Maximum DVD size?

Just learning with this product so please bear with me.
This was just an experiment not with production media so no worries if it baulks! Anyway - I was tying to see if DVD Studio would compress 4 hrs of video onto one SL-DVD.
The projected was created/encoded successfully - estimated size 10.2gb. I was hoping the build process would shrink the DVD to 4.3gb but this never happened despite me setting the project as single layer.
Does DVD SPro compress in this instance or have I got it wrong!?
Steve

As mark and David have said, DVDSP is not going to calculate the encode rate for you... it works from the basis that you know what settings to use and it applies the ones you give it in the application's preferences.
You really should follow the references to bit budgets... to know how much to compress the material will depend on a combination of factors.
I would suggest that you also consider using an encoder which can work at half D1, or encode to MPEG1 if you need to fit this material on a single layer DVD-R...

Similar Messages

HELP!!! layer 0 exceeds the maximum layer size allowed (DVD STUDIO PRO)

when I try to burn a dual dvd with 7.1 gb on it. The discs are 8.5gb dual dvd's, it says this in the error box.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.
I have tried to dual layer break point on a chapter half way through and other locations, but it still says it. What do I do???? I need to get this done ASAP!!!!! Can you please help, its kinda a emegency!!!!!!
please email me back at [email protected]
Thanks so much
G5 Mac OS X (10.4.6)

Hey timeline
welcome to the apple boards...
ill give you the easy fix, although i would recommend the proper fix.
first, build your project on any of your drives so you can see your audio and video TS folders.
once you see your build, then click on "Format" and before you click on format (on the lower right hand corner of the Format window, click on the second tab and under "Layer Break" click the drop down box and whatever is NOT greyed out, can be used as a layer break.
the more proper way do it it would require you to do some calculations based on the amount of video in your project and re-encode your video.
hope that helps
Mikey M.

How Do I Detemine Maximum DVD Time For A PCM Audio DVD

I have been working with my CS2 Premiere to create some auto play, audio-only DVDs that are autoplay. To clear the air, yes I know that CS4 will permit 24bit-96 kHz. For the time being 16 bit-48 kHz will suffice as it has CD quality The bonus that a DVD format provides a greater playing times. So the object is to make a PCM audio only DVD.
Here is my problem: How to get really long playing time. I know I can make high quality, 2-channel (ordinary stereo) DVD-A's up to 3 hours using Minatonka Bronze. Unfortunately, DVD-A discs are worthless as they cannot play in 90% of DVD players, but they prove the time point. I would think that one should be able to make a conventional DVD, but with the PCM sound format of that same length.
I just finished one that fit with a 103 minute, 16/48 stereo audio file of 1.11 GB size.   I also had a video file that I created using several photos. Sorry, don't have the final video file size. I erased it all from my computer. However, the final disc size was 3.754 GB. A little extrapolation suggests a maximum DVD length of 119 minutes. That with simple video and PCM audio. Now, can one make a similar DVD with 150 minutes?
I had three 48 kHz files that I created in Adobe Audion. They were 1.599, 0.911, and 0.974 GBs in size. That added up to 3.480. The playing time is about 2:30 Hours; quite a bit less than 3 hours.   I tried burning a DVD with these, audio-files-only. I checked lowest quality video, used no video, and got an Export To DVD error that I had "insufficient" space on the 4.7 GB disc! So, I used the two latter files, which added to only 1.884 GB. Premiere did not baulk, and it successfully burned a DVD that played. Then I added the 1.599 GB file, and, once again, it produced an error. This was clearly not going to work.
At this point, I realized that Audition had done what it liked to do: It had saved the 16 bit-48 kHz files as 32 bit-48 kHz! So, I went back to Audition and used EDIT to change the files to genuine 16 bit-48 kHz files. When I opened them in Premiere, Premiere reported 16 bit-48 kHz files. Their sizes were now, 0.799, 0.456, and 0.487 GB. Please note that this totals 1.742 GB. This is less than the 1.884 GB I had successfully used before.   Once again, I was getting the "insufficient" space error.
I searched the CS2 Premiere manual and its index, but cannot really find any way to calculate maximum times, or squeezing the most out. So, anybody got some ideas?
Mike

