Maximum Duration in Minutes Room Booking - Exchange 2010 sp3

I have setup one room mailbox. Under resource policy > Maximum Duration Minutes I typed 120 minutes. This setting seems to take no affect. I am able to book meetings in this room for longer than 2 hours.
thank you in adv,

Hi,
Does this issue occur on Outlook, OWA or both?
About "Also noticed it can let me book double meetings and don't get no warning email from the Room mailbox",
I suggest configure Maximum conflict instances for testing.
Maximum conflict instances Use this box to specify the maximum number of conflicts allowed for recurring meetings. If the number of instances for a recurring meeting in conflict exceeds this number, the recurring
meeting request is declined.
More details in the following link:
http://technet.microsoft.com/en-us/library/bb124255(v=exchg.141).aspx
Please correct me if there is any misunderstanding.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

Exchange 2010 SP3 upgrade - Event ID 4999 - Address Book Crash

0
I just upgraded an Exchange 2010 SP1 CAS server to SP3 - since then anytime an outlook client connects to the CAS server, the Address Book service crash's and event 4999 is logged in App log. I can reproduce the issue by attempting to create a new
outlook profile and checking the name against the CAS server. This crash's the service and the client recieves an error message. The contents of event ID 4999 is below. I've tried re-installing the CAS role, re-applying the schema extension
for SP3. I've installed all windows updates, enabled logging but I'm not getting anywhere. If anyone can help with this issue, I would greatly appreicate it.
Watson report about to be sent for process id: 10168, with parameters: E12, c-RTL-AMD64, 14.03.0123.004, M.E.AddressBook.Service, M.Exchange.Rpc, M.E.R.R.RfriRpcOperationBase.Complete, System.ArgumentException, a3e, 14.03.0123.002.
ErrorReportingEnabled: True
That error is followed by a message that the Address Book service has sucessfully started

Hello,
For exchange 2010 sp3, there is no article to explain the issue.
I suggest you run EXBPA aganist your exchange server health check.
Cara Chen
TechNet Community Support

Exchange 2010 SP3 maximum journal mailbox size for performance

Hello all,
Does anyone know if there is a limit mailbox
size near 01 terabyte than
above it generates performance problems?
We have a journaling mailbox that
reached today 1.077 GB and
from there began the process very
slowly messages to store.
All (4) Exchange Hub Trasnport that try to connect to this store get an 4.32 store drive error. A new
journal mailbox was created in the same
database, and the problem was solved.
Thanks
João Paulo.
Exchange 2010 SP3 RU8 on-premisses

Hi Paulo,
Base on my knowledge, journaling mailbox as the same as any other mailbox, the maximum size depends on the data to be stored in the mailbox, the hardware resources available, and the disaster recovery requirements
for the server where the journaling mailbox is located.
If you configure journaling mailboxes without storage quotas, monitor the Mailbox server to ensure that it doesn't exceed the available hardware resources or disaster recovery capabilities.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Exchange 2010 sp3 single user account maximum device

Hi
I am using Exchange 2010 sp3;
I have one mailbox (like sales department) and Ten device connected this account with outlook .But ı want connect one more device this account , outlook connection   fails you have to connect to exchange (.ost)
how can ı do
Thank you in advance for your help
RunspaceId                                : 63448235-4347-4e51-846d-4e6f1a9cb7ce
IsDefault                                 : True
AnonymousMaxConcurrency                   : 1
AnonymousPercentTimeInAD                  :
AnonymousPercentTimeInCAS                 :
AnonymousPercentTimeInMailboxRPC          :
EASMaxConcurrency                         : 20
EASPercentTimeInAD                        :
EASPercentTimeInCAS                       :
EASPercentTimeInMailboxRPC                :
EASMaxDevices                             : 50
EASMaxDeviceDeletesPerMonth               :
EWSMaxConcurrency                         : 10
EWSPercentTimeInAD                        : 50
EWSPercentTimeInCAS                       : 90
EWSPercentTimeInMailboxRPC                : 60
EWSMaxSubscriptions                       : 5000
EWSFastSearchTimeoutInSeconds             : 60
EWSFindCountLimit                         : 1000
IMAPMaxConcurrency                        :
IMAPPercentTimeInAD                       :
IMAPPercentTimeInCAS                      :
IMAPPercentTimeInMailboxRPC               :
OWAMaxConcurrency                         : 5
OWAPercentTimeInAD                        : 30
OWAPercentTimeInCAS                       : 150
OWAPercentTimeInMailboxRPC                : 150
POPMaxConcurrency                         : 20
POPPercentTimeInAD                        :
POPPercentTimeInCAS                       :
POPPercentTimeInMailboxRPC                :
PowerShellMaxConcurrency                  : 18
PowerShellMaxTenantConcurrency            :
PowerShellMaxCmdlets                      :
PowerShellMaxCmdletsTimePeriod            :
ExchangeMaxCmdlets                        :
PowerShellMaxCmdletQueueDepth             :
PowerShellMaxDestructiveCmdlets           :
PowerShellMaxDestructiveCmdletsTimePeriod :
RCAMaxConcurrency                         : 20
RCAPercentTimeInAD                        : 5
RCAPercentTimeInCAS                       : 205
RCAPercentTimeInMailboxRPC                : 200
CPAMaxConcurrency                         : 20
CPAPercentTimeInCAS                       : 205
CPAPercentTimeInMailboxRPC                : 200
MessageRateLimit                          :
RecipientRateLimit                        :
ForwardeeLimit                            :
CPUStartPercent                           : 75
esat erol yağcı Maltepe bilgi işlem

