Maximum no of Line items for sales order,delivery document and billing docu

Dear friends,
How many line items we can enter for the following,
1) a Sales order
2) a Delivery document
3) a Billing Document
Thanks in advance.
Regards,
Shrikant

Hello,
the maximum limit of line items are as follows
order-9999
for delivery and invocie , it is restricted to 999 accouitng line items. since the tranfer to accounting can handle only 999 items , the restriction on delivery and invocie
ex if there are excise postings, for a single line , there might be 5/6 lines genetrated for each line in invocie , therfore as per this the line in invocie get restricted
you have a sap note , which offers suggestions to partially over come this
hope this helps
Thanks
akasha

Similar Messages

Maximum number of line items in sales order

hi,
Is there a limit on the maximum number of line items that are permitted in a sales order?
Thanks,
Shailaja

Hi
I think the correct reply would be 999,999 because data type of item number POSNR is NUM 6, which means that it can hold upto value 999,999.
However, at the same time keep the following into consideration:
1. FI document has a restriction of 999 line items per document. So, depending on the account settings, there will be a lower limit. E.g. if each Sales order line item results in 2 line items in the accounting document, then the max. no. of SO line items is limited to 499.
2. If FI summarization is active, then the system summarizes the account postings, thus reducing the no. of FI line items. Hence, a SO can accomodate more than 999 line items. However, this means that certain line item level details will not be available to the Finance guys (which they may not like).
3. As the number of line items in a Sales order increases, the system performance suffers greatly. There are performance fixes available, but in general, it is painful to load a SO with large no. of line times through BDC's. 10 Sales orders with 100 lines each consume less system resources than 1 Sales order with 1000 lines.

Reg WBS Element in Sales Order Line Item For Sales Order BOM

Hi ,
Greetings!!!!
I have a requirement, in a Sales Order I am Exploding BOM. After that Projects will be Created.
Once Project will be created i need to Assign WBS element for All Items in Sales Order.
My requirement is When I assign WBS element for Header Material (Parent Item) system will auto assign WBS for Child Items.
for this what Configuration I have to do.
Please do need full.
Thanks,
Regards,
Prasad.

Hi Dayananda
Check in transaction VTFL for given item category what copying routine are set. Check those copy routine and see if there is any data is being copied from table VBAP
Similar to above also check transaction VTFA for copying routine (if any)
As a standard SAP even we create an invoice with reference to the delivery document, still there are some data which is being copied from a sales order i.e. all pricing relevant information is copied from your sales order and not from delivery.

Maximum allowed line items for sales order

Hi All,
I am creating sales order thru' BAPI, I heard there is a constrain like only 999 line items allowed for one Sales Order.
Is there any such constrain is there in SAP. (if yes.. Is there any way to resolve the problem...)
I am working in SAP ECC 6.0 version.
Thanks in advance.
Regards

I have not heard of any particular limit imposed by SAP. The field length for line item number (POSNR) is 6 digits, so technically it is limited to 999,999 line items.
The item number assignment is, however, driven by the configuration. Some companies might choose to increase the number by, say, 10 (i.e. the line numbers will be 10, 20, 30, etc.), therefore limiting the total available lines. Note also that line item assignment is different on the billing document, so enough space should be allowed on the order to accomodate all the consequent documents.
An obvious solution is to split the large orders into several smaller ones to avoid running over the limit.

Maximum Line items in Sales order/ Delivery/ Invoice

Hi guru's
Maximum line items(SAP Standard) in the sales document/ Delivery Document / Invoice?
Thanks and Regards
Srinivas Kapuganti

Dear Srinivas
Why you want in sale order and delivery to restrict the number of line items and it will have no impact.
For Billing, you can achieve this. Go to IMG path -- Billing -> Billing Docs -> Country specific features --> Maintain Maximum Number of Billing Items. There select your sales organization and maintain the number of line items to flow in your billing document.
thanks
G. Lakshmipathi

How to get the texts for each line item for Sales order in a smartform

I'm createing a smart form in which i need to display certain texts for each line item of a sales order. How can i get those??
I'm trying with the table STXH and FM read_text... but i'm not clear how and what i'm getting... can anybody pls help me.....

Hi There,
But then i will be getting only the value. i want to link that against the particular material of the Purchase Order.
Like for ex:
PO No. Material Code        Line Item        Basic        Excise       Tax       Inv Value
0000001 5000251                010               100           16         4.64      120.64
0000001 5000252                020               200           32         9.28      241.28
Can u help me on this?
Regards,
Jitesh

MRP RUN for the more than one line item in sales order.

