Maximum LUN size for Windows 2012 server

Dear All
What is the Maximum size of the LUN that can be provided to windows 2012 server. Earlier it was 2 TB for windows 2008 server has the policy changed or it is still
the same.
Regards
Zubair

Hi,
Would you please let me know if your OS version is Windows Server 2012 or Windows Server 2012 Essentials? If it’s Windows Server 2012, you’d better ask the question in the File Services and
Storage forum. We will get a better assistance there.
File Services and Storage
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/threads
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Similar Messages

Windows Assessment and Deployment Kit (ADK) for Windows 2012 Server

Hi
I need to download Windows ADK for Windows 2012 Server. The link mentioned on microsoft website "http://www.microsoft.com/en-in/download/details.aspx?id=30718" is not reachable. Can anyone please tell me, from where I can download Windows ADK for
2012 Server.
Thanks
Manik Bansal

Hi Johan, Hi Manik,
Your reply with the link for the Windows Assessment and Deployment Kit (ADK) for Windows® 8 at http://www.microsoft.com/en-us/download/details.aspx?id=30652 has been very much appreciated.
I have also found a new and updated link to the *NEW* Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 at http://www.microsoft.com/en-us/download/details.aspx?id=39982 that was released and published on 2013-Oct-17.
Please note that this ADK can be used with Windows Server 2012, but there are some important differences between the Windows 8 ADK and the Windows Server 2012 ADK. The TechNet summary of the ADK may be explored at the link http://technet.microsoft.com/en-us/library/jj200116.aspx
The details of the ADK for Windows 8 may be explored at the link http://go.microsoft.com/fwlink/?LinkId=248647
Thank you,
Michael C.

What is the maximum partition size for windows on 128GB MBA?

I want to use Windows 7 as my primary OS on my 128GB MBA. How big can I make my windows partition? Is there anything special I need to do?

You have two options.
1. Put OSX on an external drive - OS X: Installing OS X on an external volume - Apple Support and make your internal disk to be fully Windows.
2. Use minimal OSX size between 16-32G, and the remainder for Windows.

Please Help: Setup up a e-mail Server for Windows 2012 Server Essentials ??

I am currently working on a PHP site and could use some help with ideas and suggestions to solve my problem. The website that I am working on is a Members Only Site, so when a user initially signs up, the server should automatically send an e-mail confirming the user so that he/she can finish being registered. I have never set up an email server before and would very much appreciate some help. Should I install a third party app to send emails for the server, or is there a way to have my server send the e-mails? I have tried looking at videos on Youtube, but they tend to be for more experienced individuals and less for NOOBS..Please HELP!!
This topic first appeared in the Spiceworks Community

Thanks for reply Simon.
I havent been able to find a guide so I have been guessing trying to setup the email server. Basically ive tried to setup a user email [email protected] (syncuser is also the account I use to sync my calendar and contacts)
I have turned on the mail server, made a new account on my Mac in mail:
Description: OS X Server
Email Address: [email protected]
Full Name: syncuser
Incoming Mail Server: myserver.local
User Name: syncuser
In the user account I have added the email address.
Im guesing I have to make the mail account somewhere in the server settings but I cant find anything. If turn off SSL in the mail settings I at least get a response from the server:
Unable to Connect
There may be a problem with the mail server or network. Verify the settings for account “OS X Server” or try again.
The server returned the error: The connection to the server “myserver.local” on port 143 failed (error 49: Can't assign requested address)

Windows 2012 server security checklist for corporate company standard/recommended check-list

Hello All,
Good Day.
I am looking for Windows 2012 server security checklist (standard hardening
settings), would you kindly assist me by providing Wintel 2012 standard/recommended check-list ASAP?
Thanks in advance.

