dnowx amd_3dnow amd_mmx mmx cmov amd_sysc cx8 tsc
fpu
Q) How is the file being modified or created?
A) files are being created by application
Can you create a 3GB file using mkfile(1M) - # mkfile 3g 3gfile
A) 3221225472 Jun 8 05:31 3gfile yes file was created successfully

Maximum bitrate and size for Apple TV3

Hello,
how much is maximum bitrate and file size for Apple TV3 homesharing? I transfared some bluray, but it lags. Im streaming via cabble.

No official answer on this but specs say:
Video Formats
H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
AppleTV 2/3 have less than 8GB of memory to buffer movies but there are movies over 8GB and I've certainly streamed larger than that.
What lags? Playback? Stuttery display?

Maximum Core File Size for Solaris 8

Similar Messages

Maybe you are looking for