Hi ,
In the sales order nuber of line item are , i will have to take MRP RUN for selected line item .
So plz suggest what development will require?
Abhay
Edited by: abhay patil on May 30, 2008 8:52 AM

HI,
U can write separate prog. Which will ask sales order no. and from to line item or multiple line item of sale order. Then in loop internally pass the each line item no to MD50 prog. Which will run in background.
I will give u sample prog. Which I had created for running MRP for all the lines items of given sales order in one go.
*& Report ZPRG_PP_001
REPORT ZPRG_PP_001.
tables vbak.
data: begin of it_vbap occurs 1,
        vbeln type    vbap-vbeln,
        posnr type    vbap-posnr,
      end   of it_vbap.
DATA: P_MODE   TYPE    C.
      Batchinputdata of single transaction
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
selection-screen begin of block b1 with frame title text-001.
parameters :   p_vbeln like vbak-vbeln obligatory.
selection-screen skip.
parameters :   p_fore   radiobutton group mode,
                 p_back   radiobutton group mode default 'X'.
selection-screen end   of block b1.
at selection-screen.
Check Sales Order
if not p_vbeln is initial.
    select single * from vbak
      where vbeln eq p_vbeln.
    if sy-subrc <> 0.
      message e499(sy) with 'Invalid Sales Order no.' p_vbeln.
    endif.
endif.
start-of-selecTION.
Get Sales order items
select vbeln posnr from vbap
    into table it_vbap
    where vbeln eq p_vbeln.
Set BDC mode
if p_back eq 'X'.
    p_mode = 'E'.
else.
    p_mode = 'A'.
endif.
Process MD50 BDC
LOOP AT IT_VBAP.
    perform bdc_dynpro      using 'SAPMM61X' '0160'.
    perform bdc_field       using 'BDC_CURSOR' 'RM61X-TRMPL'.
    perform bdc_field       using 'BDC_OKCODE' '/00'.
    perform bdc_field       using 'RM61X-KDAUF' IT_VBAP-VBELN.
    perform bdc_field       using 'RM61X-KDPOS' IT_VBAP-POSNR.
    perform bdc_field       using 'RM61X-BANER' '1'.
    perform bdc_field       using 'RM61X-LIFKZ' '3'.
    perform bdc_field       using 'RM61X-PLMOD' '3'.
    perform bdc_field       using 'RM61X-TRMPL' '1'.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_OKCODE'   '=XBAC'.
    CALL TRANSACTION 'MD50' USING BDCDATA MODE P_MODE.
    CLEAR BDCDATA.
    REFRESH BDCDATA.
ENDLOOP.
end-of-selection.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM.
Ajay P. Nikte

How to get Characteristic Values assigned to the line item of Sales Order?

Hi,
I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
this fn. mod. giving all the Characters but not the assigned characteristic values.
Is there any other way to find characteristic values of sales order.
Thanks,
vinayak.
Message was edited by: vinayaga sundaram

For example, please see this example program.
It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
report zrich_0001.
* Internal Table for Characteristic Data
data: begin of i_char occurs 0.
        include structure comw.
data: end of i_char.
data: xcabn type cabn.
data: begin of xcawn,
      atwtb type cawnt-atwtb,
      end of xcawn.
data: xvbap type vbap.
parameters: p_vbeln type vbap-vbeln,
            p_posnr type vbap-posnr.
start-of-selection.
select single * from vbap into xvbap
             where vbeln = p_vbeln
               and posnr = p_posnr.
clear i_char. refresh i_char.
* Retrieve Characteristics.
call function 'CUD0_GET_VAL_FROM_INSTANCE'
       exporting
            instance           = xvbap-cuobj
       tables
            attributes         = i_char
       exceptions
            instance_not_found = 1.
loop at i_char.
    clear xcabn.
    select single * from cabn into xcabn
             where atinn = i_char-atinn.
    clear xcawn.
    select single cawnt~atwtb into xcawn
               from cawn
                 inner join cawnt
                   on cawn~atinn = cawnt~atinn
                  and cawn~atzhl = cawnt~atzhl
                      where cawn~atinn = i_char-atinn
                        and cawn~atwrt = i_char-atwrt.
    write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
endloop.
Regards,
RIch Heilman

How to release Stock blocked against deleted line items from Sales order.

We have Scenario as follows.
Sales order made for items available in stock. Deleted few lineitems from sales order balance items delivered and invoiced. Sales cycle is complete in all sense.
What we have noticed is when we are creating new sales order / Delivery for deleted items from above Sales order it shows deleted quantity is blocked against old sales order. These line items are no longer
available in old sales order since it is deleted also it is not appearing in open sales order report (VA05).
Overall stock available is same as quantity mentioned in deleted line item.
In MD04 - Sales requirenment transaction it shows sales order / line item against which it is blocked.
i.e deleted line item.
How to release these stock and make available for sales. Any standard process available ? or any other solutions
Thanks & Regards,

I got a solution for my question from other forum. for info
Go to SE38 and enter program SDRQCR21 then execute...
Enter line item which is blocked for sales order in MD04 and enter plant then check Data
transfer box and uncheck other boxes... It will pop up information and click yes...
You will get one report and Stock inconsistency will go off and then check it in MD04....
regards