Hi,
The Microsoft Security Compliance Manager 3.0 tool is designed to provide you with an end-to-end solution to help you plan, deploy, and monitor security baselines for computers running Windows Server 2012 in your environment.
For more detailed information, please refer to the articles below:
Windows Server 2012 Security Baseline
http://technet.microsoft.com/en-us/library/jj898542.aspx
Security Hardening Tips and Recommendations
http://social.technet.microsoft.com/wiki/contents/articles/18931.security-hardening-tips-and-recommendations.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hello,
I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
I've been receiving these errors at boot;
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          11/10/2009 7:51:03 AM
Event ID:      4
Task Category: Logging
Level:         Warning
Keywords:      Session
User:          SYSTEM
Computer:      herbt-PC
Description:
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>4</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>1</Task>
    <Opcode>10</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
    <EventRecordID>28</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="164" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>herbt-PC</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">ReadyBoot</Data>
    <Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
    <Data Name="ErrorCode">3221225864</Data>
    <Data Name="LoggingMode">0</Data>
    <Data Name="MaxFileSize">20971520</Data>
</EventData>
</Event>
The image for PID 4 is listed as System.
My searches have turned up similar events listed but no solutions.
Any help would be appreciated.
Cheers!

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
As suggested above I assume this is a microsoft issue? It has been discussed here and other forums for quite some time. I never have seen a fix? I wish when we received errors of this nature microsoft would tell us what they were. How is this related to superfetch? What is superfetch? Why would superfetch have changed?
BY THE WAY.... Superfetch is on(started) is on automatic and logs on as local system. So this is not the cause of my issue. Also what is readyboot? Does the average computer really know what these programs/services or unique microsoft words/terms are?
System
Provider
[ Name]
Microsoft-Windows-Kernel-EventTracing
[ Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
[ SystemTime]
2010-04-11T14:35:49.829600000Z
EventRecordID
25
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
48
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
Daddy-PC
Security
[ UserID]
S-1-5-18
EventData
SessionName
Circular Kernel Context Logger
FileName
ErrorCode
3221225525
LoggingMode
268436608
Windows7, Windows, Win7

New Platform Support for ColdFusion 10 and ColdFusion Builder 2.0.1: Windows 8 and Windows 2012 Serv

Microsoft Windows 8 and Microsoft Windows 2012 server are now supported platforms for ColdFusion 10. The new Windows installers are available for download to all retail and licensing customers as well on the trials download page.
The ColdFusion Builder 2.0.1 installers have also been updated to support Windows 8. The existing MAC OS X installer for ColdFusion Builder 2.0.1 has also been certified to now support MAC OS X 10.8.
Refer this technote for more details about the support.

@Adam @CarlV
>what's the version number when you dump the server scope?
ColdFusion Server - Evaluation 10,0,8,284032
OK I see, the I button reports differently to Settings Summary.
About ColdFusion »
System Information
Server Details
Server Product ColdFusion
Version 10,0,8,284032
Tomcat Version 7.0.23.0
Edition Enterprise (Trial)
Serial Number
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Server Settings > Settings Summary
System Information
Server Details
Server Product ColdFusion
Version ColdFusion 10,284032
Edition Enterprise (Trial)
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Adobe Driver Version 4.1 (Build 0001)
Regards Carl M.

Synchronization fails on Windows 2012 Server

Hello, Running DPM 2012 R2, Protected computer Windows 2012 Standard
I'm backing up only folders (19 GB) on a Windows 2012 server which also have SCCM 2012 installed on it. The initial replica and recovery point creations are successful. Any
scheduled synchronization job scheduled after will fail. The job display "In progress" but there is 0 MB data transferred and will remain in that stage for days until I cancel the job. A reboot of the protected server
resolves the issue temporarily where I might get a couple days of successful synchronization\recovery points but then the job will freeze again. I have looked in the event logs and the logs in Monitoring on the DPM server and also on the protected computer
but have not found any error that points to the cause. Has anyone seen this issue? Will be grateful if someone can point me in the right direction of troubleshooting this issue. Thank you.

Not seeing any errors that stands out. Here is the log from today's synchronization job that is hung.
2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(2078) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::DoFailureCleanup [00000000028FD320]
2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
2B98 2A40 06/18 15:05:54.409 31 vsssnapshotrequestor.cpp(119) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::~CVssSnapshotRequestor [00000000028FD320]
2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(2044) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::CleanUp [00000000028FD320]
2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
I ran the VSSADMIN LIST WRITERS command after I cancelled the job and this is the returned message.
"Waiting for response.
These may be delayed if a shadow copy is prepared."

