Maximum Digits for Extension in Callmanager 4.X

What's the official maximum number of digits for extensions in CM 4.x? The error message says it's 24 and I got this information that it is supposed to support 32.

I doubt this has changed much, if at all, from 4x. If you look at the Data Dictionary for 7x, it provides the following:
DN
This field is a directory number. This is currently defined as a variable length string of max length 23.
So, max length of 23.
Hailey
Please rate helpful posts!

Similar Messages

What's the maximum digital I/O frequency for the NI LabVIEW RIO Evaluation Kit ?

Hi!
I'm trying to analyze some sort of sine signal at the frequency of about 3 MHz. Because the analysis should be very precise and fast (about 10 samples per period), I'm needing the maximum digital I/O frequency of the NI LabVIEW RIO Evaluation Kit.
Regards,
Erik

Dracyon,
Can you please clarify a couple of things: you say you are trying to acquire a sine wave that has a frequency of 3 MHz, but you are asking for the maximum DIO frequency. I believe what you need to know is the maximum analog sampling frequency. For the sbRIO-9636 (part of the evaluation kit), the maximum aggregate sampling frequency is 200 kS/s at 16 bits of resolution. At 10 samples per period, you could sample a ~20k analog signal. If you are actually looking for maximum DIO frequency, this is a bit more complicated. We have a good whitepaper explaining this.
Best,
Tannerite
National Instruments

I want to set a maximum size for pictures when FF shows websites. How can i do that? NO I DONT MEAN "HOW TO ZOOM".

I have FF 34 but this problem has been there for a lot of earlier versions. On many webpages there are pictures that cover my whole screen, and I want to set maximum size for showing images on webpages.
I ONLY wanr to change the maximum size of the images, AND IAM NOT asking about how to zoom the webpage.

Do you want to hide large images or merely make them smaller by setting a max-width and max-height?
You would probably have to use JavaScript (bookmarklet) to achieve this reliably.
There are bookmarklets to make large images fit in the window to avoid a horizontal scroll bar
You can try this code in the userContent.css file (adjust the max-width accordingly).
*http://kb.mozillazine.org/userContent.css
<pre><nowiki>img { max-width: 1024px !important; height: auto !important; }</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
*Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
*Use a plain text editor like Notepad to create a (new) userContent.css file in the chrome folder (file name is case sensitive)
*Paste the code in the userContent.css file in the editor window
*Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userContent.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userContent.css.txt file

Is there a maximum size for photos used in a slideshow? I cannot anymore put my slideshow into a wmv

Is there a maximum size for photos imported in a slideshow ? I cannot anymore put my slide show into a wmv file.

About CLOB size, it's 4Go not 4000 characters - VARCHAR2 supports up to 4000 bytes. Pay attention also to unicode encoding!
Are you using CFQUERYPARAM to insert into the CLOB fields ?
<CFQUERYPARAM CFSQLTYPE="CF_SQL_CLOB" VALUE=" ">
use the Firebug extension (https://addons.mozilla.org/en-US/firefox/addon/1843) in Firefox3 and do some network monitoring: let me know what you're seeing there.
Hope it will help...

Extension Manager CS5 does not show Digital Publishing extension...

... even though the extension is installed for InDesign CS5 and operating normally.
I've tried trashing the EM prefs file but that doesn't seem to make a difference.
Have reinstalled extension several times.
Any insights are appreciated!

Digital Publishing extension has its own installer, it is not a ZXP or MXP extension. Extension Manager cannot manage it.
Extension Manager preference file only records the size and position of window, which product and extension are selected when exiting EM last time. It has nothing to do with displaying this extension or not.

I have been using the Adobe Digital for years. All of a sudden, I am unable to complete a download

I have been using Adobe Digital for years. All of a sudden , I am unable to complete a download from my library to the Adobe Digital. Can anyone help?

Has anything happened like an update to Digital Editions?
Two possibilities come to mind:
between them they are the answer to a large number of ADE problems, but I can't promise they will help in your case.
Also, a third possibility at the bottom.
1) ~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
2) ~~~~~~~~~
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
3) ~~~~~~~~~~
extension of (2). ADE2.0 will often not work with Overdrive library books if a Sony eReader is plugged in.
It isn't just that it won't interact with the Sony, it won't even operate properly on the book within ADE on the computer.