Add Line Item In Sales Order VA01

HI All,
I have new requirement in creation of sales order . Here we have free promotion sales . Here if customer buy one material then he will get some other material as free .In standard sap we can give only one line item as free not more than that .
Here our requirement is more than one line item . I suggested them maintain all the free materials in one Ztable when ever the original material will come for sales order then i have to fetch these materials from ztable automatically and it should create sales order. I started doing this using user exit FORM USEREXIT_MOVE_FIELD_TO_VBAP.
These are the below links i checked in our sdn.
Adding Line items to sales order on creation using User-Exit in VA01.
Please give me some idea on this .
Regards,
Madhu.

Hi Asik,
Thanks for your reply.In my case i can not got for Bom because the schemes will change for every ten days. I think Bom creation will fill a lot of data but it wont solve my issue.
Regards,
Madhu.

How to add 100 line item in sales order at one time

Hello Guru's
My requirement is to add 100 line items in sales order at once.
what can be good approach to overcome this situation.Is there some kind of tool which can be useful?
Let me know your suggestions
Thanks a lot in Advance

Hi,
do configuration for Proposal Items tab - like -
then create sales order using with Propose items button - VA01 - then system will accept more than 50 line of materials at a time
Please Use BAPI -- creation of Sales order
Thanking you
Regards
Mahesh

To add the line item in Sales Order

Hi Experts,
I have to insert the line item between two line item in sales order dynamically.
How should i do this.
any idea??
Thanks in Advance.

Hi,
I guess you are talking about BOM, sub-items or free goods, wherein after you put in one item the other material defined gets added automatically in the sales order.
That is done with the help of Item Category config by functional person.
Check here for more info
[Item Category|Re: Item Category;
You can also use user exit MV45AFZZ form user_exit_move_to_vbap for a specific logic defined at runtime.
Regards,
Amit
Edited by: Amit Iyer on Aug 26, 2009 10:21 PM

Delete the line item in sales order in VA01/VA02 when the quantity is modif

Hi SAP,
I have requirement to delete a line item in sales order.Please suggest me to do the same.
THe scenarios is , we are inserting a free good line item based on some condition and quantity, If the quantity is modified the free good line item inserted needs to be deleted.
Waiting for your responce
Thanks,
Billa
Moderator message : Spec dumping is not allowed,search for available information. Thread locked.
Edited by: Vinod Kumar on Nov 14, 2011 1:54 PM

Hi,
Can you also check the SALES LINE.
Sales line is the combination of SALES ORGANISATION + DISTRIBTION CHANNEL +PLANT.
Hope it was not maintained.
Transaction code : OVX6
PATH: IMG->ENTERPRISE STRCTRE->ASSIGNMENT>SALES AND DISTRIBTION->ASSIGN SALES ORG- DISTRIBTION-PLANT.
please revert if the error still exists.
santosh

Mrp run on no of line items in sale order

hi all
i have a sale order with o line items include.
i want to run mrp on sale order only (not want to use MD50)
can i use user exit for this task ? if so please advise which user exit i can use ?
thanks

Dear,
Please refer this link,
[Mrp run on no of line items in sale order|Re: MD50 issue]
Regards,
R.Brahmankar

Automatically add line-items to Sales order

Hello,
Our client needs us to add line items to sales orders. The requirement is such that, when the users enter a material on a line item, they wish to see few more materials automatically added as new line items -- item category to be maintained as "Free" items. This appears similar to automatically getting BOM-sub-items for materials which have BOMs maintained. The client is not willing to maintain BOMs for materials in question. They instead have asked us to maintain sub-item materials in a Z-table and then fetch those to populate the subsequent line-items on the sales order.
So far, we have tried to fiddle around with the XVBAK and XVBAP internal tables in sales exit (MV45AFZZ) and also tried to use BAPI within the same exit. Both methods do not work.
Could you please guide us ? Thank you.
Regards,

Hi,
I think you can try with product proposal(Item Proposal). T.Code:VA51.
Using this one can create list of items to be proposed at the time sales order processing.
Item proposal contains list of items with or without default quantities those were frequently ordered by the customer. You can create any no of items in an Item proposal.Like wise you can create any no.of item proposals.
But,You can assign only one item proposal per customer in sales tab of the CMR.So that when ever you are creating order for that customer you can access those materials which are listed in an Item proposal completely or selectively,with or without default quantities.
The items which are proposed from an Item proposal are always changeable.
Item proposal makes sales order processing simple and fast.
Only the thing here is it will not automatically explode like in case of BOM.You have to manually select those items from an item proposal.
Regards,
Revan
Edited by: REVAN on Dec 23, 2008 10:55 AM

Maximum no of Line items for sales order,delivery document and billing docu

Similar Messages

Maybe you are looking for