How do I add my Custom Workflow Activity to FIM 2010 R2 SP1 installed on Windows 2012 server?

Hellos.
I have tried and failed to add my custom.dll into the Windows Server 2012 GAC.
We have a version of FIM 2010 R2 Sp1 running on Windows Server 2008 R2 and that was no problem. There seemed to be a gacutil.exe present on the system which added my assembly.
I cannot find gacutil.exe on the Windows 2012 Server.
I have downloaded and installed Windows SDK for Windows 8. However, when I try the gacutil.exe /i <myCustom.dll> nothing seems to happen.
Are there any guidelines how to add custom workflow activities to FIM when installed on a Windows Server 2012 system?
TIA
*HH

Well yes. It is fine when FIM is hosted on Windows Server 2008 R2.My difficulty is that I am using FIM 2010 R2 Sp1 and Windows Server 2012. No GACutility executable.
However, the problem has been resolved. Powershell can be used to modify the assemblies.
I opened a RunAs Administrator PS session. My assembly is in folder c:\Temp
Using Windows Explorer I browsed the folder c:\windows\assembly and noted the System.EnterpriseServices entries: version (2.0.0.0) and public key token (b03f5f7f11d50a3a)
(My version is 2.0.0.0 because when installing FIM and SharePoint 2013 the instructions I used suggested setting .Net version to be 2.0)
These powershell commands got me going...
PS C:\temp> [System.Reflection.Assembly]::Load("System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
GAC Version Location
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50...
PS C:\temp> $publish = New-Object System.EnterpriseServices.Internal.Publish
PS C:\temp> $publish.GacInstall("c:\temp\RunPowershellLibrary.dll")
PS C:\temp>
PS C:\temp>
PS C:\temp> iisreset
Amazingly I can see the assembly RunPowershellLibrary in my Windows 2012 GAC. :-)
Also, what is more cheering is that the custom activity actually works with FIM 2010 R2 Sp1.

How to change the root domain name in window 2012 server

Got a window 2012 server build up. My root domain name looks something like corp.marketing Well I seems to have missed to add the last .com or .local. How do I add the .com to my existing root domain name please. The server is new, will
go online in few days time. Thanks for all the help.

I have a similar question and not sure if this is the right place. I had set a server with corp.brighterworld.com but the install wizard anywhere access had me believe that microsoft's strongly preferred domain name prefix was remote.brighterworld.com so
I contacted GoDaddy and had it reissued as remote. but when I went to reconfigure for the new name. I had already set the server for being a CA, and in that process it issued like 4 or 5 certificates. So I had tried to rebuild the machine from scratch, but
the it didn't wipe everything, but rather saved previous state which left the old certificate stuff to be dealt with. Any hints or help out here for us having to learn this stuff the hard way?
Thanks,
Mark Saxton

Windows 7 SP1 client file lock on network share hosted ny WIndows 2012 Server

Hello
I have one strange problem after migration from Windows 2003 Server to Windows 2012 Server R2 Standard.
All migration tasks went well but two things do not work.
In Computer Management you have The Opened Files feature and if you open any file that is located on the network share hosted by Windows 2012 R2 form Windows 7 SP1 and then close it
it remains open in the Opened Files tab (even if you wait an hour). There is no problem with Windows XP SP3. The issue exist only with Windows 7.
The session view of sessions to the file server do not work. If I try to open it I get the message that the application is not responding.
Can someone help me with that ?
About the environment:
It is one server Domain migrated form 2003 to 2012R2.
The domain and forest level was raised to 2012 R2.
I have made clean install of Windows 2012 R2 and then migrated AD.
Best Regards
Sebastian Sala

Hi Sebastian,
>>There is no problem with Windows XP SP3. The issue exist only with Windows 7.
T>>he session view of sessions to the file server do not work. If I try to open it I get the message that the application is not responding.
Based on the description, please check event logs in Event Viewer to see if there were some related events logged. Besides, does this phenomenon happen all Windows 7 clients? We can try to restart the client to see if it helps.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 7 Client 'sees' an old version of windows 2012 server share