Set Maximum size for a subpanel created with splitter bars in LV8

Does anyone know how to set the Maximum size for a subpanel created with asplitter bar? If I show one cluster in the subpanel and use the scroll bar to scroll, I can see more (blank) area than I want. I just want the user to be able to scroll a cluster within a subpanel while the cluster is larger than the view area of the subpanel. I don't want to let the user scroll outside the cluster.
Ravi Beniwal

I apologize for the mixup in terminology. Please read Pane wherever the word Subpanel was used.
Please see the attached VI for a description of my problem.
I would really appreciate any help with this.
Ravi Beniwal
Attachments:
Pane Scrolling Problem.vi ‏10 KB

Updating Azure Svc Mgmnt for Extensions

Greetings! We are getting the following error on one of our Web Roles:
DiagnosticsPlugin.exe Information: 0 : [3/18/2015 7:39:07 PM] Decrypting private configuration
DiagnosticsPlugin.exe Warning: 0 : [3/18/2015 7:39:07 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:<thumbprint>
At which point the Diagnostics extension is unable to initialize. I have verified that this certificate exists in Azure and is associated with this specific role. I have checked in the certificate management console and we do not see the certificate
being installed on the instance. Upon reviewing AppAgentRuntime.log on the instance, we can see that our SSL certificate and Remote Desktop certificate are being deployed, but not the service management certificate.
I have compared these logs with the logs from a working instance in order to verify what I should be seeing.
At this point, I have determined that we have one of two options:
Re-upload the Azure Service Management for Extensions into our environment.
Create a new Service Management certificate, upload it, and configure our role to use this certificate when decrypting the PrivateConfig for our instances.
We run into the following problems, however:
I cannot download the existing Service Management certificate as it was auto-generated by Azure. I can pull down the public certificate, but not the full certificate in order to re-upload it.
Having reviewed all of the PowerShell commands, Visual Studio options, and Management interface, I cannot see how to update the configuration for Azure such that a different certificate is used to encrypt the private config and is used to decrypt the same.
We have tried disabling and re-enabling diagnostics on our role -- both via Visual Studio and PowerShell. We have also attempted restarting our instances after making diagnostics changes -- to no effect.
Any help would be appreciated!
Thanks,
Bobby D

Hi,
Thank you for reaching out to us. Let me engage this post with someone who is more familiar with the topic. We shall revert back to you with an update at the earliest. Sincerely appreciate your patience.
Regards,
Prasant

Problem setting maximum characters for a date field.

Good morning all. I am trying to ensure that a date field on the form I am working on validates if the entry is not more than 8 digits, and if it is more, it should display a message, and return the focus back to the field until it is correct. Below is the code I wrote but it is not working:
if(DATE1.length>"8"){
    xfa.host.messageBox(Enter eight digits for the date in the format YYYYMMDD or use the drop down calendar.);
xfa.host.setFocus("form1.Page1.DATE1");
I do not know why it is not working, i need help. I have this code on the exit event.
Thanks
v/r
Tammy

Well you are missing the " around the text in your messagebox but even then it doesn't seem to work. I am not a javascript expert so am not sure why but it works in formcalc like this:
if(Len($) > 8) then
    xfa.host.messageBox("Enter eight digits for the date in the format YYYYMMDD or use the drop down calendar.")
    xfa.host.setFocus("$")
endif

Maximum resolution for external monitor on a B570e

hi,
i've just bought a Lenovo B570e in which i've plugged a Philips 221 V. That has a nominal resolution of 1920 x 1080.
However, when I try and setup its resolution, whether it's through the native windows graphic manager or the intel graphic manager, to 1920 x 1080, nothing is displayed. I need to lower the resolution down to 1680 x 1050 in order for the lenovo to display anything on the external monitor.
am i missing something, or is 1680 x 1050 the maximum resolution for dual display?
thank you
J.

thanks for the help.

Maximum size for an HttpRequest? Set Content-Length?

Hi, I'm managing to get small strings sent from my applet to my servlet, but when I try anything bigger, I get problems. Oddly enough, the larger object can get sent to my applet from my servlet without any issues.
Can anyone tell me if there is a maximum size for sending responses?
Or, if I have to set the content-length property in my applet before I send my data, how do I get the size of my object so I can set it?
thanks for any advice any of you might have

Thanks for the pointers.
BalusC, at first I was trying to write my object without sending it through a byteStream first (hence the q) :), tried it that way too and wouldn't work.
I finally figured out that it wasn't the code that was the problem, but it was an upload issue (server specific). Have changed the code to sending one line of data at a time since I was converting my object to an output file in the servlet anyway. Not the best solution but it works :)
Thanks again

Hi, My places.sqlite file size is 30,720 KB have I reached the maximum size, is there even a maximum size for this. Visited links are no longer changing color.

Hi,
My places.sqlite file size is 30,720 KB have I reached the maximum size, is there even a maximum size for this.
Suddenly the visited links are no longer changing font color, as I am preparing for an exam I need visited questions to change color, to keep track of questions that I have finished. But if I delete a few days of history then again,a few more visited links change color then again it stops, so it seems something is getting full and not able to accommodate any more? Why are my visited links no longer changing color after a certain number of visits? I do have a back up of the places.sqlite file. So I have tried everything from deleting the profile, uninstalling reinstalling, creating a new profile, then copy pasting places.sqlite etc, but as mentioned after a few visits, visited links no longer change color, if I delete a few days of history then again a few visits will again change color and then stop again, so what should I increase so that my visited links quota is increased, I have also tried tweaking about:config and it has had no result. Although I was not really confident that increasing brower.history_max _pages (don't remember exact name, but I am sure you get the idea) is going to help.
Seems as though my visited links change color, quota is full and only if I delete a few days of history will I get a few more visited links to change color. Can somebody shed some light? As mentioned my places.sqlite file size is 30,720 KB so I think perhaps this has something to do with this? Would really appreciate if someone could help. Thank you.