When working from DVD-Videos, this ARTICLE might be helpful - All VOB's (the container for the MPEG-2 files in a DVD-Video) are not created equally.
Most DVR's write a VOB 01, that is not up to the DVD-specs. That can create a problem for PrE (and also PrPro), and if you have issues, please do follow Neale's advice.
Good luck and welcome to the forum.
Hunt

Formatting was not successful. Layer 0 exceeds the maximum layer size

I am attempting to burn my first dvd w/ dvdstudio pro. I pressed burn. Processing took approximately 25 minutes. Everything seems to be goin well. The I get the following message,
"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
Can anyone help me out with this?
The following info was in the build log,
Starting DVD Build MUSICVIDEOMIXTAPE...
Compiler Initializing...
Precompiling Project MUSICVIDEOMIXTAPE
Compiling VMG Information...
Created 8 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Generating Transition: VTSM #01, VOB #1...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
2 VTSs and 2 Titles will be created...
Compiling VTS#1 (drivin me wild- Common & Lilly Allen)...
Muxing VTS011.VOB
Done.
Compiling VTS#2 (d12 vid mix tape)...
Writing VTS020.VOB
Muxing VTS021.VOB
Done.
Linking VMG...
Linking VTS#1...
Linking VTS#2...
Writing VTS#1...
Writing VTS#2...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘MUSICVIDEOMIXTAPE.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

It sounds like you are trying to burn a dual layer disc. Do you need a dual layer disc? (i.e., do you have more than 4.3 GB of material?) If you do then there is a tutorial at;
http://www.kenstone.net/fcphomepage/dual_layer_mediagary.html

The initial heap size must be less than or equal to the maximum heap size.

All,
Please help!!
I have tested my Application Client Project in WSAD on my pc and it works fine.
I have 1gb RAM on my pc. When I deploy the same app on another xp pc(same as mine but 512mb RAM) I get a heap size error. Here is the exact error:
Incompatible initial and maximum heap sizes specified:
initial size: 268435456 bytes, maximum heap size: 267380736 bytes
The initial heap size must be less than or equal to the maximum heap size.
The default initial and maximum heap sizes are 4194304 and 267380736 bytes.
Usage: java [-options] class [args...]
(to execute a class)
or java -jar [-options] jarfile [args...]
(to execute a jar file)
where options include:
-cp -classpath <directories and zip/jar files separated by ;>
set search path for application classes and resources
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
Could not create the Java virtual machine.
Press any key to continue . . .
Here is the batch file that runs my app:
@echo off
SET appClientEar=C:\corp\apps\mts\jars\MTSClientEAR.ear
set JVM_ARGS=-Xms256M -Xmx256M
set CLIENT_PROPS=C:\corp\apps\mts\jars\medicalclient.properties
set APP_ARGS=
call C:\bnsf\IBM\WebSphere\AppClient\bin\launchClientBNSF.bat "%JVM_ARGS%" %appClientEar% "-CCpropfile=%CLIENT_PROPS%" %APP_ARGS%
@pause
I have changed the value of Xms and Xmx of JVM_ARGS to different size but I sitll get error. Anyone knows what the problem is. Thanks..

Don't know why, but the "maximum heap size: 267380736 bytes" value is just slightly less than 256*1024*1024, wheras the reported initial size is equal to that.
Try setting the initial value to 255MB.

How to change font size, maximum column size in the result screen ?

hi All
That's great when using SQL Dev.
But I also have a trouble that how to change font size, maximum column size in the result screen ?
My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
Appreciate for anyone to help us.
Thanks all.
Sigmasvn

You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
Also, there s the option of switching the layout of a record in the grid.
Sue

How do I organize photos in DVD size folders, by topic, by date, etc? I plan to set up a new archive on an external hard drive (1 TB) for about 7500 photos. Some from a series of XP files, the rest from iPhoto. I use iPhoto11 on Lion with a 2011 MacBoo

I need to know several answers, and I don't feel I can do it without the basic folder system. Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD. How can I keep the captions on my photos (not events) when I print or transfer to a new folder? I have been using computers for 20+ years for photos, and have scanned some on Windows and transferred some but not all that I wish to archive in new compositions, albums, whatever that are not all on iPhoto. i also am concerned about overflowing my capacity on MacBook Pro 2011. Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size. Is this my only option? I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?

Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD

What is an idea of maximum file size for a film in Captivate?

Hi there,
I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
Thanks in advance

Probably better guidelines that dictates 'size' of a vi are:
typically no more than 1 video screen in size
is it legible
and is it's function and operation clear.
I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Maximum file-size for HR EIC emails

Hi folks
We currently use EIC in ERP, and have an issue with sending large emails/attachments as the maximum file-size appears to be only 2MB. This is set in the IMG activity Employee Interaction Center (EIC) -> Interaction Center Web-Client -> Communication Channels ->E-Mail -> Define E-Mail Profiles, the attachment maximum size is set to a maximum of 2,147,483 bytes.
I have tried searching for anyone else having a similar problem, but haven't found anything. I would imagine many customers would have EIC users in a Shared Services environment sending attachments over 2 meg; so before we log a call with SAP, has anyone else had this issue and how did you resolve it?
Thanks very much.
James

The maximum value is 2,147,483 bytes, which is what the config is set to. This seems pretty low, especially in this day and age.

Maximum font size for auto-sized form text

You need to let the user select a maximum font size for automatically sized text. If most of your fields are set at 10pt type, but you have one field for which you want the text to resize automatically, it looks stupid if that cell contains a small amount of text that’s set at 16pt or whatever. If you could set the maximum font size to 10pt for that field, then the text would be consistent with the text in the other fields unless there is so much text that it needs to scale down.

Can anyone please advise?
Cheers

Set maximum panel size

Hi,
I would like to know how can I set the maximum panel size, in order
that when I maximize it with a state property node set to 5 (maximized)
when I open it, it don't pass the size I want for that panel.
How Can I do It? I can set the minimum panel size, in File->Vi
properties->Window size but I can't set the maximum panel size?
Thanks,
ToNi.

Hi,
From my vi, before I call another vi from it, I have a FP Open and FP.
State property set to True and 4 (Minimized) respectively and then I
use a Run Vi invoke node and finally, after it, I have another FP.
State property set to 1 (Standard). My front panel when opens has
the same size as I saved it but LV not redraws it well. How Can I do to
solve this kind of problem? I have this problem since a lot of time ago.
ToNi.
Attachments:
sample.JPG ‏40 KB

What is the maximum file size for CSV that Excel can open ? (Excel 2013 64bit)

Hello,
Before anyone jumps in, I am not talking about the maximum worksheet size of 1048576 rows by 16384 columns.
I have client whom has a 1.5 Gb CSV file, 1.9, 2.6, 5, 17 and 89 Gb file (Huge).
If I open the 1.5 Gb, the file opens (After waiting 5 minutes) and then a warning pops up that only the first 1048576 rows have loaded. That is fair enough.
If I try and open any of the others, Excel comes up to a blank worksheet. No errors. It just seems to ignore the file I tried to open. This happens from within Excel (File - open) or from double clicking the file in explorer.
Excel goes to this blank page almost imeadiatly. It does not even try to open the file.
If I try with Ms Access, I get a size warning and it refuses to load the file. (At least I get a warning)
I would have expected Excel to load at least the first 1048576 rows (If that is what there are in the file), and give an error.
The computer is more than capable (Xeon processors, 16 Gb ram, SSD hard disks top of the line HP Z820 power workstation).
With the 1.5 Gb file loaded to 1048576 rows, it uses 15% ram/pagefile. CPU's hit about 5%.
I have confirmed it is Win 7 64bit, Excel 64bit. I am fairly confident we are over the file size but without an error message, I don't know what to tell my client whom is looking to me for answers.
I have already discussed that the 89gb file in Excel is unreasonable and they are looking at a stat's package but I need an answer on these smaller files.
Anyone got any ides ?
Michael Jenkin (Mickyj) www.mickyj.com (Community website) - SBS MVP (2004 - 2008) *5 times Microsoft MVP award winner *Previously MacWorld Australia contributer *Previously APAC Vice Chairman Culminis (Pro IT User group support system)* APAC chairman GITCA
*Director Business Technology Partners, Microsoft Small Business Specialist, SMB150 2012 Member