Hi All,
I have a problem which seems to be a common theme looking at other threads. Here's the overview of the problem:-
I have multiple windows 7 clients and a windows 8.1 client within a 2008 Server in a domain.
I also have a Windows 2012R2 Server which is not joined to the domain. There is a Share on the 2012R2 which has the Caching Option turned off. Everyone full control on Share & File permissions.
One of the Windows 7 machines in Explorer when it looks at
\\2012server\share sees an old version of the folder. It seems that SMB 2 chaching is working too well. Not even pressing F5 or clicking View, Refresh updates windows explorer.
It took a reboot to get the workstation to see the up to date contents of the share on the 2012 server.
We don't seem to have that behaviour with that client against the 2008 server.
I have seen this behaviour on another machine un-related to us at another location which was in a workgroup with a 2012 server and no domain.
Questions:-
Is there some sort of problem with Windows 7 workstations working against 2012 Servers in a non-domain setting or is it just Windows 7 against 2012 servers period?
I understand that Windows 7 utilises SMB1 & SMB2. SMB2 introduced caching. If the server has turned off the share cache option should the client cache the contents of the share or the information about the files & folders & 'file not found'
information?
I want to open a file handle to a file on a network share so I can read and write data to it. But I also want to know that when I look at the folder to open the file I'm actually looking at the live version of the folder and files in the folder and
not a cached version of the folder. If it's a cached version the file might be there already but I won't see it.
Is there an API call that tells the client to get a fresh view of the server share so I can be absolutely sure that when I look for a file on the server I'm getting the correct answer and not one from cache.
I first posted the question with the same subject "Windows 7 Client 'sees' an old version of windows 2012 server share" in the Windows 7 Networking Fourm
https://social.technet.microsoft.com/Forums/en-US/23bf3627-987b-4c27-8062-85a284a2cda4/windows-7-client-sees-an-old-version-of-windows-2012-server-share?forum=w7itpronetworking and it was suggested I repost in here. Please do take the time to read
the thread which will save time with suggestions that have already been covered.
As the computers that can be affected by this problem are not mine I cannot enforce or guarantee that any of my 'client base' will apply any hotfixes. I will also not have the ability to tweak registry settings as I can't guarantee Admin Access.
It seems that we need to go back to SMB1 as all the tweaks to SMB since those days have introduced problems with the basic requirement of sharing files from a share on a server for Read/Write purposes. I have tried turning a network back to SMB1 and that
has resolved a lot of the issues but then I found a post/MS blog that states not to leave the network on SMB1
The Caching option of the share had already been turned off. Surely Windows clients should not cache any information about the share but I think that is not the case.
Thanks is advance
Robert

Hi Shaon,
Thanks for looking into this.
If this is a known issue, why isn't the hotfix rolled into a general windows update if this is a known problem? However this doesn't just affect domain joined workstations.
Surely it's basic functionality for a networked computer to access files and folders on a network file server. It's what networks were invented for at the end of the day.
I am unable to apply hotfixes to these computers that are having the problem due to the fact they are not mine but my customers.
At one of my customers sites I disabled SMB2 from the server and network clients as well as disabling the network adapter power saving option. This seemed to resolve the issues that I saw on one client that seemed to be 30 minutes behind the rest of
the network. The hotfix you link to states that it is for Domain joined computers. At my customer site the PC's are not in a domain at all, just a workgroup with workstations and a 2012r2 server. Will the hotfix be applicable to non-domain machines?
Also many clients seemed to loose the file handle to an open file on the server. I'll get them to turn SMB2 back on at some point after I send out some updates but all the problems I see seem to be caused by the caching functions in SMB2. SMB1 is good and
stable. It's SMB2 that seems to be causing the problems as it was designed from the ground up for caching.
Has this networking issue been resolved in Windows 8, 8.1 and 10?
As I am unable to apply a hotfix to 1000's of PC's that are not mine, is there an API call or something where I can get the windows client to stop lying and get me the current state of a folder on the server?
Will Turning off ClientSideCaching fix the issue? HKLM\SYSTEM\CurrentControlSet\Services\MrxSmb\Parameters\
CSCEnabled
Or will every machine need to be tuned individually according to the following guide:-
https://social.technet.microsoft.com/Forums/windowsserver/en-US/7bd9978c-69b4-42bf-90cd-fc7541ccb663/forum-faq-troubleshooting-network-file-copy-slowness?forum=winserverPN ?
Robert

