Maximum hdd size for MacBook Pro 17" (late 2006)

I have macbook pro and looking to upgrade the base HDD of 160GB to maximum supported. I bought this in march 2007, so should be late 2006 model.
Can someone share the knowledge, if they had upgraded to the bigger HDD? Also what capacity we can go as max?
Thx

The only limit you have is about 1TB - now about the largest drives that will fit in notebook computers. Do you really have the need for something so large, though. You could get a good price on a 500-750GB drive and that would increase your internal storage nicely. Your model and OS don't limit you to the size of the hard drive you can install.
Clinton

Similar Messages

What is Max HDD size for MacBook Pro 15" bought in 2006-07

Hi
I bought a MacBook Pro 15" about 3.5 - 4 yrs ago. The model is A1211.
It came with 120GB HDD, 2GB RAM.
What is the maximum HDD size that this will support? The Apple store employee says, it will support only upto 160 GB. But, I am skeptical it would be that low.
So, was wondering if anybody knows the max size, and also, which HDD would be best. I want at least 320 GB.

You can get a 750 GB drive that is 9.5mm high. As far as I know, the 1 TB drives are all still 12.5 mm high, although that could change at any time.
The fastest 750 GB drive I know of is this one:
http://www.seagate.com/www/en-us/products/laptops/laptop-hard-drives/
It is 7200 RPM. At 5400 RPM, there are many other choices. You might want to shop at Newegg, which often has specials on drives, as does Tiger Direct. Newegg also has reviews of individual drives you can look at.
Personally, I like Western Digital drives, and put the 500 GB Scorpio Black drive in my 2007 MBP, where it has performed without issue. The largest drive that originally shipped with my MBP was a 4200RPM 250 GB drive, the very biggest one you could order in a MBP back then.
Any 2.5 inch SATA drive should work just fine. The only one I would avoid is WD's 640 GB drive because a number of people have has issues with it in their Macs.
You might shop around on line a bit, and if you are torn between two or more drives, post back with what they are and ask for opinions. Everybody has favorite drives, so it may not be possible to get anything other than a bunch of opinions.
One other thing to watch out for. Some drives are sold with or without some form of free fall sensor. Apple has its own built in sensor called the Sudden Motion Sensor. In some machines and drives, there seems to be a conflict between the drive's sensor and Apple's SMS. If that happens, you would need to disable Apple's sensor. Usually it's easier just to select the drive without a built-in sensor and let Apple's SMS work as its designed to do. In the Seagate drive I linked, it's called "G-Force", but would have a different name in a different brand.
Incidentally, you can up your RAM to 3 GB if you like.
Good luck!

Maximum HDD size for Satellite Pro 4290 ??

My hard disk is wearing out (Win 98 tells me it has many bad sectors). Do I have to fit a 6gig hard disk or can I upgrade? If so, how big a disk will the latest BIOS address?
I think I need a 2.5" 9.5mm disk, but I don't know if there are any other specifications I have to adhere to.
ALSO, if I buy a USB hard disk for back-up etc, will the computer see it? Is there a maximum size for external USB disks?
HELP!!!!
Mike

Hi Mike
There is no precise information or specification about this issue but I am sure that you can use 10 GB HDD without any problems.
I have two external HDD`s and I have no problem because I use both with USB 2.0. Your unit has just USB1.1 Maybe you should not use HDD with high capacity. I will try to connect my 30GB external HDD to USB1.1. After that I can report you what exactly happens.

Maximum HDD size for Satellite Pro 6000?

Hi, I am trying to install a 60 GB HD, but it formats, and it stops at Windows XP Pro instalation.
Is there a limit to HD size?
Thanx,
Ronaldo

Hi,
does it stop without any error message? If not then try another copy of WinXP since the Satellite Pro 6000 shouldnt have problems with that harddrive. I had 2 years a similar machine and I also had a 60GB Toshiba HDD installed. It worked like a charm, so I cannot imagine that the harddrive could be the problem.
Cheers

HT201364 why i don't install mac os x maverick for macbook pro retina later 2013?

why i don't install mac os x maverick for macbook pro retina later 2013?