Hi ,
Please check the below mentioned thread .
https://social.technet.microsoft.com/Forums/office/en-US/b303e2a8-d650-47e1-9a1f-13f7d06d3e0b/single-mailbox-opened-in-multipul-outlook-clients?forum=exchangesvrgeneral
Thanks & Regards S.Nithyanandham

Exchange 2010 SP3 Rollup 8v2 causes client connectivity issues

I installed SP3 Rollup 8v2 this weekend, going from 7. Since then we are having random client connectivity issues. New profiles can't be created, and some users can't access resources when booking meetings. We can do a registry fix to their machines to add
a DS Server, but this is a workaround only. I have uninstalled the Rollup 8v2 and we are still having the issue.
I thought 8v2 was supposed to fix this issue!

Hi,
According to your post, I understand that outlook client cannot connect to Exchange server to configure profile and cannot get list of resources room when upgrade to Exchange 2010 SP3 Rollup 8v2, the temporary solution is that specify the DC in registry.
If I misunderstand your concern, please do not hesitate to let me know.
Is there error message when configure Outlook failed?
Please run Test E-mail AutoConfiguration and Outlook connection status to double confirm the URL and FQDN of Exchange server.
As additional, please run below command to double check the state of Exchange system component:
Get-ServerComponentstate -Identity “servername”
If the state is Inactive, please run below command to active relevant component:
Set-ServerComponentState <Identity> -Component “component name” -Requester HealthAPI -State Active
More details about Server Component States in Exchange, for your reference:
http://blogs.technet.com/b/exchange/archive/2013/09/26/server-component-states-in-exchange-2013.aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Exchange 2010 SP3 - "500 5.3.3 Unrecognized command" in SMTP Receive Log. Senders get message with the same problem

Hi
My exchange environment consist with "Server Exchange 2010 SP3" and "Edge Server with Exchange 2010 SP3".
On Edge server in SMTP receive log i get every now and then an entry: xxxxxx 500 5.3.3 Unrecognized command.
It is serius problem because I got few e-mails from senders that they had problem with sending e-mail messages to our e-mail domain. They receive e-mail report, for example
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain domena.plby
mail.domena.pl.
[95.xxx.xxx.xx].
The error that the other server returned was:
500 5.3.3 Unrecognized command
Could you help me to solve this problem? What could cause this problem?
Thank you in advance
Tomasz
Kind Regards Tomasz

