Maximum count of messages, and average/Max size of the messages for a retry
I like to know what will be the maximum count of messages, Average/Max size of the messages that a retry queue can handle andhow it’s is handled in OSB/Admin console and also the CPU and other Infra Structure requirements to support this scenario
The below link has some explanations but not a detailed one
Max file size OSB 11g can process
Similar Messages
-
Trying to open Aperture, but I get the message, "There was an error opening the database for the library “/Users/davewasson/Pictures/Aperture Library.aplibrary”. - and it forces me to quit. What do I do?
Dave-
You can try opening the old (problem) library by launching Aperture into Library First Aid mode and choosing to Repair (first option) or Rebuild the library. Before doing this, make a backup copy of the old library, since both Repair or Rebuild will write changes to the library database.
Repair is the faster and less drastic option, so try that first: After backing up your library, hold down both the Option and Command keys while dragging and dropping the problem library on the Aperture icon. The Photo Library First Aid window appears. Select Repair Database, then click Repair. After some time Aperture should open the library, if possible.
If that fails launch Aperture back into Library First Aid and select Rebuild Database. Depending on the size of your library this operation could take some time, up to several hours for a very large library. When the main window appears you may have some extra Recovered folders/projects. This operation rebuilds the library from scratch and is usually successful at reviving problem libraries. -
I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!
Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection. -
I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server" cannot understand why this is happening and have not been able to fix. Now when I try to send pictues even to another email address I am getting the same message.
Help.Email may not be the best way to move pictures.
There are lots of ways of moving files.
A simple and popular way to copy files and share files among your devices.
https://www.dropbox.com/
"Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
https://www.box.com/
Using iTunes to transfer files:
http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares) protocols"
https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
Windows File server
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
"The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance." " Includes choice of private cloud on-premise."
http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11 -
I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help
What I recommend you try doing first is to turn iMessage off then back on. If that doesn't work, make sure that your Apple ID and password are correct. If everything seems correct and you still can't send out messages using iMessage instead of text message, I think you should either try calling AppleCare at 1-800-MY-IPHONE (1-800-694-7466) and/or scheduling an appointment at the Genius Bar at an Apple Store (that is, if there's one close to you).
Hope this helps! -
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
Hi,
I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
Has any other user had such a problem, and if so, how did they rectify it.
Any advice would be greatly appreciated.
Thanks in advance.
clarinet99Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up -
I get "an error has occurred in the script on this page" it comes up for no reason on Firefox and I can't remove the message, it then goes away on it's own after 3 minutes? how do I prevent this message coming up? I have Windows 7.
I can work the screen behind the message which stays in the centre of my screen.Windows version is...?
What pages are giving you problems? [post links to same]
Are you getting the script errors only when attempting to print or...?
Has your printer's manufacturer confirmed that your currently installed printer software is IE11-compatible (yet)?
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft -
I just paid for a TV series on my iPad and after watching 1 episode the message appeared This device is already associated with an Apple ID
Hello there, rickfrombeverley hills.
The following Knowledge Base article provides information on how to report the issue you're having with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?
ayrosa wrote:
I still have an iPad 1, and need to update to iOS 7
Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1 -
I just rented 2 movies on my Apple TV and now I am getting the message, "Your Apple TV is not authorized to play this content". Now I have 2 Apple TV's and they both are saying the same thing. Yes, I have done reset, restore, etc. but nothing! Frustrated & out $10.
Apple TV (3rd generation), OS X Mountain Lion (10.8.3), 2 Apple TV's (3rd Generation).Good call!! Thanks a million. Glad I asked & thanks for the quick response. I was getting frustrated. Thanks again!!!!!
-
I just rented 2 movies on my Apple TV and now I am getting the message, "Your Apple TV is not authorized to play this content". Now I have 2 Apple TV's and they both are saying the same thing. Yes, I have done reset, restore, etc. but nothing! Frustrated & out $10.
Good call!! Thanks a million. Glad I asked & thanks for the quick response. I was getting frustrated. Thanks again!!!!!
-
Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!
Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.
-
Hi
I have my Dad's apple ID etc, but he has an iphone and i have an Ipod Touch then on IMessage i can read all the messages he recieves and sends and he can read all the messages i send and recieve how do i stop this? But i still want to send messages to him.
Thank You. You do not need a seperate Apple ID. One one device you just need to go to Settings>Messages and add another/different Messaging email address and delete the common Apple ID address. Also see:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime -
I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the “saved” ones before I write the new one. What to do to finally/definitely delete the save message?
sorry it's ios6
Maybe you are looking for
-
This message keeps appearing on my google home page no matter which upgrade is installed. this has occured for the last three upgrades. It also affects youtube and hotmail which keep telling me my browser is outdated even though I have just installed
-
I can log into OTN just fine. When I try to download something (Oracle Application Express) and I click on accept, I'm prompted for the userid/login box. Even though, I'm already logged in. My userid/password that I used a to get in now fails. I've b
-
After upgrading to the latest IOS version 7.1, in mail on ipad, if I select more than 5 mail items to delete the mail software package crashes and I have to relaunch mail? Anyone else noticed this?
-
Page Attribute HTML Header on Page 0
Why is there no HTML Header section on Page 0? Seems that this would be an ideal place to define my page stlye to apply to all pages. I'm trying to increase the font-size to 14 for all my pages. Instead of doing it on each page, I thought it would mo
-
Packaging EJB's in J2EE Tutorial...
There is a discrepancy between the docs in the J2EE tutorial and the DeployTool interface that is making it hard for me to figure out how to get the sample converter EJB successfully deployed. The docs in the new SDK v. 1.3.2 references single Home a