Welcome to Apple Support Communities
The Late 2013 MacBook Pro already comes with OS X Mavericks. However, if you try to download OS X Mavericks from the Mac App Store, you will get a message telling you that your MacBook Pro is not compatible, when it is.
This is caused because the Late 2013 MacBook Pro is running a special OS X Mavericks version which is different than the version available in the Mac App Store. This makes that you get an error message when you try to download OS X Mavericks even when you are using it.
Instead of downloading OS X Mavericks from the Mac App Store, you can still download OS X Mavericks to reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 You will be able to download OS X Mavericks from the Mac App Store when your MacBook Pro uses the same version as all other Macs

Aren't the pages,numbers,keynote free for macbook pro retina late 2012 users?

Aren't pages, numbers and keynote free for macbook pro retina late 2012 users?

Free if you have iWork '09 on the MBP.
SG

MST Support for MacBook Pro Retina Late 2013 - DisplayPort 1.2 - Will it ever happen? (with sources)

So back in October, I purchased a brand new Macbook Pro Retina (MBPr), fully loaded with top of the line specs. I was soooo excited to have Thunderbolt 2 tech which Intel AND Apple describes as having DisplayPort 1.2a compatibility - which up to this point is unfortunately NOT the case. The point of the information/questions and requests in this article is to engage a conversation about the issues of not having MST support after Apple falsely mislead their consumers to think otherwise - especially when it is clear the MBPr is capable. Please read on...
Apple advertises that the Thunderbolt 2 ports on BOTH the MBPr and the new Mac Pro (NMP) will have 4K Display support with the famed 20gb/sec Ports (DisplayPort 1.2 only requires a little above 17gb/sec). Now that the 10.9.1 update has been released, we have failed to see MST or Multi-Stream Transport enabled on the MBPr Late 2013. Now, as for the New Mac Pro- it DOES have MST enabled in 10.9.1 with the AMD GPUs. For all of you out there that's questioning what this means, short answer is basically the Mac Pro will be able to power a 4K Monitor at 60Hz through the Thunderbolt 2 Port but the New MBPr is stuck with only HDMI 1.4 support which tops out at 4K 30Hz. 30Hz is unacceptable for anything but movies or a photo slideshow. At 30Hz the cursor will jump across the screen, eliminating any of the benefits of 4K.
BUT it gets worse...
Apple can be seen advertising that the new MBPr 15" model can power a 4K monitor THROUGH the Thunderbolt 2 Port here: http://www.apple.com/thunderbolt - This article quotes the following:
"Now with Thunderbolt 2 built into the new Mac Pro and MacBook Pro with Retina display, you can connect the latest 4K desktop displays and get double the bandwidth for your peripherals. And the two generations of Thunderbolt technology are compatible with each other."
Does this not let the consumer assume that the newest MBPr will be able to drive a 4K display through the Thunderbolt 2 Port? I would say yes it does, but at the time I wrote this, the TB2 Ports can't power a 4K display because, as previously stated, MST is disabled in Mavericks for the 15" MBPr Late 2013.
NOW, later on Apple posted the following article on 4K support here: http://support.apple.com/kb/HT6008
4K support on the MacBook Pro (Retina, Late 2013)
MacBook Pro supports 4K displays and Ultra HD TVs at the following resolutions and refresh rates with the built-in HDMI port:
3840 x 2160 at 30 Hz refresh rate
4096 x 2160 at 24 Hz refresh rate (mirroring is not supported at this resolution)
In the article above the New Mac Pro is listed as having support for a 4K Display with the Thunderbolt 2 Port (or MST DisplayPort 1.2a Technology) at 60Hz with no problem. This leads myself and many others to believe that MST will NEVER be enabled on the newest MacBook Pro Retina with Nvidia GPUs. Yes, 4K IS supported but ONLY through the HDMI 1.4 port, which has the limitation of only 30hz. This two-faced advertising is extremely upsetting to a LOT of people, including myself.
Interestingly enough, THIS IS NOT a hardware issue. If one ventures into Windows 8.1 via Bootcamp and connects a 4K Display via the Thunderbolt 2 (or through DP1.2) Port, the Display registers at 60Hz, thus proving that the Thundberbolt 2 Hub Controller is completely capable of MST DisplayPort functionality. Clearly this a driver issue with Apple, Nvidia or Intel or any combination. What Apple has done here is forcing any professional that desires stable and clear 4K technology through their MacBook Pro Retina to do so only using Windows 8.1 on their own machines! Definitely an oxymoron if you ask me...
Later on when the Mac Pro was ready for ordering, Apple placed the Sharp PN-K321 as a compatible option for a 4K Display. On the Store page featuring the (over three thousand dollar) Sharp 4K display, located here http://store.apple.com/us/product/HD971LL/A/sharp-32-pn-k321-4k-ultra-hd-led-mon itor?fnode=53 Apple states the following:
"Note that 4K DisplayPort operation is only compatible with the new Mac Pro (Late 2013)."
All of that being said, and I'm terribly sorry for my wordy ranting...
This brings me to a final two requests to ANYONE reading this post:
a) Has anyone working with the new 10.9.2 Beta Update seen evidence that DisplayPort 1.2 capabilities will be enabled for the new MacBook Pro Retina (Nvidia 750M) with the promised "Graphics Driver Updates" within the next Mavericks update?
and
b) To others that purchased or were/are thinking of purchasing a new MacBook Pro Retina with TB2 Ports: If you are just as upset as me about this crushing blow to consumers that just purchased a $3,000 laptop that were promised something that wasn't delivered - I urge you please, write to Apple and let them know they are making a mistake. You can do this though the support page or through http://www.apple.com/feedback
Thank you for your precious time, and if anyone has anything to contribute to this issue, please jump in....