I have the same issue, but there is plenty of hard disk storage on the Exchange Server. This seems to only be happening from Google Business account/ Postini. If I send message from my personal Gmail account it works fine, but an agency who is on Google
business seems to have issues sending to us and they are delayed, sometimes they get through and other times they just don't.
Results from Mail Acceptance Test:
I enter my internal address and the remote users postini account as the test setup I received two emails from the tool but the end results of the test are:
Error submitting mail
Mail submission failed: Error message: Syntax error, command unrecognized. The server response was: 5.3.3 Unrecognized command.
Google support stated this:
Here are the logs from Postini trying to connect to mydomain.com (IP x.x.x.x) :
1. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP-STLS:OK <null> TLSv1:RC4-SHA Validate:None 2. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:MAIL FROM:<[email protected]>
3. 2014/08/09 03:26:28 IP:209.85.218.50 Fdal:Customer has null root_iid outbound default at org 100000001 4, 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender <= FFD:250 Ok 5. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:RCPT TO:[email protected]>
6. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD => mydomain.com (x.x.x.x):Connection established 7. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD <= mydomain.com (x.x.x.x):220 server.mydomain.com
ESMTP Service ready 8. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:250 Ok 9. 2014/08/09 03:26:35 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender => FFD:968 last bytes of data with dot 10. 2014/08/09 03:28:05
IP:209.85.218.50 To:[email protected] From:[email protected]:1119780 FP:2603ec6d38c69886eb1000e516fb745a0384e50b SMTP:Delivery still in progress after 90 seconds, recording FP 11. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP
LOG: FFD => mydomain.com (x.x.x.x):failed to send the last period(.) 12. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] oremote:Skipping Archive for Sender because did not deliver message 13. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected]
SMTP:451 Remote connection lost - psmtp 14. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:451 Remote connection lost - psmtp
As you can see, on line 9, at 03:26:35, we declared to the receiving server what we were about to send. At the line number 10, almost two minutes passed without an authorization (250 OK) from the receiving server. You can see our status being pushed back
at that moment to the receiving mail server: SMTP:Delivery still in progress after 90 seconds. Two more minutes later the connection was simply dropped and so we generated a 400 error message to encourage the sending server to try again later (since no bounce
was given per say from the receiving server, we won't hard-bounce it but defer it).
I hope this will help. you can try to look in the mydomain.com inbound logs and see at that exact time what happened? Unfortunately, our visibility pretty much ends there as we don't have full visibility of your mail environment. You'll need to investigate
within your own environment unfortunately. If you have any more information to share with me, in case it might help me help you, feel free to do so. I'll leave this case opened for now.
Sincerely,
Patricia
Google Enterprise Support

List of all historical meetings and attendants - resource mailbox exchange 2010 sp3

Hi,
I'm an exchange admin, and i'm looking for a PS script of some sort to get a list of all the meetings held in a resource mailbox and its attendants.
ie: meeting room 1 -> get a list of all the meetings held there and the attendants for a period of 3 months.
Is there anybody who has experience with this ?
(Exchange 2010 sp3)u

Hi,
I recommend that you post this in Script Forum,there are more Powershell experts to help you:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
Thanks.
Niko Cheng
TechNet Community Support

Event ID: 4999 - MSExchange Common - Exchange 2010 SP3

Hi all,
I have Exchange 2010 SP3 RU4 and since yesterday without reason (I didn´t patch anything, configure etc.) following error randomly appears in app eventlog:
Watson report about to be sent for process id: 6000, with parameters: E12, c-RTL-AMD64, 14.03.0151.000, AirSync, MSExchange ActiveSync, Microsoft.Exchange.Data.Storage.GlobalObjectId.IsForeignUid, UnexpectedCondition:NullReferenceException, 54b1,
14.03.0151.000.
ErrorReportingEnabled: True
I´ve tried to find some info but no luck.
Does anybody know how to fix this?
Thanks in advance, O.

Resolved..
A few days ago I hid some testing resource mailboxes (rooms) in GAL, which were used in Cisco TMSXE (Videoconferencing SW). Then, when I restarted the IIS, these errors appeared, because of Cisco TMSXE couldn´t find the room mailboxes. So I unhide
them and errors are gone..

Event ID 9877, Exchange 2010 SP3 RU4

On 2/19 I installed RU4 for Exchange 2010 SP3 on a server at a client's site. This is a single server with all the roles on it, with about 40-45 mailboxes. Ever since then, during the busiest hours of the day (around 7AM to 5:30PM or so), I get the
following event log error on this server:
Log Name:      Application
Source:        MSExchangeIS Mailbox Store
Date:          2/20/2014 6:58:49 AM
Event ID:      9877
Task Category: Content Indexing
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      server.domain.com
Description:
Content Indexing function 'CISearch::EcGetRowsetAndAccessor' received an unusual and unexpected error code from MSSearch.
Mailbox Database: Mailbox Database 0784353824
Error Code: 0x80043629
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchangeIS Mailbox Store" />
    <EventID Qualifiers="49198">9877</EventID>
    <Level>2</Level>
    <Task>46</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-20T11:58:49.000000000Z" />
    <EventRecordID>423922</EventRecordID>
    <Channel>Application</Channel>
    <Computer>server.domain.com</Computer>
    <Security />
</System>
<EventData>
    <Data>CISearch::EcGetRowsetAndAccessor</Data>
    <Data>Mailbox Database 0784353824</Data>
    <Data>0x80043629</Data>
    <Binary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inary>
</EventData>
</Event>
The frequency of these errors varies and it definitely seems to be related to the amount of traffic. Over the weekend it only occured about 5-10 times a day. For the past couple of days, it's been pretty constant about every 15 minutes or
so all day.
I've looked this up, but I've only found a few posts mentioning similar errors, all relating to earlier versions of Exchange 2010. Supposedly this problem was fixed in one of the rollups to SP1 or SP2, I think. I never saw these errors, though,
until the SP3 RU4 rollup. I haven't heard any complaints from users, but I'm concerned that this might escalate and start causing noticeable searching issues.
Any ideas would be appreciated.
Deb

