Maximum limit reached

When I plug in my iPhone 5s to my PC, I get an error message that says "limit is reached for this device." Anyone with similar problems and know how to fix it?

This is the complete message: "iTunes could not connect to the iPhone" Therese iPhone" because the unit reached a maximum time limit."
There may be some wrong words because I translated from Swedish to English.

Similar Messages

ISA 2006 slow response, connections timeout, maximum limit reached?

Hey guys,
I've been having an issue with a client's ISA Server for the past couple of weeks and haven't been able to understand why this is happening.
They have a couple of ISA Servers Enterprise Edition in an array. This ISA Servers give Internet access to the entire company. They have significant amount of traffic through a Cisco Iron Port that all the users proxy settings are configured to this device
and the Iron Port forwards the requests to the ISA Servers.
This implementation have been working fine for months, until a few weeks back that started to have slow response problems from the ISA Servers. Analyzing the reports from the ISA Servers, I've noticed an increased amount of traffic a few times this
has happened and mostly from the Iron Port. The Cisco people says this increase amount is due to the fact that the ISA Server stops responding and new requests are made at the moment from the device. We have configured the Iron port IP in the exceptions of
the Flood Mitigation Settings of the ISA Server, and configure it to take more than 20,000 connections.
Still after this configuration, the same problem raised a couple of days back. The ISA Servers stops responding and they need to be forced shut down and restarted to get them back to work.
There are also some errors from some other internal IPs that it reaches maximum connection limits, but these are about 10 errors like this only. I was thinking maybe there are some infected computers or something but they said that they scanned the ones
that show the errors and nothing is detected.
From the ISA reports of the time of the incident, I saw that it reached more than 15,000 concurrent connections. More than double of what it usually handles throughout the day.
I don't know if there is like a connection limit that the ISA can handle before it hangs of something?
Is there any ideas on what can be happening with this?
Thanks for any replies!
Eduardo Rojas

Hi,
Have you check the Event logs on the ISA Server? Any error?
You could use ISABPA to do some basic troubleshootings.
http://www.microsoft.com/en-hk/download/details.aspx?id=811
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maximum character output size limit reached

While importing data in Lumira using HANA based universes I am getting an error maximum character output size limit reached. Will appreciate any info on which server parameter controls this property. Attached the error message.

Hi everyone,
I believe Henry Banks discovered a solution for resolving this kind of error message. This is a limit which can be changed from within the "Web Intelligence Processing Server" from your CMC based on large amount of rows in your data. You can find his post about this here.
It's roughly about half way down the page and I hope it helps.
-Khuram

Error message "Maximum character output size limit reach Err_WIS_30272"

Users are getting the Error message "Maximum character output size limit reach Err_WIS_30272" while creating the Universe Query in the Live Office, but when they create the same query in the Web intelligence Report then it work fine.
To resolve this error message we can have to increase the value of "Maximum Character Stream Size" parameter in the Web intelligence Processing Server.
But i want to know the reason why the error message is only appearing in the Live Office Query, where it work fine in Web intelligence Query.
Are there architectural difference in Web intelligence and Live Office?

Hi,
maybe one of the following SAP Notes will answer your Question.
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133373030343526
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133373537353526
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133383336363426
Regards
-Seb.

Quota limit reached

When I check my iCloud storage, is says I have 4.7 free gigabytes, but when I try to send an e-mail, it says "Qouta limit reached". Please help!

Are you exceeding any of these limits (from http://support.apple.com/kb/ht4863)?
The total number of messages you can send each day (200 messages)
The number of recipients to whom you can send each day (1000 recipients)
The maximum number of recipients per message (100 recipients)
The size of incoming and outgoing messages (20 MB)

"account limit reached" Uhhhh... what?!

Just updated my iPhone to ios 7.0.1 and was asked to sign into my apple ID. But got the "account limit reached" pop up saying I can't sign into my account. What the heck?

I agree that it does SOUND like that. Yet, I did not attempt to create a new acount. I tried, maybe 6 times, to sign into my existing one.
"Account Limit Reached. Cannot add an apple ID at this time"
And when I try to sign into iCloud it says:
"Cannot Sign In. The maximum number of free accounts have been activated on this phone."
Which makes no sense to me because my account was already active on it. But now that I've upgraded today, it won't let me sign in again.
I am not the original user of this phone. So, maybe there are several old user's accounts already active on this phone. Can I delete the old users? Would that solve the problem? Or is the problem that Apple simply won't allow their phones to be passed on after the original user, so I'm screwed?

Wifi limit reached, what can I do?

Hi, I use wifi from the library on my macbook and tried to use the internet today but a box came up saying 'Maximum user limit reached, contact your wireless ISP' I've never had this before. I didn't think there was a limit to how much wifi you can get. Does anyone know what this is? I recently got a virgin mobile broadband usb modem and have used it aswell. Does that affect the amount of library wifi I can use? any advice would be great thanks!