GOOD NEWS!
The Mavericks 10.9.3 update adds official support for Thunderbolt 2, 4K!
I'm not sure if you will be able to daisy chain anything to the 4K display. I've read that the design of Thunderbolt 2 includes support for DisplayPort 1.2 multi-stream (MST), which allows this type of daisy chaining with 4K, but we don't know if Apple has this supported on it's machines. Apparently it's been buggy in development because the graphics driver needs to work correctly with the Thunderbolt 2 host controller. I'm sure they will work it out if they haven't already.
The above is all via found information on this topic, but you can follow some more discussion here:
http://forums.macrumors.com/showthread.php?t=1713876
One more note on Thunderbolt worth sharing: always keep your fastest peripherals closer to the computer in the chain. If you have a TB1 device directly connected to the computer, anything further down the chain will be limited to TB1 speed/capability regardless of it's native speed. Always connect TB2 devices first, and save anything TB1 for the end of the chain.

What's the maximum memory ram for Macbook Pro?

Hello,
May I know what's the maximum memory ram capacity for Macbook Pro?
I am having Macbook Pro - 2.53GHz Intel Core 2 Duo
Thank you!
Alvin

Hate to resurrect a dead horse but....I was looking in the instructions for memory upgrades and the instructions specified that the computer will only recognize 3 gigs. Will that still be in effect if I upgrade to Snow Leopard when it becomes available? Or do I need to save my pennies for a Mac Pro? What I am getting at is: is the reason for the RAM cap due to software issues, 64 bit not being native, different version of leopard used on notebooks, or is it due to hardware issues.

What is the maximum HDD size for Pavilion DV7-3105ea and can I add a 2nd HDD.