Migration from Small business server 2011 standad to Windows 2012 Server Standard

Hi everyone,
I have a network with SBS 2011 standard (that is the only server) and now we are moving (migrating) to windows 2012 server standard with an exchange 2013 (not yet installed).
The main thing is that when trying to install the migration tool on the SBS server, it will not install because it is not a 2008 R2 server.
is there a workaround for this problem?
I Hope this will help. Amir Ovadia

Hi,
Would you please first let me know how did you perform the migration? Regarding the migration tool, is it the Windows Server Migration Tools in Windows Server 2012 R2? Since you need to install
the Windows Server Migration Tools on the source SBS 2011 server, I suggest we could perform the following steps to install it.
Create deployment folders for ource computers by running the
smigdeploy.exe tool (included with Windows Server Migration Tools) on your destination server.
Register Windows Server Migration Tools on source computers that are running Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, or Windows
Server 2003 by using SmigDeploy.exe.
For details, please refer to the following article.
Install, Use, and Remove Windows Server Migration Tools
http://technet.microsoft.com/library/jj134202
In addition, here are some similar threads about how to perform the migration from SBS to Windows Server 2012 Standard, maybe they are useful to us.
how to Migrate sbs 2011 to Standard 2012 server
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server
Migrate SBS 2011 to Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard
Migrating from Windows SBS 2011 Essentials to Windows Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/41d17523-c6ae-4ba6-851f-a42b16f31d2a/migrating-from-windows-sbs-2011-essentials-to-windows-server-2012-standard
As there is no specific documentation on migrating from SBS to Windows server 2012, if you want the step by step procedure about the migration, we’d better involve
SBSMigration.com for detailed information.
Thanks.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Install Remote Desktop Services Failed on Windows 2012 Server

I understand RDS is not recommended on DC due to security consideration. However since I want to play it at home, it is not much a concern. Such scenario works fine on Windows 2008 R2. But on Windows 2012, the RDS (session-based, have not
tried VDI, but expect same result) installation always fails and is incomplete on DC.
In \Administrative Tools\Terminal Services, I only have RD Licensing Diagnoser and RD licensing manager. The remote desktop service management service cannot be started (Error code: 0x88250001). Is there any extra configuration needed for RDS
working on Server 2012 DC or before the installation? Thanks.
Update: this issue has been solved in Windows 2012 R2 Server. According to
http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
"Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller. In addition, we published
guidelines for how RD Session Host could be used without the RD Connection Broker."
The guidelines (http://support.microsoft.com/kb/2833839/en-us) primarily apply to Windows 2012 Server.