Hi Deb,
We're getting the same error as you on Exchange 2010. We have exchange 2010 and exchange 2013 running in a coexisting environment. Since we applied Service Pack 1 for Exchange 2013, we've had nothing but issues!
I've tried the rebuild of the index catalogues by following these instructions:
http://ghousewin.blogspot.in/2012/08/not-able-to-search-in-owa-event-id-9877.html
This failed to resolve the issues too. We've rebooted the server, restarted all the search services and still nothing! We're pulling our hair out here!
The only thing I haven't tried is the prepareAD commands in this post:
http://social.technet.microsoft.com/Forums/exchange/en-US/7a4a7400-a582-4f95-9360-6d84e66e87ad/ex2010-2node-dag-search-in-owa-not-working-caused-by-eventid-9877-content-indexing-function
I'm unable to try this during the day as we have no testing
environment and would hate to mess the production environment up if this went wrong.
If you're able to try this during the day, would you let us know how it goes?
Many thanks,
Stephen

Install Exchange 2010 Sp3 on Windows 2012 R2

Dear All,
From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
Thank you

The prerequisite check is checking that the required Windows components are installed. Exchange 2010 is still not supported on Windows Server 2012 R2.

Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjanc

Hi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5

I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers.

[SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

Hi there!
I have a problem which makes me very angry already :)
I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
LOGS on the second nodes:
Application Log
"Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
Failover Clustering Diagnostic Log
"[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
CMDLET Error:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:06:21
MSC-CO-EXC-02V
Failed
Error:
A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
(MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
This operation returned because the timeout period expired
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
Warning:
Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
Warning:
The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
Elapsed Time: 00:06:21
UPD:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.
Please, help me if you can.

Hi, Jared! Thank you for the reply.
Of course I did it already :) I have new info:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.

Is WMF3 or WMF4 supported in Exchange 2010 SP3 UR5 installed on Server 2008 R2 SP1?

We'd like to upgrade WMF (aka powershell) on our Exchange 2010 servers but I haven't been able to find any updated information on support with the most recent servicepack/update rollup.
Is installing WMF3 or WMF4 supported on Server 2008 R2 SP1 w/ Exchange 2010 SP3 UR5?

WindowsPowerShell 3.0 is supported. Haven't seen 4.0 running for exchange 2010 on 2008 R2
http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/30/weekend-scripter-wmf-powershell-and-exchange-server-compatibility.aspx
http://blog.crayon.no/blogs/janegil/archive/2013/11/17/how_2D00_to_2D00_install_2D00_windows_2D00_powershell_2D00_4_2D00_0.aspx
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Gulab,
Where did you read that WMF3 is supported on Exchange 2010 SP3 on Server 2008 R2?
Neither of the links you pasted suggest that and in fact explicitly say "There has been no testing with ExchangeServer 2010 SP3 and WMF 3.0 installed on Windows Server 2008 R2."
My Bad, that was TYPO...
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2010 SP3 - Can DAG member be on OS 2012 R2 STD?

Hi guys.
We have Exchange 2010 SP3 on 2008 r2 enterprise.
now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
with best regards,
bostjanc

Hi guys.
We have Exchange 2010 SP3 on 2008 r2 enterprise.
now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
with best regards,
bostjanc
No. It wont let you do that.
http://technet.microsoft.com/en-us/library/dd638104(v=exchg.141).aspx
DAGs are available in both Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition. In addition, a DAG can contain a mix of servers running Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition.
Each member of the DAG must also be running the same operating system. Exchange 2010 is supported on both the Windows Server 2008 and Windows Server 2008 R2 operating systems. All members of a DAG must run either Windows Server 2008 or Windows Server 2008
R2. They can't contain a combination of both Windows Server 2008 and Windows Server 2008 R2.
In addition to meeting the prerequisites for installing Exchange 2010, there are operating system requirements that must be met. DAGs use Windows Failover Clustering technology, and as a result, they require the Enterprise version of Windows.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Maximum Duration in Minutes Room Booking - Exchange 2010 sp3

Similar Messages

Maybe you are looking for