Hi,
Please could someone advise me as to the maximum HDD size that can be installed in a Pavilion DV7-3105ea.
Additionally is it possible to add a second HDD.
Thanks and kind regards,
jB

There is no theoretical limit the only limit is what is sold on the market. Any correctly sized SATA laptop drive will work. They do now make 1TB drives that will fit and yes there is a secondary hard drive bay so theoretically you could have 2TB of storage. You are going to need 1 or 2 drives like this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822152291
The drive has to be 9.5 mm in height some 1TB laptop drives are too thick.
You also likely need a second hard drive caddy/connector like this:
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=222&zenid=2a83d0d222d80c6...
And here is a link to the Manual showing how to get to the hard drive bay:
Drive Manual
Check your system to see if a secondary drive caddy/connector is there but it likely is not and you need the part linked above. Good luck.

Maximum hard drive physical size for MacBook Pro 13" mid-2010 model

I'm planning to replace the hard drive in a MacBook Pro 13" mid-2010 - its the latest model just purchased.
I've searched the discussions on replacing the hard drive, and I've seen conflicting information on whether the 13.3" Macbook Pro will accept the 12.5mm height drives, or only the 9.5mm height drives.
And Apple support is no help - they don't know.
Can someone confirm exactly, whether the 12.5 mm drives will fit or not?

Thanks everyone - it looks like you've answered my question, and I'll mark it as such.
I think that my confusion is related to the mac terminology that you guys are using that I am not familiar with yet - I'm brand new to the world of Apple and Macs, so I've got a lot to learn ahead of me.
"S.U.", you said "The 12.5 mm drives will fit in all unibody MBP's". What is a "unibody" MacBook Pro? The one I have is the aluminum shell, not the older black or white case that appears to be some sort of plastic.
In another thread, you mentioned that you have 2 drives in your MacBook Pro. Is there really room for more than a single drive inside, or did you have to remove the optical drive and put the second drive in its place?
"eww", you mentioned "And it doesn't affect the computer's warranty". When I talked with Apple support about replacing the drive, they said that there are no user-serviceable parts in a MacBook Pro, and it might void my warranty to replace the hard drive. I pointed out that they have several documents at the "Manuals" section of their website, explaining the exact steps to replace the hard drive (as well as memory and battery too), with no mention of voiding the warranty.
Is Apple support always so out of touch with their own web site and their own equipment/policies, or are they usually quite knowledgeable and helpful? I'd like to think that I can count on them when I have questions harder than "where's the ON button". But to their credit, they did mention that I visit these forums to see if anyone here could help.
"OrangeMarlin", you mentioned cloning the old drive first, and I plan to do that. The MacBook Pro is brand new, and has not been used yet, so there is no user data to be lost yet, but it would still be easier to clone the drive than try to install from scratch and hope that everything gets installed the same way as the factory drive came packed with.
While on the topic of cloning the drive and backups, I have plenty of external drives to do backups onto, but how do I go about doing backups/cloning? I've heard of "time machine", but it looks like I need a whole dedicated hardware system of some sort in order to use it? Or can I use it with any external hard drives? Or is there a better/preferable backup tool to use, and does it come with the mac, or must I get it separately?

Hard drive size for macbook pro

I have filled my hard drive storage and I would like to increase the storage size. What is the maximum size of drive I can go up to? I believe today that I have a 320 GB storage device.

A motherboard with SATA III - the first year of MacBook Pro with it didn't go smoothly as planned.
Apple has quietly introduced support for the next generation NVM Express (NVMe) interface to SSD Flash drives in their latest OS X 10.10.3 update as well as in the new Retina MacBook which was released on April 10th.
PCIe-SSD helps make things smaller, less watts and heat, as well as faster, but the heck with SATA II & III, where is our PCIe 3.0?
SSD tech has changed more and faster in the time since it hit mainstream in summer of 2008, constantly changing.
When the G5 came out, that summer almost no one expected or was ready to see and support an SATA disk drive.
Picking up a new tech interface and product? Apple? really?
Server Storage (and prices)
http://www.anandtech.com/show/7152/new-elements-to-samsung-ssds-the-mex-controll er-turbo-write-and-nvme
http://www.storagereview.com/samsung_announces_industry_s_first_25inch_nvme_ssd