There is no maximum for the places.sqlite database and other SQLite database files like I wrote above. 
All SQLite database file have fixed minimum sizes and if they run out of space they are automatically increased in size with a specific chunk size. For places.sqlite this is 10 MB for the minimum and for the chunk.
*Bug 581606 - Avoid sqlite fragmentation via SQLITE_FCNTL_CHUNK_SIZE

ALBPM 6.0 : The maximum size for file uploads has been exceeded.

Hi,
I use AquaLogic BPM Entreprise server to deploy my Process. When I try to publish a process on my server I get the following error:
An unexpected error ocurred.
The error's technical description is:
"javax.servlet.jsp.JspException: null"
Possible causes are:
The maximum size for file uploads has been exceeded.
If you are trying to publish an exported project you should publish it using the remote project option.
If you are trying to upload the participant's photo you should choose a smaller one.
An internal error has ocurred, please contact support attaching this page's source code.
Has someone resolve it?
Thank's.

Hi,
Sure you've figured this out by now, but when you get the "Maximum size for file uploads" error during publish consider:
1. if your export project file is over 10mb, use "Remote Project" (instead of "Exported Project") as the publication source. That way when you select the remote project, you will point to ".fpr" directory of the project you are trying to publish.
Most times your project is not on a network drive that the server has access to. If this is the case, upload the .exp file to the machine where the Process Administrator is running, then expand it in any directory (just unzip the file). Then, from the Process Administrator, use the option to publish a Remote Project by entering the path to the .fpr directory you just created when unzipping the project.
2. Check to see if you have cataloged any jars and marked them as non-versionable. Most of the times the project size is big just because of the external jar files. So as a best practice, when you do a project export select the option "include only-versionable jars", that will get reduce the project size considerably (usually to Kb's). Of course you have to manually copy the Jar files to your Ext folder.
hth,
Dan

Is there a maximum size for an internal hard disk ?

I just bought an 2.5" 160 Gb HD to replace my internal 120 Gb. Presently I only tried to mount it as an external disk, but it is recognized as a 128 Gb disk, not a 160 Gb. As it is a pain to change the internal HD, I would like to be sure the disk will be recognized as a 160 Gb before. I called Apple hot line, but they have no information, for them the maximum capacity for a Powerbook G4 12" is 80 Gb as it was never offered a larger size, but already I have a 120 Gb that I mounted myself perfectly working.
Is there a software / firmware limitation of the addressable size of a hard disk on a PowerBook G4 12" ???

I have called Apple several times, I have talked to the Apple Store in KC. Same answer...well it comes in 40-60-80 configs. Not a good answer.
The 12 inch powerbook G4 supports ATA-100 (100Mb/sec) interface. The specs on the Hitachi HD refer to ATA-6, which refers to the higher speed transfer rate of UDMA6.
As I understand the ATA (AT Attachment),PATA (Parrallel ATA), IDE (Integrated Drive Electronics) and UDMA (Ultra Direct Memory Access) are basically used interchangeably to describe the interface (see wikopedia for detail difference of implementation of specs).
Since the Mac OS supports terabystes of HD data, the OS is not a limitation. The limitation is in the motherboard interface and controller for ATA (ATA-100)
The ATA specification is 28-bit addressing with a maximum capacity to address of 137gb - 128gb formated. It is calculated as follows. A bit is either on or off meaning it is binary - or in mathmatical terms base of 2.
2 to the 28th power = 268,435,456 disk sectors to address.
Each sector has blocks of 512 bytes.
268,435,456 * 512 = 137,438,953,472 or 137GB
Once formated the drive capacity for data is 128GB.
This is the same issue as the W98 PCs. An indication Apple is way behind in technology for HD interface and controllers. Very sad!
Now the part I do not understand ATA-6 introduced 48 bit addressing, increasing the limit to 128 PiB (or 144 petabytes). This is much larger than 128GB standard ATA. My assumption here is the Hitachi HD supports ATA-6 however Apple does not support more than standard ATA on the motherboard HD interface and controller. The G4 HD controller I assume does not support Ultra DMA mode 5 compliant (UDMA5). This would mean it does not support the 80-connector cables, only the older 40-connector cables.
Does anyone know if this powerbook supports ATA-100,UDMA5, 80-connector cables?

Is there a maximum size for iTunes library

Is there a maximum size for the iTunes libary for windows 7?

Not as far as I know.
My Music Library has 17080 songs (108.38 GB) in it, plus films, Podcasts and a few iTunes U programmes, and I am aware of others using this forum who have larger libraries than I do.

Maximum Digits for Extension in Callmanager 4.X

Similar Messages

Maybe you are looking for