Asinine. Simply Asinine. Microsoft took it out because of $GREED$.
RemoteDesktop has become so popular, they had to break it to make more money. Thats why they discontinued SmallBusinessServer.   If this practice is so tabooo... Why did MS go the opposite direction with SBS 2011 Premium Cal's? SBS2011
had DC, Exchange, RDS and Sharepoint,SQL, RemoteWebWorkplace, OWA all working in perfect harmony. It is an untrue statement then, that it was "allowed but not recommended"
Now you by Server2012 (core + two virtual) and its not enough for all this.
You need at least another $700 for another sever licence to have it all
and who knows if SQL will run on a DC, or Exchange, or R-DERP server. Another reacherous bridge to cross.
By far, the absloute worse release since Millennium. The product is not ready for production, we broke our rule of waiting until the first SP1 upgrade for this and Exchange 2013. Problems with USB drivers and networking running extreamly slow.
Our 2003 SBS server was at least three times as fast, and this server has SAS and SSD drives running. It can't get out of its own way, and IE10 is the most unstable piece of crap to come out of Redmond. Open wide and swallow - Mother Microsoft
knows whats best for you. YOU WILL EAT OUR SLOP AND LEARN TO LIKE IT.   Server2012 AKA "METRO-SERVER"
Now here I sit after 50 Hours back to back setting up a new R-DERP server 2012, AD, Have my RDP licences in my hand at $100 each, and WTH does Microsoft care if I install it on my DC. ITS MY DC. And the cost savings versus the "risk" was
previously MY decision.
Sure, I can install a couple of Virtual HyperV sessions but they are so tempremental to a power-outage in a small business its not worth it. I have to double up my server hard drive resources, buy a $800 battery backup unit and make sure to attach
the cable, and even then, if that Bi**H does not shut down properly, one bit goes awry in a VHD or VHDX file and you are screwed. Restore from lastnights backup and forget about todays work. Not to mention it will probably take a half day to try
to fix it, then recover it then tell the 30 users they lost a days worth of work.
HYPER-V is for test servers and has no place in a small (micro) business environment. 5-30 users.
Microsoft's solution, buy another server. Need Exchange? Buy another server or take the risky cheapskate route and spin up some VHD's. Might as well put a gun to your head and play russian roulette, at least you know you have a one in six
chance of failure. With MS, its a 100% failure for a dirty shutdown power loss, motherboard blows, memory goes corrupt in a few years, your conventional method of recovery is gone, and you have some upchucked VHD file to try to recover some of TODAYS
data from.
Screw server 2012 forever.
I will sell 2008 and SBS2011 Premium unitl it rots in hell like XP (of which there is NOTHING wrong with for the average, WORD, EXCEL, OUTLOOK and QUICKBOOKS that all SMB's use. Its MS $GREED$ Grab the world by the B**ls and squeeze with all
your might to squeeze every dime you can out of *SMB* because big business is going to run thier 2003 Exchange and 2008 servers into ground before they switch to this garbage.
YOU CANNOT INSTALL EXCHANGE 2013 on DC , OR on R-DERP server.
Go buy another server license and server or MOVE TO THE CLOUD and get fleeced every month.
I have 30 DC/R-DERP/Exchange and SBS2011 Premium servers all running for years in perfect harmony, locked down with security so the users can't even WIGGLE with something they are not supposed to work with. They get their apps, cannot install anything
and all these servers are running just fine behind the firewall and perfectly save. The track record of this combination is 100% stable and is up 24/7/365 with no problems. Do yourself a favor and throw this 2012 into the river, you don't need
any weights because it is LEAD and will sink to the bottom by itself.
Why, you ask? Official is "Its for your protection" The real reason? To sell you more $700 server licences.
Maybe for SMB, we start selling Linux NAS Servers, host the Exchange in the cloud and be hearded like cattle to the Microsoft slaughterhouse. One way or another, you are going to bleed.    A little each month to move to the cloud, or
a small fortune if you want to have it in house. Microsoft wants it to be more expensive to have in house. No more buying a server and running it for six years before you upgrade. They can't have in house servers competing with their cloud,
and small businesses are the low hanging fruit ripe for the pickin'.

How do i change netbios name in windows 2012 server

Hi,
i have create Ad on windows 2012 server and i have enter netbios name with end 0. now problem is when try to access any user it show netbios name there. is it possible that i can change netbios name or why it show netbios name.
sunit kumar

Hi,
We can use the active directory rename tools to rename domain NetBIOS name. But it is a complex and risky process.
For more information about how to use random.exe to rename domain name, please refer to the following article:
Rendom
http://technet.microsoft.com/en-us/library/cc732097.aspx
Besides, renaming of the NetBIOS domain name is not supported in any version of Exchange Server.
For more information about this, the following threads can be referred to.
NetBios Name Change
https://social.technet.microsoft.com/Forums/en-US/2cd9d561-e737-43ee-b791-0501105b85e9/netbios-name-change?forum=winserverDS
Can we change our domain netbios name?
https://social.technet.microsoft.com/forums/windowsserver/en-US/989a8a16-7c8b-4787-8092-605de6b9d617/can-we-change-our-domain-netbios-name-
Best Regards,
Erin

Maximum LUN size for Windows 2012 server

Similar Messages

Maybe you are looking for