Problems upgrading RAM for Macbook Pro 13" late 2011

First, thank you all for your assistance.
I don't know if this has happened to anyone yet. I have a 13" late 2011 MacBook Pro that came with a default 4 GB of RAM. I considered upgrading to 8 GB and problems arose: I had stripes 1 inch in lenght distributed across the screen. I've done some research and saw that it was a hardware problem with the Graphics Card/GPU. I switched back to the original 4 GB and so far so good, no problems. I did notice a few key things:
Originally I have 384 MB of Video Ram in the GPU
While using the 8 GB Ram upgrade, it said 512 (called my attention)
It reverted to 384 when switching to the original RAM
In the tech specs section of Apple Support site about my machine, it says that the Video RAM is "shared" with main memory. No other knowledge on that.
Could the RAM upgrade affected the memory supported by the GPU? Why did it increase? Is there any solution to this?
Thanks to everybody in advance.

It should - I've 16GB of RAM installed in my late 2011 15" and my built-in card now shows 512MB of VRAM. There might have been a problem with the RAM you installed. I would only buy Crucial, Kingston (not the 'value' brand), OWC or Corsair (again, not the 'value' brand).
Some RAM sellers simply have less than stellar performance using Macs. Make sure that you install the correct speed and specs as recommended by Apple.
Good luck,
Clinton

What is the default icon size for macbook pro 13 inch?

I have the 13 inch macbook pro, its not the retina. What is the default icon size for it? I accidently changed it on the show view options.

The default size is not related to the Mac Model, it's related to the OS X version. For Snow Leopard it's 48x48 pixels.
For Lion and Mountain Lion it's 64x64.
You can choose the size that is right for you. I typically use either 32x32 or 36x36. Some prefer larger some prefer smaller. It's up to you.
I've always found the default sizes to be too big for my taste.

Maximum HD size for Mac Pro (2006) Dual Core 2.66GHZ

I have purchased a second hand Mac Pro which has 4 empty HD bays, I would like to put at least 1TB, perhaps 2TB in each bay for a total of between 3 to 6TB maximum storage in the empty bays, but apparently Apple only formally supports up to 2 TB of storage with four 500 GB hard drives (one in each internal bay).
Has anyone had any problems with larger than recommended HD's?

1 TB and 2 TB are fine
Disks larger than 2.2 TB:have a problem being formated with the later OSX versions:
Format large disks
That bug appeared in 10.8.4, and has not yet been fixed.
using a Disk Utility from any older Mac OS X, including the mentioned 10.6 DVD (if your Mac can boot from it) or any saved Installer DVD or thumb drive will work.
Another work-around is to move that drive to an external enclosure and Erase it there (provided your enclosure is modern enough to deal with drives over 2.2TB.
Also, some disks larger than 3 TB or so have problems with the screws retaining the disks in the sled being too long because of the extra platters in the large disks

Maximum HDD size for HP 8510

Hi,
I have just bought an 8510p on auction and wanmt to upgrade the HDD from 120GB to 750GB.
Can nyone tell me if the 8510p can deal with a HDD that size?
If it can't what is the maximum size that can be installed?
Many thanks
Cameron
This question was solved.
View Solution.

Hi,
Based on the following specs, it uses SATA (most likely SATA II) HDD therefore you can use larger (capacity HDD). A 750Gb with 7200RPM will be very nice for this machine:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...
You may need to update BIOS for the machine:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?cc=us&prodNameId=3355680&prodSeri...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maximum hdd size for MacBook Pro 17" (late 2006)

Similar Messages

Maybe you are looking for