The virgin mobile stick shouldn't effect anything.
Talk to someone who works at the library, they may be able to help you / give you a new balance.

Amount of data has exceeded maximum limit - Infopath form

Hello, I am having a problem on O365 concerning an Infopath form.
The warning goes like this : " The amount of data that was returned by a data connection has exceeded the maximum limit that was configured by the server administrator"
Solutions exist for other version of Sharepoint/Infopath. I see in SharePoint 2013, this value is 1500 kilobytes by default
and we can increase the maximum size of that. However, in SharePoint Online, it cannot be changed.
Can you guys please help?
Thanking you in advance.
Regards,
Nite

Hi Nite,
You should ask this question in the Office365 forums:
http://community.office365.com/
But as this question has been asked before, it is not possible to change the limit in O365. Please see this thread:
http://community.office365.com/en-us/f/154/t/252391.aspx
Nico Martens
SharePoint/Office365/Azure Consultant

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

http://support.apple.com/kb/HT4627

Device is no longer eligible for creating a free icloud account how to create on iphone, How do I create an apple ID if it says " No longer eligible for creating a free iCloud account "? It says Account limit reached?

device is no longer eligible for creating a free icloud account how to create on iphone, How do I create an apple ID if it says " No longer eligible for creating a free iCloud account "? It says Account limit reached?
Kindly advice.
Thanks
Mahfooz

I had the same issue on my iPod touch 4th Gen, I noticed the issue after updating the device to 6.1.5. I dont know what device or IOS your running but if it is similar then I think this ma be the cause. My solution to you is to create a free apple ID on their website, https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId. Hope this helped and good luck!

I keep seeing this message on my ASUS IPAD and need some help. "Tab Limit Reached, Can't Open A New Tab Until You Close One". I need help, please.

Tab Limit Reached, Can't Open A New Tab Until You Close One.
How do I close the tabs?

Asus doesn't make the iPad. Is this some other tablet?
Sounds like you have maxed out the browser windows. In the browser app, press the menu or overflow bottom to see if there is an window/tabs options. There you should see a thumbnail image of each tab you have opened and in the corner of each should be a X or minus symbol that you touch to close that tab/window.

ORA-30653: reject limit reached

Hello All,
Today we have encountered the following errors in our alert log file
ORA-20011: Approximate NDV failed: ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-30653: reject limit reached
when we checked the log in detail we got this through dbms_gather_stats procedure can any body suggest how to fix this issue.
Thanks,
S@ntosh

psantosh wrote:
Hello All,
Today we have encountered the following errors in our alert log file
ORA-20011: Approximate NDV failed: ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-30653: reject limit reached
when we checked the log in detail we got this through dbms_gather_stats procedure can any body suggest how to fix this issue.
Thanks,
S@ntoshrefer below link.
http://dbarajabaskar.blogspot.in/2011/12/ora-20011-approximate-ndv-failed-ora.html

Maximum limit of characters in the "IN" caluse

Hi,
Could any one please tell me what is the maximum limit of characters I can use in the âINâ clause?
I am getting the error when executing the query by using more than 1000 items ids in "IN" clause:
"SELECT * from test where item_id IN ('4a00dec880003900', '4a00dec88000259a','4a00dec88000259a','4a00dec880000518â, ............................., up to more than 1000 item ids)â
Thanks in advance.
Regards,
Ashok

You are limited to 1000 elements. There is no character limit, other than the one imposed by the limit on the number of elements.
If you have more than a couple dozen elements, I would generally suggest throwing them in a table and doing
WHERE item_id IN (SELECT item_id FROM <<new table>>)which can have an unlimited number of elements.
Additionally, note that when you start having a large number of elements, you are often better served using an EXISTS clause rather than an IN clause.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

10.2.0.3 driver. Maximum limit of parameters in a stored procedure

What is the Maximum limit of parameters that can be passed to a stored procedure via ODBC? We got a function that was executed successfully by the 9i driver with 272 parameters. The same function fails when executed with 10.2.0.3 driver with ORA-06513 error. We then tried reducing the parameters and found that the driver would allow a maximum of 253 parameters. Any ideas or thoughts on this is much appreciated.

Update for future reference:
Finally got a metalink account and ran with the latest instantclient patch. This seemed to stop the heap corruption problem.

Unable to type the maximum limit in scientific notation in a plot

Hi,
I am trying to plot some data that I measured in scientific notation (2E-19, etc) and I have tried everything to manually set the maximum/minimum limits of my plot in either axis without success. I have typed 2E-19 and even the number will all the preceding zeros, but I keep getting a "0" in the field. Does anyone know how to do this?
Thank you!

Thanks for the reply. Here is an example. I need to set the maximum limit of the y axis to 4E-19 (box highlighted in blue in the format bar of the screen shot)

Maximum limit reached

Similar Messages

Maybe you are looking for