Hi,
The 1,048,576 rows & 16,384 columns is the
workbook size limitation in Excel 2013. Thus, I recommend we try the Mr. Bernie's suggestions to import the large CSV file.
1. Use VBA to read the file line by line and split/examine the import file in sections. If you have further question about the VBA, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
2. Use Excel 2013 add-ins. Power Pivot and Power Query. For more detailed information, please see the below articles:
http://social.technet.microsoft.com/Forums/en-US/9243a533-4575-4fd6-b93a-4b95d21d9b10/table-with-more-than-1-048-576-rows-in-power-query-excel-2013?fo
http://www.microsofttrends.com/2014/02/09/how-much-data-can-powerpivot-really-manage-how-about-122-million-records/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Important conceptual question about Application Module, Maximum Pool Size

Hello everyone,
We have a critical question about the Application Module default settings (taking the DB connections from a DataSource)
I know that on the Web it is generally suggested that each request must end with either a commit or rollback when executing PL/SQL blocks "directly" on the DB without the framework BC/ViewObject/Entity service intervention.
Now, for some reasons, we started to develop our applications with thinking that each Web Session would reference exactly one DB session (opened by any instance taken from the AM pool) for the whole duration of the session, so that the changes made by each Web session to its DB session would never interfere with the changes made by "other" Web Sessions to "other" DB sessions .
In other words, because of that convincement we often implemented sort of "transactions" that open and close (with either commit or rollback) each DB session not in/after a single HTTP request, but during many HTTP Requests.
As a concrete example think of this scenario:
1. the user presses the "Insert" button. An HTTP request is fired. The action listener is executed and ends up with inserting rows in a table via a PL SQL block (not via the ViewObjects API).
2. no commit or rollback after the above PL/SQL block is done yet.
3. finally the user presses a "Commit" or "Rollback" button, firing the call to the appropriate AM methos.
Those three requests consist of what I called "transaction".
From the documentation it's clear that there is no guarantee that the couple AM istance + DB session is the same during all the requests.
This means that, during step 2, it's possible that another user might reference the same "pending" AM/DbSession for his needs and "steal" somehow the work done via PL/SQL after step 1. (This happens because sessions taken by the pool are always rolled back by default.)
Now my question is:
Suppose we set the "Maximum Pool Size" parameter to very a great number (always inferior to the maximum number of concurrent users):
Is there any guarantee that all the requests will be isolated in that case?
I hope the problem is clear.
Let me know if you want more details.

Thanks for the answers.
If I am right, from all your answers about resource avaiability, this means that even supposing the framework is able to always give us the same AM instance back from the AM pool (by following the session-affinity criterias), there is, however, no "connection affinity" with the connections from the DataSource. This means that the "same AM instance" might take the "a new DB connection", if necessary, from the connection pool of the DataSource. If that happens, that could give us the same problems as taking "a new AM instance" (that is, not following session-affinity) from the beginning, since each time an a new connection is taken (either via a new AM instance or via the same AM instance plus a new DB connection), the corresponding DB session is rolle back by default, clearing all the pending transactions we might have performed before with direct PL/SQL calls bypassing the AM services during the life cycle of our application, so that the new HTTP request will have a clean DB session to start to work with.

Export-csv output maximum row size

Hi all. May I know the maximum row size that can output to .csv using 'export-csv'??

There's no limit on writing to a CSV file.
You can try:
# max rows to export to CSV:
$i=0
While ($true) { #Forever
$i++
$i
"Some text" | Export-Csv -Path .\test12.csv -Append -NoTypeInformation
until you run out of disk space, which may take a while. A million lines using the above script makes a 5 BM file..
Now reading it back is an entirely different story. Try
Delimit..
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Maximum Artboard Size (Not Canvas Size)

Hi,
I read that maximum canvas size is 227in but Illustrator CC on both mac and windows and several different computer does not allow me to exceed 120in x 120 in. I can change my artboard size manually (shift+o) and drag the corners to 227inches but the number on the right upper corner is stuck on 120 inches. So what is the maximum size that I can work in Illustrator? If it is 227in why can't I make an Artboard bigger than 120 inches? And to avoid more confusion what is the canvas and what is the art board?
Thank you

mus,
When things become seriously weird, as in your case, it may be worth trying the list (you have been through 1) and 2) already, and I would suggest your skipping 3) and 5), which leaves 4) and 6).
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Maximum DVD size?

Similar Messages

Maybe you are looking for